Hydrophobic End‐Modulated Amino‐Acid‐Based Neutral Hydrogelators: Structure‐Specific Inclusion of Carbon Nanomaterials

Hydrophobic end‐modulated l ‐phenylalanine‐containing triethylene glycol monomethyl ether tagged neutral hydrogelators ( 1 – 4 ) are developed. Investigations determine the gelators’ structure‐dependent inclusion of carbon nanomaterials (CNMs) in the self‐assembled fibrillar network (SAFIN). The gelators ( 1 , 3 , and 4 ) can immobilize water and aqueous buffer (pH 3–7) with a minimum gelator concentration of 10–15 mg mL^?1. The hydrophobic parts of the gelators are varied from a long chain (C‐16) to an extended aromatic pyrenyl moiety, and their abilities to integrate 1 D and 2 D allotropes of carbon (i.e., single‐walled carbon nanotubes (SWNTs) and graphene oxide (GO), respectively) within the gel are investigated. Gelator 1 , containing a long alkyl chain (C‐16), can include SWNTs, whereas the pyrene‐containing 4 can include both SWNTs and GO. Gelator 3 fails to incorporate SWNTs or GO owing to its slow rate of gelation and possibly a mismatch between the aggregated structure and CNMs. The involvement of various forces in self‐aggregated gelation and physicochemical changes occurring through CNM inclusion are examined by spectroscopic and microscopic techniques. The distinctive pattern of self‐assembly of gelators 1 and 4 through J‐ and H‐type aggregation might facilitate the structure‐specific CNM inclusion. Inclusion of SWNTs/GO within the hydrogel matrix results in a reinforcement in mechanical stiffness of the composites compared with that of the native hydrogels.     

Self‐assembled graphene oxide–gelatin nanocomposite hydrogels: Characterization,formation mechanisms,and pH‐sensitive drug release behavior

Novel physically crosslinked graphene oxide (GO)‐gelatin nanocomposite hydrogels were obtained by self‐assembly. The hydrogels with various ratios of GO to gelatin were prepared, and characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, and scanning electron microscopy. The static and dynamic rheological properties of the hydrogels were investigated, along with the underlying hydrogel formation mechanisms. The storage modulus of the hydrogels (containing 98–98.5 wt % water) reached 114.5 kPa, owing to the relatively strong physical bonding (i.e., hydrogen bonding and electrostatic forces) between GO and gelatin. Drug release tests showed that the drug release from the hydrogel was pH‐dependent, with 96% of the model drug released in a neutral environment, compared to 28% released in an acidic medium. These hydrogels could have potential in pH‐sensitive drug delivery. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 356–367     

Molecular Hydrogels from Bolaform Amino Acid Derivatives: A Structure–Properties Study Based on the Thermodynamics of Gel Solubilization

Insight is provided into the aggregation thermodynamics associated to hydrogel formation by molecular gelators derived from L ‐valine and L ‐isoleucine. Solubility data from NMR measurements are used to extract thermodynamic parameters for the aggregation in water. It is concluded that at room temperature and up to 55 °C, these systems form self‐assembled fibrillar networks in water with quite low or zero enthalpic component, whereas the entropy of the aggregation is favorable. These results are explained by considering that the hydrophobic effect is dominant in the self‐assembly. However, studies by NMR and IR spectroscopy reveal that intermolecular hydrogen bonding is also a key issue in the aggregation process of these molecules in water. The low enthalpy values measured for the self‐assembly process are ascribed to the result of a compensation of the favorable intermolecular hydrogen‐bond formation and the unfavorable enthalpy component of the hydrophobic effect. Additionally, it is shown that by using the hydrophobic character as a design parameter, enthalpy‐controlled hydrogel formation, as opposed to entropy‐controlled hydrogel formation, can be achieved in water if the gelator is polar enough. It is noteworthy that these two types of hydrogels, enthalpy‐versus entropy‐driven hydrogels, present quite different response to temperature changes in properties such as the minimum gelator concentration (mgc) or the rheological moduli. Finally, the presence of a polymorphic transition in a hydrogel upon heating above 70 °C is reported and ascribed to the weakening of the hydrophobic effect upon heating. The new soft polymorphic materials present dramatically different solubility and rheological properties. Altogether these results are aimed to contribute to the rational design of molecular hydrogelators, which could be used for the tailored preparation of this type of soft materials. The reported results could also provide ground for the rationale of different self‐assembly processes in aqueous media.     

