6‐(3,4‐Di­fluoro­benzoyl)‐3‐[2‐(4‐pyridyl)­ethyl]‐1,3‐benzo­thia­zol‐2(3H)‐one

A new type of benzo­thia­zolinone derivative with potential pharmacological activity, viz. 6‐(3,4‐di­fluoro­benzoyl)‐3‐[2‐(4‐pyridyl)­ethyl]‐1,3‐benzo­thia­zol‐2(3H)‐one, C₂₁H₁₄F₂N₂O₂S, has been prepared and studied by NMR, IR and single‐crystal X‐ray diffraction techniques. The mol­ecule is not planar, the pyridine and di­fluoro­benzene moieties being located above and below the benzo­thia­zole ring system. The carbonyl O atoms are involved in an intramolecular hydrogen‐bond‐type interaction.     

N‐(3H‐Thia­zol‐2‐yl­idene)­nitr­amine and N‐methyl‐N‐(thia­zol‐2‐yl)­nitr­amine

The geometries of the thia­zole ring and the nitr­amino groups in N‐(3H‐thia­zol‐2‐yl­idene)­nitr­amine, C₃H₃N₃O₂S, (I), and N‐­methyl‐N‐(thia­zol‐2‐yl)­nitr­amine, C₄H₅N₃O₂S, (II), are very similar. The nitr­amine group in (II) is planar and twisted along the C—N bond with respect to the thia­zole ring. In both structures, the asymmetric unit includes two practically equal mol­ecules. In (I), the mol­ecules are arranged in layers connected to each other by N—H⋯N and much weaker C—H⋯O hydrogen bonds. In the crystal structure of (II), the mol­ecules are arranged in layers bound to each other by both weak C—H⋯O hydrogen bonds and S⋯O dipolar interactions.     

4‐Methyl‐2‐[N‐(3,4‐methyl­ene­dioxy­benzyl­idene)hydrazino]­thia­zole and its reduction product, 4‐methyl‐2‐[N‐(3,4‐methyl­ene­dioxybenzyl­idene)hydrazono]‐4,5‐di­hydro­thia­zole

The crystal structures of 4‐methyl‐2‐[N‐(3,4‐methyl­ene­dioxybenzyl­idene)hydrazino]­thia­zole, C₁₂H₁₁N₃O₂S, and its reduction product 4‐methyl‐2‐[N‐(3,4‐methyl­ene­dioxybenzyl­idene)hydrazono]‐4,5‐di­hydro­thia­zole, C₁₂H₁₃N₃O₂S, have been determined and compared. In the reduction product, the tautomer observed bears an H atom on the exocyclic N atom. Both compounds form hydrogen‐bonded dimers over centers of inversion.     

2‐[2‐Methyl‐5‐nitro‐4‐(phenyl­sulfonyl­methyl)­imidazol‐1‐yl]­ethanol and 2‐methyl‐5‐nitro‐4‐phenyl­sulfonyl­methyl‐1,3‐thia­zole

The title compounds, C₁₃H₁₅N₃O₅S and C₁₁H₁₀N₂O₄S₂, respectively, both contain a phenyl­sulfonyl group connected, through a methyl­ene bridge, to either a substituted nitro­imidazole or nitro‐1,3‐thia­zole ring. In the imidazole‐containing mol­ecule, the nitro and sulfonyl groups are trans relative to the sulfonyl–methyl bond, while in the thia­zole‐containing mol­ecule, these substituents are cis. The stabilizing interactions within the crystals are also different between the two compounds.     

