ELECTROCHEMICAL POLYMERIZATION OF 5-CYANOINDOLE IN MIXED ELECTROLYTES OF BORON TRIFLUORIDE DIETHYL ETHERATE AND DIETHYL ETHER

High quality poly（5-cyanoindole） （P5CI） films were electrosynthesized by direct anodic oxidation of 5-cyanoindole on stainless steel sheet in the mixed electrolytes of boron trifluoride diethyl etherate （BFEE） and diethyl ether （EE） （by volume 1：1） ＋ 0,05 mol L^-1 Bu4NBF4. The film formed can be peeled off the electrode into freestanding films, The addition of EE into BFEE can improve the solubility of monomer. P5CI films obtained from this medium showed excellent electrochemical behavior with conductivity of 10^-2 S cm^-1, Structural studies showed that the polymerization of 5-cyanoindole occurred at the 2,3 position. As-formed P5CI films were thoroughly soluble in strong polar organic solvent dimethyl sulfoxide （DMSO） while partly soluble in tetrahydrofuran （THF） or acetone. Fluorescence spectral studies indicated that P5CI was a good blue-ight emitter.     

聚（3，4-二氯）噻吩的制备及表征

以四氯噻吩为原料,采用化学合成法制备了聚（3,4-二氯）噻吩．对影响合成材料结构规整度的溶剂极性进行了初步探讨,并采用元素分析、红外光谱、^13C NMR核磁谱等对目标产物进行了表征．结果表明,当采用极性较低的乙二醇二甲醚作溶剂时,可得到规整度较高的目标产物．     

（3S）-2,2-二甲基-3-苄氧基癸酸的合成

以(R)-pantolactone为原料，经还原、羟基保护、环合、开环、脱保护、氧化等8步反应，合成了(3S)-2，2-二甲基-3-苄氧基癸酸，总收率为40．0％．     

SYNTHESIS AND STRUCTURE OF （Me4N）[Mo（OC6H4S—o）3]

<正> (Me_4N)[Mo(OC_6H_4S-o)_3] ,Mr=542. 57,orthorhombic,space group Pnb21 with a = 22. 708(1),b = 9. 737(4),c=10. 486(2) A;V=2318. 6A3;Z=4,Dc = 1. 55g/cm3,final R=0. 064 and Rw=0. 074.μ=8. 3cm-1, F(000) = 1108,The atom Mo( V ) of the anion issix-coordinated to three oxygen and three sulfur atoms in a distorted octahedral geometry.     

Synthesis and Bioactivity of Novel Aminomethyl-2-（1, 2,4-triazol）-4, 4-dimethyl-3-pentanone （ol）

3, 3-Dimethyl-1-(1,2,4-triazol)-2-butanone was treated with aqueous formaldehyde to give an additional product, and subsequent elimination by acetic anhydride yielded 4,4-dimethyl-2-(1,2,4-triazol)-1-penten-3-one. Further addition with substituted amines provideda series of (1,2,4-triazol)-4,4-dimethyl-3-pentanone, which were then reduced by KBH4 to obtaina series of (1,2,4-triazol)-4,4-dimethyl-3-pentanol. Their structures were confirmed by ^1HNMR and elemental analysis. The results of bioassay showed that the title products possess good fungicidal activities.     

Synthesis and Crystal Structure of 4-[（1E）-（4-Hydroxy-3,5-dimethoxybenzylidene）-amino]-1,5-dimethyl-2-phenyl-2,3-dihydro-1H-pyrazol-3-one

The title compound (C20H21N3O4, Mr = 367.40) has been synthesized and its crystal structure was determined by single-crystal X-ray diffraction. The crystal is of orthorhombic, space group P212121 with a = 7.5143(15), b = 13.901(3), c = 18.545(4) , V = 1937.1(7) 3, Z = 4, Dc = 1.260 g/cm3, μ = 0.089 mm-1, F(000) = 776, the final R = 0.0616 and wR = 0.0912. X-ray diffraction reveals that the molecule adopts an E configuration about the central C=N double bond. The intermolecular O–H…O hydrogen bond stabilizes the crystal structure by causing the formation of a supramolecular architecture.     