Phenylboronic Acid Appended Pyrene‐Based Low‐Molecular‐Weight Injectable Hydrogel: Glucose‐Stimulated Insulin Release

A pyrene‐containing phenylboronic acid (PBA) functionalized low‐molecular‐weight hydrogelator was synthesized with the aim to develop glucose‐sensitive insulin release. The gelator showed the solvent imbibing ability in aqueous buffer solutions of pH values, ranging from 8–12, whereas the sodium salt of the gelator formed a hydrogel at physiological pH 7.4 with a minimum gelation concentration (MGC) of 5 mg mL^?1. The aggregation behavior of this thermoreversible hydrogel was studied by using microscopic and spectroscopic techniques, including transmission electron microscopy, FTIR, UV/Vis, luminescence, and CD spectroscopy. These investigations revealed that hydrogen bonding, π–π stacking, and van der Waals interactions are the key factors for the self‐assembled gelation. The diol‐sensitive PBA part and the pyrene unit in the gelator were judiciously used in fluorimetric sensing of minute amounts of glucose at physiological pH. The morphological change of the gel due to addition of glucose was investigated by scanning electron microscopy, which denoted the glucose‐responsive swelling of the hydrogel. A rheological study indicated the loss of the rigidity of the native gel in the presence of glucose. Hence, the glucose‐induced swelling of the hydrogel was exploited in the controlled release of insulin from the hydrogel. The insulin‐loaded hydrogel showed thixotropic self‐recovery property, which hoisted it as an injectable soft composite. Encouragingly, the gelator was found to be compatible with HeLa cells.     

Thermo- and pH-Responsive Gelatin/Polyphenolic Tannin/Graphene Oxide Hydrogels for Efficient Methylene Blue Delivery

Gelatin (GE), amino-functionalized polyphenolic tannin derivative (TN), and graphene oxide (GO) were associated to yield thermo- and pH-responsive hydrogels for the first time. Durable hydrogel assemblies for drug delivery purposes were developed using the photosensitizer methylene blue (MB) as a drug model. The cooling GE/TN blends provide brittle physical assemblies. To overcome this disadvantage, different GO contents (between 0.31% and 1.02% wt/wt) were added to the GE/TN blend at 89.7/10.3 wt/wt. FTIR and RAMAN spectroscopy analyses characterized the materials, indicating GO presence in the hydrogels. Incorporation studies revealed a total MB (0.50 mg/mL) incorporation into the GE/TN-GO hydrogel matrices. Additionally, the proposed systems present a mechanical behavior similar to gel. The GO presence in the hydrogel matrices increased the elastic modulus from 516 to 1650 Pa. SEM revealed that hydrogels containing MB present higher porosity with interconnected pores. Dissolution and swelling degree studies revealed less stability of the GE/TN-GO-MB hydrogels in SGF medium (pH 1.2) than SIF (pH 6.8). The degradation increased in SIF with the GO content, making the polymeric matrices more hydrophilic. MB release studies revealed a process controlled by Fickian diffusion. Our results point out the pH-responsible behavior of mechanically reinforced GE/TN-GO-MB hydrogels for drug delivery systems purposes.     

Graphene Oxide/Polyacrylamide/Aluminum Ion Cross‐Linked Carboxymethyl Hemicellulose Nanocomposite Hydrogels with Very Tough and Elastic Properties

Development of high‐strength hydrogels has recently attracted ever‐increasing attention. In this work, a new design strategy has been proposed to prepare graphene oxide (GO)/polyacrylamide (PAM)/aluminum ion (Al³⁺)‐cross‐linked carboxymethyl hemicellulose (Al‐CMH) nanocomposite hydrogels with very tough and elastic properties. GO/PAM/Al‐CMH hydrogels were synthesized by introducing graphene oxide (GO) into PAM/CMH hydrogel, followed by ionic cross‐linking of Al³⁺. The nanocomposite hydrogels were characterized by means of FTIR, X‐ray diffraction (XRD), and scanning electron microscopy/energy‐dispersive X‐ray analysis (SEM‐EDX) along with their swelling and mechanical properties. The maximum compressive strength and the Young's modulus of GO_3.5/PAM/Al‐CMH_0.45 hydrogel achieved values of up to 1.12 and 13.27 MPa, increased by approximately 6488 and 18330 % relative to the PAM hydrogel (0.017 and 0.072 MPa). The as‐prepared GO/PAM/Al‐CMH nanocomposite hydrogels possess high strength and great elasticity giving them potential in bioengineering and drug‐delivery system applications.     