Ethyl 2‐[N‐(tert‐butyl­oxy­carbonyl)‐l‐alanyl­amino]‐4‐methyl‐1,3‐thia­zole‐5‐carboxyl­ate reveals a trans orientation of the preceding amide N—H with respect to the thia­zole‐ring sulfur

The title mol­ecule, C₁₅H₂₃N₃O₅S, was prepared as a synthetic precursor to 4‐methyl­thia­zole‐based DNA minor groove binders which would bear chiral amino acids in the sequence. The crystallographic evidence presented herein shows that the aromatic amide NH group preceding the thia­zole ring points away from the direction of sulfur. The mol­ecule is biplanar, with the dihedral angle between the N‐terminus peptide moiety and the thia­zole‐containing plane being 49.7 (5)°, with a bend at the Cα carbon.     

2,3‐Dihydro‐3‐methyl‐2‐nitrimino‐1,3‐thiazole

The title compound {alternatively, 3‐methyl‐2‐[oxido(oxo)hydrazono]‐2,3‐dihydro‐1,3‐thiazole}, C₄H₅N₃O₂S, was obtained by methyl­ation of N‐(2‐thia­zolyl)­nitr­amine. The molecule lies on a mirror plane and the thia­zole ring is planar, regular in shape and aromatic. The S atom participates in the aromatic sextet via an electron pair on the 3p_z orbital. In the crystal, the mol­ecules are arranged in parallel layers, bound to each other by weak C—H?O and C—H?N hydrogen bonds and by S?O dipolar interactions, with an interlayer separation of 3.23 Å.     

Dichloro(2,2′‐diamino‐4,4′‐bi‐1,3‐thiazole‐N3,N3′)copper(II)

The title complex, [CuCl₂(C₆H₆N₄S₂)], has a flattened tetrahedral coordination. The Cu^II atom is located on a twofold rotation axis and is coordinated by two N atoms from a chelating 2,2′‐di­amino‐4,4′‐bi‐1,3‐thia­zole ligand and by two Cl atoms. Intramolecular hydrogen bonding exists between the amino groups of the 2,2′‐di­amino‐4,4′‐bi‐1,3‐thia­zole ligand and the Cl atoms. The intermolecular separation of 3.425 (1) Å between parallel bi­thia­zole rings suggests there is a π–π interaction between them.     

(E)‐2‐[2‐(1‐Naphthyl)­vinyl]‐3‐tosyl‐2,3‐di­hydro‐1,3‐benzo­thia­zole

The title compound, C₂₆H₂₁NO₂S₂, which consists of a benzo­thia­zole skeleton with α‐naphthyl­vinyl and tosyl groups at positions 2 and 3, respectively, was prepared by palladium–copper‐catalyzed heteroannulation. The E configuration of the mol­ecule about the vinyl C=C bond is established by the benzothiazole–naphthyl C—C—C—C torsion angle of 177.5 (4)°. The five‐membered heterocyclic ring adopts an envelope conformation with the Csp³ atom 0.380 (6) Å from the C₂NS plane. The two S—C [1.751 (4) and 1.838 (4) Å] and two N—C [1.426 (5) and 1.482 (5) Å] bond lengths in the thia­zole ring differ significantly.     

2,2′‐(1,2‐Ethanediyldithio)bis(1,3‐benzothiazole)

In the title compound, C₁₆H₁₂N₂S₄, which is the result of the S‐alkyl­ation reaction of 2‐mercapto­benzo­thia­zole with ethyl­ene dibromide, the planes of the two benzo­thia­zole moieties form a dihedral angle of 3.84 (14)°. The bridging chain moiety, –SCH₂CH₂S–, adopts an antiperiplanar conformation. There are intermolecular S⃛S non‐bonded contacts of 3.6471 (9) Å, which stabilize the crystal packing.     

