微波发泡制备三聚氰胺甲醛泡沫塑料及其性能

用三聚氰胺、甲醛和DJ-1型增韧剂在碱性条件下制备了改性三聚氰胺甲醛树脂,将其与表面活性剂、发泡剂、固化剂充分混合搅拌,采用微波发泡炉在一定的功率下进行发泡制备三聚氰胺泡沫塑料.研究了增韧剂的用量、微波功率和发泡时间对泡沫结构和性能的影响.并用光学显微镜、TGA、驻波管对三聚氰胺泡沫塑料的泡孔结构、热学性能和声学性能进行了测试和分析.研究表明:当发泡液质量为50 g时,最佳发泡功率为2 kW,最佳发泡时间为60 s;DJ-1型增韧剂的加入使泡沫的韧性提高,当其质量分数为10％时,泡沫的拉伸强度达到0.112 MPa;泡沫的分解温度约400℃,此时的质量残留率接近60％;泡沫在中高频(≥1 000 Hz)区域的吸声系数高达0.9以上.     

高温煤焦油增韧酚醛泡沫的制备及性能表征

以高温煤焦油为原料,部分替代石油基苯酚合成可发泡性酚醛树脂,通过发泡工艺制备煤焦油酚醛泡沫。利用气相色谱质谱仪和红外光谱仪分别对高温煤焦油和酚醛泡沫进行分析表征;采用光学显微镜、热重分析仪、极限氧指数仪、导热系数仪等对酚醛泡沫的表观形貌、压缩强度、粉化率、热稳定性、阻燃性能和隔热性能进行表征。结果表明,煤焦油酚醛泡沫的压缩强度有所降低,但是泡沫的韧性提高,其粉化率下降。同时煤焦油酚醛泡沫具有良好的热稳定性,当替代率为10%-15%时,极限氧指数最高为36.1%,导热系数最低为0.034 W/（m·K）。这说明,高温煤焦油能够部分替代苯酚制备出性能优良的酚醛泡沫,为高温煤焦油的高值化利用提供了新的思路。     

间乙炔基苯偶氮线性酚醛泡沫的结构与性能研究

采用高温化学发泡法制备了一种间乙炔基苯偶氮酚醛树脂泡沫(EPANF).采用傅里叶红外光谱(FTIR)、凝胶渗透色谱(GPC)、光学显微镜、扫描电子显微镜(SEM)、导热系数分析仪、临界氧指数分析仪和热重分析(TG)等表征了间乙炔基苯偶氮酚醛树脂(EPAN)结构和EPANF的泡孔结构、压缩强度、隔热性能、阻燃性能和热性能.研究结果表明,当所用发泡剂含量为18%,泡沫体的表观密度为0.179 g/cm~3时,EPANF泡孔均匀微细,闭孔率高,泡孔平均粒径为350μm左右.随着表观密度增加,泡沫体压缩强度增大,热导率系数增大,隔热性能略有下降,但其临界氧指数变大,阻燃性能提高.当表观密度为0.363 g/cm~3时,EPANF的压缩强度达到最大为5.63 MPa.EPANF的5%和10%热失重温度分别为333、381℃,其700℃的残炭率和1000℃的残炭率分别为65.8%和58.2%,耐热性和耐烧蚀性较普通线性酚醛树脂有明显提高.EPANF作为热结构材料和烧蚀材料有望在航天航空等领域应用.     

水发泡淀粉挤出泡沫的结构与性能

以水为发泡剂,普通玉米淀粉为原料,采用双螺杆挤出机制备淀粉泡沫材料,研究了发泡剂用量及聚乙烯醇的加入量对泡沫材料结构与性能的影响。 用扫描电子显微镜观察了泡沫材料截面的形态,用万能材料试验机测试了泡沫材料的力学性能。 结果表明,水的质量分数为8%时淀粉泡沫径向膨胀率和发泡倍率最高,分别为22倍和17.6倍,压缩模量最高（4.07 MPa）。 加入质量分数10%的聚乙烯醇(PVA)使淀粉泡沫的孔径变大至1.29 mm,壁厚增加至82.43 μm,同时压缩模量增加至9.70 MPa。     

橡塑型泡沫吸声材料的研究

采用化学发泡方法制得了以乙丙橡胶、聚氯乙类和岩棉为主要原料的泡沫吸声材料,其平均吸声系数达０．５以上,且此材料的低频吸声性能比一般多孔型吸声材料的要好得多。通过正交实验得出了最佳配方,还对乙丙橡胶用量、增塑剂用量、发泡剂用量和岩棉用量对材料吸声性能的影响做了研究。     

