“Anti-electrostatic” halogen bonding in solution

Halogen-bonded (XB) complexes between halide anions and a cyclopropenylium-based anionic XB donor were characterized in solution for the first time. Spontaneous formation of such complexes confirms that halogen bonding is sufficiently strong to overcome electrostatic repulsion between two anions. The formation constants of such “anti-electrostatic” associations are comparable to those formed by halides with neutral halogenated electrophiles. However, while the latter usually show charge-transfer absorption bands, the UV-Vis spectra of the anion–anion complexes examined herein are determined by the electronic excitations within the XB donor. The identification of XB anion–anion complexes substantially extends the range of the feasible XB systems, and it provides vital information for the discussion of the nature of this interaction.

Spontaneous formation of “anti-electrostatic” complexes in solution demonstrates that halogen bonding can be sufficiently strong to overcome anion–anion repulsion when the latter is attenuated by the polar medium.

Halogen bonding (XB) is an attractive interaction between a Lewis base (LB) and a halogenated compound, exhibiting an electrophilic region on the halogen atom.¹ It is most commonly related to electrostatic interaction between an electron-rich species (XB acceptor) and an area of positive electrostatic potential (σ-holes) on the surface of the halogen substituent in the electrophilic molecule (XB donor).² Provided that mutual polarization of the interacting species is taken into account, the σ-hole model explains geometric features and the variation of stabilities of XB associations, especially in the series of relatively weak complexes.³ Based on the definition of halogen bonding and its electrostatic interpretation, this interaction is expected to involve either cationic or neutral XB donors. Electrostatic interaction of anionic halogenated species with electron-rich XB acceptors, however, seems to be repulsive, especially if the latter are also anionic. Yet, computational analyses predicted that halogen bonding between ions of like charges, called “anti-electrostatic” halogen bonding (AEXB),⁴ can possibly be formed^5–12 and the first examples of AEXB complexes formed by different anions, i.e. halide anions and the anionic iodinated bis(dicyanomethylene)cyclopropanide derivatives 1 (see Scheme 1) or the anionic tetraiodo-p-benzoquinone radical, were characterized recently in the solid state.^13,14 The identification of such complexes substantially extends the range of feasible XB systems, and it provides vital information for the discussion of the nature of this interaction. Computational results, however, significantly depend on the used methods and applied media (gas phase vs. polar environment and solvation models) and the solid state arrangements of the XB species might be affected by crystal forces and/or counterions. Unambiguous confirmation of the stability of the halogen-bonded anion–anion complexes and verification of their thermodynamic characteristics thus requires experimental characterization of the spontaneous formation of such associations in solution. Still, while the solution-phase complexes formed by hydrogen bonding between two anionic species were reported previously,^15–17 there is currently no example of “anti-electrostatic” XB in solution.Open in a separate windowScheme 1Structures of the XB donor 1 and its hydrogen-substituted analogue 2.To examine halogen bonding between two anions in solution, we turn to the interaction between halides and 1,2-bis(dicyanomethylene)-3-iodo-cyclopropanide 1 (Scheme 1).^‡ Even though this compound features a cationic cyclopropenylium core, it is overall anionic, and calculations have demonstrated that its electrostatic potential is universally negative across its entire surface.¹³ The solution of 1 (with tris(dimethylamino)cyclopropenium (TDA) as counterion) in acetonitrile is characterized by an absorption band at 288 nm with ε = 2.3 × 10⁴ M⁻¹ cm⁻¹ (Fig. 1). As LB, we first applied iodide anions taken as a salt with n-tetrabutylammonium counter-ion, Bu₄NI. This salt does not show absorption bands above 290 nm, but its addition to a solution of 1 led to a rise of absorption in the 290–350 nm range (Fig. 1). Subtraction of the absorption of the individual components from that of their mixture produced a differential spectrum which shows a maximum at about 301 nm (insert in Fig. 1). At constant concentration of the XB donor (1) and constant ionic strength, the intensity of the absorption in the range of 280–300 nm (and hence differential absorbance, ΔAbs) rises with increasing iodide concentration (Fig. S1 in the ESI^†). This suggests that the interaction of iodide with 1 results in the formation of the [1, I⁻]-complex which shows a higher absorptivity in this spectral range (eqn (1)):1 + X⁻ ⇌ [1, X⁻]1Open in a separate windowFig. 1Spectra of acetonitrile solutions with constant concentration of 1 (0.60 mM) and various concentrations of Bu₄NI (6.0, 13, 32, 49, 75, 115 and 250 mM, solid lines from the bottom to the top). The dashed lines show spectra of the individual solutions 1 (c = 0.60 mM, red line) and Bu₄NI (c = 250 mM, blue line). The ionic strength was maintained using Bu₄NPF₆. Insert: Differential spectra of the solutions obtained by subtraction of the absorption of the individual components from the spectra of their corresponding mixtures.To clarify the mode of interaction between 1 and iodide in the complex, we also performed analogous measurements with the hydrogen-substituted compound 2 (see Scheme 1). The addition of iodide to a solution of 2 in acetonitrile did not increase the absorption in the 280–300 nm spectral range. Instead, some decrease of the absorption band intensity of 2 with the increase of concentration of I⁻ anions was observed (Fig. S2 in the ESI^†). Such changes are related to a blue shift of this band resulting from the hydrogen bonding between 2 and iodide (formation of hydrogen-bonded [2, I⁻] complex is corroborated by the observation of the small shift of the NMR signal of the proton of 2 to the higher ppm values in the presence of I⁻ anions, see Fig. S3 in the ESI^†).^§ Furthermore, since H-compound 2 should be at least as suitable as XB donor 1 to form anion–π complexes with the halide, this finding (as well as solid-state and computational data^¶) rules out that any increase in absorption in this region observed with the I-compound 1 may be due to this alternative interaction.Likewise, the addition of NBu₄I to a solution of TDA cations taken as a salt with Cl⁻ anions did not result in an increase in the relevant region. Hence, we could also rule out anion–π interactions with the TDA counter-ions as source of the observed changes, which is in line with previous reports on the electron-rich nature of TDA.¹⁸All these observations (supported by the computational analysis, vide infra) indicate that the [1, I⁻] complex (eqn (1)) is formed via halogen bonding of I⁻ with iodine substituents in 1. The changes in the intensities of the differential absorption ΔAbs as a function of the iodide concentration (with constant concentration of XB donor (1) as well as constant ionic strength) are well-modelled by the 1 : 1 binding isotherm (Fig. S1 in the ESI^†). The fit of the absorption data produced a formation constant of K = 15 M⁻¹ for the [1, I⁻] complex (Table 1).^|| The overlap with the absorption of the individual XB donor hindered the accurate evaluation of the position and intensity of the absorption band of the corresponding complex which is formed upon LB-addition to 1. As such, the values of Δλ_max shown in Table 1 represent a wavelength of the largest difference in the absorptivity of the [1, I⁻] complex and individual anion 1, and Δε reflects the difference of their absorptivity at this point (see the ESI^† for the details of calculations).Equilibrium constants and spectral characteristics of the complexes of 1 with halide anions X⁻

Bifunctional activation of amine-boranes by the W/Pd bimetallic analogs of “frustrated Lewis pairs”

The reaction between basic [(PCP)Pd(H)] (PCP = 2,6-(CH₂P(t-C₄H₉)₂)₂C₆H₄) and acidic [LWH(CO)₃] (L = Cp (1a), Tp (1b); Cp = η⁵-cyclopentadienyl, Tp = κ³-hydridotris(pyrazolyl)borate) leads to the formation of bimolecular complexes [LW(CO)₂(μ-CO)⋯Pd(PCP)] (4a, 4b), which catalyze amine-borane (Me₂NHBH₃, ^tBuNH₂BH₃) dehydrogenation. The combination of variable-temperature (¹H, ³¹P{¹H}, ¹¹B NMR and IR) spectroscopies and computational (ωB97XD/def2-TZVP) studies reveal the formation of an η¹-borane complex [(PCP)Pd(Me₂NHBH₃)]⁺[LW(CO₃)]⁻ (5) in the first step, where a BH bond strongly binds palladium and an amine group is hydrogen-bonded to tungsten. The subsequent intracomplex proton transfer is the rate-determining step, followed by an almost barrierless hydride transfer. Bimetallic species 4 are easily regenerated through hydrogen evolution in the reaction between two hydrides.