2‐Amino‐5‐nitro­thia­zole monoethanol solvate: triply‐interwoven hydrogen‐bonded sheets containing centrosymmetric R(8) and R(38) rings

2‐Amino‐5‐nitro­thia­zole crystallizes from solution in ethanol as a monosolvate, C₃H₃N₃O₂S·C₂H₆O, in which the thia­zole component has a strongly polarized molecular–electronic structure. The thia­zole mol­ecules are linked into centrosymmetric dimers by paired N—H⋯N hydrogen bonds [H⋯N = 2.09 Å, N⋯N = 2.960 (6) Å and N—H⋯N = 169°], and these dimers are linked by the ethanol mol­ecules, via a two‐centred N—H⋯O hydrogen bond [H⋯O = 1.98 Å, N⋯O = 2.838 (5) Å and N—H⋯O = 164°] and a planar asymmetric three‐centred O—H⋯(O)₂ hydrogen bond [H⋯O = 2.07 and 2.53 Å, O⋯O = 2.900 (5) and 3.188 (5) Å, O—H⋯O = 169 and 136°, and O⋯H⋯O = 55°], into sheets built from alternating (8) and (38) rings. These sheets are triply interwoven.     

Dimorphism in (2Z)‐2‐benzyl­idene‐N,7‐dimethyl‐3‐oxo‐5‐phenyl‐2,3‐dihydro‐5H‐1,3‐thia­zolo[3,2‐a]pyrimidine‐6‐carboxamide

The title compound, C₂₂H₁₉N₃O₂S, crystallizes in two polymorphic forms having the same space group, viz. P, with Z′ = 2 and Z′ = 1. In both polymorphs, the planar thia­zole ring is fused cis with the dihydro­pyrimidine ring, the carbamoyl group is in an extended conformation with an anti­clinal orientation with respect to the pyrimidine ring, and the phenyl ring is attached to the pyrimidine ring approximately at a right angle. The two polymorphs have different inter­planar angles between the phenyl and thia­zole rings. The mol­ecules are linked by N—H⋯O and C—H⋯O hydrogen bonds.     

6‐(2‐Fluorobenzylidene)‐2‐[1‐(2‐fluoro‐4‐biphenyl)ethyl]thiazolo[3,2‐b][1,2,4]triazol‐5(6H)‐one

The title compound, C₂₅H₁₇F₂N₃OS, was synthesized from 6‐(benzyl­idene)­thia­zolo­[3,2‐b][1,2,4]triazol‐5(6H)‐one. The fused thia­zolo­[3,2‐b][1,2,4]triazole system is essentially planar, and bifurcated C—H⋯O, C—H⋯N and C—H⋯F interactions are present between mol­ecules.     

4‐(4‐Bromo­phenyl)‐2‐methyl‐1,3‐thia­zole

In the structure of the title compound, C₁₀H₈BrNS, the dihedral angles between the planes of the thia­zole and aryl rings, viz. 4.2 (6) and 7.5 (6)° for the two independent mol­ecules, are consistent with insignificant molecular perturbation by the weak intermolecular contacts. The mol­ecules are close to being related by a non‐crystallographic inversion centre, with C—H⃛π and π–π intermolecular interactions observed.     

2‐Amino­thia­zole and 2‐amino­thiazolinone derivatives

The reaction of different substituted α‐cyano­oxiranes with thio­urea resulted in the formation of the 2‐amino­thia­zolinone derivative 2‐amino‐5‐(2,5‐di­methoxy­phenyl)‐1,3‐thia­zol‐4(5H)‐one, C₁₁H₁₂N₂O₃S, (I), and the 2‐amino­thia­zole derivative ethyl 2‐amino‐5‐(2,5‐di­methoxy­phenyl)‐1,3‐thia­zole‐4‐carboxyl­ate, C₁₄H₁₆N₂O₄S, (II). The geometries of the two crystallographically independent mol­ecules in (II) are nearly identical but mirror related. The crystal structures of both compounds contain two types of intermolecular hydrogen bonds.     