Oligomeric Hydrogels Self‐Assembled from Reduction‐Controlled Condensation

Polymer hydrogels and small‐molecule‐based (SMB) supramolecular hydrogels have been widely explored. But oligomeric hydrogels have remained a challenge because synthetic difficulties of the oligomers and control of their amphiphilicities. Reported herein is the rational design of two precursors Cys(SEt)‐Lys‐CBT ( 1 ) and (Cys‐Lys‐CBT)₂ ( 2 ) (CBT=2‐cyano‐6‐aminobenzothiazole) and the use of a biocompatible condensation to prepare oligomeric hydrogels. Glutathione reduction of 1 or 2 yields the same gelator Cys‐Lys‐CBT ( 3 ) which condenses with each other to yield amphiphilic cyclic oligomers. The oligomers instantly self‐assemble into nanofibers and form oligomeric hydrogels with similar mechanic properties. Chemical analyses indicated that the major condensation product in both two hydrogels is a cyclic dimer. Considering its biocompatibility, optimal mechanical strength, and biodegradability, we believe that our oligomeric hydrogel might be useful for long‐term drug delivery in the future.     

Hemocompatibility of Ca2+‐Crosslinked Nanocellulose Hydrogels: Toward Efficient Management of Hemostasis

The present work investigates Ca²⁺‐crosslinked nanofibrillated cellulose hydrogels as potential hemostatic wound dressings by studying core interactions between the materials and a central component of wounds and wound healing—the blood. Hydrogels of wood‐derived anionic nanofibrillated cellulose (NFC) and NFC hydrogels that incorporate kaolin or collagen are studied in an in vitro whole blood model and with platelet‐free plasma assays. The evaluation of thrombin and factor XIIa formation, platelet reduction, and the release of activated complement system proteins, shows that the NFC hydrogel efficiently triggered blood coagulation, with a rapid onset of clot formation, while displaying basal complement system activation. By using the NFC hydrogel as a carrier of kaolin, the onset of hemostasis is further boosted, while the NFC hydrogel containing collagen exhibits blood activating properties comparable to the anionic NFC hydrogel. The herein studied NFC hydrogels demonstrate great potential for being part of advanced wound healing dressings that can be tuned to target certain wounds (e.g., strongly hemorrhaging ones) or specific phases of the wound healing process for optimal wound management.     

Injectable poloxamer/graphene oxide hydrogels with well‐controlled mechanical and rheological properties

Although significant progress has been made in the design and application of injectable hydrogels for biomedical applications, concurrent control of rheological and mechanical properties of injectable hydrogels has remained as an open challenge to the researchers. In this work, we introduce and put into practice a photo‐curable poloxamer (also known as Pluronic)/graphene oxide (Plu/GO) injectable hydrogel with well‐controlled rheological and mechanical properties. Acrylate group was anchored to hydrogel structure to endow photo‐crosslinking ability through decelerating degradation rate of poloxamer hydrogels after injection. It was found that the modified Plu remains stable in biological media for a long‐term period without significant weight loss. Rheological properties of hydrogels were also carried out as essential prerequisite for an ideal injectability via frequency sweep, flow curve, recovery, and yield stress before and after modification, signifying shear‐thinning behavior of Plu/GO hydrogels with high recoverability. The viscosity of shear‐thinning‐like hydrogels dropped at higher shear stress, which facilitated injection process. Moreover, mechanical behavior of Plu was optimized by manipulating the content of Plu, degree of modification with reactive precursor, curing, and particularly incorporation of GO without deteriorating effects on rheological behavior of Plu.     

Calcium Phosphate‐Reinforced Photosensitizer‐Loaded Polymer Nanoparticles for Photodynamic Therapy

Calcium phosphate‐reinforced photosensitizer‐loaded polymer nanoparticles have been developed for photodynamic therapy. Chlorin e6 (Ce6)‐loaded core–shell–corona polymer micelles of poly(ethylene glycol)‐b‐poly(L ‐aspartic acid)‐b‐poly(L ‐phenylalanine) ( PEG-PAsp-PPhe ) were employed as template nanoparticles for mineralization with calcium phosphate (CaP). CaP deposition was performed by the electrostatic localization of calcium ions at the anionic PAsp middle shells and the subsequent addition of phosphate anions. CaP‐reinforced nanoparticles exhibited enhanced stability. The CaP mineral layer effectively inhibited Ce6 release from the Ce6‐loaded mineralized nanoparticles (Ce6‐NP‐CaP) at physiological pH value. At an acidic endosomal pH value of 5.0, Ce6 release was enhanced, owing to rapid dissolution of the CaP minerals. Upon irradiation of Ce6‐NP‐CaP‐treated MCF‐7 breast‐tumor cells, the cell viability dramatically decreased with increasing irradiation time. The phototoxicity of Ce6‐NP‐CaP was much higher than that of free Ce6. Non‐invasive optical‐imaging results indicated that Ce6‐NP‐CaP exhibited enhanced tumor specificity compared with free Ce6 and Ce6‐loaded non‐mineralized polymer nanoparticles (Ce6‐NP).     

