Liquid crystalline perfluoroazomethines and perfluoropropenes exhibiting large dielectric anisotropies

Novel liquid crystalline compounds containing phenylperfluoroazomethine and cyclohexylperfluoropropene moieties have been synthesized. The perfluoroazomethine compounds exhibited large Δε values of up to 24.3, which is greater than those of the trifluorobenzene or trifluoromethoxybenzene derivatives that are used in TN-TFT LCDs. The perfluoropropene compounds exhibited low values of Δn (0.044-0.057) as well as large Δε values (6.3-8.1), which are the properties required for reflection-type LCDs.     

Combined main chain/side chain polymers. A new class of liquid crystalline polymers with unusual structural, thermodynamic and dynamic properties

Combined main chain/side chain polymers carry rigid rod-like mesogenic units both in the side chain and along the chain backbone. The properties of such combined systems are expected to be controlled by the competition of the interactions between the mesogenic units in the side and main chains as well as the tendency of the chain backbones to maximize their entropy. The thermodynamic, structural and dynamic properties of such combined main chain/side chain liquid-crystalline polymers were investigated for various chain architectures. The combined systems were found to display properties corresponding in many cases to a favourable superposition of properties characteristic of both main and side chain systems. These include high transition temperatures (up to 530 K) and broad ranges of stability of liquid-crystalline phases (up to about ΔT = 170 K). The orientational order parameter was found to approach values of 0.9 and it was possible to orient some of the polymers in weak external fields such as 1 T for instance, for magnetic fields. Smectic antiphase formation corresponding to that observed in low molar mass systems carrying strong longitudinal dipoles and resulting from the presence of incommensurable lengths were observed in those cases in which the side groups were attached directly to the rigid part of the chain backbone whereas no such effects occurred if the side groups were fixed to the flexible part of the main chain. The reorientational motion of the mesogens about their short axis, which couples to dielectric and electro-optical properties was found to have a surprisingly low activation energy (as low as 115 kJ/mol) and a strong anisotropy of the dielectric constant (Δε = 7) despite a relatively small concentration of dipoles. It thus seems that the combined systems may be the material of choice for many future applications.     

Effect of molecular structure on mesomorphism XXI. Monodisperse tetrameric model compounds for liquid crystalline polymers

Abstract

Twinned dimeric mesogens having a rigid-flexible-rigid molecular structure have been shown to be appropriate models for some properties of regularly alternating (rigid-flexible)_n main chain liquid crystalline polymers (lcps). A family of tetrameric monodisperse liquid crystalline model compounds chemically related to known main chain liquid crystalline polymers of the 4-alkoxyphenyl 4′-alkoxy-benzoate type has been synthesized. The tetramers are nematogenic. Alternations in thermodynamic parameters (ΔH, ΔS) for the N-I transition as a function of spacer chain length indicate conformational behaviour of the internal spacers dominates mesophase properties.     

The structure of δ-cadinol

Albicaulol, a crystalline cadinol isolated from the oleoresin of Pinus albicaulis and Pinus armandi, has been found to be identical with δ-cadinol. The structure of δ-cadinol has been shown to be Δ⁸-cadinene-3-ol rather than the Δ⁹-structure assigned by Motl, Sýkora, Herout and orm.     

Antiferroelectric liquid crystals derived from a new optically active (R)-3-ethylmercapto-2-methylpropionic acid

A new optically active (R)-3-ethylmercapto-2-methylpropionic acid has been synthesized using D(-)—2,10-camphorsultam as a chiral auxiliary. The optical purity of the acid obtained was greater than 98 per cent. Its derivatives, (R)-4-(3-ethylmercapto-2-methylpropionyl)phenyl 4'-alkoxybiphenyl-4-carboxylates (EMMPPmBC; m = 7-16), have been prepared for the investigation of liquid crystalline properties as a function of peripheral alkyl chain length. Optical studies showed that all members exhibited an antiferroelectric S*c_A phase. The results also indicate that a lengthened alkyl chain length is favoured for S_cA* phase formation.     

Azobenzene containing polymers: what is yet viable with aged liquid crystals

A Commentary on the paper “Photochromic liquid crystalline polymers. Main chain and side chain polymers containing azobenzene mesogens„, by A. S. Angeloni, D. Caretti, C. Carlini, E. Chiellini, G. Galli, A. Altomare, R. Solaro and M. Laus. First published in Liquid Crystals, 4, 513-527 (1989).     

Surface properties of ω-perfluorooctyl-alkyl polyacrylates: odd–even effect

A series of ω-perfluorooctyl-alkyl polyacrylates has been prepared and analysed. The odd–even effect, already observed in the case of liquid crystalline polymers has been exhibited for perfluorinated ones. Values of the contact angles to advanced (θ_a), with withdrawal (θ_r), as well as the contact angle hysteresis (Δθ) of various ω-perfluorooctyl-alkyl polyacrylates in water at 20 °C are described. Contrary to the advancing contact angle which is almost independent of spacer length, the receding one varies strongly with it.     

