Photochemistry of 1,3,5-trithianes in solution: Steady-state and laser flash photolysis studies

In this work, we characterized the direct photochemistry of a set of five structurally-related 1,3,5-trithianes. The compounds were 1,3,5-trithiane, the α- and β-isomers of the 2,4,6-trimethyl derivatives, and the α- and β-isomers of the 2,4,6-triphenyl derivatives. Under steady-state, 254-nm irradiation of acetonitrile solutions of all five trithianes, dithioesters of the form RC( = S)SCH(R)SCH₂R were identified and shown to be primary photoproducts (R = H, CH₃, or C₆H₅). Shorter dithioesters, RC( = S)SCH₂R, were also identified and shown to be secondary products. The presence of the dithioesters could be monitored by their strong absorption bands in the region of 310 nm. This same band was evident following the laser flash photolysis of the five trithianes. The laser-induced transient spectra showed another absorbing species (I) in all five trithianes. This species was not stable and showed a complementary decay that matched the growth of the stable photoproducts at 310 nm. This suggested that the intermediates (I) are the precursors of the corresponding dithioesters, RC( = S)SCH(R)SCH₂R. These correlated processes were related to monophotonic events. However, in the laser flash photolysis experiments in the triphenyl derivatives, there was an additional pathway for the formation of the dithioesters, and this was biphotonic. When the biphotonic formation of products was compensated for, RC( = S)SCH(R)SCH₂R formation quantum yields from steady-state and laser flash photolysis matched within experimental error. The absorption band of (I) varied systematically with substituents, 320 nm in 1,3,5-trithiane, 340 nm in the 2,4,6-trimethyl derivatives, and 420 nm in the 2,4,6-triphenyl derivatives. The nature of these intermediates (I) were discussed as resulting from CS bond cleavage, probably heterolytic.     

Liquid viscosity of low-GWP refrigerant mixtures (R32 + R1234yf) and (R125 + R1234yf)

In this work, the viscosity of R1234yf, (R32 + R1234yf), and (R125 + R1234yf) in one-phase liquid was measured. The combined expanded uncertainty of viscosity measurement apparatus of confidence of 0.95 (k = 2) is about 2.0%. The measurements of mixtures containing (30.0, 50.0, and 70.0) wt% R32 or R125 were carried out between T = (283.0 and 323.0) K (at intervals of T = 5 K) and P = (1.58 and 2.74) MPa, with a moving piston viscometer (VISCOpro 1600, accuracy ±1.0%) and a Coriolis flowmeter (Ultramass MKII, accuracy ±0.001 g/ml). The measured data were correlated with a hard-sphere (RSH) method and the Grunberg and Nissan method. The average absolute deviations are (2.2 and 3.3)% for the (R32 + R1234yf) and (R125 + R1234yf) mixtures by RSH method, (2.8 and 1.3)% for the (R32 + R1234yf) and (R125 + R1234yf) mixtures by Grunberg and Nissan method, while (3.5 and 2.4)% for the (R32 + R1234yf) and (R125 + R1234yf) mixtures by RefProp V9.1, respectively.     

Dialkyl- and diaryl-platinum(II) complexes with secondary phosphines: Preparation,structure and thermal reaction giving the metallopolymer

