Controlling both ground- and excited-state thermal barriers to Bergman cyclization with alkyne termini substitution

The cross-coupling reaction of 2,3-dibromo-5,10,15,20-tetraphenylporphyrin with corresponding organostannanes in the presence of a Pd0 catalyst in THF at reflux temperature yields free base 2,3-dialkynylporphyrins 1a,c-e. The subsequent deprotection of trimethylsilyl group of 1a with TBAF in THF under aqueous conditions produces the 2,3-diethynyl-5,10,15,20-tetraphenylporphyrins 1b in 87% yield. Compounds 1a-d undergo zinc insertion upon treatment with Zn(OAc)2.2H2O in CHCl3/MeOH to give zinc(II) 2,3-dialkynyl-5,10,15,20-tetraphenylporphyrins (2a-d) in 70-92% yields. Thermal Bergman cyclization of 1a-e and 2a-d was studied in chlorobenzene and approximately 35-fold 1,4-cyclohexadiene at 120-210 degrees C. Compounds 1b and 2b with R = H react at lower temperature (120 degrees C) and produce cyclized products 3b and 4b in higher yields (65-70%) than their propyl, isopropyl, and phenyl analogues, with R = Ph being the most stable. Continuing in this trend, the -TMS derivatives 1a and 2a exhibit no reactivity even after heating at 190 degrees C in chlorobenzene/CHD for 24 h. Photolysis (at lambda >/= 395 nm) of 1b and 2b at 10 degrees C leads the formation of isolable picenoporphyrin products in 15 and 35% yields, respectively, in 72 h, whereas these compounds are stable in solution under same reaction conditions at 25 degrees C in the dark. Unlike thermolysis at 125 degrees C, which did not yield Bergman cyclized product for R = Ph, photolysis generated very small amounts of picenoporphyrin products (3c: 5%; 4c: 8% based on 1H NMR) as well as a mixture of reduced porphyrin products that were not separable. Thus, trends in the barrier to Bergman cyclization in the excited state exhibit the same trend as those observed in the ground state as a function of R-group. Finally, photolysis of 2b at 10 degrees C with lambda >/= 515 or 590 nm in benzene/iPrOH (4:1, 72 h) produces 4b in 15 and 6% isolated yields, indicating that conjugation of the enediyne unit into the porphyrin electronic transitions leads to sufficient distortion to generate photoproduct even with long wavelength excitation.     

An efficient route for synthesis of 5,6‐diphenylimidazo‐[2,1‐b]thiazoles as antibacterial agents

The reaction of 4,5‐diphenylimidazol‐2‐thione ( 1 ) with aromatic ketones 2a‐i using the acidified acetic acid method afforded the 4,5‐diphenyl(2‐imidazolylthio)acetophenones 3a‐h in good yields. While, the cyclized product 4i was obtained directly upon reaction of 1 with α‐acetyl naphthalene. Compounds 3a‐h were cyclized directly to the corresponding 3‐aryl‐5,6‐diphenylimidazo[2,1‐b]thiazoles (4a‐c) and ( 4e‐h ). In the same manner the reaction of 1 with aliphatic and/or alicyclic ketones gave the 3‐(4,5‐diphenyl‐2‐imidazolylthio)acetone derivatives 5a‐d , 2‐(4,5‐diphenylimidazolylthio)cycloalkanones 8a,d and the tricyclic compounds 9b‐c respectively. The cyclized compounds 6a‐d and 9a,d were obtained by cyclization of 5a‐d and 8a,b respectively. Oxidation of 1 gives the corresponding bis(4,5‐diphenyl‐2‐imidazolyl)‐disulfide ( 10 ) in 90% yield. Some of the synthesized compounds were tested for antifungal and antibacterial activity.     

Syntheses of aporphine and homoaporphine alkaloids by intramolecular ortho-arylation of phenols with aryl halides via SRN1 reactions in liquid ammonia

The photostimulated intramolecular ortho-arylation reactions of bromoarenes linked with pendant phenoxy containing N-substituted tetrahydroisoquinolines in liquid ammonia afforded aporphine (54-82% yield) alkaloid derivatives via SRN1 reactions. This strategy was extended for the first time to the synthesis of a homoaporphine derivative (40% yield). Tetrahydroisoquinoline precursors that contained electron-withdrawing groups on nitrogen (i.e., amides, sulfonamides, and carbamates) gave cyclized products, whereas precursors with basic nitrogens (i.e., NH or NMe) either failed to yield cyclized products or gave aporphines in only low yield.     

