Interaction of methanol with ruthenium

The interaction of methanol with a clean (110) ruthenium surface has been studied using temperatures programmed desorption methods. Methanol dissociates upon adsorption at 300 K and yields H₂(g) and chemisorbed CO as the dominant products. Randomization of evolved hydrogen was shown to occur during methanol adsorption and also upon subsequent thermal desorption using isotopically labeled methanol, CH₃OD. In addition to hydrogen and CO, small amounts of H₂CO, CH₃OH, CO₂, and H₂O, are also observed upon thermal desorption. In contrast with a previous study of formaldehyde on Ru(110), no detectable CH₄ product is found upon methanol desorption.     

H2-induced CO adsorption and dissociation over Co/Al2O3 catalyst

The activation of adsorbed CO is an important step in CO hydrogenation. The results from TPSR of pre-adsorbed CO with H2 and syngas suggested that the presence of H2 increased the amount of CO adsorption and accelerated CO dissociation. The H2 was adsorbed first, and activated to form H＊ over metal sites, then reacted with carbonaceous species. The oxygen species for CO2 formation in the presence of hydrogen was mostly OH^＊, which reacted with adsorbed CO subsequently via CO^＊＋OH^＊ → CO2^＊＋H^＊; however, the direct CO dissociation was not excluded in CO hydrogenation. The dissociation of C-O bond in the presence of H2 proceeded by a concerted mechanism, which assisted the Boudourd reaction of adsorbed CO on the surface via CO^＊＋2H^＊ → CH^＊＋OH^＊. The formation of the surface species （CH） from adsorbed CO proceeded as indicated with the participation of surface hydrogen, was favored in the initial step of the Fischer-Tropsch synthesis.     

The influence of preadsorbed hydrogen and CO on adsorption of ethylene on the Pd(111) surface

The coadsorption of C₂H₄ with H₂ and CO on Pd(111) has been investigated at 300 and 330 K At 300 K two forms of adsorbed ethylene coexist on the surface in the presence of ethylene gas: a molecular form desorbing as C₂H₄ at 330 K and a dissociatively adsorbed form (giving only hydrogen in desorption spectra) which is stable both in vacuum and in hydrogen at 10^?8 Torr. The molecular form seems to be a precursor state for hydrogenation and for dissociative adsorption. Both processes are controlled by the amount of coadsorbed hydrogen which in turn is controlled by CO coverage.     

Activation of the C-O bond on the surface of palladium: An <Emphasis Type="Italic">In situ</Emphasis> study by X-ray photoelectron spectroscopy and sum frequency generation

An in situ study of the adsorption of CO on atomically smooth and defect Pd(111) surfaces was performed over wide ranges of temperatures (200–400 K) and pressures (10^–6-1 mbar) by X-ray photoelectron spectroscopy and sum frequency generation. Both of the techniques indicated that CO was adsorbed as three-fold hollow, bridging, and terminal species to form well-known ordered structures on the surface. In the course of the in situ experiments, no signs of CO dissociation or of the formation of carbonyl structures (Pd(CO)_n, n > 1) were detected. The mechanism of C-O bond activation in the course of methanol decomposition on the surface of palladium was considered. It was found that the adsorption of methanol on the surface of palladium essentially depends on pressure. Along with the well-known reaction path of methanol dehydrogenation to CO and hydrogen, a slow process of methanol decomposition with C-O bond cleavage was observed at elevated pressures. In this case, the formation of carbon deposits finally resulted in the carbonization and complete deactivation of the surface. A mechanism for C-O bond activation on the surface of palladium was proposed; the geometry of adsorption complexes plays an important role in this mechanism.__________Translated from Kinetika i Kataliz, Vol. 46, No. 2, 2005, pp. 288–301.Original Russian Text Copyright © 2005 by Kaichev, Bukhtiyarov, Rupprechter, Freund.     

Formaldehyde adsorption on the interior and exterior surfaces of CN nanotubes

Using density functional theory, we have investigated the adsorption of formaldehyde (H₂CO) on the interior and exterior walls of a carbon nitride nanotube (CNNT) in terms of energetic, geometric, and electronic properties. It was found that the adsorption is more preferential on the exterior surface of the tube with maximum adsorption energy of ?7.4 kcal/mol. It has also been found that the adsorption energy per molecule is increased by increasing the number of adsorbed molecules. The results reveal that the electronic properties of CNNT are very sensitive to the presence of formaldehyde so that the HOMO/LUMO gap is reduced from 4.02 eV in the free tube to 2.44 eV in the most stable configuration of 3H₂CO/CNNT complex. Also, we have showed that the response of the tube may depend on concentration of the H₂CO molecules, suggesting that the CNNT might produce an electrical signal in the presence of H₂CO molecules.     

