The Non‐Isothermal Decomposition Kinetics of NaNTO·H2O and the Relationship between its Structure and Properties

NaNTO·H₂O was prepared by mixing 3‐nitro‐1,2,4‐triazol‐5‐one (NTO) aqueous solution and sodium hydroxide aqueous solution. Its thermal decomposition and kinetics were studied under non‐isothermal conditions by DSC and TG/DTG methods. The kinetic parameters were obtained from analysis of the DSC and TG/DTG curves by the Kissinger method, the Ozawa method, the differential method and the integral method. The most probable mechanism function for the thermal decomposition of the first stage was suggested by comparing the kinetic parameters. The critical temperature of thermal explosion (T_b) was 240.93 °C. The theoretical investigation on the structure unit of the title compound was carried out by DFT‐B3LYP/CEP‐31G methods; atomic net charges and the population analysis were discussed.     

Studies on multistep thermal decomposition behavior of polytriazole polyethylene oxide‐tetrahydrofuran elastomer

Polytriazole polyethylene oxide‐tetrahydrofuran (PTPET) is an energetic propellant elastomer that is prepared using glycidyl azide polymer and trifunctional alkynyl‐terminated polyethylene oxide‐tetrahydrofuran. Its thermal decomposition, determined using thermogravimetic analysis, showed two mass‐loss peaks largely related to the decomposition of azide groups and the main chain. Flynn‐Wall‐Ozawa and Kissinger‐Akahira‐Sunose methods were deployed to obtain kinetic triplet parameters of PTPET thermal decomposition by the traditional model‐free method; the Coats‐Redfern approach was used as the model‐fitting method. Kinetics analysis indicated that the mechanism of the two‐step reactions were the primary‐reaction of first order and the power‐law phase reaction of the 2/3 order. The first decomposition stage of PTPET had an activation energy (E_a) of 113 to 116 kJ/mol while the second was 196 to 210 kJ/mol. The thermal decomposition of PTPET with different heating rates and mechanisms showed good kinetic compensation effects, the gas products being further studied with TG‐FTIR.     

Modeling liquid thermal explosion reactor containing <Emphasis Type="Italic">tert</Emphasis>-butyl peroxybenzoate

This study investigated the role played by green thermal analysis technology in promoting the use of resources, preventing pollution, reducing energy consumption and protecting the environment. The chemical tert-butyl peroxybenzoate (TBPB) has been widely employed in the petrifaction industries as an initiator of polymerization formation agent. This study established the thermokinetic parameters and thermal explosion hazard for a reactor containing TBPB via differential scanning calorimetry (DSC). To simulate thermokinetic parameters, a 5-ton barrel reactor of liquid thermal explosion model was created in this study. The approach was to develop a precise and effective procedure on thermal decomposition, runaway, and thermal hazard properties, such as activation energy (E _a), control temperature (CT), critical temperature (TCR), emergency temperature (ET), heat of decomposition (∆H _d), self-accelerating decomposition temperature (SADT), time to conversion limit (TCL), total energy release (TER), time to maximum rate under isothermal condition (TMR _iso), etc. for a reactor containing TBPB. Experimental results established the features of thermal decomposition and huge size explosion hazard of TBPB that could be executed as a reduction of energy potential and storage conditions in view of loss prevention.     

Non-isothermal kinetics of the thermal decomposition of sodium oxalate Na<Subscript>2</Subscript>C<Subscript>2</Subscript>O<Subscript>4</Subscript>

The thermal transformation of Na₂C₂O₄ was studied in N₂ atmosphere using thermo gravimetric (TG) analysis and differential thermal analysis (DTA). Na₂C₂O₄ and its decomposed product were characterized using a scanning electron microscope (SEM) and the X-ray diffraction technique (XRD). The non-isothermal kinetic of the decomposition was studied by the mean of Ozawa and Kissinger–Akahira–Sunose (KAS) methods. The activation energies (E _α) of Na₂C₂O₄ decomposition were found to be consistent. Decreasing E _α at increased decomposition temperature indicated the multi-step nature of the process. The possible conversion function estimated through the Liqing–Donghua method was ‘cylindrical symmetry (R₂ or F_1/2)’ of the phase boundary mechanism. Thermodynamic functions (ΔH*, ΔG* and ΔS*), calculated by the Activated complex theory and kinetic parameters, indicated that the decomposition step is a high energy pathway and revealed a very hard mechanism.     

