Synthesis of 2,5-disubstitued benzimidazole using SnCl2-catalyzed reduction system at room temperature简

Stannous chloride dihydrate is used as an efficient catalyst in reductive cyclization of 2-nitro-5- substituted aniline Schiff base leading to stable 2,5-disubstitued benzimidazole derivatives in excellent yields with good purity. It provides a novel method of synthesis of 2,5-disubstitued benzimidazole under reductive system at room temperature.     

Impregnated copper on magnetite as catalyst for the O-arylation of phenols with aryl halides简

Nanoparticle Fe304 encapsulated CuO, as a heterogeneous catalyst, is a facile system for the synthesis of diaryl ethers by the cross-coupling reaction of various substituted aryl halides with various substituted phenols, which avoids using any type of expensive ligand and can be recovered from the reaction mixture by using a simple magnet. Moreover, this catalyst can be reused three times with high catalytic activity.     

Effect of Molecular Structure on the GasPermeability of Cellulose Aliphatate Esters简

In this work, four kinds of cellulose aliphatate esters, cellulose acetate （CA）, cellulose propionate （CP）, cellulose butyrate （CB） and cellulose acetate butyrate （CAB） are synthesized by the homogeneous acylation reactions in cellulose/AmimC1 solutions. These cellulose aliphatate esters are used to prepare gas separation membranes and the effects of molecular structure, such as substituent type, degree of substitution （DS） and distribution of substituents, on the gas permeability are studied. For CAs, as the DS increases, their gas permeabilities for all five gases （02, N2, CH4, CO and CO2） increase, and the ideal permselectivity significantly increases first and then slightly decreases. At similar DS value, the homogenously synthesized CA （distribution order of acetate substituent： C6 〉 C3 〉 C2） is superior to the heterogeneously synthesized CA （distribution order of acetate substituent： C3 〉 C2 〉 C6） in gas separation. With the increase of chain length of aliphatate substituents from acetate to propionate, and to butyrate, the gas permeability of cellulose aliphatate esters gradually increases. The cellulose mixed ester CAB with short acetate groups and relatively long butyrate groups exhibits higher gas permeability or better permselectivity than individual CA or CB via the alteration of the DS of two substituents.     

Synthesis of cyclopentenyl and cyclohexenyl ketones via [3 + 2] and [4 + 2] annulations of 1,2-allenic ketones简

In this paper, an efficient synthesis of cyclopentenyl ketones and cyclohexenyl ketones through tertiary phosphine catalyzed [3 ＋ 2] and [4 ＋ 2] annulations of 1,2-allenic ketones with activated alkenes has been developed. Compared with published synthetic methods on cyclopentenyl ketones and cyclohexenyl ketones, the protocols developed in this paper have the advantages such as readily available starting materials, mild reaction conditions and high efficiency.     

Preparation and Characterization of Polyborosiloxanesand Their Blends with Phenolic Resin as ShapeableCeramic Precursors简

Two polyborosiloxanes(PBSis) with char yield up to 74.13% at 800 °C were synthesized by the direct polycondensation of boric acid with phenyltrimethoxysilane in diglyme. The PBSis were characterized by gel permeation chromatography, IR spectroscopy as well as1H-,29Si- and11B-NMR. PBSi modified phenol-formaldehyde resins(PBSi/PFs) were prepared at different PBSi/PF mass ratios and were cured at 150 °C. The PBSi/PFs were characterized by IR spectroscopy, scanning electron microscopy, thermogravimetric analysis and tensile test. The results revealed that the cured PBSi/PFs had sea-island morphology and higher char yield than the common PF. PBSi/PF blend with PBSi/PF mass ratio of 0.4:1 had char yield up to 70.83% at 800 °C. The PBSi/PFs had tensile strength similar to PF. The ceramization of PBSi/PFs was also studied. The silicon boron oxycarbide(SiBOC) ceramics formed were characterized by IR spectroscopy and elemental analysis. This method provided a valuable way to prepare easily shapeable polymer blends as ceramic precursors.     

Synthesis and acaricidal activity of strobilurin-pyrimidine derivatives简

Pyriminostrobin, a new acaricide, was discovered in our previous studies. Because introducing fluorine into organic compounds can increase bioactivity, pyriminostrobin was modified as a series of strobilurin-pyrimidine derivatives for biological screening. The compounds were characterized by 1H NMR, MS and elemental analysis. Preliminary bioassays demonstrated that compounds 7e and 7i exhibited significant control against Tetranychus cinnabarinus （Boisd.） at 0.625 mg L^-1, and their acaricidal potencies were higher than pyriminostrobin in a greenhouse. The relationship between structure and acaricidal activity was also studied.     

Synthesis and Optical Properties of HyperbranchedPAEKs Containing Porphyrin and Its Metal Derivatives简

Novel functional hyperbranched poly(aryl ether ketone)s(HPAEKs) bonded with nonlinear optical chromophores(meso-tetrakis(4-hydroxyphenyl) porphyrin, THPP and its metal derivatives) were synthesized and characterized by 1H-NMR and UV-Vis absorption spectra. The incorporation of chromophores into HPAEKs endowed HPAEKs novel NLO and OL properties. Indeed, dendritic architecture allowed for maximum dispersion of the chromophores, avoided aggregation, more optical limiting property was obtained. Simultaneously, they retained the excellent properties of the materials, particularly in thermal stability. Their optical properties were evaluated by nonlinear optical analyses and optical limiting. The results showed that these polymers possessed good optical limiting(OL) property and large nonlinear optical(NLO) susceptibilities(ca. 10 12esu). All polymers containing chromophores presented excellent thermal stability(DT5 524.17 °C).     