The optical properties of polymethylmethacrylate polymer dispersed liquid crystals

The effect of the addition of polymer liquid crystals as dispersed molecules to polymethylmethacrylate (PMMA) on the optical properties in the UV-visible and near infrared regions is investigated. From transmission, absorption and reflection spectra the absorption coefficient (ω) and refractive index (n) at angular frequency of radiation (ω) have been calculated at room temperature. The values of the optical band gap (E_opt) have been obtained from the direct allowed transitions in k-space. The width of the tails of localized states in the band gap (ΔE) was evaluated from Urbach edges. Both the parameters (E_opt) and (ΔE) vary with the mixing ratio of dispersed liquid crystals.     

Direct decoration of disclinations by solidification-induced band texture for a nematic side chain liquid crystalline polymer

For a nematic polymethacrylate side chain liquid crystalline polymer, g 154 N 298 I (°C), the solidification-induced band texture has been observed aligned along the disclination under a polarizing optical microscope, when the specimen was quenched from 280°C to room temperature. The decoration technique of solidification-induced band texture, which is usually reported for main chain liquid crystalline polymers, was then introduced to reveal the director field pattern along a disclination for this side chain liquid crystalline polymer. It was found by infra-red dichroism measurements that the director orientation is parallel with the direction of the band. On this basis, disclinations with strength s=±1/2 and s=±1 were mapped according to the corresponding pattern of solidification-induced band texture. In addition, two types of inversion wall, loop-like and splay-type walls, were also found to be decorated by the solidification-induced band texture.     

Synthesis and properties of new three-ring phenylacetylene liquid crystals containing the cyclohexyl unit

Two series of new three-ring phenylacetylene liquid crystals were synthesized and their physical properties were evaluated. These liquid crystal materials show only a nematic phase, high clearing points and good solubilities. The compounds containing two cyclohexyl rings exhibit moderate birefringence (Δn) values of around 0.14, while those containing one cyclohexyl ring show a broad nematic phase range and high Δn of around 0.33.     

Fluorescent ferroelectric liquid crystalline copolyacrylates

Fluorescent liquid crystalline side chain polymers were synthesized by copolymerization of a ferroelectric monomer and 5 per cent of various blue fluorescent naphthalic imide dye comonomers. Those copolymers were characterized by DSC, X-ray, GPC and optical microscopy. In favourable cases, fast switching fluorescent ferroelectric polymers resulted, exhibiting high tilt angles (up to ∼ 34°) and spontaneous polarization values (up to ∼ 115 nC cm^-2) in the S*_c phase. One fluorescent copolymer shows orthogonal smectic phases exclusively due to the structure of the incorporated fluorescent comonomer. In this case a strong electroclinic effect and high induced tilt angles (12° 10 V μm^-1) have been observed in the S_a phase. Order parameters, S, of the dye moieties up to 0.64 were measured in the room temperature S_b phase for the copolymers     

Relationship between the Frank elastic constant anisotropy measured from the lamellar director and that of the molecular director around disclinations in main chain liquid crystalline polymers

The transmission electron microscope technique enables direct visualization of disclination core structure of main chain liquid crystalline polymers. Generally, the lamellar structure, that is a function of type of polymer and molecular length, and of which the thickness is 10-200 nm, can be observed. In terms of distortions in the director field produced by a disclination, the elastic anisotropy, ε, can easily be calculated. However, the ε does not indicate the molecular distortion produced by the disclination. Continuum mechanics is used to describe the relationship between the elastic anisotropy, ε_a, measured from the lamellar director and that, ε_b, of the molecular director in main chain liquid crystalline polymers. The relationship is ε_a = -ε_b, indicating that lamellar distortion is completely different from the molecular distortion.     

Induced G phase through intermolecular hydrogen bonding: X. Crystallization kinetics study on two structural isomers

A comparative systematic crystallization kinetics study has been carried out on two distinct novel liquid crystalline isomers, DBA : R :DBA and DBA : H :DBA (where DBA = p-n-decyloxybenzoic acid, R =resorcinol and H =hydroquinone) using differential scanning calorimetry. The kinetics experiment is performed from the crystal G phase (kinetophase), which is a common induced phase in both compounds. The molecular mechanism and dimensionality of crystal growth are studied from the Avrami exponent n while the characteristic crystallization time (t*) at each crystallization temperature is deduced from the individual plots of log t vs. ΔH.     