预氧化聚铝碳硅烷纤维的热分解动力学及其机理

利用热重分析仪(TGA)对预氧化聚铝碳硅烷(PACS)纤维进行了热动力学研究, 用改良的Coats-Redfern法计算了动力学参数, 用Doyle法计算了理论失重值, 并根据FT-IR, XRD和SEM对其热分解的机理进行了分析. 结果表明, 在热分解反应的主要阶段, 预氧化纤维的反应活化能低于PACS纤维, 氧的引入有利于纤维的热分解; 快速升温有利于预氧化PACS纤维的热分解. 在初始分解阶段, 主要为低分子量的PACS和H₂O的逸出, 同时≡Si—H键之间以及≡Si—H与≡Si—CH₃键发生了脱氢、脱CH₄反应, 从而导致交联程度的增加; 随热分解温度进一步的提高, 分子的有机侧基急剧热解, 分解产物从有机物转变为存在部分微晶的无机结构; 热分解温度继续提高, 纤维结构进一步完善, 1300 ℃左右, β-SiC晶粒大小约为2～4 nm左右, 纤维具有较好的性能.     

Mechanical properties of polypropylene (PP) + high‐density polyethylene (HDPE) binary blends: Non‐isothermal degradation kinetics of PP + HDPE (80/20) Blends

In this study, the mechanical properties and non‐isothermal degradation kinetics of polypropylene (PP), high‐density polyethylene (HDPE) with dilauroyl peroxide and their blends in different mixture ratios were investigated. The effects of adding dilauroyl peroxide (0–0.20 wt%) on the mechanical and thermal properties of PP + HDPE blends have been studied. On the other hand, the kinetics of the thermal degradation and thermal oxidative degradation of PP + HDPE (80/20 wt%) blends were studied in different atmospheres, to analyze their thermal stability. The kinetic and thermodynamic parameters such as the activation energy, E_a, the pre‐exponential factor, A, the reaction order, n, the entropy change, the enthalpy change, and the free energies of activated complex related to PP, HDPE, and blend systems were calculated by means of the several methods on the basis of the single heating rate. A computer program was developed for automatically processing the data to estimate the reaction parameters by using different models. Most appropriate method was determined for each decomposition step according to the least‐squares linear regression. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and thermal decomposition kinetics of the complexes [Sm(o‐NBA)3bipy]2·2H2O and [Sm(o‐BrBA)3bipy]2· 2H2O

Two new complexes [Sm(o‐NBA)₃bipy]₂·2H₂O ( 1 ) and [Sm(o‐BrBA)₃bipy]₂·2H₂O ( 2 ) (where o‐NBA is o‐nitrobenzoic acid, o‐BrBA is o‐bromobenzoic acid, and bipy is 2,2′‐bipyridine) were prepared and characterized by elemental analysis, IR, UV, and molar conductance, respectively. The thermal decomposition behaviors of the two complexes were investigated by means of TG–DTG and IR techniques. The thermal decomposition kinetics was studied by using advanced double equal‐double steps method, nonlinear integral isoconversional method, and nonlinear differential isoconversional method. The kinetic parameters of the second‐step process for the two complexes were obtained, respectively. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 607–616, 2008     

Evaluation of runaway thermal reactions of di-<Emphasis Type="Italic">tert</Emphasis>-butyl peroxide employing calorimetric approaches

Di-tert-butyl peroxide (DTBP) is an organic peroxide (OP) which has widespread use in the various chemical industries. In the past, thermal runaway reactions of OPs have been caused by their general thermal instability or by reactive incompatibility in storage or operation, which can create potential for thermal decomposition reaction. In this study, differential scanning calorimetry was applied to measure the heat of decomposition reactions, which can contribute to understand the reaction characteristics of DTBP. Vent sizing package 2 was also employed to evaluate rates of increase for temperature and pressure in decomposition reactions, and then the thermokinetic parameters of DTBP were estimated. Finally, hazard characteristics of the gassy system containing DTBP, specifically with respect to thermal criticality, were clearly identified.     

Kinetics of thermal decomposition of CeO2 nanocrystalline precursor prepared by precipitation method

The thermal decomposition of CeO₂ nanocrystalline precursor prepared by chemical precipitation method was investigated using thermo-gravimetric/differential scanning calorimetry (TG/DSC) and X-ray powder diffraction (XRD). In particular, the differential thermal analysis curves for the decomposition of CeO₂ nanocrystalline precursor were measured at different heating rates in air by a thermal analyzer (NETZSCH STA 449C, Germany). The kinetic parameters of the thermal decomposition of CeO₂ nanocrystalline precursor were calculated using the Kissinger method and the Coats-Redfern method. Results show that the apparent active energy E of the reaction is 105.51 kJ/mol, the frequency factor lnA is 3.602 and the reaction order n is 2. This thermal decomposition process can be described by the anti-Jander equation and a three-dimensional diffusion mechanism. Tanslated from Journal of Central South University (Science and Technology), 2007, 38(3): 428–432 [译自: 中南大学学报(自然科学版]     