Bimetallic complexes [LW(CO)₂(μ-CO)⋯Pd(PCP)] cooperatively activate amine-boranes for their dehydrogenation via N–H proton tunneling at RDS and H₂ evolution from two neutral hydrides.     

Characterization and reactivity study of non-heme high-valent iron–hydroxo complexes

A terminal Fe^IIIOH complex, [Fe^III(L)(OH)]²⁻ (1), has been synthesized and structurally characterized (H₄L = 1,2-bis(2-hydroxy-2-methylpropanamido)benzene). The oxidation reaction of 1 with one equiv. of tris(4-bromophenyl)ammoniumyl hexachloroantimonate (TBAH) or ceric ammonium nitrate (CAN) in acetonitrile at −45 °C results in the formation of a Fe^IIIOH ligand radical complex, [Fe^III(L˙)(OH)]⁻ (2), which is hereby characterized by UV-visible, ¹H nuclear magnetic resonance, electron paramagnetic resonance, and X-ray absorption spectroscopy techniques. The reaction of 2 with a triphenylcarbon radical further gives triphenylmethanol and mimics the so-called oxygen rebound step of Cpd II of cytochrome P450. Furthermore, the reaction of 2 was explored with different 4-substituted-2,6-di-tert-butylphenols. Based on kinetic analysis, a hydrogen atom transfer (HAT) mechanism has been established. A pK_a value of 19.3 and a BDFE value of 78.2 kcal/mol have been estimated for complex 2.

One-electron oxidation of an Fe^III–OH complex (1) results in the formation of a Fe^III–OH ligand radical complex (2). Its reaction with (C₆H₅)₃C˙ results in the formation of (C₆H₅)₃COH, which is a functional mimic of compound II of cytochrome P450.     

Metal–metal bonded alkaline-earth distannyls

The first families of alkaline-earth stannylides [Ae(SnPh₃)₂·(thf)_x] (Ae = Ca, x = 3, 1; Sr, x = 3, 2; Ba, x = 4, 3) and [Ae{Sn(SiMe₃)₃}₂·(thf)_x] (Ae = Ca, x = 4, 4; Sr, x = 4, 5; Ba, x = 4, 6), where Ae is a large alkaline earth with direct Ae–Sn bonds, are presented. All complexes have been characterised by high-resolution solution NMR spectroscopy, including ¹¹⁹Sn NMR, and by X-ray diffraction crystallography. The molecular structures of [Ca(SnPh₃)₂·(thf)₄] (1′), [Sr(SnPh₃)₂·(thf)₄] (2′), [Ba(SnPh₃)₂·(thf)₅] (3′), 4, 5 and [Ba{Sn(SiMe₃)₃}₂·(thf)₅] (6′), most of which crystallised as higher thf solvates than their parents 1–6, were established by XRD analysis; the experimentally determined Sn–Ae–Sn′ angles lie in the range 158.10(3)–179.33(4)°. In a given series, the ¹¹⁹Sn NMR chemical shifts are slightly deshielded upon descending group 2 from Ca to Ba, while the silyl-substituted stannyls are much more shielded than the phenyl ones (δ¹¹⁹Sn/ppm: 1′, −133.4; 2′, −123.6; 3′, −95.5; 4, −856.8; 5, −848.2; 6′, −792.7). The bonding and electronic properties of these complexes were also analysed by DFT calculations. The combined spectroscopic, crystallographic and computational analysis of these complexes provide some insight into the main features of these unique families of homoleptic complexes. A comprehensive DFT study (Wiberg bond index, QTAIM and energy decomposition analysis) points at a primarily ionic Ae–Sn bonding, with a small covalent contribution, in these series of complexes; the Sn–Ae–Sn′ angle is associated with a flat energy potential surface around its minimum, consistent with the broad range of values determined by experimental and computational methods.

The complete series of heterobimetallic alkaline-earth distannyls [Ae{SnR₃}₂·(thf)_x] (Ae = Ca, Sr, Ba) have been prepared for R = Ph and SiMe₃, and their bonding and electronic properties have been comprehensively investigated.     

Nitric oxide monooxygenation (NOM) reaction of cobalt-nitrosyl {Co(NO)}8 to CoII-nitrito {CoII(NO2−)}: base induced hydrogen gas (H2) evolution

Here, we report the nitric oxide monooxygenation (NOM) reactions of a Co^III-nitrosyl complex (1, {Co-NO}⁸) in the presence of mono-oxygen reactive species, i.e., a base (OH⁻, tetrabutylammonium hydroxide (TBAOH) or NaOH/15-crown-5), an oxide (O²⁻ or Na₂O/15-crown-5) and water (H₂O). The reaction of 1 with OH⁻ produces a Co^II-nitrito complex {3, (Co^II-NO₂⁻)} and hydrogen gas (H₂), via the formation of a putative N-bound Co-nitrous acid intermediate (2, {Co-NOOH}⁺). The homolytic cleavage of the O–H bond of proposed [Co-NOOH]⁺ releases H₂via a presumed Co^III-H intermediate. In another reaction, 1 generates Co^II-NO₂⁻ when reacted with O²⁻via an expected Co^I-nitro (4) intermediate. However, complex 1 is found to be unreactive towards H₂O. Mechanistic investigations using ¹⁵N-labeled-¹⁵NO and ²H-labeled-NaO²H (NaOD) evidently revealed that the N-atom in Co^II-NO₂⁻ and the H-atom in H₂ gas are derived from the nitrosyl ligand and OH⁻ moiety, respectively.

Base-induced hydrogen (H₂) gas evolution in the nitric oxide monoxygenation reaction.

