Probing Charge-Transfer Processes in a Covalently Linked [Ge9]-Cluster Imine Dyad

C₆₀ donor dyads in which the carbon cage is covalently linked to an electron-donating unit have been discussed as one possibility for an electron-transfer system, and it has been shown that spherical [Ge₉] cluster anions show a close relation to fullerenes with respect to their electronic structure. However, the optical properties of these clusters and of functionalized cluster derivatives are almost unknown. We now report on the synthesis of the intensely red [Ge₉] cluster linked to an extended π-electron system. [Ge₉{Si(TMS)₃}₂{CH₃C=N}-DAB(II)^Dipp]⁻ ( 1⁻ ) is formed upon the reaction of [Ge₉{Si(TMS)₃}₂]²⁻ with bromo-diazaborole DAB(II)^Dipp-Br in CH₃CN (TMS=trimethylsilyl; DAB(II)=1,3,2-diazaborole with an unsaturated backbone; Dipp=2,6-di-iso-propylphenyl). Reversible protonation of the imine entity in 1⁻ yields the deep green, zwitterionic cluster [Ge₉{Si(TMS)₃}₂{CH₃C=N(H)}-DAB(II)^Dipp] ( 1-H ) and vice versa. Optical spectroscopy combined with time-dependent density functional theory suggests a charge-transfer excitation between the cluster and the antibonding π* orbital of the imine moiety as the cause of the intense coloration. An absorption maximum of 1-H in the red region of the electromagnetic spectrum and the corresponding lowest-energy excited state at λ=669 nm make the compound an interesting starting point for further investigations targeting the design of photo-active cluster compounds.     

Enhancing the Variability of [Ge9] Cluster Chemistry through Phosphine Functionalization

The synthetic approach towards molecules that contain Ge atoms with oxidation state 0, and which are exclusively connected to other Ge atoms, is explored by using anionic clusters extracted from binary solids. Besides providing a novel variable method for the introduction of alkenyl moieties to [Ge₉] cluster compounds, this work expands the spectrum of mixed-functionalized [Ge₉] cluster anions, which are suitable for the straightforward synthesis of zwitterionic compounds upon coordination to metal cations. In detail, the synthesis of a series of mixed-functionalized [Ge₉] clusters is reported, including [Ge₉{Si(TMS)₃}₃PRR^I] (R=tBu, R^I=(CH₂)₃CH=CH₂; 2 ) and [Ge₉{Si(TMS)₃}₂PRR^I]⁻ (R and R^I: alkyl, alkenyl, aryl, aminoalkyl; 3 a to 11 a , TMS: (trimethyl)silyl). In 2 and 3 a , pentenyl functionalization of the [Ge₉] clusters was achieved by reaction of the novel chlorophosphine tBu{(CH₂)₃CH=CH₂}PCl ( 1 ) with silylated [Ge₉] clusters. Furthermore, the reactivity of the cluster anions 3 a to 11 a towards NHC^DippMCl (NHC^Dipp=1,3-di(2,6-diisopropylphenyl)imidazolylidine; M=Cu, Ag) showed a dependency on the steric demand of the phosphine either zwitterions ( 3 -MNHC^Dipp to 7 -MNHC^Dipp) featuring P–M interactions are formed, or Ge–M coordination ( 8 -MNHC^Dipp to 11 -MNHC^Dipp) occurs. For M=Ag, the formation of zwitterionic complexes was unequivocally proven by NMR investigations showing ¹J(³¹P-¹⁰⁷Ag/¹⁰⁹Ag) spin-spin coupling.     

Functionalization of [Ge9] with Small Silanes:[Ge9(SiR3)3]– (R = iBu,iPr, Et) and the Structures of (CuNHCDipp)[Ge9{Si(iBu)3}3], (K‐18c6)Au[Ge9{Si(iBu)3}3]2, and (K‐18c6)2[Ge9{Si(iBu)3}2]

Novel silylation reactions at [Ge₉] Zintl clusters starting from the chlorosilanes SiR₃Cl (R = iBu, iPr, Et) and the Zintl phase K₄Ge₉ are reported. The formation of the tris‐silylated anions [Ge₉(SiR₃)₃]^– [R = iBu ( 1a ), iPr ( 1b ), Et ( 1c )] by heterogeneous reactions in acetonitrile was monitored by ESI‐MS measurements. For R = iBu ¹H, ¹³C and ²⁹Si NMR experiments confirmed the exclusive formation of 1a . Subsequent reactions of 1a with CuNHC^DippCl and Au(PPh₃)Cl result in formation of the neutral metal complex (CuNHC^Dipp)[Ge₉{Si(iBu)₃}₃]·0.5 tol ( 2 ·0.5 tol) and the metal bridged dimeric unit {Au[Ge₉{Si(iBu)₃}₃]₂}^– ( 3a ), isolated as a (K‐18c6)⁺ salt in (K‐18c6)Au[Ge₉{Si(iBu)₃}₃]₂·tol ( 3 ·tol), respectively. Finally, from a toluene/hexane solution of 1a in presence of 18‐crown‐6, crystals of the compound (K‐18c6)₂[Ge₉{Si(iBu)₃}₂]·tol ( 4 ·tol), containing the bis‐silylated cluster anion [Ge₉(Si(iBu)₃)₂]^2– ( 4a ), were obtained. The compounds 2 ·0.5 tol, 3 ·tol and 4 ·tol were characterized by single‐crystal structure determination.     

On the Reactivity of Silylated Ge9 Clusters: Synthesis and Characterization of [ZnCp*(Ge9{Si(SiMe3)3}3)], [CuPiPr3(Ge9{Si(SiMe3)3}3)], and [(CuPiPr3)4{Ge9(SiPh3)2}2]

We report on the synthesis of new derivatives of silylated clusters of the type [Ge₉(SiR₃)₃]^? (R = SiMe₃, Me = CH₃; R = Ph, Ph = C₆H₅) as well as on their reactivity towards copper and zinc compounds. The silylated cluster compounds were synthesized by heterogeneous reactions starting from the Zintl phase K₄Ge₉. Reaction of K[Ge₉{Si(SiMe₃)₃}₃] with ZnCl₂ leads to the already known dimeric compound [Zn(Ge₉{Si(SiMe₃)₃}₃)₂] ( 1 ), whereas upon the reaction with [ZnCp*₂] the coordination of [ZnCp*]⁺ to the cluster takes place (Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) under the formation of [ZnCp*(Ge₉{Si(SiMe₃)₃}₃)] ( 2 ). A similar reaction leads to [CuPiPr₃(Ge₉{Si(SiMe₃)₃}₃)] ( 3 ) from [CuPiPr₃Cl] (iPr=isopropyl). Further we investigated the novel silylated cluster units [Ge₉(SiPh₃)₃]^? ( 4 ) and [Ge₉(SiPh₃)₂]^? ( 5 ), which could be identified by mass spectroscopy. Bis‐ and tris‐silylated species can be synthesized by the respective stoichiometric reactions, and the products were characterized by ESI‐MS and NMR experiments. These clusters show rather different reactivity. The reaction of the tris‐silylated anion 4 with [CuPiPr₃Cl] leads to [(CuPiPr₃)₃Ge₉(SiPh₃)₂]⁺ as shown from NMR experiments and to [(CuPiPr₃)₄{Ge₉(SiPh₃)₂}₂] ( 6 ), which was characterized by single‐crystal X‐ray diffraction. Compound 6 shows a new type of coordination of the Cu atoms to the silylated Zintl clusters.     