Alkyl and arylplatinum complexes with 1,5-cyclooctadiene ligand, [PtR₂(cod)] (R = Me, Ph, C₆H₄-p-CF₃, C₆F₅), react with secondary phosphines, PHR′₂ (R′ = i-Bu, t-Bu, Ph), to afford the mononuclear platinum complexes, cis-[PtR₂(PHR′₂)₂] (1a: R = Me, R′ = i-Bu; 1b: R = Me, R′ = t-Bu; 1c: R = Me, R′ = Ph; 2a: R = Ph, R′ = i-Bu; 2b: R = Ph, R′ = t-Bu; 2c: R = R′ = Ph; 3a: R = C₆H₄-p-CF₃, R′ = i-Bu; 3b: R = C₆H₄-p-CF₃, R′ = t-Bu; 3c: R = C₆H₄-p-CF₃, R′ = Ph; 4a: R = C₆F₅, R′ = i-Bu; 4c: R = C₆F₅, R′ = Ph) in 81–98% yields. Molecular structures of the complexes except for 1a, 1c and 2a were determined by X-ray crystallography. Complex 1b has a square-planar structure with Pt–C(methyl) bonds of 2.083(8) and 2.109(8) Å, while the Pt–C(aryl) bonds of 2b–c, 3a–c, 4a and 4c (2.055(1)–2.073(8) Å) are shorter than them. Thermal decomposition of 1b, 2a–c, and 3a–c releases methane, biphenyl or 4,4′-bis(trifluoromethyl)biphenyl as the organic products, which are characterized by NMR spectroscopy. The solid product of the thermal reactions of 2b and 2c were characterized as the metallopolymers formulated as [Pt(PR′₂)₂]_n (5b: R′ = ^tBu; 5c: R′ = Ph), based on the solid-state NMR and elemental analyses.     

Re-investigation of ortho-metalated N,N-dialkylbenzylamine complexes of rare-earth metals. First structurally characterized arylates of neodymium and gadolinium Li[LnAr4]

The influence of the ether ligand in [LnCl₃(solv)_n], solv = THF, DME; n = 1–3 in reactions with ortho-lithiated dimethyl-benzylamine Li(dmba) has been studied. An improved protocol towards homoleptic tris-aryl complexes of the type [Ln(dmba)₃], Ln = Y, Er and Yb has been developed and molecular structures of these complexes have been established by X-ray crystallography. For the first time stable homoleptic lithium ate-complexes of the type Li[Ln(dmba)₄] (Ln = Gd, Nd) have been isolated and structurally characterized. The success in their synthesis strongly depends on the choice of the appropriate [LnCl₃(solv)_n] precursor, such as [GdCl₃(dme)₂], [NdCl₃(dme)], and THF-free reaction conditions. Factors influencing on possible degradation pathways of lanthanide tris-aryl complexes with dmba-type ligands are discussed.     

A green resolution–separation process for aliphatic secondary alcohols

In order to obtain both enantiomers of aliphatic secondary alcohols via a greener method, the four-step resolution–separation process involving lipase-catalyzed enantioselective esterification and hydrolysis as well as two separation procedures both via heterogeneous azeotropic distillation was developed. (S)-2-Pentanol (ee = 98.6%), (R)-2-pentanol (ee >99%), (S)-2-octanol (ee = 98.2%), and (R)-2-octanol (ee = 98.5%) were all produced in high purity (>98%) and high yield (>90%). In addition to the two model substrates, this method could also be applied to the resolution of other aliphatic secondary alcohols.     

Versatile Ru-based metathesis catalysts designed for both homogeneous and heterogeneous processes

The synthesis of new ruthenium-based catalysts applicable for both homogeneous and heterogeneous metathesis is described. Starting from the Hoveyda-Grubbs first generation (1) and the Hoveyda-Grubbs second generation (2) catalysts the homogeneous catalysts [RuCl((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (4: R = Et, R′ = H; 5: R = R′ = Me) (SIMes = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) were prepared by substitution of one chloride ligand with trialkoxysilyl functionalized silver carboxylates (RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COOAg (3a: R = Et, R′ = H; 3b: R = R′ = Me). These homogeneous ruthenium-species are among a few known examples with mixed anionic ligands. Exchange of both chloride ligands afforded the catalysts [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (9: R = Et, R′ = H; 11: R = R′ = Me) and [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(PCy₃)] (8: R = Et, R′ = H; 10: R = R′ = Me). The reactivity of the new complexes was tested in homogeneous ring-closing metathesis (RCM) of N,N-diallyl-p-toluenesulfonamide and TONs of up to 5000 were achieved. Heterogeneous catalysts were obtained by reaction of 4, 5 and 8–11 with silica gel (SG-60). The resultant supported catalysts 4a, 5a, 8a–11a showed reduced activity compared to their homogenous analogues, but rival the activity of similar heterogeneous systems.     