As a radical species, nitric oxide (NO) has attracted great interest from the scientific community due to its major role in various physiological processes such as neurotransmission, vascular regulation, platelet disaggregation and immune responses to multiple infections.¹ Nitric oxide synthase (NOS),² and nitrite reductase (NiR)³ enzymes are involved in the biosynthesis of NO. NOSs produce NO by the oxidation of the guanidine nitrogen in l-arginine.⁴ However, in mammals and bacteria, NO₂⁻ is reduced to NO by NiRs in the presence of protons, i.e., NO₂⁻ + e⁻ + 2H⁺ → NO + H₂O.⁵ Biological dysfunctions may cause overproduction of NO, and being radical it leads to the generation of reactive nitrogen species (RNS), i.e., peroxynitrite (PN, OONO⁻)⁶ and nitrogen dioxide (˙NO₂),⁷ upon reaction with reactive oxygen species (ROS) such as superoxide (O₂˙⁻),⁸ peroxide (H₂O₂),⁹ and dioxygen (O₂).¹⁰ Hence, it is essential to maintain an optimal level of NO. In this regard, nitric oxide dioxygenases (NODs)¹¹ are available in bio-systems to convert excess NO to biologically benign nitrate (NO₃⁻).¹²NO₂⁻ + Fe^II + H⁺ ↔ NO + Fe^III + OH⁻1[M–NO]ⁿ + 2OH⁻ → [M–NO₂]⁽ⁿ⁻²⁾ + H₂O2NOD enzymes generate NO₃⁻ from NO;^11b,12−13 however, the formation of NO₂⁻ from NO is still under investigation. Clarkson and Bosolo reported NO₂⁻ formation in the reaction of Co^III-NO and O₂.¹⁴ Nam and co-workers showed the generation of Co^II-NO₂⁻ from Co^III-NO upon reaction with O₂˙⁻.¹⁵ Recently, Mondal and co-workers reported NO₂⁻ formation in the reaction of Co^II-NO with O₂.¹⁶ Apart from cobalt, the formation of Cu^II-NO₂⁻ was also observed in the reaction of Cu^I-NO and O₂.¹⁷ For metal-dioxygen adducts, i.e., Cr^III-O₂˙⁻ and Mn^IV-O₂²⁻, NOD reactions led to the generation of Cr^III-NO₂⁻ (ref. 18) and Mn^V O + NO₂⁻,¹⁹ respectively. However, the NOD reaction of Fe^III-O₂˙⁻ and Fe^III-O₂²⁻ with NO and NO⁺, respectively, generated Fe^III-NO₃⁻via Fe^IV O and ˙NO₂.²⁰ Ford suggested that the reaction of ferric-heme nitrosyl with hydroxide leads to the formation of NO₂⁻ and H⁺.¹² Lehnert and co-workers reported heme-based Fe-nitrosyl complexes²¹ showing different chemistries due to the Fe^II-NO⁺ type electronic structures. On the other hand, Bryan proposed that the one-electron reduction of NO₂⁻ to NO in ferrous heme protein is reversible (eqn (1)).²² Also, it is proposed that excess NO in biological systems is converted to NO₂⁻ and produces one equivalent of H⁺ upon reaction with ˙OH.²³ Previously reported reactivity of M–NOs of Fe²⁴ with OH⁻ suggested the formation of NO₂⁻ and one equivalent of H⁺, where H⁺ further reacts with one equivalent of OH⁻ and produces H₂O (eqn (2)).²⁵Here in this report, we explore the mechanistic aspects of nitric oxide monooxygenation (NOM) reactions of the Co^III-nitrosyl complex, [(12TMC)Co^III(NO⁻)]²⁺/{Co(NO)}⁸ (1),^15,26 bearing the 12TMC ligand (12TMC = 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane) with mono-oxygen reactive species (O²⁻, OH⁻ and H₂O) (Scheme 1). Complex 1 reacts with the base (OH⁻, tetrabutylammonium hydroxide (TBAOH)/or NaOH in the presence of 15-crown-5 as the OH⁻ source) and generates the corresponding Co^II-nitrito complex, [(12TMC)Co^II(NO₂⁻)]⁺ (3), with the evolution of hydrogen gas (H₂) via the formation of a plausible N-bound Co-nitrous acid intermediate ([Co-NOOH]⁺, 2) in CH₃CN at 273 K (Scheme 1, reaction (I)). Also, when 1 reacts with the oxide (O²⁻ or Na₂O in the presence of 15-crown-5), it generates the Co^II-nitrito complex (3) via a probable Co^I-nitro, [(12TMC)Co^I(NO₂⁻)] (4), intermediate (Scheme 1, reaction (II)); however, 1 does not react with water (Scheme 1, reaction (III)). Mechanistic investigations using ¹⁵N-labeled-¹⁵NO, D-labeled-NaOD and ¹⁸O-labelled-¹⁸OH⁻ demonstrated, unambiguously, that the N and O-atoms in the NO₂⁻ ligand of 3 resulted from NO and OH⁻ moieties; however, the H-atoms of H₂ are derived from OH⁻. To the extent of our knowledge, the present work reports the very first systematic study of Co^III-nitrosyl complex reactions with H₂O, OH⁻ and O²⁻. This new finding presents an alternative route for NO₂⁻ generation in biosystems, and also illustrates a new pathway of H₂ evolution, in addition to the reported literature.^12,27Open in a separate windowScheme 1Nitric oxide monooxygenation (NOM) reactions of cobalt-nitrosyl complex (1) in the presence of a base (OH⁻), sodium oxide (Na₂O) and water (H₂O).To further explore the chemistry of [(12TMC)Co^III(NO⁻)]²⁺ (1),^15,26 and the mechanistic insights of NOM reactions, we have reacted it with a base (OH⁻), an oxide (O²⁻), and water (H₂O). When complex 1 was reacted with TBAOH in CH₃CN, the color of complex 1 changed to light pink from dark pink. In this reaction, the characteristic absorption band of 1 (370 nm) disappears within 2 minutes (Fig. 1a; ESI, Experimental section (ES) and Fig. S1a^†), producing a Co^II-nitrito complex, [(12TMC)Co^II(NO₂⁻)]⁺ (3), with H₂ (Scheme 1, reaction (Ib)), in contrast to the previous reports on base induced NOM reactions (eqn (2)).^12,25,28 The spectral titration data confirmed that the ratio-metric equivalent of OH⁻ to 1 was 1 : 1 (ESI, Fig. S1b^†). 3 was determined to be [(12TMC)Co^II(NO₂⁻)](BF₄) based on various spectroscopic and structural characterization experiments (vide infra).^15,26bOpen in a separate windowFig. 1(a) UV-vis spectral changes of 1 (0.50 mM, black line) upon addition of OH⁻ (1 equiv.) in CH₃CN under Ar at 273 K. Black line (1) changed to red line (3) upon addition of OH⁻. Inset: IR spectra of 3-¹⁴NO₂⁻ (blue line) and 3-¹⁵NO₂⁻ (red line) in KBr. (b) ESI-MS spectra of 3. The peak at 333.2 is assigned to [(12TMC)Co^II(NO₂)]⁺ (calcd m/z 333.1). Inset: isotopic distribution pattern for 3-¹⁴NO₂⁻ (red line) and 3-¹⁵NO₂⁻ (blue line).The FT-IR spectrum of 3 showed a characteristic peak for nitrite stretching at 1271 cm⁻¹ (Co^II-14NO₂⁻) and shifted to 1245 cm⁻¹ (Co^II-15NO₂⁻) when 3 was prepared by reacting ¹⁵N-labeled NO (Co^III-15NO) with OH⁻ (Inset, Fig. 1a and Fig. S2^†). The shifting of NO₂⁻ stretching (Δ = 30 cm⁻¹) indicates that the N-atom in the NO₂⁻ ligand is derived from Co^III-15NO. The ESI-MS spectrum of 3 showed a prominent peak at m/z 333.2, [(12TMC)Co^II(¹⁴NO₂⁻)]⁺ (calcd m/z 333.2), which shifted to 334.2, [(12TMC)Co^II(¹⁵NO₂⁻)]⁺ (calcd m/z 334.2), when the reaction was performed with Co^III-15NO (Inset, Fig. 1b; ESI, Fig. S3a^†); indicating clearly that NO₂⁻ in 3 was derived from the NO moiety of 1. In addition, we have reacted 1 with Na¹⁸OH (ES and ESI^†), in order to follow the source of the second O-atom in 3-NO₂⁻. The ESI-MS spectrum of the reaction mixture, obtained by reacting 1 with Na¹⁸OH, showed a prominent peak at m/z 335.2, [(12TMC)Co^II(¹⁸ONO⁻)]⁺ (calcd m/z 335.2), (SI, Fig. S3b^†) indicating clearly that NO₂⁻ in 3 was derived from ¹⁸OH⁻. The ¹H NMR spectrum of 3 did not show any signal for aliphatic protons of the 12TMC ligand, suggesting a bivalent cobalt center (Fig. S4^†).^26b Furthermore, we have determined the magnetic moment of 3, using Evans'' method, and it was found to be 4.62 BM, suggesting a high spin Co(ii) metal center with three unpaired electrons (ESI^† and ES).²⁹ The exact conformation of 3 was provided by single-crystal X-ray crystallographic analysis (Fig. 2b, ESI, ES, Fig. S5, and Tables T1 and T2^†) and similar to that of previously reported Co^II-NO₂⁻/M^II-NO₂⁻.^15,26b Also, we have quantified the amount of nitrite (90 ± 5%), formed in the above reaction, using the Griess reagent (ESI, ES, and Fig. S6^†).Open in a separate windowFig. 2Displacement ellipsoid plot (20% probability) of 3 at 100 K. Disordered C-atoms of the TMC ring, anion and H-atoms have been removed for clarity.As is known from the literature, a metal-nitrous acid intermediate may form either by the reaction of a metal-nitrosyl with a base²⁷ or by the metal-nitrite reaction with an acid (nitrite reduction chemistry);^26b however, the products of both the reactions are different. Here, for the first time, we have explored the reaction of Co^III-nitrosyl (1) with a base. In this reaction, it is clear that the formation of Co^II-nitrito would be accomplished by the release of H₂ gas via the generation of a transient N-bound [Co-(NOOH)]⁺ intermediate (Scheme 2, reaction (II)). The formation of Co^II-NO₂⁻ (3) from the [Co-(NOOH)]⁺ intermediate is likely to proceed by either (i) homolytic cleavage of the O–H bond and release of H₂via the proposed Co^III-H transient species (Co^III-H = Co^II + 1/2H₂)³⁰ (Scheme 2, reaction (III)), as reported in previous literature where the reduced cobalt, in a number of different ligand environments, is a good H⁺ reduction catalyst and generates H₂ gas via a Co^III-H intermediate³¹ or (ii) heterolytic cleavage of the O–H bond and the formation of Co^I-NO₂⁻ + H⁺.