Metal–metal bonded alkaline-earth distannyls

The first families of alkaline-earth stannylides [Ae(SnPh₃)₂·(thf)_x] (Ae = Ca, x = 3, 1; Sr, x = 3, 2; Ba, x = 4, 3) and [Ae{Sn(SiMe₃)₃}₂·(thf)_x] (Ae = Ca, x = 4, 4; Sr, x = 4, 5; Ba, x = 4, 6), where Ae is a large alkaline earth with direct Ae–Sn bonds, are presented. All complexes have been characterised by high-resolution solution NMR spectroscopy, including ¹¹⁹Sn NMR, and by X-ray diffraction crystallography. The molecular structures of [Ca(SnPh₃)₂·(thf)₄] (1′), [Sr(SnPh₃)₂·(thf)₄] (2′), [Ba(SnPh₃)₂·(thf)₅] (3′), 4, 5 and [Ba{Sn(SiMe₃)₃}₂·(thf)₅] (6′), most of which crystallised as higher thf solvates than their parents 1–6, were established by XRD analysis; the experimentally determined Sn–Ae–Sn′ angles lie in the range 158.10(3)–179.33(4)°. In a given series, the ¹¹⁹Sn NMR chemical shifts are slightly deshielded upon descending group 2 from Ca to Ba, while the silyl-substituted stannyls are much more shielded than the phenyl ones (δ¹¹⁹Sn/ppm: 1′, −133.4; 2′, −123.6; 3′, −95.5; 4, −856.8; 5, −848.2; 6′, −792.7). The bonding and electronic properties of these complexes were also analysed by DFT calculations. The combined spectroscopic, crystallographic and computational analysis of these complexes provide some insight into the main features of these unique families of homoleptic complexes. A comprehensive DFT study (Wiberg bond index, QTAIM and energy decomposition analysis) points at a primarily ionic Ae–Sn bonding, with a small covalent contribution, in these series of complexes; the Sn–Ae–Sn′ angle is associated with a flat energy potential surface around its minimum, consistent with the broad range of values determined by experimental and computational methods.

The complete series of heterobimetallic alkaline-earth distannyls [Ae{SnR₃}₂·(thf)_x] (Ae = Ca, Sr, Ba) have been prepared for R = Ph and SiMe₃, and their bonding and electronic properties have been comprehensively investigated.     

Stable monovalent aluminum(i) in a reduced phosphomolybdate cluster as an active acid catalyst

Low-valent aluminum Al(i) chemistry has attracted extensive research interest due to its unique chemical and catalytic properties but is limited by its low stability. Herein, a hourglass phosphomolybdate cluster with a metal-center sandwiched by two benzene-like planar subunits and large steric-hindrance is used as a scaffold to stabilize low-valent Al(i) species. Two hybrid structures, (H₃O)₂(H₂bpe)₁₁[Al^III(H₂O)₂]₃{[Al^I(P₄Mo^V₆O₃₁H₆)₂]₃·7H₂O (abbr. Al₆{P₄Mo₆}₆) and (H₃O)₃(H₂bpe)₃[Al^I(P₄Mo^V₆O₃₁H₇)₂]·3.5H₂O (abbr. Al{P₄Mo₆}₂) (bpe = trans-1,2-di-(4-pyridyl)-ethylene) were successfully synthesized with Al(i)-sandwiched polyoxoanionic clusters as the first inorganic-ferrocene analogues of a monovalent group 13 element with dual Lewis and Brønsted acid sites. As dual-acid catalysts, these hourglass structures efficiently catalyze a solvent-free four-component domino reaction to synthesize 1,5-benzodiazepines. This work provides a new strategy to stabilize low-valent Al(i) species using a polyoxometalate scaffold.

Monovalent aluminum(i) species was successfully stabilized using a reduced phosphomolybdate scaffold as a dual-acid catalyst for a four-component domino reaction.