PTC‐Promoted Japp–Klingmann Reaction for the Synthesis of Indole Derivatives

Abstract

Indole derivatives have been efficiently synthesized from ethyl 2‐phenylhydrazono‐5‐phthalimido‐pentanoate and its derivatives, which were obtained by Japp–Klingmann reaction under phase‐transfer catalytic (PTC) conditions. Several different phase‐transfer catalysts were investigated and dimethyldioctadecyl ammonium chloride (DMDOA) was found to promote this reaction efficiently. Using DMDOA as the PTC, aryl hydrazones were obtained in yields of 90%. The pure aryl hydrazones were then efficiently cyclized to indole derivatives in yields of more than 80%.     

Cyclizing Radical Carboiodination,Carbotelluration, and Carboaminoxylation of Aryl Amines

Radical carboiodination of various aryl amines is reported. Aryl diazonium salts, generated in situ from the corresponding aryl amines, are reacted with Bu₄NI to provide the corresponding aryl radicals which undergo 5‐exo or 6‐exo cyclization. Iodine abstraction eventually affords the carboiodinated products in good to excellent yields. If TEMPO is added, the cascade provides the cyclized carboaminoxylation products. Running the reaction in the presence of PhTeTePh affords the phenyltellurated cyclized products.     

Formation of grignard reagents from aryl halides: effective radical probes hint at a nonparticipation of dianions in the mechanism

We have prepared highly efficient radical probes 2a-b involving the hex-5-enyl rearrangement. The reaction of 2a-b with active magnesium leads to the cyclized products 4a-b, providing a direct evidence of radical intermediates during the formation of aryl Grignard reagents. The variations of yields for cyclized products 4a-b as a function of structural modifications in 2a-b suggest that the intervention of dianions is not necessary to explain the observed results.     

Palladium-catalyzed heteroannulation leading to heterocyclic structures with two heteroatoms: a highly regio- and stereoselective synthesis of (Z)-4-alkyl-2-alkyl(aryl)idene-3,4-dihydro-2H-1,4-benzoxazines and (Z)-3-alkyl(aryl)idene-4-tosyl-3,4-dihydro-2H-1,4-benzoxazines.

A highly convenient method has been developed for the synthesis of (Z)-4-alkyl-2-alkyl(aryl)idene-3,4-dihydro-2H-1,4-benzoxazines 9 and (Z)-3-alkyl(aryl)idene-4-tosyl-3,4-dihydro-2H-1,4-benzoxazines 34-38 through palladium-copper-catalyzed reactions. Aryl halides 7 reacted with 2-[N-alkyl(benzyl)-N-prop-2'-ynyl]aminophenyl tosylate 6 in the presence of (PPh3)2PdCl2 (3 mol %), CuI(5 mol %) in triethylamine at room temperature to yield 2-[N-alkyl(benzyl)-N-(3-aryl-prop-2'-ynyl)]-aminophenyl tosylates 8 in extremely good yields (72-96%). The latter could then be cyclized with KOH in ethanol-water to Z-9 in a highly regio- and stereoselective manner. Similarly, palladium-copper-catalyzed reaction of 2-(prop-2'-ynyloxy)aniline (21) with aryl iodides 7 led to 22-26 which after tosylation and cyclization with cuprous iodide in CH3CN in the presence of K2CO3 and Bu4-NBr led to the (Z)-3-alkyl(aryl)idene-4-tosyl 3,4-dihydro-2H-1,4-benzoxazines 34-38 in good overall yields. The Z-stereochemistry of the products was established from 1H NMR spectra, 3JCH values (between vinylic proton and methylenic carbon of the heterocyclic ring), NOE experiments, and X-ray analysis. The method was also found to be suitable for the synthesis of bis(benzoxazinylated) derivatives 17, 39, and 2-alkyl-3,4-dihydro-2H-1,4-benzoxazines 18. Our method for the synthesis of 3,4-dihydro-2H-1,4-benzoxazines is highly efficacious, using easily available starting materials under very mild conditions. Also the synthesis of some novel 5-substituted uracil derivatives 40 and 41 containing the benzoxazinyl moiety and of potential biological interest is being reported.     

