Accumulation of phenyl boronic acid-carrying telomers on a gold surface

By coupling two equivalents of N,N-diethyldithiocarbamoylmethylbenzoic acid succinimidyl ester with cystamine dihydrochloride, a disulfide-carrying compound (Cys-BDC) was prepared and used as iniferter (a compound which pursues initiation, chain transfer, and termination) in the telomerization of N,N-dimethylacrylamide and 3-acrylamidophenylboronic acid. The telomerization was carried out in the presence of N,N,N',N'-tetraethylthiuram disulfide under photoirradiation at 365 nm. An aqueous solution of the telomer obtained showed responsiveness to both temperature and sugars as confirmed by the turbidity measurements. The telomer formed a self-assembled monolayer (SAM) on a gold surface as confirmed by both cyclic voltammetry (CV) and ellipsometry. The recognition of sugar residues by the telomer SAM constructed on the gold electrode was detected by the CV measurements. The usefulness of the iniferter to prepare various telomer-carrying SAMs with bio-related functions was strongly suggested.     

Investigation of the Antifouling Properties of Phenyl Phosphorylcholine‐Based Modified Gold Surfaces

Low impedance, antifouling coatings on gold electrodes based on three new zwitterionic phenyl phosphorylcholine (PPC)‐based layers namely 1) reductively adsorbed PPC diazonium salt, 2) dithiocarbamate PPC SAM and 3) lipoamide PPC SAM (PPC coupled to α‐lipoic acid) were evaluated. The layers were assessed for their ability to limit nonspecific adsorption of proteins to electrode surface with some significant differences observed compared with previously studied PPC diazonium salts reductively adsorbed on glassy carbon. Fluorescence microscopy and electrochemical impedance spectroscopy results suggest that protein adsorption is sensitive to the difference in the structure of the PPC molecules and the charge neutrality of the layers. The lipoamide PPC SAM was shown to be the most effective at resisting nonspecific protein adsorption and this layer was as effective as the ‘gold standard’ of oligo(ethylene oxide) SAMs on gold and PPC diazonium salts reductively adsorbed on glassy carbon.     

Resistance of surface-confined telomers with pendent glucosylurea groups against non-specific adsorption of proteins

A disulfide-carrying random telomer with pendent d-glucosylurea groups (Cys-poly(glucosylureaethyl methacrylate-r-ureaethyl methacrylate), Cys-Poly(GUMA-r-UMA)) was obtained by UV-irradiation of GUMA and UMA in the presence of benzyl N,N-diethyldithiocarbamoyl (BDC) derivative which shows the abilities of initiation, transfer, and termination (iniferter). The disulfide-carrying telomer was accumulated on a gold electrode and colloidal gold-immobilized glass substrate, and the binding of various proteins to the surface of the polymer brush was examined by both cyclic voltammetry (CV) with hydroquinone as a probe, and localized surface plasmon resonance (LSPR) absorption method. The Cys-Poly(GUMA-r-UMA) brush did not show a significant non-specific adsorption of proteins such as bovine serum albumin and egg white lysozyme. Furthermore, sugar binding proteins, concanavalin A (with an affinity for mannose and glucose) and wheat germ agglutinin (with an affinity for N-acetylglucosamine), were only slightly adsorbed to the GUMA-carrying brush, which is in contrast with the prompt and distinct binding of these proteins to the brushes composed of 2-methacryloyloxyethyl d-glucopyranoside and 1-(6′-methacrylamido)hexyl-2-N-acetoamido-2-deoxy-d-glucopyranoside, respectively. The glucosylurea group-carrying telomer brush prepared here might be useful to provide a “bio-inert” surface in bio-medical fields.     

