Adsorption of metal anions of vanadium(V) and chromium(VI) on Zr(IV)-impregnated collagen fiber

The metal anions of vanadium (V) and chromium (VI) in aqueous solution can be effectively adsorbed by Zr(IV)-impregnated collagen fiber (ZrICF). The maximum adsorption capacity of V(V) takes place within the pH range of 5.0 to 8.0, while that of Cr(VI) is within the pH range of 6.0 to 9.0. When the initial concentration of metal ions was 2.00 mmol L⁻¹ and the temperature was 303 K, the adsorption capacity of V(V) on Zr-ICF was 1.92 mmol g⁻¹ at pH 5.0, and the adsorption capacity of Cr(VI) was 0.53 mmol g⁻¹ at pH 7.0. As temperature increased, the adsorption capacity of V(V) increased, while that of Cr(VI) was almost unchanged. The adsorption isotherms of the anionic species of V(V) and Cr(VI) can be fit by the Langmuir equation. The adsorption rate of V(V) follows the pseudo-first-order rate model, while the adsorption rate of Cr(VI) follows the pseudo-second-order rate model. Furthermore, ZrICF shows high adsorption selectivity to V(V) in the mixture solution of V(V) and Cr(VI). Practical applications of ZrICF could be expected in consideration of its performance in adsorption of V(V) and Cr(VI).     

Biosorption of chromium(VI) and arsenic(V) onto methylated yeast biomass

Yeast biomass was methylated in a 0.1 M HCl methyl alcohol solution at room temperature and the methylated yeast (MeYE) was applied to the adsorptive separation of Cr(VI) and As(V) anions from aqueous solutions. At near-neutral pH, while Cr(VI) and As(V) anions were scarcely adsorbed onto unmethylated yeast biomass, the amounts adsorbed increased with increasing methylation degree. The amount of Cr(VI) adsorbed onto MeYE was almost constant at pH 4-6 and decreased with increasing pH above pH 6. The amount of As(V) adsorbed onto MeYE was rather lower than that of Cr(VI) and it had a peak at about pH 7. A metal-binding model was used to describe the adsorption characteristics of Cr(VI) and As(V) on MeYE. The results showed that MeYE has two different types of adsorption sites. The saturated amount of Cr(VI) and As(V) adsorbed onto MeYE having methylation degree 0.94 was 0.55 mmol g(-1).     

Electrometric titrations of Cr(VI), Mn(IV), V(V), Co(III) and U(VI) with a standard iron(II) solution in alkaline media containing hexitols

Direct and indirect potentiometric, bipotentiometric and biamperometric titrations with a standard iron(II) solution are described for some inorganic compounds in alkaline media containing hexitols (mannitol, dulcitol and sorbitol). The optimal conditions for titrations based on the Cr(VI) → Cr(III), Mn(IV) → Mn(III) → Mn(II), V(V) → V(IV), Co(III) → Co(II) and U(VI) → U(IV) systems are discussed. Of the hexitols studied, sorbitol has the greatest effect on the value of the redox potential of the Fe(III)/Fe(II) system; the E_f° value is about —1.10 V vs. SCE.     

Consecutive thin-layer chromatographic separation of Zr(IV), Hf(IV) and many other ions on silica gel in nitric acid-hydrogen peroxide media

The thin-layer chromatographic (TLC) behaviour of 64 ions including Zr(IV) and Hf(IV) has been surveyed on systems composed of silica gel and of nitric acid and nitric acid-hydrogen peroxide media. In the 0.5 mol 1(-1) HNO(3)-3% (w/v) H(2)O(2) solution, only Hf(IV) adsorbed very strongly, whereas Zr(IV) and many other ions showed no or weak adsorption. Stepwise development with diluted nitric acid and subsequently with nitric acid-hydrogen peroxide solution allowed the consecutive separation of three-component mixtures consisting of Zr(IV), Hf(IV) and one of many other accompanying elements, such as Mo(VI), Nb(V), Th(IV), Ti(IV), U(VI) and rare earths(III), to be conducted simply and effectively.     

Adsorptive stripping voltammetry determination of molybdenum(VI) in water and soil

A differential pulse stripping voltammetry method for the trace determination of molybdenum(VI) in water and soil has been developed. In 0.048M oxalic acid and 6 x 10(-5)M Toluidine Blue (pH 1.8) solution, Mo(V), the reduction product of Mo(VI) in the sample solution, can form a ternary complex, which can be concentrated by adsorption on a static mercury drop electrode at -0.1 V (vs. Ag/AgCl). The adsorbed complex gives a well-defined cathodic stripping current peak at -0.30 V, which can be used for determining Mo(VI) in the range 5 x 10(-10)-7 x 10(-9)M, with a detection limit of 1 x 10(-10)M (4 min accumulation). The method is also selective. Most of the common ions do not interfere but Sn(IV) and large amounts of Cu(2+), Ag(+) and Au(3+) affect the determination.     