Molecular switching complexes with iron and tin as central atom

The precursor [Fe^III(L)Cl] (LH₂ = N,N′-bis(2′-hydroxy-benzyliden)-1,6-diamino-3-N-hexane is a high-spin (S = 5/2) complex. This precursor is combined with the bridging units [Sn^IV(X)₄] (X = CN^?, NCS^?) to yield star-shaped pentanuclear clusters, [(LFe^III–X)₄Sn]Cl₄. For X = CN^? the ⁵⁷Fe-Mössbauer data show a multiple spin transition between iron(III) in the high-spin and low-spin state, while the ^119mSn-Mössbauer data indicate a valence tautomerism between Sn(IV) and Sn(II). Changing the bridging unit from X = CN^? to X = NCS^? turns the switchability off.     

Synthesis,characterization, and structures of arylaluminum reagents and asymmetric arylation of aldehydes catalyzed by a titanium complex of an N-sulfonylated amino alcohol

A series of phenylaluminum reagents AlPh_xEt_3?x(L) (x = 1–3) containing adduct ligand L [Et₂O, THF, OPPh₃, or 4-dimethylaminopyridine (DMAP)] were synthesized and characterized. NMR studies showed that AlPh_xEt_3?x(L) (x = 1 or 2) exists as an equilibrium mixture of 3–4 species in solution. Solid-state structures of the phenylaluminum reagents reveal a distorted tetrahedral geometry. Asymmetric additions of phenylaluminum to 2-chlorobenzaldehyde were examined employing a titanium(IV) complex [TiL¹(OPrⁱ)₂]₂ 10 (H₂L¹ = (1R,2S)-2-(p-tolylsulfonylamino)-1,3-diphenyl-1-propanol) as a catalyst precursor. It was found that the adduct ligand L had a strong influence on the reactivity and the enantioselectivity in asymmetric phenyl additions to aldehydes. The phenylaluminum reagents with OPPh₃ or DMAP were unreactive toward aldehydes, and AlPh₃(THF) was found to be superior to AlPh₃(OEt₂) or AlPhEt₂(THF). Asymmetric aryl additions of AlAr₃(THF) to aldehydes employing a loading of 5 mol % titanium(IV) complex 10 with a strategy of a slow addition of the aldehydes over 20 min were conducted, and the reactions produced optically active secondary alcohols in high yields with excellent enantioselectivities of up to 94% ee.     

Functional contribution of coenzyme specificity-determining sites of 7α-hydroxysteroid dehydrogenase from Clostridium absonum

Studies of the molecular determinants of coenzyme specificity help to reveal the structure-function relationship of enzymes, especially with regards to coenzyme specificity-determining sites (CSDSs) that usually mediate complex interactions. NADP(H)-dependent 7α-hydroxysteroid dehydrogenase from Clostridium absonum (CA 7α-HSDH), a member of the short-chain dehydrogenase/reductase superfamily (SDRs), possesses positively charged CSDSs that mainly contain T15, R16, R38, and R194, forming complicated polar interactions with the adenosine ribose C2 phosphate group of NADP(H). The R38 residue is crucial for coenzyme anchoring, but the influence of the other residues on coenzyme utilization is still not clear. Hence, we performed alanine scanning mutagenesis and molecular dynamic (MD) simulations. The results suggest that the natural CSDSs have the greatest NADP(H)-binding affinity, but not the best activity (k_cat) toward NADP⁺. Compared with the wild type and other mutants, the mutant R194A showed the highest catalytic efficiency (k_cat/K_m), which was more than three-times that of the wild type. MD simulation and kinetics analysis suggested that the importance of the CSDSs of CA 7α-HSDH should be in accordance with the following order R38 > T15 > R16 > R194, and S39 may have a supporting role in NADP(H) anchoring for mutants R16A/T194A and T15A/R16A/T194A.     