Surface stress, kinetics, and structure of alkanethiol self-assembled monolayers

The surface stress induced during the formation of alkanethiol self-assembled monolayers (SAMs) on gold from the vapor phase was measured using a micromechanical cantilever-based chemical sensor. Simultaneous in situ thickness measurements were carried out using ellipsometry. Ex situ scanning tunneling microscopy was performed in air to ascertain the final monolayer structure. The evolution of the surface stress induced during coverage-dependent structural phase transitions reveals features not apparent in average ellipsometric thickness measurements. These results show that both the kinetics of SAM formation and the resulting SAM structure are strongly influenced both by the surface structure of the underlying gold substrate and by the impingement rate of the alkanethiol onto the gold surface. In particular, the adsorption onto gold surfaces having large, flat grains produces high-quality self-assembled monolayers. An induced compressive surface stress of 15.9 +/- 0.6 N/m results when a c(4x2) dodecanethiol SAM forms on gold. However, the SAMs formed on small-grained gold are incomplete and an induced surface stress of only 0.51 +/- 0.02 N/m results. The progression to a fully formed SAM whose alkyl chains adopt a vertical (standing-up) orientation is clearly inhibited in the case of a small-grained gold substrate and is promoted in the case of a large-grained gold substrate.     

Orientational effect of surface-confined cyclodextrin on the inclusion of bisphenols

The molecular recognition of various kinds of bisphenols (BPs) and a bisphenol A-polymer conjugate (BPA-polymer) by a self-assembled monolayer (SAM) of thiolated beta-cyclodextrin (CD) on a gold electrode was examined using cyclic voltammetry (CV). Based on the inhibitory effect of BPs on the inclusion of hydroquinone (HQ) as a probe by the surface-confined CD, the association constants (K(assoc)) of BPs with the immobilized beta-CD were estimated. The K(assoc) values for BPs with the SAM of 3-dithiobis(undecanoylamido)-3-deoxy-beta-cyclodextrin (DTUA-beta-CD) were smaller than those in the free beta-CD system reported previously. A similar tendency was obtained when 6-(lipoylamido)-6-deoxy-beta-cyclodextrin (LP-beta-CD) was used in place of DTUA-beta-CD. The K(assoc) values for all the BPs except for bisphenol B with the SAM of LP-beta-CD were always larger than those with the SAM of DTUA-beta-CD, due to a difference in the orientation of the beta-CD moiety in the SAMs. Furthermore, adsorption and desorption processes of the BPA-polymer from the surface-confined beta-CD was followed using local surface plasmon resonance spectroscopy.     

Analysis of immunoreaction with localized surface plasmon resonance biosensor

The localized surface plasmon resonance (LSPR)-based optical biosensor was used as a potential tool for label-free detection of immunoreaction. The glass substrate covered with the self-assembled monolayer (SAM) of gold colloids was used widely in the sensors. Here, the glass substrate was modified by chemical hydroxylation first, and then gold colloids were immobilized on the substrate by electrostatic adsorption. The LSPR spectra were obtained on UV–vis absorption spectrometer. The specificity was examined by extensive nonspecific binding tests. The resonance condition on the local dielectric environment enables a simple form of molecular sensing. The binding of analyte to the biosensor surface causes a change in the absorbance which was responsive to the concentration of human IgG. So, the LSPR sensing yields similar results to the SPR technique, yet with much simpler instrument.     

Electron transport through a self-assembled monolayer of thiol-end-functionalized tetraphenylporphines and metal tetraphenylporphines

The monolayers of several thiol-end-functionalized tetraphenylphophines (SH-TPP) and metal tetraphenylporphines (SH-MTPP) were self-assembled on gold surfaces and identified by cyclic voltammetry (CV), electrochemical impedance spectroscopy, scanning electrochemical microscopy, and the contact angle. The CV peaks of the [Fe(CN)6]3-/ [Fe(CN)6]4- couple were used to identify the efficiency of electrons transferring through the self-assembled monolayer (SAM). The results suggested that SH-TPP and SH-MTPP could form high-quality SAMs on gold surfaces. The SAMs blocked electron transport from the gold electrode to solution. When the length of the thiol-end-link spacer (alkyl group) increased, the electron transport ability of the SAM decreased because of the increased insulator properties of the alkyl chain. With the insertion of metallic ions, the electron transport ability of the SAM of SH-MTPP increased compared to that of the SAM of SH-TPP, which was probably due to the fact that (i) the insertion of metallic ions changed the molecular structure and the molecular structure of SH-MTPP played an important role in electron transport through the SAM and (ii) the insertion of metallic ions increased the electron tunneling probability through the monolayer.     