Low- or sub-valence aluminum compounds are increasingly growing into a significant frontier subject in coordination and modern organic synthetic chemistry owing to their unique singlet carbene character, Lewis acid/base properties and catalytic reactivity.¹ However, low-valence aluminum(i) compounds have inherent electron deficiency and exhibit thermodynamic instability, making them prone to self-polymerization with metal–metal bonds² or disproportionation³ to metallic Al and Al(iii) species. Inspired by the special stabilizing effect of metallocene compounds, a ligand stabilization strategy has recently been undertaken to stabilize the low-valence aluminum center.^4,5 In this regard, the utilized ligand should satisfy two key criteria: (i) sufficient steric hindrance is required to inhibit monomer polymerization; and (ii) a suitable electronic effect is needed to stabilize the aluminum(i) center. A few organometallic Al(i) compounds protected by bulky organic groups have been prepared such as [(Cp*Al)₄] (Cp* = C₅Me₅),⁶ and [(CMe₃)₃SiAl₄].⁷ However, despite having the ligand effect, most of these Al(i) compounds still decompose in aqueous solutions or heating conditions. In contrast to organometallic Al(i) compounds, inorganic Al(i) structures, i.e. monomeric monohalides, only exist in gaseous form at high temperature⁸ and to the best of our knowledge, no stable inorganic Al(i) compound is known at room temperature due to thermodynamic instability. Therefore, exploring efficient strategies to synthesize stable inorganic Al(i) compounds remains highly desired but a great challenge.Polyoxometalates (POMs), a diverse family of inorganic molecular clusters based on early-transition metals (W, Mo, V, Nb, and Ta), have extensively attracted attention in research in various fields of materials science, coordination chemistry, medicinal chemistry and catalysis science.^9–11 Owing to their adjustable constituent elements and well-defined structures, POMs have been considered as promising inorganic ligands to stabilize high- and low-valent metal ions. For instance, Rompel et al.¹² reported one Keggin-type [α-CrW₁₂O₄₀]⁵⁻ anion in which a labile {Cr^IIIO₄} tetrahedral unit was assembled at the center of the cluster. Li and co-workers employed a monolacunary Keggin-type inorganic ligand to stabilize a high-valent Cu³⁺ ion.¹³ As a unique member of the POM family, the hourglass-type phosphomolybdate cluster {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ (abbr. M{P₄Mo₆}₂), consisting of two [P₄Mo^V₆O₃₁]¹²⁻ (abbr. {P₄Mo₆}₂) subunits bridged by one metal (M) center, represents a fully reduced metal-oxo cluster. With all Mo atoms in the oxidation state of (+5), a more negative charge is endowed to the cluster surface.^14,15 Such high electron density of {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ polyoxoanions provides an electron-rich local environment for the possible stabilization of unusual-valence metals. It is worth noting that the [P₄Mo^V₆O₃₁]¹²⁻ subunit presents near-planar triangular structures with the side sizes ranging from 7.50–7.92 Å (Fig. S1^†). The structural feature can supply sufficient steric hindrance to restrain the polymerization of low-valence metal species. Moreover, the six Mo atoms in each [P₄Mo^V₆O₃₁]¹²⁻ subunit arrange in a planar hexagonal-ring structure like a benzene ring, implying that such {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ clusters may have a similar delocalized electron structure to conjugated benzene or cyclopentadiene. These features make [P₄Mo^V₆O₃₁]¹²⁻ a promising candidate with respect to organic protecting groups to construct an inorganic ‘ferrocene’ analogue of Al(i) (Scheme 1). Therefore, we hypothesize that hourglass-type polyoxoanion clusters are promising to stabilize the labile Al(i) center and isolate inorganic Al(i) species.Open in a separate windowScheme 1Similar ferrocene-like sandwich structure features of an inorganic hourglass-type [Al^I(P₄Mo^V₆O₃₁)₂]²³⁻ polyanion to an organometallic [(η⁵-Cp*)₂Al^I]⁺ cation.Herein, we show a [P₄Mo^V₆O₃₁]¹²⁻ cluster as an inorganic scaffold to stabilize the Al(i) center in two hybrid compounds, (H₃O)₂(H₂bpe)₁₁[Al^III(H₂O)₂]₃{[Al^I(P₄Mo^V₆O₃₁H₆)₂]₃·7H₂O (abbr. Al₆{P₄Mo₆}₆) and (H₃O)₃(H₂bpe)₃[Al^I(P₄Mo^V₆O₃₁H₇)₂]·3.5H₂O (abbr. Al{P₄Mo₆}₂) (bpe = trans-1,2-di-(4-pyridyl)-ethylene), in which the labile Al(i) center is sandwiched by two [P₄Mo^V₆O₃₁]¹²⁻ sides, forming an inorganic moiety of a ‘ferrocene’ analogue. Both Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ are experimentally determined at room temperature for the first time, and prepared by hydrothermal reactions of Na₂MoO₄·2H₂O, H₃PO₄, AlCl₃·6H₂O, ethanol and N-containing bpe at 160 °C with slightly different pH values. Notably, the combination of ethanol, N-containing bpe and high hydrothermal temperature is a prerequisite to the isolation of Al(i) species. First, both ethanol and N-containing bpe were used to provide a reducing environment under hydrothermal conditions. By combining high temperature and pressure, sufficient energy is supplied to reduce Mo⁶⁺ and Al³⁺ ions to Mo⁵⁺ and Al⁺ species, respectively. Then, Mo⁵⁺ species and phosphoric acid molecules are assembled to form [P₄Mo₆O₃₁]¹²⁻ subunits, which are subsequently combined with Al⁺ ions to form hourglass-type [Al(P₄Mo₆O₃₁)₂]²³⁻, hence effectively stabilizing Al(i) species (Fig. 1). From the perspective of stereochemistry, two highly negative [P₄Mo₆O₃₁]¹²⁻ fragments, resembling the methyl cyclopentadiene organic group, sandwich one low-valent metal Al(i) center. Hence, the construction of a strong reducing hourglass-like skeleton makes it possible to stabilize the existing Al⁺ species.Open in a separate windowFig. 1Ball-and-stick diagram showing the assembly of the hourglass-type cluster {Al(P₄Mo₆)₂}.Single crystal X-ray diffraction revealed the hourglass-type {Al(P₄Mo₆)₂} cluster in Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ (Table S1^†), in which the [P₄Mo₆O₃₁]¹²⁻ subunits have a C₃ symmetry and display a near-planar structure formed by six edge-sharing {MoO₆} octahedra with alternating short Mo–Mo single bonds and long non-bonding Mo⋯Mo contacts. The side sizes of the {P₄Mo₆} subunit range from 7.50–7.92 Å, which supplies sufficient steric hindrance to restrain the polymerization or disproportionation of low-valence Al(i) species. All Mo atoms are in a reduced oxidation state of +5 and the central Al atoms are in the +1 oxidation state, as confirmed by bond valence calculations (Table S2^†). Thus, the synthesized Al{P₄Mo₆}₂ represents a fully reduced metal–oxygen cluster. Moreover, the six Mo atoms in each {P₄Mo₆} subunit present a benzene-like planar hexagonal-ring structure with a similar π-type delocalization electron interaction with Al(i) instead of organic bulky groups. Such π-type delocalization electron interaction constructs an inorganic ‘ferrocene’ analogue of Al(i) and produces sufficient delocalization energy to stabilize Al(i) species. Considering the formation mechanism of traditional metallocenes, {P₄Mo₆} subunits with a similar strong electron-donating ability and suitable steric-hindrance effect on Cp rings, augment the stability of Al(i) species. Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ compounds also present the first isolation of aluminum-sandwiched hourglass-type clusters in POM chemistry. Importantly, regarding the inherent and strong hydrolysis of aluminum species in water, these low-valent Al(i)-containing clusters represent the first example of stable solid-state inorganic sub-valent Al(i) compounds at room temperature.The asymmetric structure of Al₆{P₄Mo₆}₆ consists of two crystallographically independent {Al(P₄Mo₆)₂} clusters sandwiched by central Al(1) and Al(4) atoms, two bridging [Al(H₂O)₂]³⁺ (Al(2) and Al(3)) cations and six protonated bpe cations (Fig. S2^†). Aluminum centers involve two kinds of oxidation states: the central Al(1) and Al(4) are in the +1 state, while the bridging Al(2) and Al(3) are in the +3 state. Both Al(1) and Al(4) display the six-coordinated octahedral configuration and bridge two {P₄Mo₆} subunits to form two {Al^I(P₄Mo₆)₂} clusters. The average lengths of Al–O bonds are 2.318–2.324 Å for Al(1) and Al(4) (Table S3^†), which are slightly longer than those of classic Al–O bonds (1.90 Å) for Al(2) and Al(3), but close to that of the Al–O bond in silica-supported alkylaluminum(i) composites.^16–20 The long Al–O lengths for Al(1) and Al(4) centers may be ascribed to the lower electron cloud density located at the surface of the Al(i) cation, resulting in slightly longer bonds with the surrounding oxygen donors.^5,21 Moreover, the small distorted extents (sum((d_ij − d_ave)/d_ave)²/coordination number) of {Al(1)O₆} (3.86 × 10⁻⁴) and {Al(4)O₆} (1.89 × 10⁻³) indicate that they are in regular octahedral geometry. Moreover, another structural feature of Al₆{P₄Mo₆}₆ is that {Al^I(P₄Mo₆)₂} clusters are connected by bridging [Al(H₂O)₂]³⁺ cationic fragments (Al(2) and Al(3)), forming an unusual chain-like arrangement (Fig. 2a). It is worth noting that the 1-D chain contains a large repeating monomer with the maximum spacing of 81.69 Å, consisting of twelve Al-containing fragments ({–Al2–Al1–Al3–Al4–Al3–Al1–Al2–Al1–Al3–Al4–Al3–Al1–}). Such a long repeating monomer is rare. Each repeating monomer has two types of symmetric systems: Al(2) in the middle of the monomer plays a center of mirror symmetry and divides the whole repeating monomer into two equidistant half-units of {–Al1–Al3–Al4–Al3–Al1–}; Al(4) in each half-unit further acts as the reverse symmetric center of two {–Al3–Al1–Al2–} subunits. The two types of symmetrical systems form the infinitely extending chain-like structure in Al₆{P₄Mo₆}₆. Since bpe is a rigid and conjugated molecular structure, an effective π⋯π stacking interaction emerges and results in a honeycomb-like supramolecular organic moiety, which accommodates these 1-D inorganic chains and stabilizes the whole Al₆{P₄Mo₆}₆ framework (Fig. S3 and S4^†).Open in a separate windowFig. 2(a) One-dimensional (1D) inorganic structure in Al₆{P₄Mo₆}₆ with a length of repeating units of 81.69 Å, consisting of twelve Al-containing fragments ({–Al2–Al1–Al3–Al4–Al3–Al1–Al2–Al1–Al3–Al4–Al3–Al1–}). (b) Four kinds of coordination environments of {AlO₆} octahedra, respectively (i = 1 − x, y, 0.5 − z; ii = 0.5 − x, 1.5 − y, 1 − z).Al{P₄Mo₆}₂ has a similar structure to Al₆{P₄Mo₆}₆ (Table S4^†), wherein the most obvious difference is that {Al^I[P₄Mo₆]₂} clusters exist in isolated form and interact with the surrounding protonated bpe cations via hydrogen bonding to form into a 3-D supramolecular framework (Fig. S5 and S6^†). The different peripheral environment around the {Al^I[P₄Mo₆]₂} cluster can affect its acidity and catalytic activity.The solid-state ²⁷Al NMR spectrum of Al₆{P₄Mo₆}₆ depicts two distinct resonances at δ = −22.34 and 27.33 ppm due to the octahedrally coordinated Al^III and Al^I sites, respectively (Fig. 3a), indicating two types of Al local environments in Al₆{P₄Mo₆}₆. In contrast, Al{P₄Mo₆}₂ displays only one sharp signal at δ = 7.20 ppm due to the octahedrally coordinated Al^I sites (Fig. 3b). The observed narrow peak-width corresponds to the highly symmetric charge distribution at the aluminum nucleus, similar to the ferrocene analogue [(η⁵-Cp*)₂Al^I]⁺.⁵ Noticeably, Al^I resonance in Al₆{P₄Mo₆}₆ appears at a lower magnetic field compared to Al{P₄Mo₆}₂, due to the different peripheral environment around the hourglass {Al(P₄Mo₆)₂} cluster. XPS spectra of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ further affirm the valence states of Al and Mo elements (Fig. S7 and Table S5^†). The Al 2p XPS profile of Al₆{P₄Mo₆}₆ reveals two peaks at 74.39 and 73.75 eV ascribed to Al^III and Al^I, respectively (Fig. 3c). The area ratio of the two peaks is close to 1 : 1, in consistence with the chemical structure of Al₆{P₄Mo₆}₆. The high-resolution Al 2p XPS spectrum of Al{P₄Mo₆}₂ displays a weaker broad peak attributed to the low amount of Al⁺ (Fig. 3d). Moreover, the structural stabilities of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ were investigated by soaking them in water for 24 hours. Fig. S9–S11^† show the comparison of XRD, IR and XPS spectra of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ before and after soaking in water. It can be found that the characteristic diffraction peaks in XRD after soaking for 24 hours still show good agreement with the simulated data (Fig. S9^†). The characterized absorption bands in IR spectra also exhibit good match with the original Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ (Fig. S10^†). The XPS spectra of Al₆{P₄Mo₆}₆ after soaking in water were also obtained. There is basically no change in the high-resolution spectra of Al 2p with the Al^I/Al^III atomic ratios of ca. 1 : 1 (Fig. S11^†). The spectroscopic and theoretical observations verify that the low valence Al(i) species can stably exist in the reduced phosphomolybdates in the solid state (Fig. S12 and Table S6^†). Moreover, the acidities of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ were measured to be 0.27 and 0.442 mmol g⁻¹, respectively, demonstrating the promising potential of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ as dual-acid catalysts.Open in a separate windowFig. 3(a and b) ²⁷Al NMR spectra of solid Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂; (c and d) XPS spectra of Al in Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂.The catalytic performance of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ was evaluated via a solvent-free four-component domino reaction for the synthesis of pharmaceutical intermediate 1,5-benzodiazepine (Table 1). With Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ as catalysts, the yields of the final product 8aaa reach 83% and 75%, respectively (Table 1, entries 1 and 2). Almost no 8aaa is observed without the acid catalysts, even when the reaction is set for a long time (Table 1, entry 3). This clarifies the excellent catalytic performance of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂. Typical Brønsted acid p-TsOH and Lewis acid AlCl₃ as control samples yield only 43% and 29% 8aaa, respectively (Table 1, entries 4 and 5), much lower than those attained by Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ catalysts. Moreover, (H₂en)₁₂[{Na_0.8K_0.2(H₂O)}₂{Na[Mo₆O₁₂(OH)₃(HPO₄)₂(PO₄)₂]₂}₂]·7H₂O^22,23 (abbr. {Na[P₄Mo₆]₂}) in contrast achieved 72% yield of 8aaa in 30 min, slower than that of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂. This indicates the advantage of the unique dual-acid features of Al(i)-stabilized reduced phosphomolybdate clusters with multiple Lewis and Brønsted acid active centers, in which the synergistic effect between the Al species and reduced phosphomolybdate cluster contributes to the catalytic activity.Comparison tests of one-pot synthesis of 1,5-benzodiazepine 8aaavia a four-component domino reaction^a

