Chemical Composition and Metabolomic Analysis of Amaranthus cruentus Grains Harvested at Different Stages

This study aimed at investigating the impact of early versus normal grain harvesting on the chemical composition and secondary metabolites of Amaranthus cruentus species grown in South Africa. Mature harvested grain had higher (p < 0.05) DM, CF, NDF and ADF content compared to prematurely harvested grain. There were no significant (p > 0.05) differences between CP, ADL and GE of premature and mature harvested grains. Mature harvesting resulted in higher grain Ca, P, Mg and K content. Essential amino acids spectrum and content remained similar regardless of maturity at harvest. The grains displayed an ample amount of unsaturated fatty acids; the highest percentage was linoleic acid: 38.75% and 39.74% in premature and mature grains, respectively. β-Tocotrienol was detected at 5.92 and 9.67 mg/kg in premature and mature grains, respectively. The lowest was δ-tocotrienol which was 0.01 and 0.54 mg/kg in premature and mature grains, respectively. Mature harvested grain had a higher secondary metabolite content compared to premature harvested grains. The results suggest that mature harvested Amaranthus cruentus grain contain more minerals and phytochemicals that have health benefits for human and livestock immunity and gut function, which ultimately improves performance. This study concludes that A. cruentus grown in South Africa is a potential alternative cereal to major conventional cereals.     

A Rapid Nano-Liquid Chromatographic Method for the Analysis of Cannabinoids in Cannabis sativa L. Extracts

Cannabis sativa L. is an herbaceous plant belonging to the family of Cannabaceae. It is classified into three different chemotypes based on the different cannabinoids profile. In particular, fiber-type cannabis (hemp) is rich in cannabidiol (CBD) content. In the present work, a rapid nano liquid chromatographic method (nano-LC) was proposed for the determination of the main cannabinoids in Cannabis sativa L. (hemp) inflorescences belonging to different varieties. The nano-LC experiments were carried out in a 100 µm internal diameter capillary column packed with a C18 stationary phase for 15 cm with a mobile phase composed of ACN/H₂O/formic acid, 80/19/1% (v/v/v). The reverse-phase nano-LC method allowed the complete separation of four standard cannabinoids in less than 12 min under isocratic elution mode. The nano-LC method coupled to ultraviolet (UV) detection was validated and applied to the quantification of the target analytes in cannabis extracts. The nano-LC system was also coupled to an electrospray ionization–mass spectrometry (ESI-MS) detector to confirm the identity of the cannabinoids present in hemp samples. For the extraction of the cannabinoids, three different approaches, including dynamic maceration (DM), ultrasound-assisted extraction (UAE), and an extraction procedure adapted from the French Pharmacopeia’s protocol on medicinal plants, were carried out, and the results achieved were compared.     

Yield,Characterization, and Possible Exploitation of Cannabis Sativa L. Roots Grown under Aeroponics Cultivation

Cannabis sativa L. has been used for a long time to obtain food, fiber, and as a medicinal and psychoactive plant. Today, the nutraceutical potential of C. sativa is being increasingly reappraised; however, C. sativa roots remain poorly studied, despite citations in the scientific literature. In this direction, we identified and quantified the presence of valuable bioactives (namely, β-sitosterol, stigmasterol, campesterol, friedelin, and epi-friedelanol) in the root extracts of C. sativa, a finding which might pave the way to the exploitation of the therapeutic potential of all parts of the C. sativa plant. To facilitate root harvesting and processing, aeroponic (AP) and aeroponic-elicited cultures (AEP) were established and compared to soil-cultivated plants (SP). Interestingly, considerably increased plant growth—particularly of the roots—and a significant increase (up to 20-fold in the case of β-sitosterol) in the total content of the aforementioned roots’ bioactive molecules were observed in AP and AEP. In conclusion, aeroponics, an easy, standardized, contaminant-free cultivation technique, facilitates the harvesting/processing of roots along with a greater production of their secondary bioactive metabolites, which could be utilized in the formulation of health-promoting and health-care products.     

