二醛纤维素交联壳聚糖膜的制备及其染料吸附性能

首先通过浓硫酸水解微晶纤维素(MCC)制备纳米纤维素(NCC)悬浮液,然后通过高碘酸钠选择性氧化NCC悬浮液制备二醛纤维素(DAC)水溶液,最后将DAC水溶液与壳聚糖(CTS)醋酸溶液混合,通过溶液浇注、溶剂蒸发法制得DAC交联CTS膜(DAC-CTS交联膜)。采用红外光谱(FT-IR)、交联度测试、耐酸稳定性测试表征了DAC-CTS交联膜的结构及性能,并研究了其作为吸附剂对阴离子染料活性艳蓝KN-R的吸附能力。结果表明:与纯CTS膜相比,DAC-CTS交联膜的耐酸稳定性与拉伸强度均明显提高;当m(DAC)∶m(CTS)=3%时,该交联膜达到最大饱和吸附量1 118.8mg/g;此外,DAC-CTS交联膜对活性艳蓝KN-R的吸附符合Langmuir吸附等温模型和准2级动力学模型。     

聚乙烯醇/半纤维素/纤维素纳米晶复合膜的制备和性能

通过碱解醇沉法从玉米芯中提取半纤维素,进而采用溶液共混流延法制备出不同比例的聚乙烯醇(PVA)/半纤维素共混膜,在此基础上加入通过硫酸水解脱脂棉制备的纤维素纳米晶(NCC),制备了NCC增强的复合膜.DSC、TGA、FTIR、SEM和薄膜拉伸等研究表明,复合膜的各组分间形成了氢键作用,相容性良好.在PVA/半纤维素共混膜中,半纤维素的加入大幅度提高了复合膜的断裂伸长率:当PVA与半纤维素质量比为3∶1时,复合膜的断裂伸长率高达380%,比纯PVA的140%增加了1.7倍,而拉伸强度仍能保持在较高的水平;纤维素纳米晶的加入,还可改善复合膜的韧性;半纤维素对PVA组分的结晶性能产生了影响,而刚性结构的NCC则对PVA的结晶起抑制作用.此外半纤维素和NCC的引入也提高了复合膜的热性能,使第二阶段分解速率峰的温度提高了约50℃.     

聚乙烯醇/纳米纤维素复合膜的渗透汽化性能及结构表征

将聚乙烯醇/纳米纤维素(PVA/NCC)复合膜应用于乙醇-水混合溶液的渗透汽化脱水过程,探讨了纳米纤维素对膜的溶胀性能、机械性能和渗透汽化性能的影响; 利用原子力显微镜(AFM)探测了纳米纤维素的形貌特征; 采用傅里叶变换红外光谱仪(FTIR)、扫描电镜(SEM)、差示扫描量热仪(DSC)和热重分析仪(TGA)对膜结构...     

壳聚糖/明胶/TiO2三元复合膜的制备与功能特性

纳米TiO2用阴离子表面改性剂SDS改性后,以溶液共混法制备了壳聚糖／明胶/TiO2复合膜,用FTIR、XRD、SEM、TEM表征了其结构与形态,并测试了其吸水率、透光率、力学性能和抑菌性能。进而探讨了复合膜中明胶和纳米TiO2含量对壳聚糖膜性能的影响。结果表明：复合膜中,壳聚糖、明胶和TiO2微粒间存在强烈的氢键相互作用,从而使明胶与壳聚糖具有良好的相容性,TiO2与壳聚糖、明胶分子间有很好的界面作用。适量TiO2的加入,可使壳聚糖／明胶共混膜的力学性能得到改善,明胶质量分数为0．30时,掺杂wTiO2为0．01、0．02的复合膜较壳聚糖／明胶共混膜的湿强及干态韧性分别提高了55．9％,40．8％和49．7％,47．9％。此外,复合膜的抑菌性能随明胶的增加而降低,但随TiO2的掺杂比的增加而增强,纳米TiO2的引入拓宽了壳聚糖和明胶两种天然高分子材料的应用范围。     

纳米纤维素/聚乳酸全绿色纳米复合材料的制备及性能

制备得到纳米纤维素(NC),其为横向尺寸20~40 nm、长度400~2000 nm的纳米丝.对NC进行醋酸酯化疏水改性得到醋酸酯化纳米纤维素(ANC).分别将NC和ANC与聚乳酸(PLA)复合制备纳米复合材料,研究了NC添加量、疏水改性及与PLA的复合方式对PLA力学性能和结晶性能的影响规律.结果表明,采用溶液浇铸法制备纳米复合膜时,ANC在PLA基体中的分散性优于NC,但是对于复合膜拉伸性能的改善不明显.DSC等温结晶结果表明,ANC可以提高PLA的结晶度和结晶速率;采用熔融复合法制备的NC/PLA纳米复合材料,不仅保持了PLA的高强度、高模量和较高的热稳定性,而且显著改善了其韧性,当NC添加量为3.5%(质量分数)时,断裂伸长率比纯PLA提高了12.1倍.     