Morphology and Phase Composition ofGelatin-Starch Blends简

Morphology and phase compositions of different starch-gelatin blends were investigated by various microscopes: optical, SEM and synchrotron FTIR microscopy. A high amylose(80%) corn starch, grafted with hydroxypropyl to enhance flexibilty and hydrophilicity, and plasticized by poly(ethylene glycol)(PEG), was used in this work. SEM revealed that the surface became smoother after adding PEG. Optical microscopy observation revealed that compatibility between gelatin and starch was improved by adding PEG. An FTIR beam focused on a 5 μm× 5 μm detection area by the micro-spectroscope was used to map chemical composition. The ratio of areas of the saccharide bands(1180–953 cm 1) and the amide I and II bands(1750–1483 cm 1) was used to monitor the relative distributions of the two components in the blends. The FTIR maps indicated that gelatin constituted the continuous phase up to 80% of starch content. All of the FTIR spectra showed contributions from both starch and gelatin absorptions, therefore indicating that complete demixing with pure starch and gelatin domains did not occur. The PEG improved the compatibility of the gelatin-starch blends.     

High Photocatalytic Properties of Zinc OxideNanoparticles with Amidoximated BacterialCellulose Nanofibers as Templates简

The freshly prepared water-wet amidoximated bacterial cellulose （Am-BC） serves as an effective nanoreactor to synthesis zinc oxide nanoparticles by in situ polyol method. The obtained ZnO/Am-BC nanocomposites have been characterized by field emission scanning electron microscopy （FE-SEM）, X-ray diffraction （XRD）, Fourier transformed infrared spectroscopy （FTIR） and thermogravimetric analysis （TGA）. The influence of the zinc acetate concentration on the morphologies and size ofZnO nanoparticles and the possible formation mechanism were discussed. The results indicated that uniform ZnO nanoparticles were homogeneously anchored on the Am-BC nanofibers through strong interaction between the hydroxyl and amino groups of Am-BC and ZnO nanoparticles. The loading content of ZnO nanoparticles is higher using Am-BC as a template than using the unmodified bacterial cellulose. The resultant nanocomposite synthesized at 0.05 wt% shows a high photocatalytic activity （92%） in the degradation of methyl orange.     

Thermal rearrangement of bis(hydroxymethyl)phosphines as a way to P-chiral phosphine oxides

Bis(hydroxymethyl)(2-pyridyl)- and bis(hydroxymethyl)-[(2-pyridyl)ethyl]phosphines on heating to 180 °C undergorearrangement leading to racemic P-chiral tertiary P-methyl-P-(hydroxymethyl)-containing phosphine oxides. The spontaneous self-resolution of these enantiomer mixtures during the crystallization was demonstrated.     

Synthesis of organic phosphines and phosphine oxides from elemental phosphorus and phosphine in the presence of strong bases

Data on the reactions of elemental phosphorus and phosphine with electrophilic reagents are described systematically and analyzed. These reactions occur in the presence of strong bases and yield primary, secondary, and tertiary phosphines and phosphine oxides. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1695–1702, September, 1998.     

Hantzsch ester triggered metal-free cascade approach to isoindolinones

Disclosed herein is an expedient synthesis of biologically important isoindolinone derivatives from reactions of 2-formylbenzoic acids with various amines. This method operates via a deliberately designed catalyst-free tandem reductive amination/cyclization cascade event triggered by a transfer hydrogenation process with easily available Hantzsch ester as the organic hydride source. The ease of operation, mild reaction conditions, facile accessibility of the starting materials, and easy scalability of the current method distinguish it from the other precedent protocols, thus enable it a practical approach to the syntheses of valuable isoindolinone-incorporated drugs.     

Benson group additivity values of phosphines and phosphine oxides: Fast and accurate computational thermochemistry of organophosphorus species

Composite quantum chemical methods W1X-1 and CBS-QB3 are used to calculate the gas phase standard enthalpy of formation, entropy, and heat capacity of 38 phosphines and phosphine oxides for which reliable experimental thermochemical information is limited or simply nonexistent. For alkyl phosphines and phosphine oxides, the W1X-1, and CBS-QB3 results are mutually consistent and in excellent agreement with available G3X values and empirical data. In the case of aryl-substituted species, different computational methods show more variation, with G3X enthalpies being furthest from experimental values. The calculated thermochemical data are subsequently used to determine Benson group additivity contributions for 24 Benson groups and group pairs involving phosphorus, thereby allowing fast and accurate estimations of thermochemical data of many organophosphorus compounds of any complexity. Such data are indispensable, for example, in chemical process design or estimating potential hazards of new chemical compounds. © 2018 Wiley Periodicals, Inc.     

High efficient iron-catalyzed transfer hydrogenation of quinolines with Hantzsch ester as hydrogen source under mild conditions

A highly efficient transfer hydrogenation of quinolines with Hantzsch ester as hydrogen source in the presence of 1 mol% Fe(OTf)₂ under mild conditions has been developed. A series of substituted 1,2,3,4-tetrahydroquinoline derivatives were afforded in excellent yields with good functional group tolerance.     

Hydrogenation of olefins using Hantzsch ester catalyzed by palladium on carbon

Hantzsch 1,4-dihydropyridine (HEH), a well-known model compound of coenzyme NAD(P)H was found as an efficient reducing agent in hydrogenation of unactivated olefins catalyzed by Pd/C. α,β-Unsaturated ketones also underwent hydrogenation, affording the corresponding saturated ketones selectively.