Effect of the Distillation Time on the Chemical Composition,Antioxidant Potential and Antimicrobial Activity of Essential Oils from Different Cannabis sativa L. Cultivars

Within the unavoidable variability of various origins in the characteristics of essential oils, the aim of this study was to evaluate the effect of the distillation time on the chemical composition and biological activity of Cannabis sativa essential oils (EOs). The dry inflorescences came from Carmagnola, Kompolti, Futura 75, Gran Sasso Kush and Carmagnola Lemon varieties from Abruzzo region (Central Italy), the last two being new cultivar here described for the first time. EOs were collected at 2 h and 4 h of distillation; GC/MS technique was applied to characterize their volatile fraction. The EOs were evaluated for total polyphenol content (TPC), antioxidant capacity (AOC) and antimicrobial activity against food-borne pathogens and spoilage bacteria. The time of distillation particularly influenced EOs chemical composition, extracting more or less terpenic components, but generally enriching with minor sesquiterpenes and cannabidiol. A logical response in ratio of time was observed for antioxidant potential, being the essential oils at 4 h of distillation more active than those distilled for 2 h, and particularly Futura 75. Conversely, except for Futura 75, the effect of time on the antimicrobial activity was variable and requires further investigations; nevertheless, the inhibitory activity of all EOs against Pseudomonas fluorescens P34 was an interesting result.     

NMR-Based Metabolomic Analyses to Identify the Effect of Harvesting Frequencies on the Leaf Metabolite Profile of a Moringa oleifera Cultivar Grown in an Open Hydroponic System

Moringa oleifera Lam. is one of the world’s most useful medicinal plants. Different parts of the M. oleifera tree contain a rich profile of important minerals, proteins, vitamins, and various important bioactive compounds. However, there are differences in the phytochemical composition of the medicinal plant’s raw materials due to seasonal variation, cultivation practices, and post-harvest processing. The main objective of this study was therefore to determine the effect of harvesting frequencies on selected bioactive compounds of a M. oleifera cultivar (PKM1) grown in a hydroponic system under a shade net structure. Three harvesting frequency treatments were applied in the study, with the plants harvested at every 30 days (high frequency), 60 days (intermediate frequency), and 90 days (low frequency) respectively. ¹H-NMR was used for data acquisition, and multivariate data analysis by means of principal component analysis (PCA), partial least square discriminatory analysis (PLS-DA), and orthogonal partial least square discriminatory analysis (OPLS-DA) were applied to determine the changes in the leaf metabolite profile, and also to identify the spectral features contributing to the separation of samples. Targeted metabolite analysis was used to match the NMR peaks of the compounds with the NMR chemical shifts of the contribution plot. The contribution plot showed that the increase in concentration of some compounds in aliphatic, sugar and aromatic regions contributed to the separation of the samples. The results revealed that intermediate and low harvesting frequencies resulted in a change in the leaf metabolite profile. Compounds such as chlorogenic acid, ferulic acid, vanillic acid, wogonin, esculetin, niazirin, and gamma-aminobutyric acid (GABA) showed an increase under intermediate and low harvesting frequencies. These results provide insight into the effect of harvesting frequencies on the metabolite profile and associated medicinal activity of M. oleifera.     

Cannabinoids,Phenolics, Terpenes and Alkaloids of Cannabis

Cannabis sativa is one of the oldest medicinal plants in the world. It was introduced into western medicine during the early 19th century. It contains a complex mixture of secondary metabolites, including cannabinoids and non-cannabinoid-type constituents. More than 500 compounds have been reported from C. sativa, of which 125 cannabinoids have been isolated and/or identified as cannabinoids. Cannabinoids are C₂₁ terpeno-phenolic compounds specific to Cannabis. The non-cannabinoid constituents include: non-cannabinoid phenols, flavonoids, terpenes, alkaloids and others. This review discusses the chemistry of the cannabinoids and major non-cannabinoid constituents (terpenes, non-cannabinoid phenolics, and alkaloids) with special emphasis on their chemical structures, methods of isolation, and identification.     

Deeper Insight into the Volatile Profile of Rosa willmottiae with Headspace Solid-Phase Microextraction and GC–MS Analysis

As the distribution center of Rosa in the world, China has abundant wild germplasm resources, which can contribute to the breeding of modern roses. To explore the potential value of wild roses distributed in the Sichuan–Tibet region, solid phase microextraction (SPME) and gas chromatography–mass spectrometry (GC–MS) were used to determine the volatile organic compounds (VOCs) in Rosa willmottiae flowers at three flowering stages (bud stage, initial flowering stage, full flowering stage). Meanwhile, we compared the VOCs of R. willmottiae with different phenotypes (double flowers and single flowers). A total of 74 volatile compounds were identified. The results show that the essential substances belong to alcohols and terpenoids. The main volatile organic compounds are 2-phenyl ethanol (20.49%), benzyl alcohol (10.69%), β-maaliene (8.66%), geranyl acetate (8.47%), and (+)-α-long pinene (6.127%). Different flowering stages had great influence on the volatile profile, from the bud stage to full flowering stage; the content of terpenoids released decreased by 6.17%, whereas alcohols and esters increased by 8.58% and 11.56%, respectively. The chemical diversity and the content of the main components with a different phenotype were not significantly different. Our result will provide a theoretical basis for the development and utilization of Rosa willmottiae in Sichuan and Tibet.     