Electroreduction of carbon monoxide on palladium electrodeposits in solutions containing copper ions

It is shown that the electroreduction of CO proceeds on electrolytic deposits of palladium (edPd) in 0.5 M H₂SO₄ + (1–5) mM CuSO₄ + CO(sat) solutions at the potentials more positive than the Cu²⁺/Cu equilibrium potential. Among the CO reduction products, methanol and formaldehyde are identified. The current efficiency with respect to CH₃OH exceeds 75% on edPd formed in 1% PdCl₂+0.5 M H₂SO₄ solutions. In addition, Cu⁺ ions, which probably form complexes with CO, are detected in the solution and are assumed to play the role of intermediate species in the mediator catalysis along with copper adatoms.     

Infrared studies of the effect of acetylene, hydrogen, and oxygen on CO adsorption on platinum hydrosols

Infrared spectra of CO-treated platinum hydrosols subsequently treated with acetylene, hydrogen, and oxygen reveal that v(CO)_ads decreases from 2070 cm⁻¹ with increasing gas-treatment time. This has been attributed to a reduction in the coverage of adsorbed CO. In Pt sol/CO/C₂H₂ systems, v(CO)_ads decreases to a limiting value of ca. 2060 cm⁻¹ after exposure to acetylene. In the Pt sol/CO/H₂ systems, v(CO)_ads decreases to ca. 2050 cm⁻¹ after exposure to hydrogen gas. The lower frequency in the Pt sol/CO/H₂ system has been attributed to CO adsorption on more active metal sites formed from the reduction of surface platinum oxides. Exposure of the CO-treated platinum hydrosols to O₂ gas was found to cause the eventual disappearance of the v(CO)_ads band in infrared spectra, which was attributed to oxidation of adsorbed CO to CO₂ by weakly bound surface layers of platinum oxides formed by the oxygen treatment.     

Indoor corrosion of Pb: Effect of formaldehyde concentration and relative humidity investigated by Raman microscopy

In this work the effect of relative humidity (RH) and formaldehyde (H₂CO) concentration on Pb corrosion was investigated; a possible synergism between the aldehyde and CO₂ effects was also considered. Triphasic aqueous salt solutions were used to produce 54% and 75% RH that, together with the 100% RH condition, were combined with 0, 0.62, 55 and 2.0 10² mg m⁻³ formaldehyde concentrations to compose the wanted environments.The results pointed to the conclusion that even at low RH (54%) formates are produced at the metal surface as a consequence of formaldehyde adsorption, indicating that the aldehyde has an active role in Pb corrosion; formates were also observed at relatively low H₂CO concentration (0.62 mg m⁻³). No synergism between formaldehyde and carbon dioxide were observed as demonstrated by the Raman images from a corroded Pb coupon, showing that formate and carbonate contributions to the corrosion products were not spatially related.When compared to other volatile organic compounds (VOCs), formaldehyde harmful effect towards metals is frequently underestimated and the results here reported clearly indicate that, even at low RH, its concentration in indoor environments, where it tends to be produced and accumulated, has to be carefully controlled.     

On the hydrogenation of CO and CO2 over copper/zirconia and palladium/zirconia catalysts

Summary Zirconia-supported hydrogenation catalysts were obtained by activation of the amorphous precursors Cu₇₀Zr₃₀ and Pd₂₅Zr₇₅ under CO₂ hydrogenation conditions. Catalysts of comparable compositions prepared by co-precipitation and wet impregnation of zirconia with copper- and palladium salts, respectively, served as reference materials. The catalyst surfaces under reaction conditions were investigated by diffuse reflectance FTIR spectroscopy. Carbonates, formate, formaldehyde, methylate and methanol were identified as the pivotal surface species. The appearance and surface concentrations of these species were correlated with the presence of CO₂ and CO as reactant gases, and with the formation of either methane or methanol as reaction products. Two major pathways have been identified from the experimental results. i) The reaction of CO₂/H₂-mixtures on Cu/zirconia and Pd/zirconia primarily yields surface formate, which is hydrogenated to methane without further observable intermediates. ii) The catalytic reaction between CO and hydrogen yields -bonded formaldehyde, which is subsequently reduced to methylate and methanol. Interestingly, there is no observable correlation between absorbed formaldehyde or methylate on the one hand, and gas phase methane on the other hand. The reactants, CO₂ and CO, can be interconverted catalytically by the water gas shift reaction. The influence of the metals on this system of coupled reactions gives rise to different product selectivities in CO₂ hydrogenation reactions. On zirconia-supported palladium catalysts, surface formate is efficiently reduced to methane, which consequently appears to be the principal CO₂ hydrogenation product. In contrast, there is a favorable reaction pathway on copper in which CO is reduced to methanol without C-O bond cleavage; surface formate does not participate significantly in this reaction. In CO₂ hydrogenations on copper/zirconia, methanol can be obtained as the main product, from a sequence of the reverse water gas shift reaction followed by CO reduction.     