复合成核剂对聚丙烯结晶行为的影响

以超细橡胶粒子与有机磷酸盐成核剂复配的方法制备了一种新型复合成核剂,通过示差扫描量热法(DSC)比较了复合成核剂改性PP以及有机磷酸盐成核剂改性PP的结晶温度、等温结晶行为及等温结晶动力学;利用扫描电子显微镜(SEM)的能谱附件和透射电子显微镜(TEM)研究了复合成核剂的微观形态及其在PP中的分散情况.研究结果表明,复合成核剂中超细橡胶粒子作为载体使有机磷酸盐成核剂附着在其表面,提高了成核剂在聚丙烯中的分散性,因而提高了成核剂的成核效率,当成核剂用量较小时,即可明显提高PP的结晶速率和力学性能.     

膨胀蛭石包覆聚苯乙烯发泡颗粒/水泥复合泡沫材料的制备及性能

利用环氧树脂将膨胀蛭石黏附在聚苯乙烯发泡(EPS)颗粒表面上,制备表面无机化包覆的EPS颗粒(CEPS),将其与水泥胶凝材料混合,制备CEPS/水泥复合泡沫材料.探讨膨胀蛭石的包覆量及CEPS颗粒用量等对复合泡沫材料的力学性能和保温性能的影响,并采用锥形量热法和喷枪火焰燃烧法研究了复合泡沫材料的防火性能.研究结果表明,复合泡沫的抗折强度、抗压强度、干密度和导热系数均随包覆量的增大而增加;当CEPS颗粒用量为1000 m L时,复合泡沫材料的干密度和导热系数较低,分别为269.3 kg/m~3和0.0544 W/(m·K),抗折强度和抗压强度相对较高.锥形量热实验结果表明,随着包覆量的增加,复合泡沫的最大热释放速率、总放热量和烟释放量都逐渐降低,着火时间逐渐延长.喷枪火焰燃烧法实验结果表明,除了复合泡沫断面上与火焰接触的表面裸露的EPS颗粒燃尽外,燃烧后断面结构都能够保持比较完整.     

以废玻璃制备泡沫玻璃及其性能研究

发泡玻璃是一种新兴的隔热、隔音材料,为了实现废玻璃资源化利用,以废玻璃为原料,以CaCO_3为发泡剂、以Na_3PO_4作为稳泡剂、以H_3BO_3作为助溶剂,经过高温熔化、发泡、退火等过程,制备出泡沫玻璃,并研究了发泡剂含量和发泡温度对泡沫玻璃表观性能、隔热性能和力学性能的影响。     

聚酰亚胺泡沫材料的制备与性能表征

采用3,3′,4,4′-二苯甲酮四甲酸二酐(酮酐,BTDA)和4,4′-二氨基二苯甲烷(MDA)为主要原料制备了一种聚酰亚胺泡沫材料.采用傅里叶变换红外光谱(FTIR)、核磁共振氢谱(1H-NMR)、扫描电镜(SEM)、导热系数测定仪、热失重分析(TGA)、差式扫描量热分析(DSC)及驻波管分别对前聚体粉末化学结构、泡沫泡孔结构、热性能及声学性能进行了表征.研究结果表明前聚体粉末以聚酰胺酯和铵盐两种形式存在,所得泡沫泡孔均匀,并且随前聚体干燥温度升高,泡孔尺寸变小.泡沫的导热系数λ为7.62×10-3W/(m.K),失重5wt%的分解温度Td5为540℃,玻璃化转变温度Tg为306℃,表明其具有优良的隔热耐热性.并且由声学测试可知在0～2000Hz频率范围内,吸声系数可达0.79,传声损失可达19.4dB,具有低频吸声、隔声性.     

空心玻璃微珠对聚氨酯泡沫燃烧和力学性能的影响

通过向聚氨酯发泡体系中添加空心玻璃微珠,制备出空心玻璃微珠聚氨酯三相泡沫.研究了空心玻璃微珠添加量、聚磷酸铵(APP)用量、膨胀阻燃体系(IFR)浓度等因素对聚氨酯泡沫燃烧和力学性能的影响.结果表明,单独添加空心玻璃微珠对聚氨酯泡沫的氧指数和水平燃烧速度影响不大.添加APP或IFR后,空心玻璃微珠聚氨酯三相泡沫的阻燃效...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.