Substituent effect on azobenzene‐based liquid‐crystalline organophosphorus polymers

An Erratum has been published for this article in Journal of Polymer Science Part A: Polymer Chemistry (2003) 41(23) 3862 A new series of combined‐type, azobenzene‐based organophosphorus liquid‐crystalline polymers were synthesized, and their photoisomerization properties were studied. The prepared polymers contained azobenzene units as both the main‐chain and side‐chain mesogens. Various groups were substituted in the terminal of the side‐chain azobenzene mesogen, and the effects of the substituents were investigated. All the polymers were prepared at the ambient temperature by solution polycondensation with various 4‐substituted phenylazo‐4′‐phenyloxyhexylphosphorodichloridates and 4,4′‐bis(6‐hydroxyhexyloxy) azobenzene. The polymers were characterized with gel permeation chromatography, Fourier transform infrared, and ¹H, ¹³C, and ³¹P NMR spectroscopy. Thermogravimetric analysis revealed that all the polymers had high char yields. The liquid‐crystalline behavior of the polymers was examined with hot‐stage optical polarizing microscopy, and all the polymers showed liquid‐crystalline properties. The formation of a mesophase was confirmed by differential scanning calorimetry (DSC). The DSC data suggested that mesophase stability was better for electron‐withdrawing substituents than for halogens and unsubstituted ones. Ultraviolet irradiation studies indicated that the time taken for the completion of photoisomerization depended on the dipolar moment, size, and donor–acceptor characteristics of the terminal substituents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3188–3196, 2003     

Thermochemical properties of Ln(Gly)4Im(ClO4)3·nH2O (Ln = Gd, Tb, Dy, Y)

The enthalpies of dissolution in water of new ternary complexes of four late trivalent lanthanide ions Ln(Gly)₄Im(ClO₄)₃·nH₂O (Ln=Gd, Tb, Dy, Y; Gly: glycine; Im: imidazole and n=1 or 2) were measured by means of a Calvet microcalorimeter. Empirical formulae for the calculation of the enthalpies of dissolution (Δ_dissH), relative apparent molar enthalpies (Δ_dissH (app)), relative partial molar enthalpies (Δ_dissH (partial)) and enthalpies of dilution (Δ_dilH_1,2) were obtained from the experimental data of the enthalpies of dissolution of these complexes. The plot of Δ_dissH_m^Θ, Δ_dissH (app) and Δ_dissH (partial) versus the values of the ionic radius of the lanthanide element (r) showed a grouping effect of the lanthanide elements, indicating that the coordinated bond between the lanthanide ions and the ligands has some covalent character. The unknown value of the standard enthalpy of dissolution for the similar complex: Ho(Gly)₄Im(ClO₄)₃·H₂O was estimated according to the plot of Δ_dissH_m^Θ versus r.     

Short chain copper(II) n-alkanoate liquid crystals

Four short chain members of the copper(II) n-alkanoate series Cu(Cn)₂, from propanoate to hexanoate, have been synthesized, purified and characterized by means of optical microscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), FTIR and Raman spectroscopy. The TGA study shows that decomposition starts on heating above 420-470 K (depending on the sample) in a nitrogen atmosphere. In addition, thermal decomposition was investigated by DSC using special high pressure pans and endo- and exc-thermic processes were found which have not been reported previously. All but one of the compounds melt to a liquid crystal phase, which decomposes before the clearing point. The exception is the propanoate homologue, which decomposes directly from the solid state. Despite this problem of sample decomposition, the identification by optical microscopy of the tetragonal (butanoate) and hexagonal (pentanoate and hexanoate) discotic columnar phases was, for first time, possible by the addition of small amounts of the corresponding acid to the samples. These results are in agreement with the X-ray diffraction study performed using swelled mixtures of these salts with hydrocarbon solvents. Two solid-solid transitions, not previously reported in the literature, were found for the butanoate homologue at 395.9 and 422.9 K with ΔH=8.27 and 1.37 kJ mol^-1, respectively. The solid and liquid crystalline phases were investigated using variable temperature FTIR spectroscopy.     

New low viscosity liquid crystal compounds containing the 2,3,4-trifluorophenyl moiety for active matrix displays

The synthetic route and physical properties for new three-ring derivatives, trans -4- n -alkyl-4'-(2,3,4-trifluorophenyl)bicyclohexanes ( n CCHB3F) with alkyl chain length n from 2 to 5 are presented. They exhibit broad range nematic phases exceeding 40 K, and low viscosity with a low activation enthalpy; they also show low dielectric anisotropies and high birefringence. Their dielectric properties are compared with those of their three-ring homologues with a lateral -NCS group. The Maier-Meier theory is used to evaluate the temperature dependence of the value of 'dielectric anisotropy divided by order parameter ( Δ ε/ S )'. The temperature dependence of Δ ε/ S in several phenylbicyclohexane homologues is explained. Furthermore, the viscosity of nematic liquid crystal mixtures containing these materials is significantly reduced. These mixtures are suitable for the improvement of the switching time of liquid crystal displays using TFT Twisted Nematic (TN) modes.     