Ga+-catalyzed hydrosilylation? About the surprising system Ga+/HSiR3/olefin,proof of oxidation with subvalent Ga+ and silylium catalysis with perfluoroalkoxyaluminate anions

Already 1 mol% of subvalent [Ga(PhF)₂]⁺[pf]⁻ ([pf]⁻ = [Al(OR^F)₄]⁻, R^F = C(CF₃)₃) initiates the hydrosilylation of olefinic double bonds under mild conditions. Reactions with HSiMe₃ and HSiEt₃ as substrates efficiently yield anti-Markovnikov and anti-addition products, while bulkier substrates such as HSiⁱPr₃ are less reactive. Investigating the underlying mechanism by gas chromatography and STEM analysis, we unexpectedly found that H₂ and metallic Ga⁰ formed. Without the addition of olefins, the formation of R₃Si–F–Al(OR^F)₃ (R = alkyl), a typical degradation product of the [pf]⁻ anion in the presence of a small silylium ion, was observed. Electrochemical analysis revealed a surprisingly high oxidation potential of univalent [Ga(PhF)₂]⁺[pf]⁻ in weakly coordinating, but polar ortho-difluorobenzene of E_1/2(Ga⁺/Ga⁰; oDFB) = +0.26–0.37 V vs. Fc⁺/Fc (depending on the scan rate). Apparently, subvalent Ga⁺, mainly known as a reductant, initially oxidizes the silane and generates a highly electrophilic, silane-supported, silylium ion representing the actual catalyst. Consequently, the [Ga(PhF)₂]⁺[pf]⁻/HSiEt₃ system also hydrodefluorinates C(sp³)–F bonds in 1-fluoroadamantane, 1-fluorobutane and PhCF₃ at room temperature. In addition, both catalytic reactions may be initiated using only 0.2 mol% of [Ph₃C]⁺[pf]⁻ as a silylium ion-generating initiator. These results indicate that silylium ion catalysis is possible with the straightforward accessible weakly coordinating [pf]⁻ anion. Apparently, the kinetics of hydrosilylation and hydrodefluorination are faster than that of anion degradation under ambient conditions. These findings open up new windows for main group catalysis.

Nobler than expected: subvalent [Ga(PhF)₂][pf] ([pf]⁻ = [Al{OC(CF₃)₃}₄]⁻) oxidizes hydrosilanes to silylium ions, allowing for catalytic hydrosilylation and hydrodefluorination and suggesting that silylium catalysis is possible with the [pf]− anion.     

Trends in trigonal prismatic Ln-[1]ferrocenophane complexes and discovery of a Ho3+ single-molecule magnet

Lanthanide metallocenophanes are an intriguing class of organometallic complexes that feature rare six-coordinate trigonal prismatic coordination environments of 4f elements with close intramolecular proximity to transition metal ions. Herein, we present a systematic study of the structural and magnetic properties of the ferrocenophanes, [LnFc₃(THF)₂Li₂]⁻, of the late trivalent lanthanide ions (Ln = Gd (1), Ho (2), Er (3), Tm (4), Yb (5), Lu (6)). One major structural trend within this class of complexes is the increasing diferrocenyl (Fc²⁻) average twist angle with decreasing ionic radius (r_ion) of the central Ln ion, resulting in the largest average Fc²⁻ twist angles for the Lu³⁺ compound 6. Such high sensitivity of the twist angle to changes in r_ion is unique to the here presented ferrocenophane complexes and likely due to the large trigonal plane separation enforced by the ligand (>3.2 Å). This geometry also allows the non-Kramers ion Ho³⁺ to exhibit slow magnetic relaxation in the absence of applied dc fields, rendering compound 2 a rare example of a Ho-based single-molecule magnet (SMM) with barriers to magnetization reversal (U) of 110–131 cm⁻¹. In contrast, compounds featuring Ln ions with prolate electron density (3–5) don''t show slow magnetization dynamics under the same conditions. The observed trends in magnetic properties of 2–5 are supported by state-of-the-art ab initio calculations. Finally, the magneto-structural relationship of the trigonal prismatic Ho-[1]ferrocenophane motif was further investigated by axial ligand (THF in 2) exchange to yield [HoFc₃(THF*)₂Li₂]⁻ (2-THF*) and [HoFc₃(py)₂Li₂]⁻ (2-py) motifs. We find that larger average Fc²⁻ twist angles (in 2-THF* and 2-py as compared to in 2) result in faster magnetic relaxation times at a given temperature.

Lanthanide ferrocenophanes are an intriguing class of organometallic complexes that feature rare six-coordinate trigonal prismatic coordination environments of 4f elements with close intramolecular proximity to iron ions.     

A New Synthetic Methodology in the Preparation of Bimetallic Chalcogenide Clusters via Cluster-to-Cluster Transformations

A decanuclear silver chalcogenide cluster, [Ag₁₀(Se){Se₂P(OⁱPr)₂}₈] (2) was isolated from a hydride-encapsulated silver diisopropyl diselenophosphates, [Ag₇(H){Se₂P(OⁱPr)₂}₆], under thermal condition. The time-dependent NMR spectroscopy showed that 2 was generated at the first three hours and the hydrido silver cluster was completely consumed after thirty-six hours. This method illustrated as cluster-to-cluster transformations can be applied to prepare selenide-centered decanuclear bimetallic clusters, [Cu_xAg_10-x(Se){Se₂P(OⁱPr)₂}₈] (x = 0–7, 3), via heating [Cu_xAg_7−x(H){Se₂P(OⁱPr)₂}₆] (x = 1–6) at 60 °C. Compositions of 3 were accurately confirmed by the ESI mass spectrometry. While the crystal 2 revealed two un-identical [Ag₁₀(Se){Se₂P(OⁱPr)₂}₈] structures in the asymmetric unit, a co-crystal of [Cu₃Ag₇(Se){Se₂P(OⁱPr)₂}₈]_0.6[Cu₄Ag₆(Se){Se₂P(OⁱPr)₂}₈]_0.4 ([3a]_0.6[3b]_0.4) was eventually characterized by single-crystal X-ray diffraction. Even though compositions of 2, [3a]_0.6[3b]_0.4 and the previous published [Ag₁₀(Se){Se₂P(OEt)₂}₈] (1) are quite similar (10 metals, 1 Se²⁻, 8 ligands), their metal core arrangements are completely different. These results show that different synthetic methods by using different starting reagents can affect the structure of the resulting products, leading to polymorphism.     