Thermal analysis of two series <Emphasis Type="Italic">mono</Emphasis>- and <Emphasis Type="Italic">di</Emphasis>-azocalix[4]arene derivatives

In the present study, thermal decomposition of mono- and di-azocalix[4]arene derivatives (A1–A8 and B1–B8) was investigated by means of thermogravimetry (TG), differential thermal analysis (DTA) and derivative thermogravimetry (DTG). The exclusion of methanol, hydrolysis of benzoyl ester and methyl ketone groups in lower rim, and decomposition of azo groups in upper rim have occurred during thermal analysis, consecutively. The thermal decomposition degrees amount of volatile pyrolysis products were determined in air atmosphere using TG, DTA and DTG curves. In conclusion, the thermal analyses of azocalix[4]arenes demonstrated that its stability depends on the substituted groups and their positions in the calix[4]arene structure.     

Thermolytic investigations on nickel(II) complexes of 4‐N‐(4′‐antipyrylmethylidene)aminoantipyrine with various counterions

Phenomenological characteristics and kinetic and mechanistic aspects of the thermal decomposition of nitrate, chloride, bromide, and iodide complexes of nickel(II) with 4‐N‐(4′‐antipyrylmethylidene)aminoantipyrine have been studied using thermogravimetric (TG) and differential thermogravimetric (DTG) techniques. Kinetic parameters such as activation energy, preexponential factor, and entropy of activation were quantified. The rate‐controlling process in all stages of decomposition was found to be based on random nucleation with one nucleus on each particle according to the Mampel model. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 39: 53–58, 2007     

Kinetics and dissociation mechanism of heptaaqua-<Emphasis Type="Italic">p</Emphasis>-nitrophenolatostrontium(II) nitrophenol

A single crystal of heptaaqua-p-nitrophenolatostrontium(II) nitrophenol (HNSN) was grown, and the structure was confirmed by UV–Vis–NIR, FT-IR, FT-NMR, and high-resolution X-ray diffraction (HRXRD) analyses. The dielectric loss, dielectric constant, and the mechanical strength of the crystal have already been reported. The dynamic, non-isothermal thermal analysis was carried out at different heating rates, and TG and DTG data were used for the interpretation of the mechanisms and kinetics of decomposition by means of a model fitting method, Coats–Redfern equation, and a model-free method, Kissinger and Flynn–Wall method. The values of activation energy (E) and the pre-exponential factor (ln A) of each stage of thermal decomposition at various linear heating rates were calculated.     

N,N′-二(5,5-二甲基-2-磷杂-2-硫代-1,3-二噁烷-2-基)乙二胺在空气中的热分解动力学研究

以TG-DTG为手段, 研究了N,N′-二(5,5-二甲基-2-磷杂-2-硫代-1,3-二噁烷-2-基)乙二胺(DPTDEDA)在空气中的热分解动力学,利用Friedman法、Flynn-Wall-Ozawa(FWO)法对DPTDEDA进行了动力学分析, 求出了该物质两个主要的热分解阶段的热分解动力学参数, 同时利用Coats-Redfern法、Achar法研究了该物质的热分解机理. 结果表明, 用Friedman法所求得的两个热分解阶段的表观活化能的平均值分别为128.03和92.59 kJ•mol^－1; 而Flynn-Wall-Ozawa法所求得的两个热分解阶段的表观活化能的平均值分别为138.75和106.78 kJ•mol^－1. 由Coats-Redfern法、Achar法得出DPTDEDA在空气中的热分解过程虽主要分为两段反应, 但经过推理其反应机理函数却是相同的, 为f(α)＝3/2(1－α)^4/3[(1－α)^－1/3－1]^－1.     

Synthesis and Thermal Decomposition Kinetics of Two Dy(III) Complexes with Benzoate Derivative and 2,2′‐Bipyridine as Co‐ligands

Two Dy(III) complexes with benzoate derivative and 2,2′‐bipyridine ligands, [Dy(2,4‐DClBA)₃bipy]₂ and [Dy(o‐MOBA)₃bipy]₂·4H₂O (2,4‐DClBA=2,4‐dichlorobenzoate; o‐MOBA=o‐methoxybenzoate; bipy=2,2′‐bipyridine), were prepared and characterized by elemental analysis, infrared spectra, ultraviolet spectra and thermogravimetry and differential thermogravimetry techniques. The thermal decomposition behavior of the two complexes under a static air atmosphere was discussed by thermogravimetry, differential thermogravimetry and infrared spectral techniques. The non‐isothermal kinetics were investigated by using a double equal‐double step method, a non‐linear isoconversional integral method and a Starink method. The mechanism functions of the first decomposition step for [Dy(2,4‐DClBA)₃bipy]₂ and the second decomposition step for [Dy(o‐MOBA)₃bipy]₂·4H₂O were determined. Meanwhile, the thermodynamic parameters (ΔH^ne;, ΔG^ne; and ΔS^ne;) and kinetic parameters (activation energy E and the pre‐exponential factor A) for the two complexes were also calculated.     

