Gold‐Catalyzed Transannular [4+3] Cycloaddition Reactions

Macrocyclic propargyl acetates containing a furan ring were prepared by using a CrCl₂‐promoted reaction. In the presence of either a Au^I or Au^III catalyst, a tandem 3,3‐rearrangement/transannular [4+3] cycloaddition reaction occurred to give propargyl acetates that are regio‐ and diastereospecific. The regiochemistry of the product is controlled by the position of the acetoxy group in the starting material and the stereochemistry of the reaction depends on the ring size.     

Facile synthesis of a tricyclohexylphosphine‐stabilized η3‐allyl‐carboxylato Ni(II) complex and its relevance in electrochemical butadiene carbon dioxide coupling

With the reaction of bis(1,5‐cyclooctadiene)nickel(0) and trans‐penta‐2,4‐dienoic acid in the presence of tricyclohexylphosphine, a new more general method was developed to synthesize cyclic π³‐allyl‐carboxylato Ni(II) complexes, which are known to be intermediates in the C? C coupling of butadiene and CO₂. The cyclic π³‐allyl‐carboxylato Ni(II) complex obtained is tested as a mediator in the electrochemical coupling reaction of butadiene and carbon dioxide. We also demonstrate the dependency on the coordination sphere by using platinum instead of nickel as the metal center. Copyright © 2005 John Wiley & Sons, Ltd.     

Development and application of latent hydrosilylation catalysts [2]—Control of catalytic activity of platinum catalyst by polystyrene derivatives having propargyl moieties

A new thermal latent hydrosilylation catalyst on the basis of H₂PtCl₆ and polystyrene derivatives having propargyl moieties is described. The polystyrene derivatives having various propargyl moieties were obtained by the reaction of propargyl alcohols with poly(p‐chloromethylstyrene) or its copolymer with styrene. The polymer‐supported platinum catalysts were prepared by aging H₂PtCl₆ with these polymers in tetrahydrofuran at 30 °C for 12 h. In the presence of the polymers, the hydrosilylation activity of H₂PtCl₆ was found to be controlled thermally in the model reaction of trimethylsilane and triethylvinylsilane. Effective control of the crosslinking reaction of silicone resin was also achieved by using these latent catalyst systems. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 35–42, 2000     

Synthesis and photochemical reaction of novel p-alkylcalix[n]arene derivatives containing cationically polymerizable groups

New photoreactive p-methylcalix[6]arene (MCA) derivatives containing cationically polymerizable groups such as propargyl ether (calixarene 1), allyl ether (calixarene 2), and ethoxy vinyl ether (calixarene 3) groups were synthesized with 80, 74, and 84% yields by the substitution reaction of MCA with propargyl bromide, allyl bromide, and 2-chloroethyl vinyl ether (CEVE), respectively, in the presence of either potassium hydroxide or sodium hydride by using tetrabutylammonium bromide (TBAB) as a phase transfer catalyst (PTC). The p-tert-butylcalix[8]arene (BCA) derivative containing ethoxy vinyl ether groups (calixarene 4) was also synthesized in 83% yield by the substitution reaction of BCA with CEVE by using sodium hydride as a base and TBAB as a PTC. The MCA derivative containing 1-propenyl ether groups (calixarene 5) was synthesized in 80% yield by the isomerization of calixarene 2, which contained allyl ether groups, by using potassium tert-buthoxide as a catalyst. The photochemical reactions of carixarene 1, 3, 4, 5, and 6 were examined with certain photoacid generators in the film state. In this reaction system, calixarene 3 containing ethoxy vinyl ether groups showed the highest photochemical reactivity when bis-[4-(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) (DPSP) was used as the catalyst. On the other hand, calixarene 1 containing propargyl ether groups had the highest photochemical reactivity when 4-morpholino-2,5-dibuthoxybenzenediazonium hexafluorophosphate (MDBZ) was used as the catalyst. It was also found that the prepared carixarene derivatives containing cationically polymerizable groups such as propargyl, allyl, vinyl, and also 1-propenyl ethers have good thermal stability. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1805–1814, 1999     

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide is described. In the reaction with allyl bromide, either a Pd(dba)₂? CuI combination (dba, dibenzylideneacetone) in DMF or copper(I) iodide in DMSO–THF readily catalyzes or mediates the coupling reaction of (Z)‐silyl(stannyl)ethenes at room temperature, producing novel vinylsilanes bearing an allyl group β to silicon with cis ‐disposition in good yields. Allyl chlorides as halides can be used in the CuI‐mediated reaction. CuI alone much more effectively mediates the cross‐coupling reaction with propargyl bromide in DMSO–THF at room temperature compared with a Pd(dba)₂? CuI combination catalysis in DMF, providing novel stereodefined vinylsilanes bearing an allenyl group β to silicon with cis ‐disposition in good yields. Copyright © 2008 John Wiley & Sons, Ltd.     