Palladium-catalyzed aminoallylation of activated olefins with allylic halides and phthalimide

The three-component aminoallylation reaction of the activated olefins 2 with the phthalimide 1a and allyl chloride proceeded very smoothly in the presence of Pd(2)dba(3).CHCl(3) (5 mol %)/P(4-FC(6)H(4))(3) (40 mol %) and Cs(2)CO(3) (3 equiv against 2) in dichloromethane at room temperature to give the corresponding aminoallylated products, N-pent-4-enylphthalimides 3, in 58-99% yields. The reaction of oxazolidinone 1b also proceeded very smoothly to give N-(2,2-dicyano-1-phenylpent-4-enyl)oxazolidinone in a quantitative yield; however, the Tsuji-Trost-type allylation products 4 were obtained in the case of dibenzylamine, N-tosylaniline, and pyrrolidin-2-one. Further, 2 underwent cycloaddition with N-tosylvinylaziridine 9a in the presence of Pd(2)dba(3).CHCl(3) (5 mol %)/P(4-FC(6)H(4))(3) (40 mol %) in THF at room temperature, giving the corresponding pyrrolidines 11 in 69-99% yields.     

Quantum yields of the initiation step and chain propagation turnovers in S(RN)1 reactions: photostimulated reaction of 1-iodo-2-methyl-2-phenyl propane with carbanions in DMSO

Neophyl radicals were generated by photoinduced electron transfer (PET) from a suitable donor to the neophyl iodide (1, 1-iodo-2-methyl-2-phenylpropane). The PET reaction of 1 with the enolate anion of cyclohexenone (2) afforded mainly the reduction products tert-butylbenzene (5) and the rearranged isobutylbenzene (6), arising from hydrogen abstraction of the neophyl radical (15) and the rearranged radical 16 intermediates, respectively. The photostimulated reaction of 1 with 2 in the presence of di-tert-butylnitroxide, as a radical trap, afforded adduct 10 in 57% yield. The photoinduced reaction of the enolate anion of acetophenone (3) with 1 gave the substitution products 11 (50%) and 12 (16%), which arise from the coupling of 3 with radicals 15 and 16, respectively. The rate constant obtained for the addition of anion 3 to radical 15 was 1.2 x 10(5) M(-)(1) s(-)(1), by the use of the rearrangement of this radical as a clock reaction. The anion of nitromethane (4) was almost unreactive at the initiation step, but in the presence of 2 under irradiation, it gave high yields (67%) of the substitution product 13 and only 2% of the rearranged product 14. When the ratio of 4 to 1 was diminished, it was possible to observe both substitution products 13 and 14 in 16% and 6.4% yields, respectively. These last results allowed us to estimate the coupling rate constant of neophyl radicals 15 with anion 4 to be at least of the order of 10(6) M(-)(1) s(-)(1). Although the overall quantum yield determined (lambda = 350 nm) for the studied reactions is below 1, the chain lengths (Phi(propagation)) for the reaction of 1 with anions 3 and 4 are 127 and 2, respectively.     

Reduction of inner sulfonium salts, thioethers, and sulfones derived from closo-[B12H12]2- by lithium in methylamine: a new route to mercaptododecaborates

Anions [Me2SB12H11]- (2) and [MeSB12H11]2- (3) can be reduced by excess lithium in methylamine at -15 degrees C to yield [HSB12H11]2- (1) after workup. Such behavior toward this reducing system is similar to that of alkyl aryl sulfides. The sulfone [MeSO2B12H11]2- (12) also yields 1 as a major boron product upon reduction, while alkyl aryl sulfones produce the corresponding arenes under the same conditions. Similarly, isomers of (Me2S)2B12H10 (4-6) are reduced by lithium in methylamine yielding dithiols [(HS)2B12H10]2- (7-9). The tetrabutylammonium salts of 1 and 7-9 are obtained in 80-90% yields and characterized by multinuclear NMR and mass spectrometry, the latter three compounds being isolated and characterized for the first time. The reduction reaction provides access to dithiols 7-9 for biological evaluation and use in synthesis. Thus, 2 and 4-6 can be easily converted to [R2SB12H11]- and (R2S)2B12H10 in a two-step reduction-alkylation procedure. 1,2-(Bn2S)2B12H10 (13) obtained by alkylation of the reduction product of 4 by benzyl chloride was characterized by single-crystal X-ray diffraction analysis. Crystal data for 1,2-(Bn2S)2B12H10.CD3CN: C2/c (No. 15), a = 13.666(1) A, b = 16.978(1) A, c = 14.667(1) A, beta = 91.08(1) degrees, Z = 4.     