[5‐Benzyl‐3‐phenyl‐2‐(2‐pyridyl‐κN)thiazolidin‐4‐one‐κS]dichloropalladium(II)

The palladium(II) centre in the title compound, [PdCl₂(C₂₁H₁₈N₂OS)], is coordinated to the pyridyl N atom and to the thia­zolidinone S atom of the 5‐benzyl‐3‐phenyl‐2‐(2‐pyridyl)­thia­zolidin‐4‐one ligand, resulting in a five‐membered chelate ring. Two cis‐chloro ligands complete the square‐planar coordination environment of the metal. Although the geometry at the Pd centre is essentially planar, the N—Pd—S bite angle of 85.20 (8)° causes deviations in the cis angles from the ideal value of 90°. Opposite enantiomers form one‐dimensional chains in the cell via a short S?O intermolecular interaction.     

Ethyl 2‐amino‐4‐phenyl‐1,3‐thia­zole‐5‐carboxyl­ate

The structure of the title compound, C₁₂H₁₂N₂O₂S, (I), comprises mol­ecules that form dimers via N—H?N hydrogen‐bonding interactions and then construct the overall network through N—H?O associations. The dihedral angle between the phenyl and thia­zole rings is 42.41 (6)°.     

1,3‐Benzothia­zole‐6‐carboxamidinium chloride dihydrate

The title compound, C₈H₈N₃S⁺·Cl⁻·2H₂O, has been synthesized and characterized both spectroscopically and structurally. The structure consists of 1,3‐benzothia­zole‐6‐carboxamidinium cations, chloride anions and water mol­ecules, all interconnected by hydrogen bonds into a three‐dimensional network. The 1,3‐benzo­thia­zole moiety is inclined to the 6‐­amidine group by 36.71 (9)°.     

Di­aqua­(2,2′‐di­amino‐4,4′‐bi‐1,3‐thia­zole)­oxo­sulfato­vanadium(IV) tetrahydrate

The title compound, [VO(SO₄)(C₆H₆N₄S₂)(H₂O)₂]·4H₂O, displays a distorted octahedral coordination geometry. The 2,2′‐di­amino‐4,4′‐bi­thia­zole ligand is present in the usual chelating bidentate mode. The sulfate ligand coordinates in a monodentate fashion to the V atom. A large displacement of the V atom from the equatorial plane towards the oxo group correlates with the strong V=O double bond. In the crystal structure, a three‐dimensional supramolecular network is formed by hydrogen bonds.     

Tetrakis(μ‐benzothiazole‐2‐thiolato)‐1:2κ4N:S2;1:2κ4S2:N‐dichloro‐1κCl,2κCl‐dirhenium(III)(Re—Re) dichloromethane solvate: a bridged complex with a long Re—Re quadruple bond

The title compound, [Re₂(C₇H₄NS₂)₄Cl₂]·CH₂Cl₂, consists of dirhenium mol­ecules with bridging N,S‐benzo­thia­zole‐2‐thiol­ate ligands, axial Cl^? ligands and intramolecular hydrogen bonding. These mol­ecules adopt somewhat staggered conformations, with a long Re—Re quadruple bond distance of 2.2716 (3) Å.     

Bis(acesulfamato‐κ2O4,N)bis­(3‐methyl­pyridine)copper(II)

In the crystal structure of the title compound {systematic name: bis­[6‐methyl‐1,2,3‐oxa­thia­zin‐4(3H)‐one 2,2‐dioxide(1−)‐κ²N³,O⁴]bis­(3‐meth­yl­pyridine)copper(II)}, [Cu(C₄H₄NO₄S)₂(C₆H₇N)₂], the Cu^II centre resides on a centre of symmetry and has an octa­hedral geometry that is distorted both by the presence of four‐membered chelate rings and because of the Jahn–Teller effect. The equatorial plane is formed by the N atoms of two methyl­pyridine ligands and by the more basic O atoms of the acesulfamate ligands, while the weakly basic N atoms of these ligands are in elongated axial positions with a misdirected valence. The crystal is stabilized by two inter­molecular C—H⋯O inter­actions involving the methyl and CH groups, and the sulfonyl O atoms of the acesulfamate group.