In situ FTIR studies on the effect of temperature on the electro-oxidation of small organic molecules at the Ru(0001) electrode

The adsorption and electro-oxidation of formaldehyde, formic acid and methanol at the Ru(0001) electrode in perchloric acid solution have been studied as a function of temperature, potential and time using in situ FTIR spectroscopy, and the results interpreted in terms of the surface chemistry of the Ru(000 1) electrode and compared to those obtained during our previous studies on the adsorption of CO under the same conditions. It was found that no dissociative adsorption or electro-oxidation of methanol takes place at Ru(0001) at potentials < 900 mV vs. Ag/AgCl, and at all three temperatures employed, 10, 25 and 50 degrees C. However, both formaldehyde and formic acid did undergo dissociative adsorption, even at -200 mV, to form linear (CO(L)) and 3-fold-hollow (COH) binding CO adsorbates. In contrast to the adsorption of CO, it was found that increasing the temperature to 50 degrees C markedly increased the amount of CO adsorbates formed on the Ru(0001) surface from the adsorption of both formaldehyde and formic acid. On increasing the potential, the electro-oxidation of the CO adsorbates to CO2 took place via reaction with the active (1 x 1)-O oxide. Formic acid was detected as a partial oxidation product during formaldehyde electro-oxidation. At all three temperatures employed, it was found that adsorbed CO species were formed from the adsorption of both formic acid and formaldehyde, and were oxidised to CO2 faster than was observed in the experiments involving CO adsorbed from CO(g), suggesting a higher mobility of the CO adsorbates formed from the adsorption of the HCOOH and HCHO. At potentials > 1000 mV, both the oxidation of formic acid to CO2 and the oxidation of formaldehyde to both CO2 and formic acid were significantly increased, and the oxidation of methanol to CO2 and methyl formate was observed, all of which were attributed to the formation of an active RuO2 phase on the Ru(0001) surface.     

Methanol adsorption on γ-irradiated SiO2 surface

The adsorption of methanol on γ-irradiated and un-irradiated SiO₂ surfaces pretreated at 473 K was investigated by Fourier transform infrared spectroscopy, temperature programmed desorption (TPD) and pulse methods. Methanol adsorbed only in molecular form on the un-irradiated sample. Treating the pre-irradiated silica surface with methanol at room temperature formaldehyde and hydrogen were formed. The methanol adsorbed on the irradiated silica transformed to formyl groups during a longer time at room temperature and desorbed as formaldehyde simultaneously with CH₃OH (T_max=395 K) on the TPD.     

The interaction of hydrogen and carbon monoxide on Cu-Ni (110) single-crystal surfaces

The co-adsorption of H₂ and CO on a Cu-Ni (110) surface was studied by thermal desorption spectroscopy (TDS) and ultraviolet photoemission spectroscopy (UPS). Strong interactions between adsorbed CO and hydrogen observed in the CO desorption spectrum and CO valence emissions were attributed to a blockage of certain CO adsorption sites by hydrogen.     