乙二醇中钯催化无配体的室温Suzuki反应

报道了一种在室温下醋酸钯催化乙二醇中无外加配体的Suzuki反应体系.以K3PO4·7H2O为碱,在该体系中可高效进行芳基溴代物和芳基硼酸的Suzuki交叉偶联反应,具有反应条件温和、无需惰性气体保护等特点.在n(ArBr)=0.5mmol,n(ArB(OH)2)=0.75mmol,x(Pd(OAc)2)=0.5mol%,n(K3PO4·7H2O)=1.0mmol,v(乙二醇)=2ml的优化条件下,4-溴苯甲醚和苯硼酸反应20min,分离收率即达95%.     

Imine insertion into a late metal-carbon bond to form a stable amido complex

An arylrhodium(I) complex containing a labile dative ligand was prepared, and its reactivity toward aryl imines was investigated. The arylrhodium(I) complex (DPPE)Rh(C5H5N)(p-tol), 2, was isolated in 65% yield from [(DPPE)Rh(mu-Cl)]2, pyridine, and p-tolyllithium. Reaction of 2 with the aldimine (p-tol)CH=N(C6H4-p-CO2Me) (3a-Tol) gave the Rh amide insertion product 4 in 88% isolated yield. The solid-state structure of 4 was determined by single-crystal X-ray diffraction. The reaction of 2 with the electron-neutral and electron-rich aldimines (Ph)CH=NPh (3b) and (p-tol)CH=N(C6H4-p-OMe) (3c) also appeared to involve insertion, but the amido complexes formed from these insertions were not stable. Thus, reaction of 2 with 3b, followed by addition of Et3NHCl, gave the amine and ketimine products (Ph)(p-tol)CH-NHPh, 5, and (p-tol)(Ph)C=N(Ph), 6, in 25% and 50% yields. Several lines of data indicate that these products are formed by a sequence of transformations involving insertion of imine to give a Rh amide intermediate, beta-hydrogen elimination, cyclometalation to form a bound imine and H2, and protonolysis of the metallacycle upon addition of Et3NHCl. Consistent with this proposal, the proposed metallacycle containing the ortho-metalated ketimine ligand (p-tol)2C=N(C6H4-p-OMe) was isolated and characterized by single-crystal X-ray diffraction.     

A novel approach to the synthesis of 6-substituted uracils in three-step, one-pot reactions

From the commercial 6-chloro-2,4-dimethoxypyrimidine (1) and by a photostimulated reaction with Me(3)Sn(-) ions, 2,4-dimethoxy-6-(trimethylstannyl)pyrimidine (2) was obtained in 95% yield. By the cross-coupling reaction of 2 with 1-iodonaphthalene as electrophile catalyzed by Pd (Stille reaction), 2,4-dimethoxy-6-(naphthalen-1-yl)pyrimidine (9) was obtained in 76% yield. By hydrolysis of 9, 6-(1-naphthyl)uracil was obtained in 98% of isolated yield. When the three steps (S(RN)1 reaction-cross coupling reaction-hydrolysis) were performed in a one-pot reaction, 6-substituted uracils (1-naphthyl, 4-chlorophenyl, 3-chlorophenyl, 2,3,4,5,6-pentafluorophenyl) were obtained (43-57%) of isolated pure products. When the electrophile was a benzoyl chloride, 6-benzoyl uracil (54%) and 6-(2-chlorobenzoyl) uracil (49%) were obtained in isolated pure products.     