Cerium–quinone redox couples put under scrutiny

Homoleptic cerous complexes Ce[N(SiMe₃)₂]₃, [Ce{OSi(OtBu)₃}₃]₂ and [Ce{OSiⁱPr₃}₃]₂ were employed as thermally robust, weakly nucleophilic precursors to assess their reactivity towards 1,4-quinones in non-aqueous solution. The strongly oxidizing quinones 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) or tetrachloro-1,4-benzoquinone (Cl₄BQ) readily form hydroquinolato-bridged ceric complexes of the composition [(Ce^IVL₃)₂(μ₂-O₂C₆R₄)]. Less oxidising quinones like 2,5-di-tert-butyl-1,4-benzoquinone (tBu₂BQ) tend to engage in redox equilibria with the ceric hydroquinolato-bridged form being stable only in the solid state. Even less oxidising quinones such as tetramethyl-1,4-benzoquinone (Me₄BQ) afford cerous semiquinolates of the type [(Ce^IIIL₂(thf)₂)(μ₂-O₂C₆Me₄)]₂. All complexes were characterised by X-ray diffraction, ¹H, ¹³C{¹H} and ²⁹Si NMR spectroscopy, DRIFT spectroscopy, UV-Vis spectroscopy and CV measurements. The species putatively formed during the electrochemical reduction of [Ce^IV{N(SiMe₃)₂}₃]₂(μ₂-O₂C₆H₄) could be mimicked by chemical reduction with Co^IICp₂ yielding [(Ce^III{N(SiMe₃)₂}₃)₂(μ₂-O₂C₆H₄)][Co^IIICp₂]₂.

Para-quinones reveal distinct reactivity towards homoleptic cerous silylamide and siloxide complexes depending on both their oxidizing power and the supporting ligand L.     

Cerium(iv) complexes with guanidinate ligands: intense colors and anomalous electronic structures

A series of cerium(iv) mixed-ligand guanidinate–amide complexes, {[(Me₃Si)₂NC(NⁱPr)₂]_xCe^IV[N(SiMe₃)₂]_3−x}⁺ (x = 0–3), was prepared by chemical oxidation of the corresponding cerium(iii) complexes, where x = 1 and 2 represent novel complexes. The Ce(iv) complexes exhibited a range of intense colors, including red, black, cyan, and green. Notably, increasing the number of the guanidinate ligands from zero to three resulted in significant redshift of the absorption bands from 503 nm (2.48 eV) to 785 nm (1.58 eV) in THF. X-ray absorption near edge structure (XANES) spectra indicated increasing f occupancy (n_f) with more guanidinate ligands, and revealed the multiconfigurational ground states for all Ce(iv) complexes. Cyclic voltammetry experiments demonstrated less stabilization of the Ce(iv) oxidation state with more guanidinate ligands. Moreover, the Ce(iv) tris(guanidinate) complex exhibited temperature independent paramagnetism (TIP) arising from the small energy gap between the ground- and excited states with considerable magnetic moments. Computational analysis suggested that the origin of the low energy absorption bands was a charge transfer between guanidinate π orbitals that were close in energy to the unoccupied Ce 4f orbitals. However, the incorporation of sterically hindered guanidinate ligands inhibited optimal overlaps between Ce 5d and ligand N 2p orbitals. As a result, there was an overall decrease of ligand-to-metal donation and a less stabilized Ce(iv) oxidation state, while at the same time, more of the donated electron density ended up in the 4f shell. The results indicate that incorporating guanidinate ligands into Ce(iv) complexes gives rise to intense charge transfer bands and noteworthy electronic structures, providing insights into the stabilization of tetravalent lanthanide oxidation states.

A series of cerium(iv) mixed-ligand guanidinate-amide complexes, {[(Me₃Si)₂NC(NⁱPr)₂]_xCe^IV[N(SiMe₃)₂]_3−x}+ (x = 0−3), was prepared by chemical oxidation and studied spectroscopically and computationally, revealing trends in 4f/5d orbital occupancies.     

Subvalente Galliumtriflate – mögliche Ausgangsverbindungen für Clusterverbindungen des Galliums

Subvalent Gallium Triflates – Potentially Useful Starting Materials for Gallium Cluster Compounds By reaction of GaCp* with trifluormethanesulfonic acid in hexane a mixture of gallium trifluormethanesulfonates (triflates, OTf) is obtained. This mixture reacts readily with lithiumsilanides [Li(thf)₃Si(SiMe₃)₂R] (R = Me, SiMe₃) to afford the cluster compounds [Ga₆{Si(SiMe₃)Me}₆], [Ga₂{Si(SiMe₃)₃}₄] and [Ga₁₀{Si(SiMe₃)₃}₆]. By crystallization from various solvents the gallium triflates [Ga(OTf)₃(thf)₃], [HGa(OTf)(thf)₄]⁺ [Ga(OTf)₄(thf)₃]⁻, [Cp*GaGa(OTf)₂]₂ and [Ga(toluene)₂]⁺ [Ga₅(OTf)₆(Cp*)₂]⁻ were isolated and characterized by single crystal X ray structure analysis.     

Mono- and Binuclear Copper(II) and Nickel(II) Complexes with the 3,6-Bis(picolylamino)-1,2,4,5-Tetrazine Ligand

Four new compounds of formulas [Cu(hfac)₂(L)] (1), [Ni(hfac)₂(L)] (2), [{Cu(hfac)₂}₂(µ-L)]·2CH₃OH (3) and [{Ni(hfac)₂}₂(µ-L)]·2CH₃CN (4) [Hhfac = hexafluoroacetylacetone and L = 3,6-bis(picolylamino)-1,2,4,5-tetrazine] have been prepared and their structures determined by X-ray diffraction on single crystals. Compounds 1 and 2 are isostructural mononuclear complexes where the metal ions [copper(II) (1) and nickel(II) (2)] are six-coordinated in distorted octahedral MN₂O₄ surroundings which are built by two bidentate hfac ligands plus another bidentate L molecule. This last ligand coordinates to the metal ions through the nitrogen atoms of the picolylamine fragment. Compounds 3 and 4 are centrosymmetric homodinuclear compounds where two bidentate hfac units are the bidentate capping ligands at each metal center and a bis-bidentate L molecule acts as a bridge. The values of the intramolecular metal···metal separation are 7.97 (3) and 7.82 Å (4). Static (dc) magnetic susceptibility measurements were carried out for polycrystalline samples 1–4 in the temperature range 1.9–300 K. Curie law behaviors were observed for 1 and 2, the downturn of χ_MT in the low temperature region for 2 being due to the zero-field splitting of the nickel(II) ion. Very weak [J = −0.247(2) cm⁻¹] and relatively weak intramolecular antiferromagnetic interactions [J = −4.86(2) cm⁻¹] occurred in 3 and 4, respectively (the spin Hamiltonian being defined as H = −JS₁·S₂). Simple symmetry considerations about the overlap between the magnetic orbitals across the extended bis-bidentate L bridge in 3 and 4 account for their magnetic properties.     