Separation of the Oxyanions of Re(VII), Mo(VI), Cr(VI), W(VI), and V(V) from a Multicomponent Solution at pH 6 by foam Fractionation

Abstract

An experimental investigation is presented of the foam separation of the oxyanions of Re(VII), Mo(VI), Cr(VI), W(VI), and V(V). The pH 6.0, multicomponent aqueous solutions are 1.0 × 10 ^?6 M in each metal. The effect of chloride competition with the metal oxyanions for the cationic surfactant is determined with NaCl concentrations up to 0.3 M. With proper NaCl concentration adjustments, V(V) can be separated completely from the other four metals, and Re(VII) and Mo(VI) from the other three. Pulsed surfactant dosage is investigated for 1.0 × 10 ^?6 M Mo(VI) solutions at pH 6.0 and 3.1.     

Differential pulse polarography of germanium(IV), tin(IV), arsenic(V), antimony(V), selenium(IV) and tellurium(VI) at the static mercury drop electrode in catechol—perchlorate media

The differential pulse polarography of Ge(IV), Sn(IV), As(V), Sb(V), Se(IV) and Te(VI) has been investigated in perchlorate media containing catechol using a static mercury drop electrode. Under optimum conditions, Ge(IV), Sn(IV), As(V), and Sb(V) undergo reduction to yield well-defined peaks; detection limits of 82 ppb, 28 ppb, 4 ppm, and 25 ppb, respectively, have been calculated. Few electrolytes are known for which these ions exhibit a quantitatively useful polarographic response. While Se(IV) and Te(VI) may be detected at levels of 115 ppb and 17 ppb, respectively, addition of catechol does not enhance the peak current relative to that observed in simple perchlorate solutions, as was the case for the other ions studied. The determination of germanium, arsenic and antimony in samples is described.     

Chelating behavior of macroreticular hydroxamic acid resin towards molybdenum(VI), tungsten(VI), uranium(VI) and vanadium(V)

Summary The properties and behaviour of the hydroxamic acid resin have been studied and shown to be an highly selective resin for molybdenum(VI), tungsten(VI), uranium(VI) and vanadium(V) ions. The stability constants of these metal ion complexes with the resin have been determined. The sorption and desorption characteristics of these metal ions on this resin and the methods for the separation of these metal ions from each other on a short column of such resin were also developed.

---

Komplexierungsverhalten von makroretikularem Hydroxamsäureharz gegenüber Molybdän(VI), Wolfram(VI), Uran(VI) und Vanadium(V)

Zusammenfassung Die Eigenschaften und das Verhalten von Hydroxamsäureharz wurden untersucht. Das Harz erwies sich als hochselektiv für Mo(VI), W(VI), U(VI) und V(V). Die Stabilitätskonstanten der Komplexe wurden bestimmt, die Sorptions- und Desorptionscharakteristica wurden untersucht und Trennungsmethoden für die genannten Ionen an einer kurzen Säule entwickelt.

     

Micro-determination of As(V), V(V), Mo(VI), W(VI) in the presence of Cu(II), Ni(II) and Zn(II)

A rapid procedure is described for the separation and determination of 0.025 mg to 1.0 mg quantities of As(V), V(V), Mo(VI) and W(VI) from small quantities of Cu(II), Ni(II), and Zn(II) using silica gel as the selective sorbent for the cations. The individual anionic components, which remain in the supernatant solution after separation from the cations, are determined by colorimetric methods. The complete recovery of As(V) in supernatant solution has also been tested radiometrically using⁷⁶As as the radioactive indicator. The sorbed cations after extraction with dilute hydrochloric acid are determined by EDTA titrations.     