²⁷ In the present study, we observed the formation of 3 and H₂via the plausible homolytic cleavage of the NOO–H moiety of 2 as shown in Scheme 2, in contrast to the previous reports on base-induced reactions on metal-nitrosyls (eqn (3)).²⁷ Taking together both possibilities, (i) is the most reasonable pathway for the NOM reaction of complex 1 in the presence of a base (as shown in Scheme 2, reaction (III)). And the reaction is believed to go through a Co^III-H intermediate as reported previously in Co^I-induced H⁺ reduction in different ligand frameworks and based on literature precedence, we believe that complex 1 acts in a similar manner.³¹Open in a separate windowScheme 2NOM reaction of complex 1 in the presence of OH⁻, showing the generation of Co^II-nitrito (3) and H₂via a Co(iii)-hydrido intermediate.In contrast to an O-bound Co^II-ONOH intermediate, where N–O bond homolysis of the ON-OH moiety generates H₂O₂ (Scheme 2, reaction (IV)),^26b the N-bound [Co-(NOOH)]⁺ intermediate decomposes to form NO₂⁻ and a Co(iii)-H transient species, arising from β-hydrogen transfer from the NOO–H moiety to the cobalt-center (Scheme 2, reaction (II)).^30a,c,32 The Co(iii)-hydrido species may generate H₂ gas either (a) by its transformation to the Co(ii)-nitrito complex (2) and H₂ gas as observed in the case of Co^III-H intermediate chemistry^30a,c,e−g as proposed in the chemistry of the Co^I complex with H⁺ reduction³¹ and other metal-hydrido intermediates³² and also explained in O₂ formation in PN chemistry^17,33 or (b) by the reacting with another [Co-(NOOH)]⁺ intermediate (Scheme 2, reaction (III)).Furthermore, we have confirmed the H₂ formation in the NOM reaction of 1 with OH⁻ by headspace gas mass spectrometry (Fig. 3a). Also, carrying out the reaction of 1 with NaOD leads to the formation of the [Co-(NOOD)]⁺ intermediate, which then transforms to a Co^III-D transient species. Further, as described above, the Co^III-D species releases D₂ gas, detected by headspace gas mass spectrometry (Fig. 3b), which evidently established that H₂ gas formed in the reaction of 1 with OH⁻. In this regard, we have proposed that in the first step of this reaction, the nucleophilic addition of OH⁻ to {Co-NO}⁸ generates a transient N-bound [Co-(NOOH)]⁺ intermediate that is generated by an internal electron transfer to Co^III (Scheme 2, reaction (I)). By following the mechanism proposed in the case of Co^III-H,^30a−c O₂,¹⁵ and H₂O₂(ref. 26b) formation, we have proposed the sequences of the NOM reaction of 1, which leads to the generation of Co^II-nitrito and H₂ (Scheme 2, reaction (I)–(III) and Scheme 3). In the second step, O–H bond homolytic cleavage generates a Co^III-H transient species + NO₂⁻via a β-hydrogen elimination reaction of the [Co-(NOOH)]⁺ intermediate.³² The Co^III-H intermediate may undergo the following reactions to generate H₂ gas and Co^II-nitrito either (a) by the natural decomposition of the Co^III-H transient species to generate H₂,^30a,c,e−g or (b) by the H-atom abstraction from another [Co-(NOOH)]⁺ intermediate (Scheme 3). Also, to validate our assumption that the reaction goes through a plausible N-bound [Co-(NOOH)]⁺ intermediate followed by its transformation to the Co^III-H species (vide supra), we have performed the reaction of 1 with NaOH/NaOD (in 1 : 1 ratio). In this reaction, we have observed the formation of a mixture of H₂, D₂, and HD gases, which indicates clearly that the reaction goes through the formation of Co^III-H and Co^III-D transient species via the aforementioned mechanism (Fig. 3c). This is the only example where tracking of the H atoms has confirmed the H₂ generation from an N-bound NOO–H moiety as proposed for H₂ formation from Co^III-H.³⁰Open in a separate windowFig. 3Mass spectra of formation of (a) H₂ in the reaction of 1 (5.0 mM) with NaOH (5.0 mM), (b) D₂ in the reaction of 1 (5.0 mM) with NaOD (5.0 mM), (c) D₂, HD, and H₂ in the reaction of 1 (5.0 mM) with NaOD/NaOH (1 : 1), and (d) H₂ in the reaction of 1 (5.0 mM) with NaOH in the presence of 2,4 DTBP (50 mM).Open in a separate windowScheme 3NOM reaction of complex 1 in the presence of OH⁻, showing the different steps of the reaction.While, we do not have direct spectral evidence to support the formation of the transient N-bound [Co-(NOOH)]⁺ intermediate and its decomposition to the Co^III-H transient species via β-hydrogen transfer from the NOOH moiety to the cobalt center, support for its formation comes from our finding that the reactive hydrogen species can be trapped by using 2,4-di-tert-butyl-phenol (2,4-DTBP).³⁴ In this reaction, we observed the formation of 2,4-DTBP-dimer (2,4-DTBP-D, ∼67%) as a single product (ESI, ES, and Fig. S7^†). This result can readily be explained by the H-atom abstraction reaction of 2,4-DTBP either by [Co-(NOOH)]⁺ or Co^III-H, hence generating a phenoxyl-radical and 3 with H₂ (Fig. 3d and Scheme 2, reaction (a)). Also, we have detected H₂ gas formation in this reaction (ESI,^† ES, and Fig. 3d). In the next step, two phenoxyl radicals dimerized to give 2,4-DTBP-dimer (Scheme 2c, reaction (II)). Thus, the observation of 2,4-DTBP-dimer in good yield supports the proposed reaction mechanism (Scheme 2, reaction (a) and (b)). Further, the formation of 2,4 DTBP as a single product also rules out the formation of the hydroxyl radical as observed in the case of an O-bound nitrous acid intermediate.^26bFurthermore, we have explored the NOM reactivity of 1 with Na₂O/15-crown-5 (as the O²⁻ source) and observed the formation of the Co^II-nitrito complex (3) via a plausible Co^I-nitro (4) intermediate (Scheme 1, reaction (IIa); also see the ESI^† and ES); however, 1 was found to be inert towards H₂O (Scheme 1, reaction (III); also see the ESI, ES and Fig. S8^†). The product obtained in the reaction of 1 with O²⁻ was characterized by various spectroscopic measurements.^15,26b The UV-vis absorption band of 1 (λ_max = 370 nm) disappears upon the addition of 1 equiv. of Na₂O and a new band (λ_max = 535 nm) forms, which corresponds to 3 (ESI, Fig. S9^†). The FT-IR spectrum of the isolated product of the above reaction shows a characteristic peak for Co^II-bound nitrite at 1271 cm⁻¹, which shifts to 1245 cm⁻¹ when exchanged with ¹⁵N-labeled-NO (¹⁵N¹⁶O) (ESI, ES, and Fig. S10^†), clearly indicating the generation of nitrite from the NO ligand of complex 1.^26b The ESI-MS spectrum recorded for the isolated product (vide supra) shows a prominent ion peak at m/z 333.1, and its mass and isotope distribution pattern matches with [(12-TMC)Co^II(NO₂)]⁺ (calc. m/z 333.1) (ESI, Fig. S11^†). Also, we quantified the amount of 3 (85 ± 5%) by quantifying the amount of nitrite (85 ± 5%) using the Griess reagent test (ESI, ES, and Fig. S6^†).In summary, we have demonstrated the reaction of Co^III-nitrosyl, [(12-TMC)Co^III(NO⁻)]²⁺/{CoNO}⁸ (1), with mono-oxygen reactive species (O²⁻, OH⁻ and H₂O) (Scheme 1). For the first time, we have established the clear formation of a Co^II-nitrito complex, [(12TMC)Co^II(NO₂⁻)]⁺ (3), and H₂ in the reaction of 1 with one equivalent of OH⁻via a transient N-bound [Co-(NOOH)]⁺ (2) intermediate. This [Co-(NOOH)]⁺ intermediate undergoes the O–H bond homolytic cleavage and generates a Co^III-H transient species with NO₂⁻, via a β-hydrogen elimination reaction of the [Co-(NOOH)]⁺ intermediate, which upon decomposition produces H₂ gas. This is in contrast to our previous report, where acid-induced nitrite reduction of 3 generated 1 and H₂O₂via an O-bound Co^II-ONOH intermediate.^26b Complex 1 was found to be inert towards H₂O; however, we have observed the formation of 3 when reacted with O²⁻. It is important to note that H₂ formation involves a distinctive pathway of O–H bond homolytic cleavage in the [Co-(NOOH)]⁺ intermediate, followed by the generation of the proposed Co^III-H transient species (Co^II + 1/2H₂)³⁰ prior to H₂ evolution as described in Co^I chemistry with H⁺ in many different ligand frameworks.³¹ The present study is the first-ever report where the base induced NOM reaction of Co^III-nitrosyl (1) leads to Co^II-nitrito (3) with H₂ evolution via an N-bound [Co-(NOOH)]⁺ intermediate, in contrast to the chemistry of O-bound Co^II-ONOH^26b, hence adding an entirely new mechanistic insight of base induced H₂ gas evolution and an additional pathway for NOM reactions.     