Elucidation of the Lipid Composition of Hemp (Cannabis sativa L.) Products by Means of Gas Chromatography and Ultra-High Performance Liquid Chromatography Coupled to Mass Spectrometry Detection

The growing demand in natural matrices that represent a source of dietary and nutraceutical molecules has led to an increasing interest in Cannabis sativa, considered to be a multipurpose, sustainable crop. Particularly, the considerable content in essential fatty acids (FAs) makes its derived-products useful food ingredients in the formulation of dietary supplements. In this research, the FA and triacylglycerol (TAG) composition of hempseed oils and flours were investigated using gas chromatography coupled to mass spectrometry and flame ionization detection as well as liquid chromatography coupled to mass spectrometry (LC-MS), respectively. Furthermore, a recently introduced linear retention index (LRI) approach in LC was successfully employed as a useful tool for the reliable identification of TAG species. A total of 30 FAs and 62 glycerolipids were positively identified in the investigated samples. Relative quantitative analyses confirmed linoleic acid as the most abundant component (50–55%). A favorable omega6/omega3 ratio was also measured in hemp-derived products, with the α-linolenic acid around 12–14%. Whereas, γ-linolenic acid was found to be higher than 1.70%. These results confirm the great value of Cannabis sativa as a source of valuable lipids, and the further improvement of the LRI system paves the way for the automatization of the identification process in LC.     

The Medicinal Natural Products of Cannabis sativa Linn.: A Review

Cannabis sativa is known among many cultures for its medicinal potential. Its complexity contributes to the historical application of various parts of the plant in ethno-medicines and pharmacotherapy. C. sativa has been used for the treatment of rheumatism, epilepsy, asthma, skin burns, pain, the management of sexually transmitted diseases, difficulties during child labor, postpartum hemorrhage, and gastrointestinal activity. However, the use of C. sativa is still limited, and it is illegal in most countries. Thus, this review aims to highlight the biological potential of the plant parts, as well as the techniques for the extraction, isolation, and characterization of C. sativa compounds. The plant produces a unique class of terpenophenolic compounds, called cannabinoids, as well as non-cannabinoid compounds. The exhaustive profiling of bioactive compounds and the chemical characterization and analysis of C. sativa compounds, which modern research has not yet fully achieved, is needed for the consistency, standardization, and the justified application of Cannabis sativa products for therapeutic purposes. Studies on the clinical relevance and applications of cannabinoids and non-cannabinoid phenols in the prevention and treatment of life-threatening diseases is indeed significant. Furthermore, psychoactive cannabinoids, when chemically standardized and administered under medical supervision, can be the legal answer to the use of C. sativa.     

Metabolomic Profiling of Fresh Goji (Lycium barbarum L.) Berries from Two Cultivars Grown in Central Italy: A Multi-Methodological Approach

The metabolite profile of fresh Goji berries from two cultivars, namely Big Lifeberry (BL) and Sweet Lifeberry (SL), grown in the Lazio region (Central Italy) and harvested at two different periods, August and October, corresponding at the beginning and the end of the maturation, was characterized by means of nuclear magnetic resonance (NMR) and electrospray ionization Fourier transform ion cyclotron resonance (ESI FT-ICR MS) methodologies. Several classes of compounds such as sugars, amino acids, organic acids, fatty acids, polyphenols, and terpenes were identified and quantified in hydroalcoholic and organic Bligh-Dyer extracts. Sweet Lifeberry extracts were characterized by a higher content of sucrose with respect to the Big Lifeberry ones and high levels of amino acids (glycine, betaine, proline) were observed in SL berries harvested in October. Spectrophotometric analysis of chlorophylls and total carotenoids was also carried out, showing a decrease of carotenoids during the time. These results can be useful not only to valorize local products but also to suggest the best harvesting period to obtain a product with a chemical composition suitable for specific industrial use. Finally, preliminary studies regarding both the chemical characterization of Goji leaves generally considered a waste product, and the biological activity of Big Lifeberry berries extracts was also investigated. Goji leaves showed a chemical profile rich in healthy compounds (polyphenols, flavonoids, etc.) confirming their promising use in the supplements/nutraceutical/cosmetic field. MG63 cells treated with Big Lifeberry berries extracts showed a decrease of iNOS, COX-2, IL-6, and IL-8 expression indicating their significant biological activity.     