Stability of carbon-supported palladium nanoparticles in alkaline media: A case study of graphitized and more amorphous supports

The stability and degradation mechanism of graphitized (Graphene nanosheets) and more amorphous (Vulcan XC-72R) carbon-supported palladium nanoparticles was investigated. Coupling identical-location transmission electron microscopy (ILTEM) and electrochemistry enabled to correlate the distribution of the Pd nanoparticles under accelerated stress test (up to 1000 cycles between 0.1 and 1.23 V vs. RHE, in a 0.1 M NaOH solution at 25 °C) with changes in electrochemical accessible surface area (ECSA). The carbon-supported Pd nanoparticles undergo similar rates of degradation in terms of electrochemical surface areas on both supports. However, their mechanisms of degradation differ: on amorphous carbon, the primary mode of degradation is Pd nanoparticles detachment (and minor agglomeration), whereas on graphitized supports it is more likely their coalescence and dissolution/redeposition. “Bulk” carbon-corrosion is negligible in both cases, as proven by ex situ Raman spectroscopy. So, using a graphitized carbon support (Graphene nanosheets) versus a more amorphous one (Vulcan XC-72R) does not enable to significantly depreciate the Pd/C catalyst degradation in alkaline media.     

Measurement and prediction of (solid + liquid) equilibria of (alkanediamine + biphenyl) mixtures

Diamines represent, besides many technically important classes of substance, a particularly interesting family of molecules for the purpose of testing group-contribution models.A differential scanning calorimetry (DSC) was used to determine binary (solid + liquid) phase equilibria for {diamines NH₂–(CH₂)_n–NH₂ (n = 6, 8, 9, and 12) + biphenyl} mixtures. Results obtained with this technique are compared with those predicted by modified UNIFAC (Larsen and Gmehling) and DISQUAC models. It was found out that all the systems are eutectic and deviations were observed between experimental and predicted SLE.     

Spin transition in heptanuclear star-shaped iron(III)–antimony(V) NCS- and CN-bridged compounds

The precursor [Fe^III(L)Cl] (LH₂ = N,N′-bis(2′-hydroxy-benzyliden)-1,6-diamino-3-azahexane) has been prepared and Mössbauer spectroscopy assigned a high-spin (S = 5/2) state at room temperature. The precursor is combined with the bridging units [Sb^V(X)₆]^? (X = CN^?, NCS^?) to yield star-shaped heptanuclear clusters [(LFe^III–X)₆Sb^V]Cl₅. The star-shaped compounds are in general high-spin systems at room temperature. On cooling to 20 K some of the iron(III) centers switch to the low-spin state as indicated by Mössbauer spectroscopy, i.e. multiple electronic transitions. While the cyano-bridged complex performs a multiple spin transition the thiocyanate-compound shows no significant population at both temperatures.     

Synthesis,structure and properties of Ag2PdO2

The first silver palladium oxide, Ag₂PdO₂, was synthesised from a co-precipitated oxide precursor by annealing at 423–823 K, applying an oxygen pressure of 73 MPa. The crystal structure has been determined from X-ray and neutron powder diffraction data. The new compound crystallises in space group Immm. The lattice constants as determined from X-ray powder diffraction are a=4.55523(5) Å, b=3.00803(3) Å and c=9.8977(1) Å. The crystal structure constitutes a new structure type showing some features in common with the Li₂CuO₂-type. Palladium is found in a nearly square planar arrangement while silver has an almost linear co-ordination. The overall structure can be considered as a rocksalt defect structure. Ag₂PdO₂ is diamagnetic and semiconducting. The band gap, estimated from conductivity measurements in the temperature range of 240–300 K, is 0.18(2) eV.     

Plasmon coupling of R6G-linked gold nanoparticle assemblies for surface-enhanced Raman spectroscopy

This paper presents the study of surface-enhanced Raman scattering (SERS) for Rhodamine 6G (R6G)-linked gold (Au) assemblies. The nano-assemblies fabricated with Au nanoparticles, having diameters (D) of ～5–40 nm, possessed interparticle gaps of ～0.03–0.2D, respectively. The R6G-linked Au assemblies displayed weak spectral shifts of localized surface plasmon resonance (LSPR) mode at shorter wavelength region and large fractional red-shifts Δλ ～ 0.07–0.47λ_o at longer wavelength region. The resonant spectral coupling of the nano-assemblies LSPR mode at the longer wavelength region and the optical excitation at ～785 nm, in addition to the highly localized hot spots, could support the large SERS enhancement of R6G-linked Au assemblies.     