Synthesis of a Bis‐Urea Dimer and Its Effects on the Physical Properties of an Amphiphilic Tris‐Urea Supramolecular Hydrogel

The successful development of stiff supramolecular gels is an important goal toward their practical application. One approach to stiffen supramolecular gels is to introduce covalent cross‐links. The bis‐urea dimer 2 , having a structure similar to that of the low‐molecular‐weight gelator 1 , was synthesized. Supramolecular hydrogels were formed from mixtures of 1 and 2 in appropriate ratios, with 2 acting as a covalent cross‐linker to connect the fibrous aggregates formed by the self‐assembly of 1 . The introduction of these covalent cross‐links greatly influenced the dynamic viscoelasticity of the supramolecular hydrogels. In the supramolecular hydrogel of 1 mixed with 5 % 2 , the storage modulus was 1.35 times higher than that of the supramolecular hydrogel of 1 alone, and the crossover strain was extended from 5 % to over 20 %. The supramolecular hydrogel of 1 and 2 was free‐standing and supported 13 times its own weight.     

Preparation of Biocompatible Graphene Oxide Composite Hydrogel to Deliver Ophthalmic Drugs

Considering that conventional hydrogels showed limited capabilities of controlling hydrophobic drug loading and releasing and graphene materials had interactions with hydrophobic drugs, we designed a graphene oxide (GO) composite hydrogel for drug delivery. But GO could not disperse well in monomer solution and agglomerated badly. Thus, water-soluble GO (GO-tripolymer) was first prepared under the stabilization of amphiphilic polymer, Pluronic F-127. The GO-tripolymer showed good solubility in PBS with the increase of polymer concentration. All GO-tripolymer solutions had the same UV absorption peaks as GO. Then, GO composite hydrogels (HNG hydrogels) were formed by the polymerization of hydroxyethyl methacrylate (HEMA), N-Vinyl pyrrolidone (NVP) and GO-tripolymer mixture. The introduction of GO-tripolymer had little effect on the gelation time and equilibrium swelling ratio of hydrogel. The freeze-drying hydrogel showed porous structure. The pore size decreased and the rough surface was detected with the increase of GO concentration. HNG hydrogel could load more puerarin and norfloxacin than conventional hydrogel (HN hydrogel). Moreover, HNG hydrogel could control puerarin and norfloxacin release more steadily than HN hydrogel. HNG exhibited low cytotoxicity.     

Self‐Assembled Fibers Containing Stable Organic Radical Moieties: Alignment and Magnetic Properties in Liquid Crystals

Macroscopically oriented stable organic radicals have been obtained by using a liquid–crystalline (LC) gel composed of an l ‐isoleucine‐based low molecular weight gelator containing a 2,2,6,6‐tetramethylpiperidine 1‐oxyl moiety. The LC gel has allowed magnetic measurements of the oriented organic radical. The gelator has formed fibrous aggregates in liquid crystals via intermolecular hydrogen bonds. The fibrous aggregates of the radical gelator are formed and oriented on cooling by applying a magnetic field to the mixture of liquid crystals and the gelator. Superconducting quantum interference device (SQUID) measurements have revealed that both oriented and nonoriented fibrous aggregates exhibited antiferromagnetic interactions, in which super‐exchange interaction constant J is estimated as ?0.89 cm^?1.     