Biotechnological Approaches on Two High CBD and CBG Cannabis sativa L. (Cannabaceae) Varieties: In Vitro Regeneration and Phytochemical Consistency Evaluation of Micropropagated Plants Using Quantitative 1H-NMR

High cannabidiol (CBD) and cannabigerol (CBG) varieties of Cannabis sativa L., a species with medicinal properties, were regenerated in vitro. Explants of nodal segments including healthy axillary bud, after sterilization, were placed in Murashige-Skoog (MS) culture medium. The shoots formed after 30 days were subcultured in full- or half-strength MS medium supplemented with several concentrations of 6-benzyl-amino-purine (BA) or thidiazuron (TDZ). The highest average number and length of shoots was achieved when both full and half-strength MS media were supplemented with 4.0 μM BA. The presence of 4.0 μM TDZ showed also comparable results. BA and TDZ at concentrations of 4.0, 8.0 μM and 2.0, 4.0 μM respectively, displayed the maximum shooting frequency. The new shoots were transferred on the same media and were either self-rooted or after being enhanced with different concentrations of indole-3-butyric acid (IBA) or α-naphthalene acetic acid (NAA). Presence of 2.0 or 4.0 μM IBA or 4.0 μM NAA resulted to the optimum rooting rates. The maximum average number and length of roots per shoot was observed when the culture media was supplemented with 4.0 μM IBA or NAA. Approximately 92% of the plantlets were successfully established and acclimatized in field. The consistency of the chemical profile of the acclimatized in vitro propagated clones was assessed using quantitative ¹H-NMR high throughput screening. In each variety, analysis of the micropropagated plant in comparison with the mother plant showed no statistically significant differences (p ≤ 0.05) in CBD+ cannabidiolic acid (CBDA) and CBG+ cannabigerolic acid (CBGA) content respectively, thus indicating stability of their chemical profile.     

Cannabis-Derived Compounds Cannabichromene and Δ9-Tetrahydrocannabinol Interact and Exhibit Cytotoxic Activity against Urothelial Cell Carcinoma Correlated with Inhibition of Cell Migration and Cytoskeleton Organization

Cannabis sativa contains more than 500 constituents, yet the anticancer properties of the vast majority of cannabis compounds remains unknown. We aimed to identify cannabis compounds and their combinations presenting cytotoxicity against bladder urothelial carcinoma (UC), the most common urinary system cancer. An XTT assay was used to determine cytotoxic activity of C. sativa extracts on T24 and HBT-9 cell lines. Extract chemical content was identified by high-performance liquid chromatography (HPLC). Fluorescence-activated cell sorting (FACS) was used to determine apoptosis and cell cycle, using stained F-actin and nuclei. Scratch and transwell assays were used to determine cell migration and invasion, respectively. Gene expression was determined by quantitative Polymerase chain reaction (PCR). The most active decarboxylated extract fraction (F7) of high-cannabidiol (CBD) C. sativa was found to contain cannabichromene (CBC) and Δ9-tetrahydrocannabinol (THC). Synergistic interaction was demonstrated between CBC + THC whereas cannabinoid receptor (CB) type 1 and type 2 inverse agonists reduced cytotoxic activity. Treatments with CBC + THC or CBD led to cell cycle arrest and cell apoptosis. CBC + THC or CBD treatments inhibited cell migration and affected F-actin integrity. Identification of active plant ingredients (API) from cannabis that induce apoptosis and affect cell migration in UC cell lines forms a basis for pre-clinical trials for UC treatment.     