Vibrational spectroscopic study of SiO2-based nanotubes

Novel organic–inorganic hybrid nanotubes containing silica and ethane (EtSNT), ethylene (ESNT) and acetylene (ASNT) units, as well as brominated ESNT (Br-ESNT) and glycine-modified Br-ESNT (Gly-ESNT) have been studied by IR and Raman spectroscopy. The results are compared with the spectral features for conventional silica nanotubes (SNT) and amorphous silica. Bands peculiar to organic moieties have been detected and assigned. Assignment of the silicate backbone vibrations was based on the results of normal coordinate calculations. Furthermore, characteristic silicate, so-called ‘nanotube’ vibrations have been identified and their band positions have been summarized to serve as a future reference for such compounds. SiOSi antisymmetric stretchings were observed in the range 1000–1110 cm⁻¹, while the symmetric stretchings appeared between 760 and 960 cm⁻¹ for EtSNT, ESNT and Br-ESNT.Force constants have been refined for models of the repeating structure units: O₃SiOSi(OSi)₃ for SNT and SiCH_nCH_nSi(OSi)₃ for organosilica nanotubes (n = 2, EtSNT; n = 1, ESNT and n = 0, ASNT). The calculated SiO stretching force constants were increased from 4.79 to 4.88 and 5.11 N cm⁻¹ for EtSNT, ESNT and ASNT, respectively. The force constants have been compared with those for several silicates and SiO bond length are predicted and discussed.     

Ruellia prostrata Poir. activity evaluated by phytoconstituents,antioxidant, anti-inflammatory,antibacterial activity,and in silico molecular functions

Ruellia prostrata Poir. has been used historically as an anti-cancer, wound healing agent and to treat gonorrhea. We aimed to determine the phytochemicals present in ethyl acetate extract of R. prostrata Poir. (EAERP). We sought to determine the antioxidant, anti-inflammatory, and antibacterial activities in vitro, and toxicity properties in vivo. We also analyzed the Prediction of Activity Spectra for Substances (PASS), physicochemical, ADMET, and drug-likeness properties of phytochemicals in EAERP. To determine phytoconstituents, preliminary phytochemical screening and GC–MS were performed, while FT-IR was used to identify functional groups. The antioxidant activity was evaluated using a DPPH scavenging assay, whereas BSA denaturation and RBC hemolysis inhibition were used to assess anti-inflammatory activity. An agar-well-diffusion assay was performed to estimate the antibacterial activity. Brine shrimp lethality bioassay and oral delivery of EAERP of single-dose were performed to determine cytotoxicity and acute toxicity, respectively. The phytochemical screening revealed the presence of phenols, triterpenoids, saponins, steroids, amino acids, and fat and fixed oils. FT-IR analysis of EAERP showed the presence of many functional groups: alcohols/phenols, carboxylic acids, aldehydes, alkanes, esters, amines, amides, aromatic hydrocarbons, sulfoxides, and alkyl halides. GC–MS revealed the presence of 39 phytoconstituents including steroids, consistent with compounds and functional groups found in preliminary screening and FT-IR. EAERP showed dose-dependent antioxidant activity with an IC₅₀ value of 21.402 µg/mL and anti-inflammatory activity with an IC₅₀ value of 20.564 µg/mL in RBC hemolysis inhibition and 21.115 µg/mL in BSA denaturation assays. EAERP also exhibited dose-related antibacterial activity. EAERP exerted cytotoxicity with an LC₅₀ value of 17.619 μg/mL and acute toxicity with an LD₅₀ value of 4095.328 mg/kg without any adverse effects. The PASS server also predicted that the phytoconstituents of EAERP have antioxidant, anti-inflammatory, and antibacterial activities with probable activity (Pa) ranging from 0.310 to 0.717. Analysis of physicochemical, ADMET, and drug-likeness properties revealed the drug-able efficacy and safety of most compounds. The findings of this study indicated that R. prostrata Poir. contains phytoconstituents with potent antioxidant, anti-inflammatory, and antibacterial activities. Taken together, our measurements suggest that R. prostrata Poir. is a prime candidate for further exploration as a potential therapeutic agent.     