Ruthenium‐Catalyzed Oxidant‐Free Allylation of Aromatic Ketoximes with Allylic Acetates at Room Temperature

Substituted aromatic ketoximes reacted efficiently with allylic acetates in the presence of {[RuCl₂(p‐cymene)]₂} and AgSbF₆ in 1,2‐dichloroethane at ambient temperature, providing ortho‐allyl aromatic ketoximes in a highly regioselective manner without an oxidant. In the reaction, the acetate group of allyl acetate acts as a base to activate the C?H bond of aromatics. Later, ortho‐allyl aromatic ketoximes were converted into ortho‐allyl aromatic ketones in the presence of HCl.     

Stereoselective Synthesis of (Z)‐ and (E)‐Allyl Aryl Sulfides and Selenides from Baylis?Hillman Acetates under Neutral Conditions Using β‐Cyclodextrin in Water

The first example of the stereoselective synthesis of (Z)‐ and (E)‐allyl aryl sulfides and selenides from Baylis? Hillman acetates under neutral conditions in H₂O by supramolecular catalysis involving β‐cyclodextrin is reported. β‐Cyclodextrin can be recovered and reused. The reaction is very efficient in providing allyl aryl sulfides and selenides in good‐to‐excellent yields with clean reaction profiles under mild reaction conditions.     

Platinum‐Catalyzed Friedel–Crafts‐Type C−H Coupling–Allylic Amination Cascade to Synthesize 3,4‐Fused Tricyclic Indoles

A novel platinum‐catalyzed cascade cyclization reaction was developed by intramolecular Friedel–Crafts‐type C?H coupling of aniline derivatives with a propargyl carbonate unit‐allylic amination sequence. Treatment of various propargyl carbonates tethered to meta‐aniline derivatives with a Pt(dba)₃/DPEphos catalyst system afforded the corresponding 3,4‐fused tricyclic 3‐alkylidene indolines in 42–99 % yield, which were transformed into 3,4‐fused indole derivatives by reaction with trifluoroacetic acid. The reaction products exhibited antiproliferative activities against cancer cells, but not normal cells, revealing the potential usefulness of this reaction for medicinal chemistry.     

Synthesis of Allyl Aryl Sulfone Derivatives from Baylis?Hillman Acetates in Water

Various phenyl and p‐tolyl allyl sulfone derivatives were prepared stereoselectively by reacting Baylis? Hillman acetates with sodium 4‐R‐benzenesulfinate (R=H, Me) in H₂O. The reaction was very efficient in providing the corresponding sulfone derivatives in good to excellent yields (Table).     

Platinum‐Catalyzed Multi‐Step Reaction of Propargyl Alcohols with N‐Heteroaromatics

N‐Methyl indole reacts with but‐2‐yn‐1‐ol in the presence of PtCl₂ in MeOH giving indole derivatives having a substituted 3‐oxobutyl group at the 3‐position in good yield. Under the reaction conditions, various substituted indoles and substituted propargyl alcohols are successfully involved in the reaction giving the corresponding addition products in good to moderate yields. The catalytic reaction can be further extended to N‐phenyl pyrrole. In the present multi‐step reaction, PtCl₂ likely plays dual roles: as the catalyst for the rearrangement of propargyl alcohols to the corresponding alkenyl ketones and as the catalyst for the addition of indoles to the alkenyl ketones. Experimental evidence is provided to support the proposed mechanism.     

Nickel-catalyzed acylstannylation and alkynylstannylation of 1,2-dienes

Carbostannylation of 1,2-dienes using acyl- and alkynylstannanes was achieved by means of nickel catalysis. In particular, acylstannylation of 1,2-dienes could be carried out with bis(1,5-cyclooctadiene)nickel [Ni(cod)₂] and acylstannanes to give selectively α-acylmethyl(vinyl)stannanes. The reaction was also applicable to acylstannanes prepared in situ by protonolysis of α-alkoxyalkenylstannanes or by reactions of α-silyloxyvinylstannanes with aldehyde acetals. For alkynylstannylation, a combination of Ni(cod)₂ and 1,3-bis(diphenylphosphino)propane (dppp) was found to be effective to afford α-alkynylmethyl(vinyl)stannanes, whereas the Ni(cod)₂-1,3-bis(dimethylphosphino)propane (dmpp) catalyst switched the regioselectivity to give (Z)-α-alkynylmethyl(alkenyl)stannanes. The acylstannylation products were successfully converted into various conjugated or unconjugated enones by a combination of cross-coupling and NaH-catalyzed isomerization. The alkynylstannylation products were transformed by cross- or homo-coupling reactions to various enynes or 2,3-bis(alkynylmethyl)-1,3-dienes, versatile precursors for variously substituted polycyclic compounds.     