水下超疏油性壳聚糖-SiO_2复合膜的制备与性能

利用壳聚糖和亲水性SiO2纳米颗粒,通过浸渍提拉法在玻璃表面制备了水下超疏油壳聚糖-SiO2复合膜.采用扫描电镜、原子力显微镜和接触角仪,研究了组分配比、浸泡时间对复合膜表面形貌、粗糙度、水下油滴接触角(OCA)和滚动角(SA)的影响.结果表明,随着亲水性SiO2含量的增加,复合膜表面聚集的亲水性SiO2纳米颗粒增多,水下疏油性提高;随着浸泡时间延长,复合膜的水下油滴OCA逐渐增大,浸泡168 h时略有减小,SA也受到浸泡时间的影响.当SiO2乙醇悬浮液和壳聚糖溶液的体积比为1∶10和1∶5时,复合膜呈现疏油性;当SiO2乙醇悬浮液和壳聚糖溶液的体积比大于等于1∶2时,复合膜的水下油滴接触角OCA大于150°.当SiO2乙醇悬浮液和壳聚糖溶液的体积比为1∶1、浸泡24 h时,复合膜水下疏油性最好,水下油滴接触角OCA达157.8°,滚动角SA为1.9°.复合膜可用于水下油滴的操控,实现了溴(Br2)和苯乙烯在油滴微反应器中的加成反应.     

CNC/角蛋白复合膜的制备及其染料吸附性能

采用硫酸水解纤维素的方法制备纤维素纳米微晶(CNC),并将其与角蛋白溶液共混浇筑制备染料吸附膜。通过拉伸以及耐水性能测试等表征了其物理性能,并评价了其作为吸附剂对染料活性艳蓝KN-R的吸附能力。对比了CNC/角蛋白复合膜与纯角蛋白膜对活性艳蓝KN-R的吸附性能。研究表明,与纯角蛋白膜相比,CNC/角蛋白复合膜的耐水性能、力学性能及对染料的去除效率和吸附容量均大于纯角蛋白膜的相应值。此外,CNC/角蛋白复合膜对活性艳蓝KN-R的吸附符合Langmuir吸附等温模型和准二级动力学模型。     

纳米纤维素晶须的表面醋酸酯化改性及复合材料的力学性能

采用硫酸水解法制备纳米纤维素晶须, 再以冰醋酸为分散介质, 浓硫酸为催化剂, 醋酸酐为酯化剂对纳米纤维素晶须进行不同程度醋酸酯化改性, 得到醋酸酯化的纳米纤维素. 采用红外光谱(FTIR)、 X射线光衍射(XRD)、 透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对改性产物进行分析和表征. 结果表明, 改性纳米纤维素晶须中醋酸酯基的平均取代度过小或过大时均不适宜用作复合材料的增强相. 当改性纳米纤维素晶须中醋酸酯基的平均取代度为0.05时, 醋酸酯化反应只发生在纳米纤维素晶须的表面. 此时, 晶须能在丙酮中稳定悬浮, 表现出流动双折射现象, 并保持了改性前纳米纤维素晶须的棒状形态和高结晶度. 将这种改性后的纳米纤维素晶须作为增强相与醋酸纤维素通过溶液浇铸法制成纳米复合膜, 结果显示, 与空白醋酸纤维素膜相比, 添加改性纳米纤维素晶须后, 纳米复合膜的拉伸强度、 杨氏模量和断裂伸长率都得到了提高. 在玻璃化转变区间纳米复合膜储能模量的降低幅度小于空白膜.     

聚醚砜/纤维素晶体共混膜材料及其超滤性能

聚醚砜与纤维素晶体等共混成铸膜液,采用浸没沉淀相转化法制备聚醚砜/纤维素晶体共混膜材料.通过超滤装置检测复合膜的水通量、截留率、平均孔径、孔隙率、抗污染性等超滤性能,从而讨论了纤维素晶体含量对共混膜超滤性能的影响.采用抗张测试机、热重分析仪(TGA)、原子力显微镜(AFM)对共混膜的力学性能、热稳定性能、形貌结构进行表征.结果表明,随着纤维素晶体的含量的增加,共混膜的纯水通量先升高后有所降低,截留率均保持在91%～95%,抗张强度、断裂伸长率先增大后有所下降,抗污染性较纯聚醚砜膜显著提高.当纤维素晶体质量分数为1%时,纯水通量达到最大为813.3L·m-2·h-1,孔隙率为88.8%,平均孔径达为70.9nm,抗张强度为7.25MPa,断裂伸长率为11.6%,平均污染度FR值为22.0%,衰减系数m值为35.8%.共混膜具有由纤维素晶体、聚醚砜热降解分别引起的两个失重阶段.共混膜为典型非对称膜结构,表皮层较为致密,多孔支撑层孔径较大.     

纤维素/全硫化弹性纳米粒子复合膜的制备与性能

利用碱脲溶剂低温溶解纤维素,在该体系中掺杂一定比例的全硫化羧基丁苯弹性纳米粒子,制备了纤维素/全硫化弹性纳米粒子复合膜.通过透射电镜、扫描电镜、WAXD、固体核磁共振、热分析和力学性能测试等对该复合膜的结构和性能进行了表征.结果表明,全硫化羧基丁苯弹性纳米粒子(CSB ENP)均匀的分散在具有微纳孔洞结构的纤维素基体中.CSB ENP的引入对纤维素再生过程中的结晶性影响不大.纤维素/全硫化弹性纳米粒子复合膜具有良好的透光性,并且热稳定性也有所提高.加入少量的CSB ENP可以增韧纤维素膜,且能保持良好的力学性能.当CSB ENP的含量为5 wt%时复合膜的断裂拉伸强度和断裂伸长率同时得到了提高.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.