3-次甲基（4-丁氧基苯胺）噻吩与吡啶、3-丁基噻吩共聚物的金属配合物催化法合成及性能

通过Schiff-base法合成了侧链含席夫碱的新型噻吩单体2,5-二溴-3-次甲基（4-丁氧基苯胺）噻吩,用Ni（Ⅱ）催化剂[二氯-1,3-双（二苯基磷）丙烷基镍（Ⅱ）]合成了新型共轭共聚物聚[3-次甲基（4-丁氧基苯胺）噻吩-共-3-丁基噻吩]（共聚物Ⅰ）和聚[3-次甲基（4-丁氧基苯胺）噻吩-共-吡啶]（共聚物Ⅱ）。采用FT-IR、1H-NMR对2种共聚物的化学结构进行了表征,利用UV-Vis、PL、循环伏安等测试方法对其进行光、电性能测试。结果表明：共聚物在氯仿溶液中发黄绿光,共聚物Ⅰ和共聚物Ⅱ的最大发射峰分别位于540 nm和516 nm,该类共聚物均具有一定的电化学活性。     

SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL PROPERTIES OF 4-[（4-HYDROXYBENZYLIDENE） AMINO] PHENOL AND ITS POLYMER

The oxidative polycondensation reaction conditions of 4-[(4-hydroxybenzylidene)amino]phenol(4-HBAP)were studied with H_2O_2,air oxygen and NaOCl in an aqueous alkaline medium between 50 and 90℃.The structures of the obtained monomer and polymer were confirmed by FT-IR,UV-Vis,~1H-and ~(13)C-NMR and elemental analysis.The characterization was made by TG-DTA,size exclusion chromatography(SEC)and solubility tests.At the optimum reaction conditions,the yield of poly[4-(4-hydroxybenzylidene amino)phenol](P-4-HBAP)was found to be 48.3%(for H_2O_2 oxidant),80.5%(for air O_2 oxidant)and 86.4%(for NaOCl oxidant).According to the SEC analysis,the number-average molecular weight(M_n),weight-average molecular weight(M_w)and polydispersity index(PDI)values of P-4-HBAP was found to be 8950,10970 g mol~(-1) and 1.225,respectively,using H_2O_2;and 11610,15190 g mol~(-1) and 1.308 respectively, using air O_2 and 7900,9610 g mol~(-1) and 1.216,respectively,using NaOCl.According to TG-DTA analyses,P-4-HBAP was more stable than 4-HBAP against thermal decomposition.The weight loss of P-4-HBAP was found to be 49.27% at 1000℃. The highest occupied molecular orbital(HOMO)and the lowest unoccupied molecular orbital(LUMO)values calculated from electrochemical measurement.Electrochemical energy gaps(E′_g)of 4-HBAP and P-4-HBAP were found to be-5.46, -5.28;-2.26,-2.67;3.20 and 2.61 eV,respectively.According to UV-Vis measurements,optical band gap(E_g)of 4-HBAP and P-4-HBAP were found to be 3.34 and 3.01 eV,respectively.Also,antimicrobial activities of 4-HBAP and P-4-HBAP were examined against selected some bacteria.The electrical conductivity of the polymer was measured after doping with iodine.     