Voltammetric Study of Methylene Blue at Thiol SAMs‐Modified Gold Electrodes

The voltammetric behavior of methylene blue (MB) at thiol self‐assembled monolayers modified gold electrodes (SAMs/Au) has been investigated. MB exhibited a redox peak at about ?0.35 V (vs.SCE) in alkaline solution at bare gold electrodes. When the gold electrodes were modified with thiol SAMs, the peak grew due to the accumulation of MB at SAMs. With the solution pH rising, more MB was accumulated, hence the peak height increased, which differed from that at bare gold electrodes. The electrode process at SAMs/Au featured the characteristics of adsorption and/or electrode reaction controlled. The enhancing action of glutathione monolayer (GSH SAM), 3‐mercaptopropionic acid monolayer (3MPA SAM) and other thiol SAMs was compared. Among these, GSH SAM made the MB peak increase more. At GSH SAM/Au, the peak height varied linearly with MB concentration over the range of 2 μM to 400 μM. So this can be developed for the determination of MB and studies concerned. The accumulation behavior caused by GSH SAM and native fish sperm dsDNA was compared. The interaction between DNA and MB was also discussed under this condition.     

Immobilization of the nanoparticle monolayer onto self-assembled monolayers by combined sterically enhanced hydrophobic and electrophoretic forces

The immobilization of surface-derivatized gold nanoparticles onto methyl-terminated self-assembled monolayers (SAMs) on gold surface was achieved by the cooperation of hydrophobic and electrophoretic forces. Electrochemical and scanning probe microscopy techniques were utilized to explore the influence of the SAM's structure and properties of the nanoparticle/SAM/gold system. SAMs prepared from 1-decanethiol (DT) and 2-mercapto-3-n-octylthiophene (MOT) were used as hydrophobic substrates. The DT SAM is a closely packed and organized monolayer, which can effectively block the underlying gold and inhibit a variety of solution species including organic and inorganic molecules from penetrating, whereas the MOT monolayer is poorly packed or disorganized (because of a large difference in dimension between the thiophene head and the alkylchain tail) and permeable to many organic probes in aqueous solution but not to inorganic probes. Thus, the MOT monolayer provides a more energetically favorable hydrophobic surface for the penetration and adsorption of organic species than the DT monolayer. This hypothesis is supported by experiments in which the density of hydrophobically immobilized nanoparticles on the MOT SAM is much larger than that on the DT SAM. The results also suggest new approaches for modification of macroscopic surfaces with nanoscopic particles.     

Mixed charged zwitterionic self-assembled monolayers as a facile way to stabilize large gold nanoparticles