Valorization of Byproducts of Hemp Multipurpose Crop: Short Non-Aligned Bast Fibers as a Source of Nanocellulose

Nanocellulose was extracted from short bast fibers, from hemp (Cannabis sativa L.) plants harvested at seed maturity, non-retted, and mechanically decorticated in a defibering apparatus, giving non-aligned fibers. A chemical pretreatment with NaOH and HCl allowed the removal of most of the non-cellulosic components of the fibers. No bleaching was performed. The chemically pretreated fibers were then refined in a beater and treated with a cellulase enzyme, followed by mechanical defibrillation in an ultrafine friction grinder. The fibers were characterized by microscopy, infrared spectroscopy, thermogravimetric analysis and X-ray diffraction after each step of the process to understand the evolution of their morphology and composition. The obtained nanocellulose suspension was composed of short nanofibrils with widths of 5–12 nm, stacks of nanofibrils with widths of 20–200 nm, and some larger fibers. The crystallinity index was found to increase from 74% for the raw fibers to 80% for the nanocellulose. The nanocellulose retained a yellowish color, indicating the presence of some residual lignin. The properties of the nanopaper prepared with the hemp nanocellulose were similar to those of nanopapers prepared with wood pulp-derived rod-like nanofibrils.     

NMR Spectroscopy Applied to the Metabolic Analysis of Natural Extracts of Cannabis sativa

Cannabis sativa is a herbaceous multiple-use species commonly employed to produce fiber, oil, and medicine. It is now becoming popular for the high nutritional properties of its seed oil and for the pharmacological activity of its cannabinoid fraction in inflorescences. The present study aims to apply nuclear magnetic resonance (NMR) spectroscopy to provide useful qualitative and quantitative information on the chemical composition of seed and flower Cannabis extracts obtained by ultra-sound-assisted extraction, and to evaluate NMR as an alternative to the official procedure for the quantification of cannabinoids. The estimation of the optimal ω-6/ω-3 ratio from the ¹H NMR spectrum for the seed extracts of the Futura 75 variety and the quantitative results from the ¹H and ¹³C NMR spectra for the inflorescence extracts of the Tiborszallasi and Kompolti varieties demonstrate that NMR technology represents a good alternative to classical chromatography, supplying sufficiently precise, sensitive, rapid, and informative data without any sample pre-treatment. In addition, different extraction procedures were tested and evaluated to compare the elaboration of spectral data with the principal component analysis (PCA) statistical method and the quantitative NMR results: the extracts obtained with higher polarity solvents (acetone or ethanol) were poor in psychotropic agents (THC < LOD) but had an appreciable percentage of both cannabinoids and triacylgliceroles (TAGs). These bioactive-rich extracts could be used in the food and pharmaceutical industries, opening new pathways for the production of functional foods and supplements.     

Green Synthesis,Characterization, and Antibacterial Properties of Silver Nanoparticles Obtained by Using Diverse Varieties of Cannabis sativa Leaf Extracts

Cannabis sativa L. (hemp) is a plant used in the textile industry and green building material industry, as well as for the phytoremediation of soil, medical treatments, and supplementary food products. The synergistic effect of terpenes, flavonoids, and cannabinoids in hemp extracts may mediate the biogenic synthesis of metal nanoparticles. In this study, the chemical composition of aqueous leaf extracts of three varieties of Romanian hemp (two monoecious, and one dioecious) have been determined by Fourier-Transformed Infrared spectroscopy (FT-IR), high-performance liquid chromatography, and mass spectrometry (UHPLC-DAD-MS). Then, their capability to mediate the green synthesis of silver nanoparticles (AgNPs) and their pottential antibacterial applications were evaluated. The average antioxidant capacity of the extracts had 18.4 ± 3.9% inhibition determined by 2,2-diphenyl-1-picrylhydrazyl (DPPH^•) and 78.2 ± 4.1% determined by 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS™) assays. The total polyphenolic content of the extracts was 1642 ± 32 mg gallic acid equivalent (GAE) L⁻¹. After this, these extracts were reacted with an aqueous solution of AgNO₃ resulting in AgNPs, which were characterized by UV−VIS spectroscopy, FT-IR, scanning electron microscopy (SEM-EDX), and dynamic light scattering (DLS). The results demonstrated obtaining spherical, stable AgNPs with a diameter of less than 69 nm and an absorbance peak at 435 nm. The mixture of extracts and AgNPs showed a superior antioxidant capacity of 2.3 ± 0.4% inhibition determined by the DPPH^• assay, 88.5 ± 0.9% inhibition as determined by the ABTS^•+ assay, and a good antibacterial activity against several human pathogens: Escherichia coli, Klebsiella pneumoniae, Pseudomonas fluorescens, and Staphylococcus aureus.     