Purification of Hydrogen from CO with Cu/ZSM-5 Adsorbents

The transition to a hydrogen economy requires the development of cost-effective methods for purifying hydrogen from CO. In this study, we explore the possibilities of Cu/ZSM-5 as an adsorbent for this purpose. Samples obtained by cation exchange from aqueous solution (AE) and solid-state exchange with CuCl (SE) were characterized by in situ EPR and FTIR, H₂-TPR, CO-TPD, etc. The AE samples possess mainly isolated Cu²⁺ cations not adsorbing CO. Reduction generates Cu⁺ sites demonstrating different affinity to CO, with the strongest centres desorbing CO at about 350 °C. The SE samples have about twice higher Cu/Al ratios, as one H⁺ is exchanged with one Cu⁺ cation. Although some of the introduced Cu⁺ sites are oxidized to Cu²⁺ upon contact with air, they easily recover their original oxidation state after thermal treatment in vacuum or under inert gas stream. In addition, these Cu⁺ centres regenerate at relatively low temperatures. It is important that water does not block the CO adsorption sites because of the formation of Cu⁺(CO)(H₂O)_x complexes. Dynamic adsorption studies show that Cu/ZSM-5 selectively adsorbs CO in the presence of hydrogen. The results indicate that the SE samples are very perspective materials for purification of H₂ from CO.     

Mechanism of CO oxidation in excess H2 over CuO/CeO2 catalysts: ESR and TPD studies

The oxidation of CO with oxygen over (0.25–6.4)% CuO/CeO₂ catalysts in excess H₂ is studied. CO conversion increases and the temperature range of the reaction decreases by 100 K as the CuO content is raised. The maximal CO conversion, 98.5%, is achieved on 6.4% CuO/CeO₂ at 150°C. At T > 150°C, the CO conversion decreases as a result of the deactivation of part of the active sites because of the dissociative adsorption of hydrogen. CO is efficiently adsorbed on the oxidized catalyst to form CO-Cu⁺ carbonyls on Cu₂O clusters and is oxidized by the oxygen of these clusters, whereas it is neither adsorbed nor oxidized on Cu⁰ of the reduced catalysts. The activity of the catalysts is recovered after the dissociative adsorption of O₂ on Cu⁰ at T ～ 150°C. The activation energies of CO, CO₂, and H₂O desorption are estimated, and the activation energy of CO adsorption yielding CO-Cu⁺ carbonyls is calculated in the framework of the Langmuir-Hinshelwood model.     

Mechanism of methanol conversion on ZrO<Subscript>2</Subscript> and 5% Cu/ZrO<Subscript>2</Subscript> according to in situ IR spectroscopic data

It is demonstrated by in situ IR spectroscopy that, in methanol conversion on ZrO₂ and 5% Cu/ZrO₂ catalysts, methoxy groups are present on the catalyst surface, which result from O-H or C-O bond breaking in the methanol molecule. Two types of formate complexes, localized on ZrO₂ and CuO, are also observed. The formate complexes form via the oxidative conversion of the methoxy groups. There are two types of linear methoxy groups. First-type linear methoxy groups condense with the formate complex located on CuO to yield methyl formate and then CO and H₂. Second-type methoxy groups appear as intermediate products in the formation of dimethyl ether. The main hydrogen formation reactions are the recombination of hydrogen atoms (which result from the interconversion of surface complexes) on copper clusters and the decomposition of methyl formate. The source of CO₂ in the gas phase is the formate complex, and the source of CO is methyl formate. The effect of water vapor and oxygen the surface reactions and product formation is discussed.     

Photoluminescence and FT-IR studies of the dissociative adsorption of H2 on the active ZrO2 catalyst and its role in the hydrogenation of CO

Photoluminescence and FT-IR studies of the adsorption of H₂ on ZrO₂ catalysts have been performdd to clarify the true natuee of active surface sites for the activaiion of H₂ in connection with the CO — H₂ reaction on the catalyst. The results indicate that the coordinatively unsaturated surface sites with different coordination numbers are generated on the surfaces by evacuation at temperatures higher than 600 K. These surface sites of lower coordination play a significant role in the reversible and irreversible dissociative adsorption of H₂ on the active ZrO₂ catalyst. The former seems to act as active hydrogen species for the CO — H₂ reaction to form branched hydrocarbons on the ZrO₂ catalyst.     