(Solid + liquid) equilibria predictions of ionic liquid containing systems using COSMO-RS

(Solid + liquid) equilibria (SLE) prediction are an important phase equilibria property for ionic liquid (IL) mixtures especially when the IL exists as a solid. In this work, the SLE for the binary systems of (IL + thiophene) consisting of the ILs: n-butyl-4-methylpyridinium tosylate [BM₄Py][TOS], n-butyl-3-methylpyridinium tosylate [BM₃Py][TOS], n-hexyl-3-methylpyridinium tosylate [HM₃Py][TOS], and 1,4-dimethylpyridinium tosylate [M_1,4Py][TOS] are predicted using the quantum chemical based COSMO-RS (COnductor like Screening MOdel for Real Solvents) model. Initially, benchmarking studies are performed on binary mixtures which are known beforehand. The values of the predicted solubility are then compared with the experimental results by calculating the root mean square error (RMSE). The SLE predictions of the solubility of pyrene and dibenzothiophene in five different solvents were carried out giving an average RMSE of 4%. Further the applicability of COSMO-RS to binary systems consisting of (ionic liquid + alcohol) mixtures and (ionic liquid + hydrocarbons) are predicted. The ionic liquids concerned are n-butyl-3-methylpyridinium tosylate [BM₃Py][TOS] while the alcohols and hydrocarbons are 1-butanol, 1-hexanol, 1-octanol, 1-decanol, and benzene, toluene, ethylbenzene, n-propylbenzene respectively. The experimental data for the ionic liquid [BM₄Py][TOS] with thiophene gave the smallest deviation of 10.2%. The overall RMSE for IL–thiophene, IL–alcohol, and IL–hydrocarbons were 15%, 17.2% and 12.9% respectively. Thus the predicted solubility values were found to be in reasonable agreement with the experimental values.     

Excess properties and vapour pressure of (3-diethylaminopropylamine + n-alkanes)

The vapour pressures of liquid (3-diethylaminopropylamine (3-DEPA) + n-heptane) mixtures were measured by a static method between T = (303.15 and 343.15) K at 10 K intervals. The molar excess enthalpies H^E at T = 303.15 K were measured for the systems {3-DEPA + C_nH_2n+2 (n = 6, 7, 12)}. The molar excess Gibbs free energies G^E were obtained with Barker’s method and fitted to the Redlich–Kister equation. The Wilson equation was also used. Deviations between experimental and predicted G^E and H^E, by using group contribution UNIFAC (Gmehling version) model, were evaluated.     

Thermodynamic properties,detonation characterisation and free radical of N-acetyl-3,3-dinitroazetidine

N-acetyl-3,3-dinitroazetidine (ADNAZ) is an important precursor for synthesizing new multinitroazetidine energetic compounds. Its thermal behaviour was studied under a non-isothermal condition by DSC and TG/DTG methods, the results show that there are one melting process and one endothermic decomposition process. The specific molar heat capacity (C_p,m) of ADNAZ was determined by a continuous C_p mode of micro-calorimeter and theoretical calculation, and the C_p,m of ADNAZ was 240.37 J · K⁻¹ · mol⁻¹ at T = 298.15 K. The detonation velocity (D) and detonation pressure (P) of ADNAZ were estimated using the nitrogen equivalent equation according to the experimental density, the value of D and P are (6685.83 ± 3.12) m · s⁻¹ and (18.36 ± 0.02) GPa, respectively. The free radical signals of ADNAZ were detected by electron spin resonance (ESR) technique, which is used to estimate its sensitivity.