Revealing the composition-dependent structural evolution fundamentals of bimetallic nanoparticles through an inter-particle alloying reaction

Alloy nanoparticles represent one of the most important metal materials, finding increasing applications in diverse fields of catalysis, biomedicine, and nano-optics. However, the structural evolution of bimetallic nanoparticles in their full composition spectrum has been rarely explored at the molecular and atomic levels, imparting inherent difficulties to establish a reliable structure–property relationship in practical applications. Here, through an inter-particle reaction between [Au₄₄(SR)₂₆]²⁻ and [Ag₄₄(SR)₃₀]⁴⁻ nanoparticles or nanoclusters (NCs), which possess the same number of metal atoms, but different atomic packing structures, we reveal the composition-dependent structural evolution of alloy NCs in the alloying process at the molecular and atomic levels. In particular, an inter-cluster reaction can produce three sets of Au_xAg_44−x NCs in a wide composition range, and the structure of Au_xAg_44−x NCs evolves from Ag-rich [Au_xAg_44−x(SR)₃₀]⁴⁻ (x = 1–12), to evenly mixed [Au_xAg_44−x(SR)₂₇]³⁻ (x = 19–24), and finally to Au-rich [Au_xAg_44−x(SR)₂₆]²⁻ (x = 40–43) NCs, with the increase of the Au/Ag atomic ratio in the NC composition. In addition, leveraging on real-time electrospray ionization mass spectrometry (ESI-MS), we reveal the different inter-cluster reaction mechanisms for the alloying process in the sub-3-nm regime, including partial decomposition–reconstruction and metal exchange reactions. The molecular-level inter-cluster reaction demonstrated in this study provides a fine chemistry to customize the composition and structure of bimetallic NCs in their full alloy composition spectrum, which will greatly increase the acceptance of bimetallic NCs in both basic and applied research.

An inter-particle reaction between atomically precise [Au₄₄(SR)₂₆]²⁻ (SR = thiolate) and [Ag₄₄(SR)₃₀]⁴⁻ nanoparticles reveals the composition-dependent structural evolution of alloy Au_xAg_44−x nanoparticles at the atomic level.     

Polymerization Isomerism in Co-M (M = Cu,Ag, Au) Carbonyl Clusters: Synthesis,Structures and Computational Investigation

The reaction of [Co(CO)₄]⁻ (1) with M(I) compounds (M = Cu, Ag, Au) was reinvestigated unraveling an unprecedented case of polymerization isomerism. Thus, as previously reported, the trinuclear clusters [M{Co(CO)₄}₂]⁻ (M = Cu, 2; Ag, 3; Au, 4) were obtained by reacting 1 with M(I) in a 2:1 molar ratio. Their molecular structures were corroborated by single-crystal X-ray diffraction (SC-XRD) on isomorphous [NEt₄][M{Co(CO)₄}₂] salts. [NEt₄](3)represented the first structural characterization of 3. More interestingly, changing the crystallization conditions of solutions of 3, the hexanuclear cluster [Ag₂{Co(CO)₄}₄]²⁻ (5) was obtained in the solid state instead of 3. Its molecular structure was determined by SC-XRD as Na₂(5)·C₄H₆O₂, [PPN]₂(5)·C₅H₁₂ (PPN = N(PPh₃)₂]⁺), [NBu₄]₂(5) and [NMe₄]₂(5) salts. 5 may be viewed as a dimer of 3 and, thus, it represents a rare case of polymerization isomerism (that is, two compounds having the same elemental composition but different molecular weights) in cluster chemistry. The phenomenon was further studied in solution by IR and ESI-MS measurements and theoretically investigated by computational methods. Both experimental evidence and density functional theory (DFT) calculations clearly pointed out that the dimerization process occurs in the solid state only in the case of Ag, whereas Cu and Au related species exist only as monomers.     

Exploiting host–guest chemistry to manipulate magnetic interactions in metallosupramolecular M4L6 tetrahedral cages

Reaction of Ni(OTf)₂ with the bisbidentate quaterpyridine ligand L results in the self-assembly of a tetrahedral, paramagnetic cage [Ni^II₄L₆]⁸⁺. By selectively exchanging the bound triflate from [OTf⊂Ni^II₄L₆](OTf)₇ (1), we have been able to prepare a series of host–guest complexes that feature an encapsulated paramagnetic tetrahalometallate ion inside this paramagnetic host giving [M^IIX₄⊂Ni^II₄L₆](OTf)₆, where M^IIX₄²⁻ = MnCl₄²⁻ (2), CoCl₄²⁻ (5), CoBr₄²⁻ (6), NiCl₄²⁻ (7), and CuBr₄²⁻ (8) or [M^IIIX₄⊂Ni^II₄L₆](OTf)₇, where M^IIIX₄⁻ = FeCl₄⁻ (3) and FeBr₄⁻ (4). Triflate-to-tetrahalometallate exchange occurs in solution and can also be accomplished through single-crystal-to-single-crystal transformations. Host–guest complexes 1–8 all crystallise as homochiral racemates in monoclinic space groups, wherein the four {NiN₆} vertexes within a single Ni₄L₆ unit possess the same Δ or Λ stereochemistry. Magnetic susceptibility and magnetisation data show that the magnetic exchange between metal ions in the host [Ni^II₄] complex, and between the host and the MX₄ⁿ⁻ guest, are of comparable magnitude and antiferromagnetic in nature. Theoretically derived values for the magnetic exchange are in close agreement with experiment, revealing that large spin densities on the electronegative X-atoms of particular MX₄ⁿ⁻ guest molecules lead to stronger host–guest magnetic exchange interactions.

The tetrahedral [Ni^II₄L₆]⁸⁺ cage can reversibly bind paramagnetic MX₄^1/2− guests, inducing magnetic exchange interactions between host and guest.     