Effect of hydrogen gas impurities on the hydrogen dissociation on iron surface

A small addition of oxygen to hydrogen gas is known to mitigate the hydrogen embrittlement (HE) of steels. As atomic hydrogen dissolution in steels is responsible for embrittlement, catalysis of molecular hydrogen dissociation by the steel surface is an essential step in the embrittlement process. The most probable role of oxygen in mitigating HE is to inhibit the reactions between molecular hydrogen and the steel surface. To elucidate the mechanism of such surface reaction of hydrogen with the steel in the presence of oxygen, hydrogen, and oxygen adsorption, dissociation, and coadsorption on the Fe(100) surface were investigated using density functional theory. The results show that traces of O₂ would successfully compete with H₂ for surface adsorption sites due to the grater attractive force acting on the O₂ molecule compared to H₂. The H₂ dissociation would be hindered on iron surfaces with predissociated oxygen. Prompted by the notable results for H₂ + O₂, other practical systems were considered, that is, H₂ + CO and CH₄. Calculations were performed for the CO chemisorption and H₂ dissociation on iron surface with predissociated CO, as well as, CH₄ surface dissociation. The results indicate that CO inhibition of H₂ dissociation proceeds via similar mechanism to O₂ induced inhibition, whereas CH₄ traces in the H₂ gas have no effect on H₂ dissociation. © 2014 Wiley Periodicals, Inc.     

Steam reforming of dimethoxymethane,methanol and dimethyl ether on CuO–ZnO/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst

The performance of a СuO–ZnO/γ-Al₂O₃ catalyst for the reactions of methanol, dimethyl ether (DME) and dimethoxymethane (DMM) steam reforming (SR) to hydrogen-rich gas was studied. The catalyst was found to be active and selective for methanol and DMM SR producing hydrogen-rich gas with low content of CO (<1 vol %). It provided complete conversion of methanol and DMM at 300°C, and hydrogen productivity of, respectively, 15 and 16.5 L_H2g _cat ^-1 h^-1. With the use of physicochemical methods and catalytic experiments, it was shown that the catalyst surface contained the acid sites typical for γ-Al₂O₃, and CuO–ZnO agglomerates, responsible, respectively, for DMM hydration to methanol and formaldehyde, and SR of these compounds to hydrogen-rich gas.     

CuMgAlO_x复合氧化物催化甲醇乙醇Guerbet反应:M~(2+)/Al~(3+)比的影响

以类水滑石为前驱体,通过调控M~(2+)/Al~(3+)比制备了系列具有不同表面性质的MgAlO_x(MA)和CuMgAlO_x(CMA)催化剂,并分别应用于甲醛乙醛缩合反应(甲醇乙醇Guerbet反应的第二步反应)和甲醇乙醇Guerbet反应。采用NH_3/CO_2-TPD、XPS、H_2-TPR和H_2-TPD技术对催化剂表面酸碱性以及铜物种的性质进行了表征。结果表明,甲醇乙醇Guerbet反应性能与催化剂表面Cu~0比表面积和中强碱数目有关,提高Cu~0比表面积有利于甲醇乙醇脱氢生成甲醛和乙醛,增强中强碱数目能促进甲醛乙醛缩合反应。     

Insertion reactions of metal carbonyl anions with methyl formate in the gas phase as revealed by 13C- and D-labeling

School of Chemistry, University of New South Wales, Kensington, Australia Institute of Mass Spectrometry, University of Amsterdam, Nieuwe Achtergracht The gas-phase reactions of coordinatively unsaturated metal carbonyl anions (M(CO) _n ^? , M=Cr, Mn, Fe, Co; n=0-3 and Co(CO)_nNO^?, n=0-2) with unlabeled and D- and ¹³C-labeled methyl formate have been studied with Fourier transform ion cyclotron resonance mass spectrometry. The reactions proceed in most instances by loss of one or more CO molecules from the collision complex. In the reactions of the dicarbonyl and tricarbonyl anions with H¹³COOCH₃, part of the eliminated carbon monoxide molecules contain the label revealing the occurrence of initial insertion of the metal center into the bonds adjacent to the carbonyl function of the substrate with formation of five- or six-coordinate intermediates, respectively. In addition, the MnCCO) ₃ ^? , Fe(CO) ₂ ^? , and CoCCO) ₂ ^? ions react by the loss of methanol and a [C,H₂,O] neutral species. The D- and ¹³C-labeling show that methanol is expelled in a reductive elimination from a five- or six-coordinate species, whereas the [C,H₂,O] loss is a more complex process possibly involving the competing losses of formaldehyde and CO + H₂. In the reaction of Fe(CO) ₃ ^? with H ₁₃ ¹³ COOCH₃, a facile consecutive exchange of all three CO ligands of the reactant ion for ¹³CO is observed. This novel reaction appears to involve initial insertion into the H¹³CO—OCH₃-bond followed by facile hydrogen shifts from the formyl ligand to a CO Hgand prior to the loss of unlabeled methyl formate.