Optimization of supercritical fluid extraction of saikosaponins from Bupleurum falcatum with orthogonal array design

Supercritical fluid extraction (SFE) was used to extract saikosaponins a, c and d from the root of Bupleurum falcatum. An orthogonal array design L₉(3)⁴ was employed as a chemometric method for the optimization of the SFE conditions. The effects of four factors including pressure (30–40 MPa), temperature (40–50°C), ethanol concentration (60–100%) and time (2.5–3.5 h) on the yields of saikosaponins were investigated by a preparative SFE system in the SFE mode. Under the optimized conditions, namely 35 MPa of pressure, 45°C of temperature, 80% of ethanol concentration and 3.0 h of time, the yields of saikosaponin c, saikosaponin a, saikosaponin d, total saikosaponins and SFE extract were 0.16, 0.12, 0.96, 1.24 and 16.48 mg/g, respectively. Determinations of the saikosaponins were performed by HPLC.     

Supercritical fluid extraction of Kava lactones from Kava root and their separation via supercritical fluid chromatography

Summary Seven Kava lactones were extracted from Kava root using both pure and 15% ethanol modified CO₂. Most of the Kava lactones were extracted employing 100% CO₂ with an efficiency greater than 90% relative to conventional solvent extraction using organic solvents. Extraction efficiency did not increase significantly when using 15% ethanol-modified CO₂ as an extraction fluid. Separation of extracted Kava lactones was obtained using various packed columns and methanol-modified CO₂. An optimized separation was achieved using either an amino or protein C₄ column at 125 atm and 80°C. Semi-preparative separation of Kava lactones was also obtained using two columns connected in series.     

Improved supercritical fluid extraction of sulphonamides

Summary Different ways used for enhancing the yield of sulphonamides leached from solid supports are reported. Supercritical CO₂ and methanol-modified CO₂ were used as extractants of the target analytes and the impregnation of the solid sample with buffer, derivatization of the analytes and ion-pair formation were assessed. Only the sulphonamide/tetramethyl-ammonium ion-pairs are quantitatively extracted from the solid supports using pure supercritical CO₂, while the other modifications and the presence of a cosolvent lead to recoveries lower than 30% for most of the analytes. Individual separation/quantitation of the analytes was performed off-line using a liquid chromatograph.     

GC-MS of volatile components of Schisandra chinensis obtained by supercritical fluid and conventional extraction

In this paper, the volatile compounds of Schisandra chinensis obtained by different extraction techniques including supercritical fluid extraction (SFE), steam distillation (SD), Soxhlet extraction (SE) and ultrasound-assisted extraction (UAE) were investigated for the first time. The sample preparation procedure for GC-MS analysis of the volatile compounds was optimized and then 37, 45, 27 and 37 compounds were identified in the samples obtained by SFE, SD, SE and UAE methods, respectively. As the therapeutic effect of the traditional Chinese medicine is usually based on multifarious essential components or the combination of them instead of only one component, the volatile compounds were compared in groups with the extracts by SE, SD and UAE. This would be more reasonable to evaluate the effects of an alternative technique to extracting multifarious essential components. Among the identified components in the SFE extract, 32 compounds were the same as that by three conventional methods, accounting for 90.5% of the volatile compounds identified. However, as the volatile compounds were classed into groups, it was easy to see that the Schisandra chinensis oil extracted by SFE was made up largely of aromatics and sesquiterpenoids (52.1 and 27.6%, respectively), with less amounts of monoterpenoids and other compounds, distinguishing SFE from the conventional extractions.     

A new strategy for supercritical fluid extraction of copper ions

Complexation combined with supercritical fluid extraction was used to extract Cu²⁺. The effects of pressure, temperature, and total volume of CO₂ on the efficiency of extraction were systematically investigated. The extraction recovery was low (57.32%) only by pure supercritical CO₂. Addition of a suitable amount of methanol (v/v=5%) to supercritical CO₂ could enhance the extraction of Cu²⁺ (72.69%, relative standard deviation (R.S.D.)=2.12%, n=3), and the recovery increased largely (90.52%, R.S.D.=2.20%, n=3) in the presence of nonionic surfactant Triton X-100. Reverse micelle formation is presented as a new strategy of improving the extraction of metal ions with supercritical CO₂ in this paper.     