Single metal four-electron reduction by U(ii) and masked “U(ii)” compounds

The redox chemistry of uranium is dominated by single electron transfer reactions while single metal four-electron transfers remain unknown in f-element chemistry. Here we show that the oxo bridged diuranium(iii) complex [K(2.2.2-cryptand)]₂[{((Me₃Si)₂N)₃U}₂(μ-O)], 1, effects the two-electron reduction of diphenylacetylene and the four-electron reduction of azobenzene through a masked U(ii) intermediate affording a stable metallacyclopropene complex of uranium(iv), [K(2.2.2-cryptand)][U(η²-C₂Ph₂){N(SiMe₃)₂}₃], 3, and a bis(imido)uranium(vi) complex [K(2.2.2-cryptand)][U(NPh)₂{N(SiMe₃)₂}₃], 4, respectively. The same reactivity is observed for the previously reported U(ii) complex [K(2.2.2-cryptand)][U{N(SiMe₃)₂}₃], 2. Computational studies indicate that the four-electron reduction of azobenzene occurs at a single U(ii) centre via two consecutive two-electron transfers and involves the formation of a U(iv) hydrazide intermediate. The isolation of the cis-hydrazide intermediate [K(2.2.2-cryptand)][U(N₂Ph₂){N(SiMe₃)₂}₃], 5, corroborated the mechanism proposed for the formation of the U(vi) bis(imido) complex. The reduction of azobenzene by U(ii) provided the first example of a “clear-cut” single metal four-electron transfer in f-element chemistry.

Both a masked and the actual complex [U(ii){N(SiMe₃)₂}₃]⁺ effect the reduction of azobenzene to yield a U(vi) bis-imido species providing the first example of a “clear-cut” metal centred four-electron reduction in f-element chemistry.     

“Bottled” spiro-doubly aromatic trinuclear [Pd2Ru]+ complexes

Following an ongoing interest in the study of transition metal complexes with exotic bonding networks, we report herein the synthesis of a family of heterobimetallic triangular clusters involving Ru and Pd atoms. These are the first examples of trinuclear complexes combining these nuclei. Structural and bonding analyses revealed both analogies and unexpected differences for these [Pd₂Ru]⁺ complexes compared to their parent [Pd₃]⁺ peers. Noticeably, participation of the Ru atom in the π-aromaticity of the coordinated benzene ring makes the synthesized compound the second reported example of ‘bottled’ double aromaticity. This can also be referred to as spiroaromaticity due to the participation of Ru in two aromatic systems at a time. Moreover, the [Pd₂Ru]⁺ kernel exhibits unprecedented orbital overlap of Ru d_z² AO and two Pd d_xy or d_x²−y² AOs. The present findings reveal the possibility of synthesizing stable clusters with delocalized metal–metal bonding from the combination of non-adjacent elements of the periodic table which has not been reported previously.