Bicyclic and acyclic diamides: comparison of their aqueous phase binding constants with Nd(III), Am(III), Pu(IV), Np(V), Pu(VI), and U(VI)

This report describes affinity measurements for two, water-soluble, methyl-alkylated diamides incorporating the malonamide functionality, N,N,N',N' tetramethylmalonamide (TMMA) and a bicyclic diamide (1a), toward actinide metal cations (An) in acidic nitrate solutions. Ligand complexation to actinides possessing oxidation states ranging from +3 to +6 was monitored through optical absorbance spectroscopy, and formation constants were obtained from the refinement of the spectrophotometric titration data sets. Species analysis gives evidence for the formation of 1, 4, 1, and 2 spectrophotometrically observable complexes by TMMA to An(III, IV, V, and VI), respectively, while for 1a, the respective numbers are 3, 4, 2, and 2. Consistent with the preorganization of 1a toward actinide binding, a significant difference is found in the magnitudes of their respective formation constants at each complexation step. It has been found that the binding affinity for TMMA follows the well-established order An(V) < An(III) < An(VI) < An(IV). However, with 1a, Np(V) forms stronger complexes than Am(III). The complexation of 1a with Np(V) and Pu(VI) at an acidity of 1.0 M is followed by reduction to Np(IV) and Pu(IV), whereas TMMA does not perturb the initial oxidation state for these dioxocations. These measurements of diamide binding affinity mark the first time single-component optical absorbance spectra have been reported for a span of actinide-diamide complexes covering all common oxidation states in aqueous solution.     

The adsorption behaviour of99Mo(VI),238U(VI),95Zr(IV) and95Nb(V) on alumina

The distribution of Mo(VI) and the interfering radiocontaminants U(VI), Zr(IV) and Nb(V) have been investigated between chromatographic alumina and aqueous hydrochloric acid solutions of concentrations ranging from 0.5M to 11M. At low acidities (less than 1M HCl) the distribution coefficients increase with the decrease of acid concentration, while in the region of 2–4M they increase with the increase of the acid concentration. Above 4M HCl, the increase inK _D continues with the acid concentration for both Zr(IV) and Nb(V), but constant values are reached for U(VI) and Mo(VI).     

Adsorption behaviors of high-valence metal ions on desferrioxamine B immobilization nylon 6,6 chelate fiber under highly acidic conditions

Adsorption behaviors of the high-valence metal ions Zr(IV), Hf(IV), Ti(IV), V(V), Nb(V), Ta(V), and Mo(IV) on desferrioxamine B (DFB) immobilization nylon 6,6 chelate fiber was investigated under highly acidic conditions. Though the complexes of DFB and the high-valence metal ions were extracted without selectivity by solvent extraction, the only zirconium ions showed higher adsorption percentages than that of other high-valence metal ions on the DFB immobilization nylon 6,6 chelate fiber. Adsorption properties were caused that limited the freedom of DFB by chemical immobilization. Especially, hafnium ions and zirconium ions, which have similar chemical properties, showed different adsorption behavior in highly acidic aqueous solutions. Zirconium ions were quantitatively adsorbed up to 13.5 micromol/g.     

Alpha-benzoinomixe: Extracting agent for uranium(VI), tungsten(VI), molybdenum(VI) and some transition metals of the iron family

The effect of pH on the percent extraction of vanadium(V), iron(II), cobalt(II), nickel(II), copper(II), molybdenum(VI), tungsten(VI) and uranium(VI) by -benzoinoxime in different solvents has been studied. The maximum recovery is not appreciably affected by the nature of the solvent, but occurs at different pH values for different metals. The pH corresponding to maximum extraction increases with increasing hydrolysis pK of the species in aqueous solution, and decreases with increasing stability constant of the complexes formed. Alpha-benzoinoxime allows the separation of these metal ions into three groups: V(V), Mo(VI) and W(VI) are extracted at pH=2, U(VI) at pH=5, Fe(II), Cu(II), Co(II) and Ni(II) at around pH=10.     

Granulation of Nickel–Aluminum–Zirconium Complex Hydroxide Using Colloidal Silica for Adsorption of Chromium(VI) Ions from the Liquid Phase

We combined a nickel–aluminum–zirconium complex hydroxide (NAZ) with colloidal silica as a binder to prepare a granulated agent for adsorbing heavy metals from aqueous media. Three samples with different particle diameters were prepared to evaluate the effects on the properties: small (NAZ-S), medium (NAZ-M), and large (NAZ-L). We confirmed the granulation of the prepared samples at a binder content of 25%. NAZ-S had the largest specific surface area and number of hydroxyl groups, followed by NAZ-M and then NAZ-L. Regarding the adsorption capacity, NAZ-S adsorbed the most chromium(VI) ions followed by NAZ-M and then NAZ-L. The binding energy of Cr(2p) at 575–577 eV was detected after adsorption, and the effects of the temperature, contact time, and pH on the adsorption of chromium(VI) ions were evaluated. We identified the following adsorption mechanism: ion exchange with sulfate ions in the interlayer region of the NAZ samples. Finally, the chromium(VI) ions adsorbed by the NAZ samples were easily desorbed using a desorption solution. The results showed that NAZ offers great potential for the removal of chromium(VI) ions from aqueous solutions.     