Kinetic and Thermodynamic Parameters of the Thermal Decomposition of Some Metal Complexes of 4‐Benzamido‐3‐Thiosemicarbazone Derivatives

The kinetic and thermodynamic parameters such as reaction order, activation energy, enthalpy, free energy and entropy change related to the thermal decomposition of Co(II), Ni(II) and Cu(II) hydrazone complexes of 4‐benzamido‐1‐(4‐actylpyridine)‐3‐thiosemicarbazone (BACPT) and 4‐benzamido‐1‐(pyridine‐3‐aldehye)‐3‐thiosemicarb‐azone (BAPT) were evaluated from differential thermal analysis (DTA) curves using Thomas‐Clarke's method. The thermal stability of these complexes are discussed in relation to the nature of the metalion and of the ligand present. A suitable mechanism for the thermal decomposition process of the complexes based on the data of the thermogravimetric analysis (TGA) was suggested.     

The thermal behaviour of BTAw, a high nitrogen fuel

BTAw (bis-(1(2)H-tetrazol-5yl)-amine monohydrate) has recently been considered for use as a low-smoke pyrotechnic fuel. There is relatively little information available in the literature concerning the thermal properties of BTAw or its precursors. In the present work, various thermoanalytical experiments were performed on BTAw and BTA (bis-(1(2)H-tetrazol-5yl)-amine) in an effort to better characterize the thermal stability and decomposition of these compounds. Variable heating rate studies were carried out on BTAw samples in a helium atmosphere using DSC and TG. Two steps were seen in the results: dehydration followed by decomposition. Kinetic parameters were determined for both of these steps using a number of methods. Experiments using simultaneous TG-DTA coupled with FTIR and MS were performed on BTAw in both helium and dry and CO₂ free air atmospheres, and evolved gas analysis was used to determine the gaseous decomposition products. The thermal stability of BTAw and BTA was examined using accelerating rate calorimetry (ARC).     

Kinetic analysis of thermal decomposition of some Co-complexes of three unsymmetrical <Emphasis Type="Italic">vic</Emphasis>-dioximes ligands

The thermal decomposition of three new reagent cyclohexylamine-p-tolylglyoxime (L₁H₂), tertiarybutyl amine-p-tolylglyoxime (L₂H₂) and secondary butylamine-p-tolylglyoxime (L₃H₂ and their Co-complexes were studied by both isothermal and nonisothermal methods. As expected, the complex structure of Co-complexes, different steps with different activation energies were realized in decomposition process. Model-fitting and model-free kinetic approaches were applied to nonisothermal and isothermal data. The kinetic triplet (f(α), A and E) related to nonisothermal model-fitting method can not be meaningfully compared with values obtained from isothermal method. The complex nature of the multi-step process of the studied compounds was more easily revealed using a wider temperature range in nonisothermal isoconversional method.     

Thermodynamic properties and thermal stability of the synthetic zinc formate dihydrate

Zinc formate dihydrate has been synthesized and characterized by powder X-ray diffraction, elemental analysis, FTIR spectra and thermal analysis. The molar heat capacity of the coordination compound was measured by a temperature modulated differential scanning calorimetry (TMDSC) over the temperature range from 200 to 330 K for the first time. The thermodynamic parameters such as entropy and enthalpy vs. 298.15 K based on the above molar heat capacity were calculated. The thermal decomposition characteristics of this compound were investigated by thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). TG curve showed that the thermal decomposition occurred in two stages. The first step was the dehydration process of the coordination compound, and the second step corresponded to the decomposition of the anhydrous zinc formate. The apparent activation energy of the dehydration step of the compound was calculated by the Kissinger method using experimental data of TG analysis. There are three sharply endothermic peaks in the temperature range from 300 to 650 K in DSC curve.     

Thermal study of TiO<Subscript>2</Subscript>–CeO<Subscript>2</Subscript> yellow ceramic pigment obtained by the Pechini method

TiO₂–CeO₂ oxides for application as ceramic pigments were synthesized by the Pechini method. In the present work the polymeric network of the pigment precursor was studied using thermal analysis. Results obtained using TG and DTA showed the occurrence of three main mass loss stages and profiles associated to the decomposition of the organic matter and crystallization. The kinetics of the degradation was evaluated by means of TG applying different heating rates. The activation energies (E _a) and reaction order (n) for each stage were determined using Horowitz–Metzger, Coats–Redfern, Kissinger and Broido methods. Values of E _a varying between 257–267 kJ mol^–1 and n=0–1 were found. According to the kinetic analysis the decomposition reactions were diffusion controlled.