Synthesis of a triangular [Pd₂Ru]⁺ complex with delocalized metal–metal bonding between non-adjacent elements of the periodic table, double aromaticity and overlap of d-AOs with different angular momentum.     

Delocalization tunable by ligand substitution in [L2Al]n− complexes highlights a mechanism for strong electronic coupling

Ligand-based mixed valent (MV) complexes of Al(iii) incorporating electron donating (ED) and electron withdrawing (EW) substituents on bis(imino)pyridine ligands (I₂P) have been prepared. The MV states containing EW groups are both assigned as Class II/III, and those with ED functional groups are Class III and Class II/III in the (I₂P⁻)(I₂P²⁻)Al and [(I₂P²⁻)(I₂P³⁻)Al]²⁻ charge states, respectively. No abrupt changes in delocalization are observed with ED and EW groups and from this we infer that ligand and metal valence p-orbitals are well-matched in energy and the absence of LMCT and MLCT bands supports the delocalized electronic structures. The MV ligand charge states (I₂P⁻)(I₂P²⁻)Al and [(I₂P²⁻)(I₂P³⁻)Al]²⁻ show intervalence charge transfer (IVCT) transitions in the regions 6850–7740 and 7410–9780 cm⁻¹, respectively. Alkali metal cations in solution had no effect on the IVCT bands of [(I₂P²⁻)(I₂P³⁻)Al]²⁻ complexes containing –PhNMe₂ or –PhF₅ substituents. Minor localization of charge in [(I₂P²⁻)(I₂P³⁻)Al]²⁻ was observed when –PhOMe substituents are included.

Organo-aluminum mixed-valent complexes combine properties of both organic and transition element mixed-valent compounds. This supports delocalized electronic structures that are structurally and electronically tunable.     

Understanding the factors governing the water oxidation reaction pathway of mononuclear and binuclear cobalt phthalocyanine catalysts

The rational design of efficient catalysts for electrochemical water oxidation highly depends on the understanding of reaction pathways, which still remains a challenge. Herein, mononuclear and binuclear cobalt phthalocyanine (mono-CoPc and bi-CoPc) with a well-defined molecular structure are selected as model electrocatalysts to study the water oxidation mechanism. We found that bi-CoPc on a carbon support (bi-CoPc/carbon) shows an overpotential of 357 mV at 10 mA cm⁻², much lower than that of mono-CoPc/carbon (>450 mV). Kinetic analysis reveals that the rate-determining step (RDS) of the oxygen evolution reaction (OER) over both electrocatalysts is a nucleophilic attack process involving a hydroxy anion (OH⁻). However, the substrate nucleophilically attacked by OH⁻ for bi-CoPc is the phthalocyanine cation-radical species (Co^II–Pc–Pc˙⁺–Co^II–OH) that is formed from the oxidation of the phthalocyanine ring, while cobalt oxidized species (Pc–Co^III–OH) is involved in mono-CoPc as evidenced by the operando UV-vis spectroelectrochemistry technique. DFT calculations show that the reaction barrier for the nucleophilic attack of OH⁻ on Co^II–Pc–Pc˙⁺–Co^II–OH is 1.67 eV, lower than that of mono-CoPc with Pc–Co^III–OH nucleophilically attacked by OH⁻ (1.78 eV). The good agreement between the experimental and theoretical results suggests that bi-CoPc can effectively stabilize the accumulated oxidative charges in the phthalocyanine ring, and is thus bestowed with a higher OER performance.

bi-CoPc can stabilize accumulated oxidative charges in phthalocyanine ring, which leads to the OER proceeding through a nucleophilic attack of OH^- on the phthalocyanine cation-radical species that is formed from the oxidation of phthalocyanine ring.     

Catalyst control of selectivity in the C–O bond alumination of biomass derived furans

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C–O bond of the heterocycle. Specifically, the reaction of [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl, 1) with furans proceeded between 25 and 80 °C leading to dearomatised products due to the net transformation of a sp² C–O bond into a sp² C–Al bond. The kinetics of the reaction of 1 with furan were found to be 1st order with respect to 1 with activation parameters ΔH^‡ = +19.7 (±2.7) kcal mol⁻¹, ΔS^‡ = −18.8 (±7.8) cal K⁻¹ mol⁻¹ and ΔG^‡_{298 K} = +25.3 (±0.5) kcal mol⁻¹ and a KIE of 1.0 ± 0.1. DFT calculations support a stepwise mechanism involving an initial (4 + 1) cycloaddition of 1 with furan to form a bicyclic intermediate that rearranges by an α-migration. The selectivity of ring-expansion is influenced by factors that weaken the sp² C–O bond through population of the σ*-orbital. Inclusion of [Pd(PCy₃)₂] as a catalyst in these reactions results in expansion of the substrate scope to include 2,3-dihydrofurans and 3,4-dihydropyrans and improves selectivity. Under catalysed conditions, the C–O bond that breaks is that adjacent to the sp²C–H bond. The aluminium(iii) dihydride reagent [{(MesNCMe)₂CH}AlH₂] (Mes = 2,4,6-trimethylphenyl, 2) can also be used under catalytic conditions to effect a dehydrogenative ring-expansion of furans. Further mechanistic analysis shows that C–O bond functionalisation occurs via an initial C–H bond alumination. Kinetic products can be isolated that are derived from installation of the aluminium reagent at the 2-position of the heterocycle. C–H alumination occurs with a KIE of 4.8 ± 0.3 consistent with a turnover limiting step involving oxidative addition of the C–H bond to the palladium catalyst. Isomerisation of the kinetic C–H aluminated product to the thermodynamic C–O ring expansion product is an intramolecular process that is again catalysed by [Pd(PCy₃)₂]. DFT calculations suggest that the key C–O bond breaking step involves attack of an aluminium based metalloligand on the 2-palladated heterocycle. The new methodology has been applied to important platform chemicals from biomass.

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C–O bond of the heterocycle.     

FLP-type nitrile activation and cyclic ether ring-opening by halo-borane nonagermanide-cluster Lewis acid–base pairs

Even though homoatomic nine-atom germanium clusters are known for two decades, their chemical properties are still rarely investigated. We now discovered that Zintl ion main group-element clusters possess a reactive lone pair of electrons, and we show a new pathway to bind ligands with functional groups to the [Ge₉] cluster core through Ge–C bond formation. We report on the reactivity of [Ge₉{Si(TMS)₃}₂]²⁻ (TMS = trimethylsilyl) towards a series of Lewis acidic bromo-boranes. The reaction of [Ge₉{Si(TMS)₃}₂]²⁻ and DAB^o-tol–Br (DAB = 1,3,2-diazaborolidine; o-tol = 2-methylphenyl) resulted, depending on the reaction protocol, either in the formation of [Ge₉{Si(TMS)₃}₂DAB^o-tol]⁻ (1a) with direct Ge–B interactions, or in [Ge₉{Si(TMS)₃}₂(CH₂)₄O–DAB^o-tol]⁻ (2a) featuring a ring-opened thf moiety. Ring opening reactions occur for all bulkier DAB^R–Br [R: o-xyl (2,6-dimethylphenyl), Mes (2,4,6-trimethylphenyl), Dipp (2,6-diisopropylphenyl)], DAB(ii)^Dipp–Br and acyclic (ⁱPr₂N)₂BBr without Ge–B bond formation as shown for the structural characterization of the ring-opened products of thf (3, 4) and trimethylene oxide (5). In contrast to thf, the activation of CH₃CN requires the simultaneous presence of Lewis-acid and Lewis-basic reactants allowing the formation of [Ge₉{Si(TMS)₃}₂CH₃C N–DAB^Mes]⁻ (6a). Within the presented compounds, 3 and 4 show an unusual substitution pattern of the three ligands at the [Ge₉] core in the solid state. The [Ge₉] cluster/borane systems correspond to intermolecular frustrated Lewis pairs (FLPs), in which the [Ge₉] cluster with several lone pairs represents the Lewis base, and the borane is the Lewis acid.