Preparation of stable and superior flux GO/LDH/PDA‐based nanofiltration membranes through electrostatic self‐assembly for dye purification

Graphene oxide (GO) has triggered significant attention as a new type of self‐assembly membrane material. However, the low filtration flux and unstable performance of GO membrane limit its practical application. Hence, in this work, layered double hydroxides (LDHs), as a 2D material with double‐layer channel structure and positive electricity, were self‐assembled with GO at weight ratio of 7:3 by electrostatic interaction. Then, the GO/LDH hybrids combined with polydopamine (PDA) to obtain stable and high‐flux GO‐based membranes through vacuum filtration and the structure and morphology of as‐prepared samples were characterized by FT‐IR, XRD, XPS, and SEM. Furthermore, the separation performance and surface electronegativity of membranes were tested via pure water flux, rejection efficiency, recycle experiments, and zeta potential. Results revealed that the stability and flux of composite membrane were enhanced significantly compared with neat GO‐based membrane. Further, the dye rejection rate of methylene blue (MB) is higher than Congo red (CR) and rhodamine B (Rh B) and reached to 99.8%.     

Self‐Assembled Peptide‐Based Hydrogels as Scaffolds for Proliferation and Multi‐Differentiation of Mesenchymal Stem Cells

Fluorenyl‐9‐methoxycarbonyl (Fmoc)‐diphenylalanine (Fmoc‐FF) and Fmoc‐arginine‐glycine‐­aspartate (Fmoc‐RGD) peptides self‐assemble to form a 3D network of supramolecular hydrogel (Fmoc‐FF/Fmoc‐RGD), which provides a nanofibrous network that uniquely presents bioactive ligands at the fiber surface for cell attachment. In the present study, mesenchymal stem cells (MSCs) in Fmoc‐FF/Fmoc‐RGD hydrogel increase in proliferation and survival compared to those in Fmoc‐FF/Fmoc‐RGE hydrogel. Moreover, MSCs encapsulated in Fmoc‐FF/Fmoc‐RGD hydrogel and induced in each defined induction medium undergo in vitro osteogenic, adipogenic, and chondrogenic differentiation. For in vivo differentiation, MSCs encapsulated in hydrogel are induced in each defined medium for one week, followed by injection into gelatin sponges and transplantation into immunodeficient mice for four weeks. MSCs in Fmoc‐FF/Fmoc‐RGD hydrogel increase in differentiation into osteogenic, adipogenic, and chondrogenic differentiation, compared to those in Fmoc‐FF/Fmoc‐RGE hydrogel. This study concludes that nanofibers formed by the self‐assembly of Fmoc‐FF and Fmoc‐RGD are suitable for the attachment, proliferation, and multi‐differentiation of MSCs, and can be applied in musculoskeletal tissue engineering.

     

Tunable,Functional Diblock Copolypeptide Hydrogels Based on Methionine Homologs

The preparation of new diblock copolypeptide hydrogels derived from homologs of l ‐methionine, that is, l ‐homomethionine and l ‐6‐(methylthio)‐l ‐norleucine is described. Compared to l ‐methionine residues, use of l ‐methionine homologs allow improved copolymerization with l ‐leucine residues to give well‐defined block copolypeptides. These copolypeptides are subsequently modified using robust thioether alkylation reactions employing a variety of functional epoxides, which yield samples capable of forming transparent, self‐healing hydrogels in water. The facile variation of different functional epoxides for postpolymerization modification is found to allow predictable functionalization and tuning of hydrogel properties by the modification of simple precursors.     

Characterization and Mechanism Elucidation of Dye Adsorption Using Cuprous Selenide Nanoparticles from Aqueous Solutions

The removal of cationic dyes, methylene blue(MB) and rhodamine B(RB), and anionic dyes, methyl or-ange(MO) and eosin Y(EY), from aqueous solutions by adsorption using Cu₂Se nanoparticles(Cu₂SeNPs) was studied. The effects of the initial pH values, adsorbent doses, contact time, initial dye concentrations, salt concentrations, and operation temperatures on the adsorption capacities were investigated. The adsorption process was better fitted the Langmuir equation and pseudo-second-order kinetic model, and was spontaneous and endothermic as well. The adsorption mechanism was probably based on the electrostatic interactions and π-π interactions between Cu₂SeNPs and dyes. For an adsorbent of 0.4 g/L of Cu₂SeNPs, the adsorption capacities of 23.1(MB), 22.9(RB) and 23.9(EY) mg/g were achieved, respectively, with an initial dye concentration of 10 mg/g(pH=8 for MB and pH=4 for RB and EY) and a contact time of 120 min. The removal rate of MB was still 70.4% for Cu₂SeNPs being reused in the 5th cycle. Furthermore, the recycled Cu₂SeNPs produced from selenium nanoparticles adsorbing copper were also an effective adsorbent for the removal of dyes. Cu₂SeNPs showed great potential as a new adsorbent for dyes removal due to its good stability, functionalization and reusability.     