Competitive intramolecular carbenoid reactions of pyrrole derivatives

Rhodium(II) acetate-catalyzed decomposition of 1-diazo-3-phenyl-4-(pyrrol-1-yl)-butan-2-one and its p-methoxy derivative resulted in their intramolecular cyclization to form the 6-phenyl-5,6-dihydroindolizin-7(8H)-ones and 1-(pyrrol-1-yl)methylindan-3-ones as major and minor products respectively in high yields (77–89%). The p-nitrophenyldiazo compound cyclized exclusively to the 5,6-dihydroindolizin-7(8H)-one in 76% yield.     

Fluorescent quenching of the 2-naphthoxide anion by aliphatic and aromatic halides. Mechanism and consequences of electron transfer reactions

The fluorescent excited state of the 2-naphthoxide ion (1) is quenched by aliphatic and aromatic halides according to an electron-transfer mechanism, with generation of the corresponding alkyl and aryl radicals by a concerted or consecutive C-X bond fragmentation reaction. Whereas bromo- and iodobenzene follow a concerted ET mechanism (C-X, BDE control), 1-bromonaphthalene exhibits a stepwise process (pi LUMO control). The photoinduced reaction of anion 1 with 1-iodoadamantane (2) in DMSO affords substitution products on C3, C6, and C8, 1-adamantanol, 1-adamantyl 2-naphthyl ether, and adamantane (3.2, 13.2, 12.2, 2.8, 2.5, and 14.1% yields, respectively). A complex mixture is also observed in the photochemical reaction of neopentyl iodide (3) with anion 1, which renders substitution on C1, C3, C6, C8, and 2-naphthyl neopentyl ether (8.1, 1.3, 19.1, 31.1, and 2.8% yields, respectively). The absence of reaction in the dark and the inhibition of the photoinduced reaction by the presence of the radical traps di-tert-butylnitroxide (DTBN) and 1,4-cyclohexadiene are evidence of a radical chain mechanism for these substitutions. On the other hand, only coupling at C1 is achieved by the photostimulated reaction of anion 1 with iodobenzene (5), to afford 41.9% of 1-phenyl-2-naphthol and 5.4% of disubstitution product. The regiochemistry of these reactions can be ascribed to steric hindrance and activation parameters.     

Novel and convenient routes to substituted pyrroles and imidazoles

S-Melhyl N-(benzotriazol-1-ylmethyl)thioimidate 6 is obtained by lithiation of the corresponding N-(benzotriazol-1-ylmelhyl) thioamide 5 and subsequent reaction with methyl iodide. Derivative 6 undergoes [2 + 3] cycloaddition reactions with ,β-unsaturated -esters, -ketones and -nitriles, and vinylpyridines which are followed by elimination of benzotriazole and the thioalkoxy group, to give 2,3,4-trisubstituted pyrroles. Lithiaiion of 6 followed by reactions with imines gives cyclized 4,5-dihydroimidazoles 14 which upon further treatment with ZnBr₂ or direct refluxing in toluene yield the 1,25-trisubstituted imidazoles 15 in good yields.     

Frustrated beta-chloride elimination. Selective arene alkylation by alpha-chloronorbornene catalyzed by electrophilic metallocenium ion pairs