Catalyst control of selectivity in the C–O bond alumination of biomass derived furans

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C–O bond of the heterocycle. Specifically, the reaction of [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl, 1) with furans proceeded between 25 and 80 °C leading to dearomatised products due to the net transformation of a sp² C–O bond into a sp² C–Al bond. The kinetics of the reaction of 1 with furan were found to be 1st order with respect to 1 with activation parameters ΔH^‡ = +19.7 (±2.7) kcal mol⁻¹, ΔS^‡ = −18.8 (±7.8) cal K⁻¹ mol⁻¹ and ΔG^‡_{298 K} = +25.3 (±0.5) kcal mol⁻¹ and a KIE of 1.0 ± 0.1. DFT calculations support a stepwise mechanism involving an initial (4 + 1) cycloaddition of 1 with furan to form a bicyclic intermediate that rearranges by an α-migration. The selectivity of ring-expansion is influenced by factors that weaken the sp² C–O bond through population of the σ*-orbital. Inclusion of [Pd(PCy₃)₂] as a catalyst in these reactions results in expansion of the substrate scope to include 2,3-dihydrofurans and 3,4-dihydropyrans and improves selectivity. Under catalysed conditions, the C–O bond that breaks is that adjacent to the sp²C–H bond. The aluminium(iii) dihydride reagent [{(MesNCMe)₂CH}AlH₂] (Mes = 2,4,6-trimethylphenyl, 2) can also be used under catalytic conditions to effect a dehydrogenative ring-expansion of furans. Further mechanistic analysis shows that C–O bond functionalisation occurs via an initial C–H bond alumination. Kinetic products can be isolated that are derived from installation of the aluminium reagent at the 2-position of the heterocycle. C–H alumination occurs with a KIE of 4.8 ± 0.3 consistent with a turnover limiting step involving oxidative addition of the C–H bond to the palladium catalyst. Isomerisation of the kinetic C–H aluminated product to the thermodynamic C–O ring expansion product is an intramolecular process that is again catalysed by [Pd(PCy₃)₂]. DFT calculations suggest that the key C–O bond breaking step involves attack of an aluminium based metalloligand on the 2-palladated heterocycle. The new methodology has been applied to important platform chemicals from biomass.

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C–O bond of the heterocycle.     

Reactivity of [Ge9{Si(SiMe3)3}3]− Towards Transition‐Metal M2+ Cations: Coordination and Redox Chemistry

Recently the metalloid cluster compound [Ge₉Hyp₃]^? ( 1 ; Hyp=Si(SiMe₃)₃) was oxidatively coupled by an iron(II) salt to give the largest metalloid Group 14 cluster [Ge₁₈Hyp₆]. Such redox chemistry is also possible with different transition metal (TM) salts TM²⁺ (TM=Fe, Co, Ni) to give the TM⁺ complexes [Fe(dppe)₂][Ge₉Hyp₃] ( 3 ; dppe=1,2‐bis(diphenylphosphino)ethane), [Co(dppe)₂][Ge₉Hyp₃] ( 4 ), [Ni(dppe)(Ge₉Hyp₃)] ( 5 ) and [Ni(dppe)₂(Ge₉Hyp₃)]⁺ ( 6 ). Such a redox reaction does not proceed for Mn, for which a salt metathesis gives the first open shell [Hyp₃Ge₉‐M‐Ge₉Hyp₃] cluster ( 2 ; M=Mn). The bonding of the transition metal atom to 1 is also possible for Ni (e.g., compound 6 ), in which one or even two nickel atoms can bind to 1 . In contrast to this in case of the Fe and Co compounds 3 and 4 , respectively, the transition‐metal atom is not bound to the Ge₉ core of 1 . The synthesis and the experimentally determined structures of 2 – 6 are presented. Additionally the bonding within 2 – 6 is analyzed and discussed with the aid of EPR measurements and quantum chemical calculations.     

[Ge9{Si(SiMe3)3}2{Ge(SiMe3)3}]–: The Mixed Substituted Metalloid Germanium Cluster and the Intermetalloid Cluster [ZnGe18{Si(SiMe3)3}4{Ge(SiMe3)3}2]

The novel metalloid germanium cluster [Ge₉(Hyp)₂Hyp^Ge]^– ( 1 ) was synthesized, exhibiting two different bulky groups [Hyp = Si(SiMe₃)₃; Hyp^Ge = Ge(SiMe₃)₃]. Further reaction of 1 with ZnCl₂ gives the derivative [ZnGe₁₈(Hyp)₄(Hyp^Ge)₂] ( 2 ) in good yield, showing that the substitution of Si(SiMe₃)₃ by Ge(SiMe₃)₃ within a metalloid Ge₉R₃^– compound leads to a comparable reactivity. 1 and 2 are characterized by NMR spectroscopy, mass spectrometry ( 1 ) and single crystal structure analyses ( 2 ). 1 and 2 are the first metalloid germanium clusters bearing germyl groups.     

The formyloxyl radical: electrophilicity,C–H bond activation and anti-Markovnikov selectivity in the oxidation of aliphatic alkenes

In the past the formyloxyl radical, HC(O)O˙, had only been rarely experimentally observed, and those studies were theoretical-spectroscopic in the context of electronic structure. The absence of a convenient method for the preparation of the formyloxyl radical has precluded investigations into its reactivity towards organic substrates. Very recently, we discovered that HC(O)O˙ is formed in the anodic electrochemical oxidation of formic acid/lithium formate. Using a [Co^IIIW₁₂O₄₀]⁵⁻ polyanion catalyst, this led to the formation of phenyl formate from benzene. Here, we present our studies into the reactivity of electrochemically in situ generated HC(O)O˙ with organic substrates. Reactions with benzene and a selection of substituted derivatives showed that HC(O)O˙ is mildly electrophilic according to both experimentally and computationally derived Hammett linear free energy relationships. The reactions of HC(O)O˙ with terminal alkenes significantly favor anti-Markovnikov oxidations yielding the corresponding aldehyde as the major product as well as further oxidation products. Analysis of plausible reaction pathways using 1-hexene as a representative substrate favored the likelihood of hydrogen abstraction from the allylic C–H bond forming a hexallyl radical followed by strongly preferred further attack of a second HC(O)O˙ radical at the C1 position. Further oxidation products are surmised to be mostly a result of two consecutive addition reactions of HC(O)O˙ to the C C double bond. An outer-sphere electron transfer between the formyloxyl radical donor and the [Co^IIIW₁₂O₄₀]⁵⁻ polyanion acceptor forming a donor–acceptor [D⁺–A⁻] complex is proposed to induce the observed anti-Markovnikov selectivity. Finally, the overall reactivity of HC(O)O˙ towards hydrogen abstraction was evaluated using additional substrates. Alkanes were only slightly reactive, while the reactions of alkylarenes showed that aromatic substitution on the ring competes with C–H bond activation at the benzylic position. C–H bonds with bond dissociation energies (BDE) ≤ 85 kcal mol⁻¹ are easily attacked by HC(O)O˙ and reactivity appears to be significant for C–H bonds with a BDE of up to 90 kcal mol⁻¹. In summary, this research identifies the reactivity of HC(O)O˙ towards radical electrophilic substitution of arenes, anti-Markovnikov type oxidation of terminal alkenes, and indirectly defines the activity of HC(O)O˙ towards C–H bond activation.

The formyloxyl radical, formed electrochemically, is electrophilic, yields anti-Markovnikov oxidation products from alkenes, and is effective for C–H bond activation.