Fatty amides synthesized from vegetable oil as extractant of molybdenum(VI)

In this study, fatty amides (FAs) synthesized from palm olein were used to extract and separate Mo(VI) from acidic media. Effects of various parameters upon the separation of Mo(VI) from Co(II), Ni(II), Al(III) and Mn(II), including extractant concentration, metal ion concentration, contact time, diluent, and acidity, were investigated. It was found that Mo(VI) was successfully separated from the above commonly associated metal ions by stripping from the loaded organic phase. Different acidic and alkaline solutions were used. Ammonium hydroxide solution was an optimal. Extraction of Mo(VI) into the organic phase involved the formation of 1:3 complexes. This work presents the development of a low-cost and environmentally friendly extractant to recycle and recover molybdenum.     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Acridone — A new reagent for the detection of cerium(IV), chromium(VI), and vanadium(V) in binary or ternary mixtures

Summary A new scheme for the detection of Ce(IV), Cr(VI) and V(V) in binary or ternary mixtures is reported. The procedure is based on the reaction of these species with acridone to give a rose-red oxidation product, combined with methods of selective reduction of Ce(IV) and Cr(VI) in the mixtures. The method is free from a number of interferences that are encountered in the diphenylcarbazide, diphenylamine and benzidine tests and does not require prior separation of the constituents.

---

Zusammenfassung Ein neues Nachweis-Schema für Ce(IV), Cr(VI) und V(V) in binären oder ternären Gemischen wurde beschrieben. Es beruht auf der Reaktion dieser Elemente mit Acridon, wobei ein rosarotes Oxydationsprodukt entsteht, in Kombination mit der selektiven Reduktion von Ce(IV) und Cr(VI) in diesen Mischungen. Die angegebene Arbeitsweise ist frei von einigen Störungen der Nachweise mit Diphenylcarbazid, Diphenylamin bzw. Benzidin und erfordert nicht die vorhergehende Trennung der einzelnen Bestandteile der erwähnten Gemische.

     

Spectrophotometric study and extraction of niobium(V) complexes with catechol and its derivatives as ion-pairs with quaternary ammonium ions: Application to the separation of niobium from other refractory metal ions

The reactions of niobium(V) with catechol and several substituted derivatives were studied. Optimal conditions for colour development in the niobium(V)-catechol system are: pH 6.7–8.0, and heating at 85° for at least 6 min; the wavelength of maximal absorption is 365 nm, and the molar absorptivity is 1.02·10⁴. Catechol derivatives require lower temperatures and develop colours with niobium(V) in neutral or slightly acidic solutions. The best of the derivatives studied were 3-methyl-catechol and 4-chlorocatechol. Extraction of the ion-pairs formed between niobium-(V)-catechol and different quaternary ammonium ions, was studied with representative solvents. Similar studies were made on other refractory metal ions, i.e., Ti(IV), V(V), Mo(VI) and W(VI), under the optimal conditions for the reaction with niobium(V). Separations of binary (1:1) mixtures of niobium(V) with Ti(IV), V(V), Mo(VI) or W(VI) at the 5·10^-5M level were shown to be possible under the predicted conditions.     

Separation and spectrophotometric determination of very low levels of Cr(VI) in water samples by novel pyridine-functionalized mesoporous silica

A modified SBA-15 mesoporous silica was developed, as an adsorbent, for the removal of Cr(VI) ions from natural-water samples. The effects of experimental parameters, including pH of solution, sample and eluent flow rate, the eluent composition, the eluent volume, and the effect of coexisting ions on the separation and determination of Cr(VI), were investigated. It was shown that Cr(VI) was selectively adsorbed from aqueous solution at pH 3, but Cr(III) could be adsorbed from solution at alkaline pH range. The retained Cr(VI) was eluted with 0.5?mol?L^?1 KCl solution in 0.1?mol?L^?1 Na₂CO₃ subsequently. Under the optimum conditions, the modified mesoporous silica (py-SBA-15) with a high pore diameter exhibited an adsorption capacity of 136?mg?g^?1 and a lower limit of detection than 2.3?µg?L^?1 by using diphenylcarbazide as a chromophorous reagent for the determination of Cr(VI) ions. A preconcentration factor as high as 200 was calculated for Cr(VI). The loaded py-SBA-15 can be reactivated with recovery of more than 98.5% over at least eight cycles. The relative standard deviation (RSD) for Cr(VI) ion recovery was less than 1.8%. Validation of the outlined method was performed by analysing a certified reference material (BCR 544). The proposed method was applied to determine Cr(VI) value in natural and waste water samples successfully.