Novel photo-crosslinkable liquid crystalline polymers containing vanillylidene cycloalkanones and azobenzene units

Two series of novel liquid crystalline photo-crosslinkable bis(vanillylidene-azobenzene) cycloalkanone containing polymers, namely poly(vanillylidene alkyloxy-4,4'-azobenzenedicarboxylic ester)s, have been synthesised from bis[m-hydroxyalkyloxy(vanillylidene)cycloalkanone] (m = 6, 8, 10) with azobenzene dicarbonylchloride by solution polycondensation method at ambient temperature. Polymers with varying spacer lengths have been synthesised and characterised by spectroscopic techniques. These variations have been correlated with the thermal properties and transition temperatures. Thermal transitions were analysed by differential scanning calorimetry (DSC) and the mesophases were identified by hot stage optical polarised microscopy (HOPM). All of the polymers were found to exhibit liquid crystalline properties. Transition temperatures were observed to decrease with increasing spacer length. The thermogravimetric analysis reveals that all of the polymers were stable up to 280°C undergo two-stage decomposition. Using the UV-visible photolysis studies we investigated the simultaneous behaviour of reactivity rates of crosslinking in the vanillylidene unit and isomerisation caused by the azobenzene unit in the photo-crosslinkable main chain liquid crystalline polymers. The photolysis of liquid crystalline bis(vanillylidene)cycloalkanone-based polymers reveals that there are two kinds of photoreactions in these systems: the EZ photoisomerisation of azobenzene unit and 2p+2p addition by vanillylidene units. The EZ photoisomerisation in the liquid crystal phase disrupts the parallel stacking of the mesogens, resulting in the transition from the liquid crystal phase to isotropic phase. The photoreaction involving 2p+2p addition of the bis(vanillylidene)cycloalkanone units in the polymers results in the conjoining of the chains. The cyclopentanone polymers exhibited a faster rate of photolysis than the cyclohexanone polymers.     

Synthesis and characterization of main chain liquid crystalline ionomers containing sulphonate groups

A series of main chain liquid crystalline ionomers containing sulphonate groups pendent to the polymer backbone were synthesized by an interfacial condensation reaction of 4,4'-bis(1,10-sebacyloxo)benzoic acid, brilliant yellow (BY), and 4,4'-biphenyldiol. 4,4'-Bis(1,10-sebacyloxo)benzoic acid exhibited nematic schlieren texture during heating and cooling. The ionomers are thermotropic liquid crystalline polymers and thermally stable to about 270°C. They exhibit broad mesophase regions over a range of 220°C and the same nematic mesomogen with a colourful thread texture as B₀-LCP, which implies that the introduction of an ionic group did not change the texture of the B₀-LCP. However, the thermotropic liquid crystalline properties were somewhat weakened when the concentration of BY was more than 5%. The inherent viscosity in N,N-dimethylformamide solution suggested that intermolecular associations of sulphonate groups occurred at low concentration, and intermolecular associations predominated at higher concentration.     

Crystalline calcium phenylphosphonate—thermodynamic data on n-alkylmonoamine intercalations

Lamellar crystalline calcium phenylphosphonate, as anhydrous Ca(HO₃PC₆H₅)₂ and hydrated Ca(HO₃PC₆H₅)₂·2H₂O compounds, were used as hosts for intercalation of polar n-alkylmonoamine molecules of the general formula CH₃(CH₂)_nNH₂ (n=0–4, 7) in water or 1,2-dichloroethane. An increase in the interlayer distance was observed. The exothermic enthalpic values for intercalation increased with the number of carbon atoms and with increasing concentration of the amines. The intercalation followed by a titration procedure in the solid/liquid interface with Ca(HO₃PC₆H₅)₂·2H₂O and Ca(HO₃PC₆H₅)₂ gave the enthalpy/number of carbons correlations: Δ_intH=−(1.74±0.43)–(1.30±0.13)n_c and Δ_intH=−(4.15±0.15)–(1.07±0.03)n_c, for water and 1,2-dichloroethane, respectively. A similar correlation Δ_intH=−(4.27±0.80)–(1.85±0.21)n_c was obtained in water by using the ampoule breaking procedure for Ca(HO₃PC₆H₅)₂·2H₂O. The increase in exothermic enthalpic values with the increase in n-aliphatic carbon atoms is more pronounced for the anhydrous compound and also when using the ampoule breaking procedure. The Gibbs free energies are negative. Positive entropic values favor intercalation in these systems.