Cannabioxepane, a novel tetracyclic cannabinoid from hemp, Cannabis sativa L.

Apart from large amounts of cannabidiol, the known stilbenoids 1-4 and the oxylipins 7 and 8, a fibre cultivar of Cannabis sativa derived from the historical Carmagnola variety gave the novel spiranic stilbenoid isocannabispiradienone (5) and the biphenyl-type cannabinoid cannabioxepane (CBX, 6), a tetracyclic compound characterized by an unprecedented C-5/C-8′ oxygen bridge and devoid of cannabinoid activity. Structures were established by analysis of MS and NMR data, and the biogenetic derivation of the new compounds is discussed.     

Influence of Harvest Time on the Chemical Profile of Pereskia aculeate Mill. Using Paper Spray Mass Spectrometry

This study evaluated the physicochemical characteristics and the production of bioactive compounds of Pereskia aculeata Mill. at different harvest times. Here, we performed a qualitative evaluation of the chemical profile by paper spray mass spectrometry (PSMS), the phenolic acid and flavonoid profile by high-performance liquid chromatography (HPLC), antioxidant activity, total carotenoids, total phenolic compounds, total flavonoids, total anthocyanins, color characteristics, total soluble solids (TSS), total solids (TS), pH, and total titratable acidity (TTA). The chemical profile was not affected, with the exception of 4,5-dimethyl-2,6-octadiene and azelaic acid, which was only identified in the leaves harvested during the winter. The content of four phenolic acids and three flavonoids were analyzed; out of these, no significant amounts of ellagic acid and quercetin were detected. There was no difference in production of bioactive compounds between seasons, reflecting the antioxidant activity, which also did not differ. Brightness, chroma, and leaf pH were the only physicochemical characteristics that did not vary between seasons.     

Simultaneous determination of terpenes and cannabidiol in hemp (Cannabis sativa L.) by fast gas chromatography with flame ionization detection

Hemp (Cannabis sativa L.) has become widely used in several sectors due to the presence of various bioactive compounds such as terpenes and cannabidiol. In general, terpenes and cannabidiol content is determined separately, which is time consuming. Thus, a fast gas chromatography with flame ionization detection method was validated for simultaneous determination of both terpenes and cannabidiol in hemp. The method enabled a rapid detection of 29 different terpenes and cannabidiol within a total analysis time of 16 min, with satisfactory sensitivity (limit of detection = 0.03–0.27 µg/mL, limit of quantitation = 0.10–0.89 µg/mL). The inter‐ and intraday precision (RSD) was <7.82 and <3.59%, respectively. Recoveries at two spiked concentration levels (low, 3.15 µg/mL; high, 20.0 µg/mL) were determined on both apical leaves (78.55–101.52%) and inflorescences (77.52–107.10%). The reproducibility (RSD) was <5.94 and <5.51% in apical leaves and inflorescences, respectively. The proposed and validated method is highly sensitive, robust, fast, and accurate for determination of the main terpenes and cannabidiol in hemp and could be routinely used for quality control.     

Composition of non-woody plant lignins and cinnamic acids by Py-GC/MS,Py/TMAH and FT-IR

Lignins from different non-woody plants such as hemp (Cannabis sativa), flax (Linum usitatissimum), jute (Corchorus capsularis), sisal (Agave sisalana) and abaca (Musa textilis), commonly used for manufacturing specialty papers, were analyzed by pyrolysis-gas chromatography–mass spectrometry (Py-GC/MS) in the absence and in the presence of tetramethylammonium hydroxide (TMAH) and by Fourier-transform infrared (FTIR) spectroscopy, after alkaline isolation. Hemp and flax lignins showed a predominance of guaiacyl (1-hydroxy-2-methoxyphenyl) units, while jute, sisal and abaca lignins contained predominantly syringyl (1-hydroxy-2,6-dimethoxyphenyl) units. p-Hydroxycinnamic acids, namely p-coumaric and ferulic acids, were also found in the isolated lignins, linked by alkali-resistant ether bonds, especially in abaca and sisal lignins. The presence of the latter compounds in the isolated lignins, as well as in their respective whole fibers, was shown by pyrolysis in the presence of tetramethylammonium hydroxide (Py/TMAH), p-coumaric acid being especially abundant in abaca.