聚（1-乙烯基-3-乙酸烷基酯咪唑）阳离子／P（MMA．VAc）聚合物电解质

合成了一系列由聚（1-乙烯基-3-乙酸烷基酯咪唑）阳离子和二（三氟甲基磺酰亚胺）阴离子（TFSI）组成的聚离子液体并进行了表征．热重分析（TGA）和电导率分析表明,在聚（甲基丙烯酸甲酯,醋酸乙烯酯）（P（MMA—VAc））基体中掺杂聚离子液体后,体系的热稳定性和离子电导率均大为改善,红外光谱（FT—IR）、示差扫描量热分析（DSC）、X射线衍射（XRD）和扫描电子显微镜（SEM）等测试结果亦可佐证．讨论了离子液体的结构以及不同种锂盐（LiC104,LiBF4,LiTFSI）对电解质性能的影响．由PIL／P（MMA—VAc）／LiTFSI组成的共混电解质膜,在可见光下透过率≥90％,可作为离子导电材料用于电致变色器件（ECD）,显示了其优良的电化学性能．     

ELECTROCHEMICAL COPOLYMERIZATION OF DIBENZOFURAN AND 3-METHYLTHIOPHENE IN BORON TRIFLUORIDE DIETHYL ETHERATE

The copolymerization of dibenzofuran(DBF)and 3-methylthiophene(MET)was successfully achieved electrochemically by direct anodic oxidation of the monomer mixtures in boron trifluoride diethyl etherate.The effects of applied polymerization potential and the monomer concentration ratios on the copolymerization were investigated by linear sweep voltammetry and cyclic voltammetry(CV).The structure of copolymer films were investigated by UV-Vis,infrared spectroscopy,thermal analysis.As-formed novel copolymers ...     

三氟化硼乙醚溶液中卤代芴的电化学聚合

在三氟化硼乙醚(BFEE)溶液中9-溴芴和9,9-二氯芴可以直接阳极氧化制备聚(9-溴芴)和聚(9,9-二氯芴).单体在BFEE中的起始氧化电位远低于在乙腈体系中的起始氧化电位.聚(9-溴芴)和聚(9,9-二氯芴)均可溶于强极性有机溶剂,如二甲基亚砜、四氢呋喃等,并分别表现出良好的蓝色和黄绿色发光性能,其电导率测定为10-1S/cm.红外光谱和核磁共振波谱表明聚合反应主要发生在2,7位.     

1,8-亚乙基萘在三氟化硼乙醚-聚乙二醇中的电化学聚合

在三氟化硼乙醚(BFEE)-聚乙二醇(分子量400,PEG400)混合电解质溶液中,1,8-亚乙基萘直接阳极氧化聚合可以获得自支撑聚(1,8-亚乙基萘)膜.单体在三氟化硼乙醚+10%PEG400中的起始氧化电位为0.95 Vversus SCE,远低于单体在0.1 mol.L-1四氟化硼四丁基胺-乙腈溶液中的起始氧化电位(1.38 VversusSCE).同时PEG400的加入可以有效改善单体在三氟化硼乙醚中的溶解性.UV-Vis,FTIR和1H-NMR确定了1,8-亚乙基萘在4,5位聚合,荧光光谱表明固态及可溶聚(1,8-亚乙基萘)膜是蓝色发光材料.     

四氢呋喃/三氟化硼乙醚混合电解质中咔唑的电化学聚合

在四氢呋喃/三氟化硼乙醚混合电解质中直接阳极氧化咔唑制备聚咔唑.单体的起始氧化电位为0.92 Vversus SCE,远低于单体在含0.1 mol.L-1Bu4NBF4的乙腈溶液中的起始氧化电位(1.36 Vversus SCE).在此体系中获得的聚咔唑膜具有良好的电化学活性和稳定性,其电导率为7.0×10-3S.cm-1.聚合物可部分溶解于二甲基亚砜等强极性有机溶剂.UV-Vis,FT-IR,1H-NMR证明聚合物共轭长链的形成.该体系中获得的聚咔唑是一种蓝光发射材料,并具有良好的热稳定性.     

三氟化硼乙醚中聚(N-甲基吲哚)的电化学合成

在三氟化硼乙醚(BFEE)溶液中N甲基吲哚可以阳极氧化聚合生成聚(N-甲基吲哚).单体在BFEE中的起始氧化电位为0.95V,远低于单体在CH3CN+0.1mol LBu4NBF4体系中的起始氧化电位(1.23V).BFEE中获得的聚(N-甲基吲哚)膜具有良好的电化学性质和荧光性质.红外光谱表明聚合反应发生在2,3位.     