Here we report a facile way of stabilizing large gold nanoparticles (AuNPs) by mixed charged zwitterionic self-assembled monolayers (SAMs). The citrate-capped AuNPs with diameters ranging from 16 nm to even ～100 nm are well stabilized via a simple place exchange reaction with a 1:1 molar ratio mixture of negatively charged sodium 10-mercaptodecanesulfonic acid (HS-C10-S) and positively charged (10-mercaptodecyl)-trimethyl-ammonium bromide (HS-C10-N4). The 16 nm AuNPs protected by mixed charged zwitterionic SAMs not only show much better stability than the single negatively or positively charged AuNPs, but also exhibit exciting stability as well as those modified by monohydroxy (1-mercaptoundec-11-yl) tetraethylene glycol (HS-C11-EG4). Importantly, 16 nm AuNPs protected by mixed SAMs exhibit good stability in cell culture medium with 10% FBS and strong protein resistance, especially with excellent resistance against plasma adsorption. Moreover, the mixed charged zwitterionic SAMs are also able to well-stabilize larger AuNPs with a diameter of 50 nm, and to help remarkably improve their stability in saline solution compared with HS-C11-EG4 protected ones. When it comes to AuNPs with a diameter of 100 nm, the mixed charged zwitterionic SAM protected nanoparticles retain a smaller hydrodynamic diameter and even better long-term stability than those modified by mercaptopolyethylene glycol (M(w) = 2000, HS-PEG2000). The above results demonstrated that the mixed charged zwitterionic SAMs are able to have a similar effect on stabilizing the large gold nanoparticles just like the single-component zwitterionic SAMs. Concerning its ease of preparation, versatility, and excellent properties, the strategy based on the mixed charged zwitterionic SAM protection might provide a promising method to surface tailoring of nanoparticles for biomedical application.     

X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure study of water adsorption on pyridine-terminated thiolate self-assembled monolayers

Adsorption of water on self-assembled monolayers (SAMs) of 4-(4-mercaptophenyl)pyridine on gold at low temperatures under ultrahigh vacuum conditions is studied by synchrotron radiation X-ray photoelectron and absorption spectroscopy. Water adsorption induces a strong modification of the chemical state of the pyridine N atoms at the SAM/ice interface, indicative for strong H bonding and partial proton transfer between water molecules and pyridine moieties. Additionally, the initial molecular orientation within the SAM is changed upon formation of an adsorbed water multilayer.     

Selective deposition in multilayer assembly: SAMs as molecular templates

Self-assembled monolayers (SAMs) on surfaces may be used as molecular templates for the selective deposition of polymer multilayer films. SAMs of ω-functionalized alkane thiolates are patterned onto gold surfaces with micron scale features using the microcontact printing method; glass substrates can also be patterned with trichloroalkylsilane SAMs. Patterned polymeric monolayer and multilayer films are adsorbed atop the SAM from dilute polymer solutions using ionic macromolecular self-assembly techniques which have been developed recently. The effects of polymer molecular weight and ionic content, as well as the use of a second SAM in the unpatterned regions to promote selectivity are discussed. Surface roughness, selectivity and other film properties are presented. It is demonstrated that this technique can be used successfully in the patterning of micron scale features with multilayers of low molecular weight upon adsorption from dilute solution.     

Enhanced stability of short- and long-chain diselenide self-assembled monolayers on gold probed by electrochemistry, spectroscopy, and microscopy

Well-ordered, compact, self-assembled monolayers (SAMs) of hexyl and dodecyl diselenides have been formed on oriented (111) gold surfaces. Monolayer formation has been effected by adsorption from neat diselenides as well as millimolar solutions of diselenides in alcohol. The monolayer formation is confirmed using electrochemical quartz crystal microbalance studies. The stability and permeability of the monolayers at various temperatures have been probed using reflection absorption infrared spectroscopy (RAIRS) and electrochemistry. The RAIRS studies in the dry state show the formation of highly ordered, compact structures when adsorbed from neat compounds compared to the monolayers adsorbed in the presence of alcohol. The monolayers adsorbed from neat diselenide are quite stable as a function of temperature irrespective of the chain length. The electrochemical studies based on the blocking behavior of the monolayers toward electron transfer between a diffusing species and the electrode surface reflect the stability and the compactness of the structure. The results point out that the presence of solvent molecules during the SAM formation hinders the organization of the monolayer structure, especially in the case of short-chain diselenide monolayers.     