Reinforcement of Self‐Healing Polyacrylic Acid Hydrogel with Acrylamide Modified Microcrystalline Cellulose†

Self‐healing hydrogel such as polyacrylic acid (PAA) hydrogel has attracted increasing attention based on its promising potential applications. However, it usually suffers from low strength especially as mechanical device. Herein, a commercial microcrystalline cellulose (MCC) was modified with acrylamide to graft polyacrylamide (PAM) chains on the particle surface. The acrylamide‐modified MCC (AM‐MCC) was then dispersed in monomer solution of acrylic acid to prepare composite hydrogel. The mechanical properties of the obtained composite hydrogels and the self‐healed hydrogels were carefully measured by compressive and tensile tests, and by dynamic mechanical analysis. Our results demonstrate that introduction of a small amount of AM‐MCC such as 3 wt% can not only reinforce the original hydrogel and the healed hydrogel markedly, but also improve self‐healing efficiency obviously. The analyses indicate that in addition to the reversible multi‐interactions such as hydrogen bonding and ionic interactions, the entanglements between the PAA chains of the hydrogel matrix and the PAM chains grafted on the MCC particles have also played an important role on the improvement in mechanical performances and the healing ability of the hydrogel. Moreover, the responsiveness to exterior ion has been tested to indicate potential application of the composite hydrogel as self‐healable sensor.     

Rational Design of Heat‐Set and Specific‐Ion‐Responsive Supramolecular Hydrogels Based on the Hofmeister Effect

Smart supramolecular hydrogels have been prepared from a bolaamphiphilic L ‐valine derivative in aqueous solutions of different salts. The hydrogels respond selectively to different ions and are either reinforced or weakened. In one case, in contrast to conventional systems, the hydrogels are formed upon heating of the system. The use of the hydrogels in the controlled release of an entrapped dye is described as a proof of the potential applications of these systems. The responsive hydrogels were rationally designed by taking into account the noticeable effect of different ions from the Hofmeister series in the solubility of the hydrogelator, which was assessed by using NMR experiments. On the one hand, kosmotropic anions such as sulfate produce a remarkable solubility decrease in the gelator, which is associated with gel reinforcement, as measured by rheological experiments. On the other hand, chaotropic species such as perchlorate weaken the gel. A dramatic effect was observed in the presence of guanidinium chloride, which boosted the solubility of the gelator, in accordance with its chaotropic behaviour reported in protein science. In this case, a direct interaction of the guanidinium species with the carbonyl groups of the hydrogelator is detected by ¹³C NMR spectroscopy. The weakening of this interaction upon a temperature increase allows for the preparation of heat‐set hydrogelating systems.     

Optically Transparent Hydrogels from an Auxin–Amino‐Acid Conjugate Super Hydrogelator and its Interactions with an Entrapped Dye

Low‐molecular‐weight organic hydrogelators (LMHGs) that can rigidify water into soft materials are desirable in various applications. Herein, we report the excellent hydrogelating properties of a simple synthetic auxin–amino‐acid conjugate, naphthalene‐1‐acetamide of L ‐phenylalanine ( 1‐NapF , M_w=333.38 Da), which gelated water even at 0.025 wt %, thereby making it the most‐efficient LMHG known. Optically transparent gels that exhibited negligible scattering in the range 350–900 nm were obtained. A large shift from the theoretical pK_a value of the gelator was observed. The dependence of the minimum gelator concentration (MGC) and the gel‐melting temperatures on the pH value indicated the importance of H‐bonding between the carboxylate groups on adjacent phenylalanine molecules in the gelator assembly. FTIR spectroscopy of the xerogels showed a β‐sheet‐like assembly of the gelator. Variable‐temperature ¹H NMR spectroscopy demonstrated that π stacking of the aromatic residues was also partly involved in the gelator assembly. TEM of the xerogel showed the presence of a dense network of thin, high‐aspect‐ratio fibrillar assemblies with diameters of about 5 nm and lengths that exceeded a few microns. Rheology studies showed the formation of stable gels. The entrapment of water‐soluble dyes afforded extremely fluorescent gels that involved the formation of J‐aggregates by the dye within gel. A strong induced‐CD band established that the RhoB molecules were interacting closely with the chiral gelator aggregates. H‐bonding and electrostatic interactions, rather than intercalation, seemed to be involved in RhoB binding. The addition of chaotropic reagents, as well as increasing the pH value, disassembled the gel and promoted the release of the entrapped dye with zero‐order kinetics.