Single-site polymerization catalysts generated in situ via activation of Cp*MMe(3) (Cp* = C(5)Me(5); M = Ti, Zr), (CGC)MMe(2) (CGC = C(5)Me(4)SiMe(2)NBu(t)(); M = Ti, Zr), and Cp(2)ZrMe(2) with Ph(3)C(+)B(C(6)F(5))(4)(-) catalyze alkylation of aromatic molecules (benzene, toluene) with alpha-chloronorbornene at room temperature, to regioselectively afford the 1:1 addition products exo-1-chloro-2-arylnorbornane (aryl = C(6)H(5) (1a), C(6)H(4)CH(3) (1b)) in good yields. Analogous deuterium-labeled products exo-1-chloro-2-aryl-d(n)-norbornane-7-d(1) (aryl-d(n) = C(6)D(5) (1a-d(6)), C(6)D(4)CD(3) (1b-d(8))) are obtained via catalytic arylation of alpha-chloronorbornene in either benzene-d(6) or toluene-d(8). Isolated ion-pair complexes such as (CGC)ZrMe(toluene)(+)B(C(6)F(5))(4)(-) and Cp(2)ThMe(+)B(C(6)F(5))(4)(-) also catalyze the reaction of alpha-chloronorbornene in toluene-d(8) to give 1b-d(8) in good yields, respectively. Small quantities of the corresponding bis(1-chloronorbornyl)aromatics 2 are also obtained from preparative-scale reactions. These reactions exhibit turnover frequencies exceeding 120 h(-1) (for the Cp*TiMe(3)/Ph(3)C(+)B(C(6)F(5))(4)(-)-catalyzed system), and chlorine-free products are not observed. Compounds 1 and 2 were characterized by (1)H, (2)H, (13)C, and 2D NMR, GC-MS, and elemental analysis. The aryl group exo-stereochemistry in 1a and 1b is established using (1)H-(1)H COSY, (1)H-(13)C HMBC, and (1)H-(1)H NOESY NMR, and is further corroborated by X-ray analysis of the product 1,4-bis(exo-1-chloro-2-norbornyl)benzene (2a). Control experiments and reactivity studies on each component step suggest a mechanism involving participitation of the metal electrophiles in the catalytic cycle.     

Synthesis of pyridin-2(1H)-one derivatives via enamine cyclization

The nucleophilic vinylic substitution reaction of the aliphatic enaminone 3-dimethylamino-2-formyl acrylonitrile 1 with the nucleophiles malononitrile and ethyl cyanoacetate produced the two unusual reaction adducts 3a and 3b in good to moderate yield under milder reaction conditions. Upon reaction with aromatic amines, these adducts yielded enamines 4 and 5, which eventually cyclized in the presence of base to produce the novel pyridin-2(1H)-one derivatives 8 and 9.     

How do analogous alpha-chloroenamides and alpha-iodoenamides give different product distributions in 5-endo radical cyclizations?

5-Endo cyclizations of N-alkenyl carbamoylmethyl radicals provide gamma-lactam radicals, which in turn evolve to reduced or non-reduced (alkene) products depending on reagents and reaction conditions. Several groups have made surprising observations that chlorides are better radical precursors than iodides in such cyclizations. Here is described a detailed study of tin and silicon hydride-mediated radical cyclizations of N-benzyl-2-halo-N-cyclohex-1-enylacetamides. The ratios of directly reduced, cyclized/reduced, and cyclized/non-reduced products depend not only on the reaction conditions and reducing reagent but also on the precursor. Prior explanations for the precursor-dependent product ratios based on amide rotamer effects are ruled out. The precursor-dependent behavior is further dissected into two different effects: (1) the ratio of cyclized/reduced products to cyclized/non-reduced products depends on the ability of the radical precursor to react with the product gamma-lactam radical in competition with tin hydride (iodides can compete, chlorides cannot), and (2) the occurrence of large amounts of directly reduced (noncyclized) products in the case of iodides is attributed to a competing ionic chain reaction by which the precursor is reductively deiodinated with HI. This side reaction is not available to chlorides, thereby explaining why the chlorides are better precursors in such reactions. The ability of the iodides to provide cyclized products can be largely restored by adding base. The chlorides and iodides then become complementary precursors, with chlorides giving largely cyclized/reduced products and iodides giving largely cyclized/non-reduced products.     

Carbonylative cross-coupling reaction of ethynylstibane with aryl iodides

Palladium-catalyzed carbonylative cross-coupling reaction of ethynylstibane (PhSbPh(2)) and aryl iodides (Ar-I) is described. The reaction of the stibanes and the halides under 1 atm of carbon monoxide in N,N-dimethylacetamide using a combination of 5 mol% Pd(OAc)(2) and 4 equivalents (20 mol%) of PPh(3) brought about carbonylative cross-coupling reaction to afford arylethynylketones [ArC(O)Ph] in good yields along with a small amount of directly coupled products, aryl acetylens (ArPh). Formation of the side product was completely suppressed by conducting the reaction under high CO pressure (20 atm) conditions. The present method provides a variety of carbonylated products in good yield even with electron-deficient aryl iodides which usually give inferior results due to their tendency to undergo decarbonylation in the cross-coupling reaction of ethynylstibanes and acyl halides.