Spontaneous Emulsification Produced by Chemical Reactions

Self-assembled monolayer (SAM) formation of alkanethiols with ionic, hydrophilic terminal functionalities onto various O(2) plasma/ethanol pretreated gold substrates was characterized to explore the effect of gold surface oxide on the SAM packing quality. Oxygen adsorption induced by the Au(2)O(3) surface residuals are observed on the plasma-oxidized and O(2) plasma/ethanol-rinsed pretreated Au surfaces while no obvious adsorbed oxygen is found on freshly coated and O(2) plasma/ethanol sonication pretreated Au substrates. A model for the formation of hydrophilic terminated SAMs, -OH, -COOH, and -PO(3)H(2) is proposed. According to this model, the ionic and/or other binding interactions between the surface Au(2)O(3) and the alkanethiol hydrophilic terminal end as well as the interactions between the terminal SAM functionalities could cause the packing disorder found on these three SAMs formed on Au substrates containing Au(2)O(3) surface species. Copyright 2001 Academic Press.     

DNA-modified electrodes; part 4: optimization of covalent immobilization of DNA on self-assembled monolayers

The covalent immobilization of DNA onto self-assembled monolayer (SAM) modified gold electrodes (SAM/Au) was studied by X-ray photoelectron spectrometry and electrochemical method so as to optimize its covalent immobilization on SAMs. Three types of SAMs with hydroxyl, amino, and carboxyl terminal groups, respectively, were examined. Results obtained by both X-ray photoelectron spectrometry and cyclic voltammetry show that the largest covalent immobilization amount of dsDNA could be gained on hydroxyl-terminated SAM/Au. The ratio of amount of dsDNA immobilized on hydroxyl-terminated SAMs to that on carboxyl-terminated SAMs and to that on amino-terminated SAMs is (3-3.5): (1-1.5): 1. The dsDNA immobilized covalently on hydroxyl-terminated SAMs accounts for 82.8-87.6% of its total surface amount (including small amount of dsDNA adsorbed). So the hydroxyl-terminated SAM is a good substrate for the covalent immobilization of dsDNA on gold surfaces.     

Phase dependent electrochemical properties of polar self-assembled monolayers (SAMs) modified via the fusion of mixed phospholipid vesicles

Unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and varying quantities of either 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol) (sodium salt) (DMPG) or 1,2-dimyristoyl-3-trimethylammonium-propane (chloride salt) (DMTAP) were used to deposit lipid bilayer assemblies on self-assembled monolayers (SAMs) on gold. The supporting SAMs in turn were composed of ferrocene-functionalized hexadecanethiol chains (FcC16SH) diluted to low coverage in 1-hydroxylhexadecanethiol (HOC16SH) or a single-component monolayer phase of the latter. The mass coverages of the DMPC/DMPG layers deposited in this way were measured using surface plasmon resonance (SPR) and found to decrease with an increasing content of DMPG in the vesicles. The SPR data show that the lipid assembly, while stable with respect to gentle rinsing in aqueous buffer, is reversible and the lipid adlayer is removable by immersion in a solvent such as ethanol. The effects of the adsorbed lipid layer on the electrochemical interactions of the hybrid lipid/SAM with several redox probes [e.g., K4Fe(CN)6, Ru(NH3)6Cl3, and CsHsFe-[(C5H4CH2N+H(CH3)2] were characterized using cyclic voltammetry (CV). At a composition of 5% DMPG in DMPC, the permeabilities of the probes through the lipid layer were affected significantly relative to that observed with a pure DMPC layer. These effects include a striking observation of an enhanced, ionic-charge-specific molecular discrimination of the electrochemical probes. At higher concentrations of the DMPG, significant permeation of the lipid adlayer was seen for all the probes. These latter changes are also attended by a significant increase in the capacitive currents measured in CV experiments as compared to those observed for either a pure SAM or one modified by only DMPC. This effect likely results from the influence of the charged lipid on the diffuse Gouy-Chapman electrolyte layer at the SAM interface. In contrast to the behaviors seen with DMPG, the incorporation of DMTAP into the adsorbed DMPC had no impact on the permeation of the adlayer by soluble redox probes as judged by the observed electrochemistry, a result that appears to correlate with a less ideal mixing of lipids in the DMPC/DMTAP system relative to that of a DMPC/DMPG mixture.     