Chemoselective Borane‐Catalyzed Hydroarylation of 1,3‐Dienes with Phenols

A B(C₆F₅)₃‐catalyzed hydroarylation of a series of 1,3‐dienes with various phenols has been established through a combination of theoretical and experimental investigations, affording structurally diverse ortho‐allyl phenols. DFT calculations show that the reaction proceeds through a borane‐promoted protonation/Friedel–Crafts pathway involving a π‐complex of a carbocation–anion contact ion pair. This protocol features simple and mild reaction conditions, broad functional‐group tolerance, and low catalyst loading. The obtained ortho‐allyl phenols could be further converted into flavan derivatives using B(C₆F₅)₃ with good cis diastereoselectivity. Furthermore, this transformation was applied in the late‐stage modification of pharmaceutical compounds.     

Micron‐granula polyolefin with self‐immobilized nickel and iron diimine catalysts bearing one or two allyl groups

Self‐immobilized nickel and iron diimine catalysts bearing one or two allyl groups of [ArN?C]₂(C₁₀H₆)NiBr₂ [Ar = 4‐allyl‐2,6‐(i‐Pr)₂C₆H₂] ( 1 ), [ArN?C(Me)][Ar′N? C(Me)]C₅H₃NFeCl₂ [Ar = Ar′ = 4‐allyl‐2,6‐(i‐Pr)₂C₆H₃, Ar = 2,6‐(i‐Pr)₂C₆H₃, and Ar′ = 4‐allyl‐2,6‐(i‐Pr)₂C₆H₃] were synthesized and characterized. All three catalysts were investigated for olefin polymerization. As a result, these catalysts not only showed high activities as the catalyst free from the allyl group, such as [ArN?C]₂C₁₀H₆NiBr₂ (Ar = 2,6‐(i‐Pr)₂C₆H₂)], but also greatly improved the morphology of polymer particles to afford micron‐granula polyolefin. The self‐immobilization of catalysts, the formation mechanism of microspherical polymer, and the influence on the size of the particles are discussed. The molecular structure of self‐immobilized nickel catalyst 1 was also characterized by crystallographic analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1018–1024, 2004     

Gold(I)‐Catalyzed Divergence in the Preparation of Bicyclic Enol Esters: From Exclusively [3C+2C]‐Cycloaddition Reactions to Exclusive Formation of Vinylcyclopropanes

With the use of benzonitrile‐stabilized Au^I catalyst [Au(IPr)(NCPh)]SbF₆ ( Ic ; IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene), a spectrum of reactivity is observed for propargyl ester 4 a with cyclic vinyl ethers, ranging from exclusively [3C+2C] cycloaddition reactions to exclusively cyclopropanation depending only on the structure of the substrate. Some initially formed cyclopropanation products rearrange into the corresponding formally [3C+2C] cycloaddition products after treatment with fresh Au^I complex at 80 °C. Vinylcyclopropanes formed from dihydrofuran and dihydropyran resisted such rearrangement, even in the presence of fresh Au^I catalyst at elevated temperature. This study addresses an important mechanistic question concerning whether the five‐membered‐ring products were produced by a direct [3C+2C] cycloaddition reaction or by a sequential cyclopropanation/ring‐expansion reaction. A dual pathway is proposed for the Au^I‐catalyzed reactions between propargyl esters and cyclic vinyl ethers. The different behavior among vinyl cyclic ethers is attributed to the difference in the polarization of the π bond. Highly polarized bonds appear to undergo the cycloaddition reaction whereas less polar π‐bonds produce cyclopropanes.     

Palladium-catalyzed and samarium-promoted coupling of stereochemically-biased allylic acetates with carbonyl compounds

Stereochemically-biased bicyclic allylic acetates endo- and exo-1 were shown as being allyl donors for Pd-catalyzed carbonyl allylation using stoichiometric quantities of samarium diodide. Cyclopentenyl acetate and bicyclic derivatives 1 react with cyclic ketones in the presence of SmI₂ without requirement of palladium catalysis. Use of enantiomerically enriched substrate suggests that the reaction goes through a π-allyl samarium complex. However, this reactivity appears to be restricted to strained cyclopentenyl acetates since other linear and cyclic allylic acetates do not give the carbonyl allylation product.     