The reactivity of the lone pairs in polyhedral Zintl anions is shown by the reaction of the bis-silylated cluster [Ge₉{Si(TMS)₃}₂]²⁻ accomplishing cyclic-ether ring-opening or nitrile activation according to a FLP-like mechanism with bromo-boranes.     

Radiation-Induced Oxidation Reactions of 2-Selenouracil in Aqueous Solutions: Comparison with Sulfur Analog of Uracil

One-electron oxidation of 2-selenouracil (2-SeU) by hydroxyl (^●OH) and azide (^●N₃) radicals leads to various primary reactive intermediates. Their optical absorption spectra and kinetic characteristics were studied by pulse radiolysis with UV-vis spectrophotometric and conductivity detection and by the density functional theory (DFT) method. The transient absorption spectra recorded in the reactions of ^●OH with 2-SeU are dominated by an absorption band with an λ_max = 440 nm, the intensity of which depends on the concentration of 2-SeU and pH. Based on the combination of conductometric and DFT studies, the transient absorption band observed both at low and high concentrations of 2-SeU was assigned to the dimeric 2c-3e Se-Se-bonded radical in neutral form (2^●). The dimeric radical (2^●) is formed in the reaction of a selenyl-type radical (6^●) with 2-SeU, and both radicals are in equilibrium with K_eq = 1.3 × 10⁴ M⁻¹ at pH 4 (below the pK_a of 2-SeU). Similar equilibrium with K_eq = 4.4 × 10³ M⁻¹ was determined for pH 10 (above the pK_a of 2-SeU), which admittedly involves the same radical (6^●) but with a dimeric 2c-3e Se-Se bonded radical in anionic form (2^●−). In turn, at the lowest concentration of 2-SeU (0.05 mM) and pH 10, the transient absorption spectrum is dominated by an absorption band with an λ_max = 390 nm, which was assigned to the ^●OH adduct to the double bond at C5 carbon atom (3^●) based on DFT calculations. Similar spectral and kinetic features were also observed during the ^●N₃-induced oxidation of 2-SeU. In principle, our results mostly revealed similarities in one-electron oxidation pathways of 2-SeU and 2-thiouracil (2-TU). The major difference concerns the stability of dimeric radicals with a 2c-3e chalcogen-chalcogen bond in favor of 2-SeU.     

Single-molecule junctions of multinuclear organometallic wires: long-range carrier transport brought about by metal–metal interaction

Here, we report multinuclear organometallic molecular wires having (2,5-diethynylthiophene)diyl-Ru(dppe)₂ repeating units. Despite the molecular dimensions of 2–4 nm the multinuclear wires show high conductance (up to 10⁻² to 10⁻³G₀) at the single-molecule level with small attenuation factors (β) as revealed by STM-break junction measurements. The high performance can be attributed to the efficient energy alignment between the Fermi level of the metal electrodes and the HOMO levels of the multinuclear molecular wires as revealed by DFT–NEGF calculations. Electrochemical and DFT studies reveal that the strong Ru–Ru interaction through the bridging ligands raises the HOMO levels to access the Fermi level, leading to high conductance and small β values.

Multinuclear organometallic molecular wires having (diethynylthiophene)diyl-Ru(dppe)₂ repeating units show high conductance with small attenuation factors. The strong Ru–Ru interaction is the key for the long-range carrier transport.     

Au3-to-Ag3 coordinate-covalent bonding and other supramolecular interactions with covalent bonding strength

An efficient strategy for designing charge-transfer complexes using coinage metal cyclic trinuclear complexes (CTCs) is described herein. Due to opposite quadrupolar electrostatic contributions from metal ions and ligand substituents, [Au(μ-Pz-(i-C₃H₇)₂)]₃·[Ag(μ-Tz-(n-C₃F₇)₂)]₃ (Pz = pyrazolate, Tz = triazolate) has been obtained and its structure verified by single crystal X-ray diffraction – representing the 1^st crystallographically-verified stacked adduct of monovalent coinage metal CTCs. Abundant supramolecular interactions with aggregate covalent bonding strength arise from a combination of M–M′ (Au → Ag), metal–π, π–π interactions and hydrogen bonding in this charge-transfer complex, according to density functional theory analyses, yielding a computed binding energy of 66 kcal mol⁻¹ between the two trimer moieties – a large value for intermolecular interactions between adjacent d¹⁰ centres (nearly doubling the value for a recently-claimed Au(i) → Cu(i) polar-covalent bond: Proc. Natl. Acad. Sci. U.S.A., 2017, 114, E5042) – which becomes 87 kcal mol⁻¹ with benzene stacking. Surprisingly, DFT analysis suggests that: (a) some other literature precedents should have attained a stacked product akin to the one herein, with similar or even higher binding energy; and (b) a high overall intertrimer bonding energy by inferior electrostatic assistance, underscoring genuine orbital overlap between M and M′ frontier molecular orbitals in such polar-covalent M–M′ bonds in this family of molecules. The Au → Ag bonding is reminiscent of classical Werner-type coordinate-covalent bonds such as H₃N: → Ag in [Ag(NH₃)₂]⁺, as demonstrated herein quantitatively. Solid-state and molecular modeling illustrate electron flow from the π-basic gold trimer to the π-acidic silver trimer with augmented contributions from ligand-to-ligand’ (LL′CT) and metal-to-ligand (MLCT) charge transfer.

A stacked Ag₃–Au₃ bonded (66 kcal mol⁻¹) complex obtained crystallographically exhibits charge-transfer characteristics arising from multiple cooperative supramolecular interactions.     

Stabilizing a three-center single-electron metal–metal bond in a fullerene cage

Trimetallic carbide clusterfullerenes (TCCFs) encapsulating a quinary M₃C₂ cluster represent a special family of endohedral fullerenes with an open-shell electronic configuration. Herein, a novel TCCF based on a medium-sized rare earth metal, dysprosium (Dy), is synthesized for the first time. The molecular structure of Dy₃C₂@I_h(7)-C₈₀ determined by single crystal X-ray diffraction shows that the encapsulated Dy₃C₂ cluster adopts a bat ray configuration, in which the acetylide unit C₂ is elevated above the Dy₃ plane by ∼1.66 Å, while Dy–Dy distances are ∼3.4 Å. DFT computational analysis of the electronic structure reveals that the endohedral cluster has an unusual formal charge distribution of (Dy₃)⁸⁺(C₂)²⁻@C₈₀⁶⁻ and features an unprecedented three-center single-electron Dy–Dy–Dy bond, which has never been reported for lanthanide compounds. Moreover, this electronic structure is different from that of the analogous Sc₃C₂@I_h(7)-C₈₀ with a (Sc₃)⁹⁺(C₂)³⁻@C₈₀⁶⁻ charge distribution and no metal–metal bonding.