三氟化硼乙醚/乙酸混合电解质中芴的电化学聚合

在三氟化硼V(乙醚):V(乙酸)=4:5的混合电解质体系中直接氧化芴,获得芴聚合物膜,其电导率为0.5 S cm-1,高于在纯三氟化硼乙醚中制得的聚芴的电导率0.25 S cm-1.在三氟化硼乙醚:乙酸=4:5的混合电解质体系中获得的聚芴膜具有良好的电化学性质和化学稳定性.FTIR,1H-NMR和量化计算表明反应发生在...     

在三氟化硼催化下硝基环氧丙烷的聚合和共聚合

硝基环氧丙烷可在三氟化硼乙醚-丁二醇系统催化下顺利地进行聚合和共聚合,得到侧链带硝基甲基的端羟基聚醚。预聚物与二异氰酸酯和甘油反应可进一步交联成为具有一定强度和弹性的胶片。研究了预聚物和胶片的某些特性。     

三氟化硼-乙醚络合物催化γ-戊内酯与ε-己内酯开环共聚的研究

以三氟化硼乙醚络合物为催化剂,进行了γ-戊内酯(γ-VL)与ε-己内酯(ε-CL)的本体开环共聚的研究.采用1H -NMR、13C- NMR证实了所得共聚物的结构,并对共聚物的分子量、组成、熔点等进行了表征.结果表明,在一定的条件下,难以均聚的γ-VL可与ε-CL发生共聚反应,从而在共聚物链结构中引入少量的γVL单元.γVL单元的引入使得共聚物的分子量和熔点下降.由K- T法估算出两种单体共聚的竞聚率分别为r(ε-CL)=17.6,r(γ-VL)=0.0078.     

ELECTROSYNTHESES OF FREE-STANDING POLY(THIOPHENE-3-ACETIC ACID) FILM IN MIXED ELECTROLYTES OF BORON TRIFLUORIDE DIETHYL ETHERATE AND TRIFLUOROACETIC ACID

High quality free-standing poly(thiophene-3-acetic acid)(PTAA),a water-soluble polythiophene derivative,was successfully electrosynthesized in boron trifluoride diethyl etherate(BFEE)+ 25%(by volume)trifluoroacetic acid(TFA)at lower potential(0.38 V versus Pt).The carboxyl group makes PTAA highly soluble in water,facilitating its potential application as a blue-light-emitting material.PTAA films with conductivity of 7 S cm1 obtained from this medium showed better redox activity and thermal stability.The structure and morphology of the polymer were studied by UV-Vis,FT-IR, ~1H-NMR spectra and scanning electron microscopy,respectively.     

Electrosynthesis of highly conducting poly(1,5-dihydroxynaphthalene) in BF3·Et2O

Direct anodic oxidation of 1,5-dihydroxynaphthalene (DHN), an important derivative of naphthalene, led to the formation of high-quality semiconducting poly(1,5-dihydroxynaphthalene) (PDHN) on stainless steel sheets in boron trifluoride diethyl etherate (BFEE). The onset oxidation potential of DHN in this medium was measured to be only 0.78 V vs. SCE, which was lower than that determined in traditional acetonitrile containing 0.1 mol/L tetrabutylammonium tetrafluoroborate (0.98 V vs. SCE). As-formed PDHN films showed good redox activity and stability, together with interesting electrochromic property from brown (doped) to yellow-green (dedoped). Structural characterization, including FTIR, ¹H NMR, and quantum chemistry calculations, indicated that the polymerization of DHN probably occurred at C₄ and C₈ positions. Moreover, thermal analysis revealed that PDHN displayed better thermal stability than that synthesized by chemical method. The fluorescence spectral studies, together with the electrical tests, showed that PDHN was a good blue light-emitter (fluorescence quantum yield higher than 0.1) with an electrical conductivity of as high as 0.46 S/cm.