Synthetic Reactions Using Low‐valent Titanium Reagents Derived from Ti(OR)4 or CpTiX3 (X = O‐i‐Pr or Cl) in the Presence of Me3SiCl and Mg

In the presence of Me₃SiCl, Ti(OR)₄ or CpTiX₃ (X = O‐i‐Pr or Cl) is reduced by Mg powder in THF to gradually generate a specific low‐valent titanium (LVT) species that mediates several synthetic reactions. The LVT‐catalyzed C–O bond‐cleaving reactions of allyl and propargyl ethers and esters generate parent alcohols and carboxylic acids, respectively. O‐allyl and propargyl carbamates are also readily deprotected by the LVT to afford parent amines. In addition, the respective reductive N–S or O–S bond cleavage of sulfonamides or sulfonyl esters mediated by the LVT was developed as a novel facile deprotection method. The reagent catalyzes intra‐ and intermolecular alkyne or alkyne/nitrile cycloaddition to produce substituted benzenes and pyridines, while epoxides and oxetanes are reduced to alcohols via an LVT‐mediated homolytic ring opening. The McMurry coupling of aryl aldehydes and ketones proceeds with the LVT under homogeneous and mild reaction conditions and is effective for the polymerization of aromatic dialdehydes, generating conjugated polymers. Finally, imino‐pinacol coupling of imines is mediated by the LVT to provide 1,2‐diamines.     

Mild procedure for the catalytic bis(stannylation) of alkynes with hexaalkylditins

[reaction: see text] Bis(stannylation) of terminal alkynes is achieved through the use of a palladium-isonitrile catalyst complex using a hexaalkylditin as a stannyl group transfer reagent in an atom-efficient and mild catalytic process. Functional group tolerance is good, allowing the presence of amine, carbamate, silyl, ester, and ether moieties. An activated internal alkyne also underwent bis(stannylation) in moderate yield, allowing access to symmetrical bis(alkenyl)stannanes.     

Manganese(III) Salen Complex Immobilized on Fe3O4 Magnetic Nanoparticles: The Efficient,Green and Reusable Nanocatalyst

A new Fe₃O₄ magnetic nanoparticles supported manganese salen complex was successfully prepared by attaching manganese acetates to a novel N,N′‐bis(salicylidine)ethylenediamine ligand functionalized Fe₃O₄. The as‐prepared catalyst was characterized by TGA, XRD, FTIR, VSM, and TEM. It was found to be an efficient catalyst for the synthesis of benzopyranopyrimidines in aqueous medium. High catalytic activity and ease of recovery from the reaction mixture using external magnet, and several reuse times without significant losses in performance are additional eco‐friendly attributes of this catalytic system.     

Synthesis of 1,2-Bis[propargyl(or allyl)oxy]cycloalkanes

Reactions of cyclic olefins with propargyl and allyl alcohols in the presence of crystalline iodine and a catalytic amount of Ag₃PW₁₂O₄₀ afforded in one step trans-1,2-bis[propargyl(allyl)oxy]cycloalkanes.     

α‐Diamine Nickel Catalysts with Nonplanar Chelate Rings for Ethylene Polymerization

A series of novel α‐diamine nickel complexes, (ArNH‐C(Me)‐(Me)C‐NHAr)NiBr₂, 1 : Ar=2,6‐diisopropylphenyl, 2 : Ar=2,6‐dimethylphenyl, 3 : Ar=phenyl), have been synthesized and characterized. X‐ray crystallographic analysis showed that the coordination geometry of the α‐diamine nickel complexes is markedly different from conventional α‐diimine nickel complexes, and that the chelate ring (N‐C‐C‐N‐Ni) of the α‐diamine nickel complex is significantly distorted. The α‐diamine nickel catalysts also display different steric effects on ethylene polymerization in comparison to the α‐diimine nickel catalyst. Increasing the steric hindrance of the α‐diamine ligand by substitution of the o‐methyl groups with o‐isopropyl groups leads to decreased polymerization activity and molecular weight; however, catalyst thermal stability is significantly enhanced. Living polymerizations of ethylene can be successfully achieved using 1 /Et₂AlCl at 35 °C or 2 /Et₂AlCl at 0 °C. The bulky α‐diamine nickel catalyst 1 with isopropyl substituents can additionally be used to control the branching topology of the obtained polyethylene at the same level of branching density by tuning the reaction temperature and ethylene pressure.