A novel trimetallic carbide clusterfullerene, Dy₃C₂@I_h(7)-C₈₀, was successfully synthesized and isolated, and the encapsulated Dy₃C₂ cluster adopts a bat ray configuration featuring an unprecedented three-center single-electron Dy–Dy–Dy bond.     

Trimacrocyclic hexasubstituted benzene linked by labile octahedral [X(CHCl3)6]− clusters

Crystalline supramolecular architectures mediated by cations, anions, ion pairs or neutral guest species are well established. However, the robust crystallization of a well-designed receptor mediated by labile anionic solvate clusters remains unexplored. Herein, we describe the synthesis and crystalline behaviors of a trimacrocyclic hexasubstituted benzene 2 in the presence of guanidium halide salts and chloroform. Halide hexasolvate clusters, viz. [Cl(CHCl₃)₆]⁻, [Br(CHCl₃)₆]⁻, and [I(CHCl₃)₆]⁻, were found to be critical to the crystallization process, as suggested by the single-crystal structures, X-ray powder diffraction (XRPD), thermogravimetric analysis (TGA), scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS), and NMR spectroscopy. This study demonstrates the hitherto unexpected role that labile ionic solvate clusters can play in stabilizing supramolecular architectures.

We report the synthesis and robust crystallization of a trimacrocyclic hexasubstituted benzene and guanidium mediated by unprecedented labile halide hexasolvate clusters, viz. [Cl(CHCl₃)₆]⁻, [Br(CHCl₃)₆]⁻, [I(CHCl₃)₆]⁻, and [Br(CHBr₃)₆]⁻.     

The atomic-level structure of bandgap engineered double perovskite alloys Cs2AgIn1−xFexCl6

Although lead-free halide double perovskites are considered as promising alternatives to lead halide perovskites for optoelectronic applications, state-of-the-art double perovskites are limited by their large bandgap. The doping/alloying strategy, key to bandgap engineering in traditional semiconductors, has also been employed to tune the bandgap of halide double perovskites. However, this strategy has yet to generate new double perovskites with suitable bandgaps for practical applications, partially due to the lack of fundamental understanding of how the doping/alloying affects the atomic-level structure. Here, we take the benchmark double perovskite Cs₂AgInCl₆ as an example to reveal the atomic-level structure of double perovskite alloys (DPAs) Cs₂AgIn_1−xFe_xCl₆ (x = 0–1) by employing solid-state nuclear magnetic resonance (ssNMR). The presence of paramagnetic alloying ions (e.g. Fe³⁺ in this case) in double perovskites makes it possible to investigate the nuclear relaxation times, providing a straightforward approach to understand the distribution of paramagnetic alloying ions. Our results indicate that paramagnetic Fe³⁺ replaces diamagnetic In³⁺ in the Cs₂AgInCl₆ lattice with the formation of [FeCl₆]³⁻·[AgCl₆]⁵⁻ domains, which show different sizes and distribution modes in different alloying ratios. This work provides new insights into the atomic-level structure of bandgap engineered DPAs, which is of critical significance in developing efficient optoelectronic/spintronic devices.

Through Fe³⁺-alloying, the bandgap of benchmark double perovskite Cs₂AgInCl₆ can be tuned from 2.8 eV to 1.6 eV. The atomic-level structure of Cs₂AgIn_1−xFe_xCl₆ was revealed by solid-state nuclear magnetic resonance (ssNMR).     

Trends in trigonal prismatic Ln-[1]ferrocenophane complexes and discovery of a Ho3+ single-molecule magnet

Lanthanide metallocenophanes are an intriguing class of organometallic complexes that feature rare six-coordinate trigonal prismatic coordination environments of 4f elements with close intramolecular proximity to transition metal ions. Herein, we present a systematic study of the structural and magnetic properties of the ferrocenophanes, [LnFc₃(THF)₂Li₂]⁻, of the late trivalent lanthanide ions (Ln = Gd (1), Ho (2), Er (3), Tm (4), Yb (5), Lu (6)). One major structural trend within this class of complexes is the increasing diferrocenyl (Fc²⁻) average twist angle with decreasing ionic radius (r_ion) of the central Ln ion, resulting in the largest average Fc²⁻ twist angles for the Lu³⁺ compound 6. Such high sensitivity of the twist angle to changes in r_ion is unique to the here presented ferrocenophane complexes and likely due to the large trigonal plane separation enforced by the ligand (>3.2 Å). This geometry also allows the non-Kramers ion Ho³⁺ to exhibit slow magnetic relaxation in the absence of applied dc fields, rendering compound 2 a rare example of a Ho-based single-molecule magnet (SMM) with barriers to magnetization reversal (U) of 110–131 cm⁻¹. In contrast, compounds featuring Ln ions with prolate electron density (3–5) don''t show slow magnetization dynamics under the same conditions. The observed trends in magnetic properties of 2–5 are supported by state-of-the-art ab initio calculations. Finally, the magneto-structural relationship of the trigonal prismatic Ho-[1]ferrocenophane motif was further investigated by axial ligand (THF in 2) exchange to yield [HoFc₃(THF*)₂Li₂]⁻ (2-THF*) and [HoFc₃(py)₂Li₂]⁻ (2-py) motifs. We find that larger average Fc²⁻ twist angles (in 2-THF* and 2-py as compared to in 2) result in faster magnetic relaxation times at a given temperature.

Lanthanide ferrocenophanes are an intriguing class of organometallic complexes that feature rare six-coordinate trigonal prismatic coordination environments of 4f elements with close intramolecular proximity to iron ions.     

Magnesium–halobenzene bonding: mapping the halogen sigma-hole with a Lewis-acidic complex

Complexes of the Lewis base-free cations (^MeBDI)Mg⁺ and (^tBuBDI)Mg⁺ with Ph–X ligands (X = F, Cl, Br, I) have been studied (^MeBDI = HC[C(Me)N-DIPP]₂ and ^tBuBDI = HC[C(tBu)N-DIPP]₂; DIPP = 2,6-diisopropylphenyl). For the smaller β-diketiminate ligand (^MeBDI) only complexes with PhF could be isolated. Heavier Ph–X ligands could not compete with bonding of Mg to the weakly coordinating anion B(C₆F₅)₄⁻. For the cations with the bulkier ^tBuBDI ligand, the full series of halobenzene complexes was structurally characterized. Crystal structures show that the Mg⋯X–Ph angle strongly decreases with the size of X: F 139.1°, Cl 101.4°, Br 97.7°, I 95.1°. This trend, which is supported by DFT calculations, can be explained with the σ-hole which increases from F to I. Charge calculation and Atoms-In-Molecules analyses show that Mg⋯F–Ph bonding originates from electrostatic attraction between Mg²⁺ and the very polar C^δ+–F^δ− bond. For the heavier halobenzenes, polarization of the halogen atom becomes increasingly important (Cl < Br < I). Complexation with Mg leads in all cases to significant Ph–X bond activation and elongation. This unusual coordination of halogenated species to early main group metals is therefore relevant to C–X bond breaking.

Complexes of a highly Lewis acidic Mg cation and the full series of Ph–X (X = F, Cl, Br, I) have been structurally characterized. The Mg⋯X–Ph angle decreases with halogen size on account of the growing halogen σ-hole.