Interaction of wheat germ agglutinin with an N-acetylglucosamine-carrying telomer brush accumulated on a colloidal gold monolayer

A disulfide-carrying telomer with many pendent N-acetylglucosamine (GlcNAc) residues (Cys-PMHGlcNAc) was obtained by photo-polymerization of 1-(6'-methacryloylaminohexyl)-2-N-acetoamido-2-deoxy d-glucopyranoside) (MHGlcNAc) using a benzyl N,N-diethyldithiocarbamoyl (BDC) derivative that shows abilities of initiation, transfer, and termination (iniferter). The disulfide-carrying telomer was accumulated on a monolayer of colloidal Au on a glass substrate, and the interaction of wheat germ agglutinin (WGA) with GlcNAc residue at the polymer brush-solution interface was examined by using the localized surface plasmon resonance (LSPR) technique. For comparison, an amphiphile carrying many pendent GlcNAc residues was also prepared with MHGlcNAc and a lipophilic radical initiator and was incorporated in a phospholipid liposome to examine interaction of the GlcNAc residue with WGA on the liposome surface using turbidity measurements. Both the colloidal gold optical device and the liposome showed a concentration-dependent specific binding of WGA, and the GlcNAc-carrying liposome had a detection limit of 100 nM for WGA, whereas that of the colloidal gold device was 10nM. The sugar-carrying telomer-coated device examined here is not only useful as a simple biosensor chip but is also expected to expand our knowledge of bio-related phenomena at the liquid-telomer brush interfaces on a colloidal Au.     

Electronic and structural properties of oligophenylene ethynylenes on Au(111) surfaces

The interaction of oligophenylene ethynylene (OPE) on the (111) surface of a gold slab resembling a self-assembled monolayer (SAM) is investigated using ab initio density functional theory calculations. The authors performed a full optimization including all atoms in the OPE and in the slab to better understand OPE adsorption on the surface. It is found that OPE has two energetically favorable adsorption sites on the Au surface with relatively different molecular geometries: the nontop site adsorption greatly modifies the (111) surface structure; however, the extensive electron interactions enable a delocalized electron density distribution, implying an improved conductivity between OPE and Au, and the top site which is 0.9 eV higher in energy than the nontop and features weaker Au-S bonds. Interestingly the on top configuration shows a strong spin imbalance along the molecule and the nontop shows a small spin imbalance on the surface. This feature is of strong interest for the development of resonators for the detection of chemical and biological agents. They have also calculated the frequency spectrum of these SAMs, which yield deformations in the gold surface yielding peak frequency shifts specific to each absorption site.     

Formation of ordered self-assembled monolayers by adsorption of octylthiocyanates on Au(111)

Self-assembled monolayers (SAMs) were formed by the spontaneous adsorption of octythiocyanate (OTC) on Au(111) using both solution and ambient-pressure vapor deposition methods at room temperature and 50 degrees C. The surface structures and adsorption characteristics of the OTC SAMs on Au(111) were characterized by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). The STM observation showed that OTC SAMs formed in solution at room temperature have unique surface structures including the formation of ordered and disordered domains, vacancy islands, and structural defects. Moreover, we revealed for the first time that the adsorption of OTC on Au(111) in solution at 50 degrees C led to the formation of SAMs containing small ordered domains, whereas the SAMs formed by vapor deposition at 50 degrees C had long-range ordered domains, which can be described as (radical3 x 2 radical19)R5 degrees structures. XPS measurements of the peaks in the S 2p and N 1s regions for the OTC SAMs showed that vapor deposition is the more effective method as compared to solution deposition for obtaining high-quality SAMs by adsorption of OTC on gold. The results obtained will be very useful in understanding the SAM formation of organic thiocyanates on gold surfaces.