Orthogonal array design for the optimization of supercritical fluid extraction of baicalin from roots of Scutellaria baicalensis Georgi

Supercritical fluid was used to extract baicalin from the roots of Scutellaria baicalensis Georgi. An orthogonal array design (OAD), OA(9)(3(4)), was employed as a chemometric method for the optimization of the supercritical fluid extraction of baicalin from the herbal medicine. Four parameters, namely, modifiers, temperature and pressure of supercritical fluid, and the dynamic extraction time, were studied and optimized by a three-level OAD in which the interactions between the parameters were neglected. Determinations of the extracts were performed by high-performance liquid chromatography. The effects of parameters were studied using analysis of variance. The results showed that selection of the modifier was the main factor in attaining higher yields of baicalin. While the other three factors had some effect on the extraction of the compound, the effect was much less than that of the modifiers. 1,2-Propanediol-modified supercritical fluid was more effective than 95% ethanol-modified supercritical carbon dioxide or methanol-modified supercritical carbon dioxide for the extraction of baicalin from the solid matrix. Finally, experimental conditions were proposed which can provide the highest extraction yield with respect to the considered factors.     

Quantitative analysis of polymer additives in low density polyethylene using supercritical fluid extraction/supercritical fluid chromatography

Analysis of low concentration polymer additives has been a challenging problem. The commonly used methods of analysis involve the initial extraction of polymer additives with solvents, often in a Soxhlet apparatus, followed by liquid, size exclusion, or gas chromatography. This paper describes the on-line super-critical fluid extraction (SFE)-supercritical fluid chromatographic (SFC) determination of different additives from low density polyethylene. Cryogenic collection was used as an interface between SFE and SFC to focus the extraction eluate before transfer to an analytical SFC column for quantitative analysis.     

Application of supercritical fluid extraction and supercritical fluid chromatography to the production of taxanes as anti-cancer drugs

The supercritical fluid extraction (SFE) of taxicin from the dried needles of the English yew tree, Taxus baccata is described. Analysis by supercritical fluid chromatography (SFC) and proton NMR spectroscopy was used to confirm identity and purity. The extraction efficiency of SFE is comparable with that obtained using liquid solvents. Such taxanes may be used semi-synthetically to prepare potential anti-cancer drugs.     

Simplex optimization of extraction of soybean oil by supercritical pentane

Summary Fractional factorial designs were used to estimate the relative significance of the effects of the variables on the extraction of soybean oil by supercritical pentane. Product recovery depends upon the pressure and the extraction time employed as well as on the size of the bean flour. On the other hand, the effect of temperature on the extraction process was negligible within the limits investigated. A modified simplex method was then used to determine optimum conditions for the most important variables to maximize product recovery. The extract obtained by SFE was compared to that obtained by a conventional extraction method.     

On-line coupled supercritical fluid extraction and chromatography for the determination of thiolcarbamate herbicides in soil matrix

Supercritical fluid extraction (SFE) was on-line coupled with supercritical fluid chromatography (SFC) for the determination of thiolcarbamate herbicides in soil matrix. Inert ODS-silica gel packings were used as a trap column for an interface between SFE and SFC and as an analytical column for the satisfactory separation of extracts. Thiolcarbamate herbicides could be extracted satisfactorily from the soil matrix, which had different characteristics. The results indicated that the proposed system was useful for the rapid determination of thiolcarbamate herbicides in soil matrices.     

Characterization of Semtex by supercritical fluid extraction and off-line GC-ECD and GC-MS

Researchers using electron capture for the detection of explosive vapors currently claim the ability to detect the presence of RDX in Semtex – a plastic explosive comprising hexahydro-1,3,5-trinitro-1,3,5-triazane (RDX) in a matrix of styrene-butadiene copolymer and hydrocarbon oil. The vapor pressure of RDX at room temperature is 0.006 ppb, and therefore well below the detection limit of electron capture detection (ECD). The positive response generated by ECD is, consequently, not from the presence of RDX, but from some other component. This paper describes the extraction and identification of several compounds in Semtex, along with the determination of which is responsible for the positive response of an ECD-based detector. From the results of supercritical fluid extraction and off-line gas chromatography combined with electron capture and mass spectrometric detection, it has been concluded that ethylene glycol dinitrate is the component responsible for the positive ECD response. This conclusion is based on the requirements necessary for ECD detection, i.e. electronegativity, and a sufficient vapor pressure. The other compounds present were eliminated as possible choices because they either can not be detected by an ECD or do not have sufficient vapor pressure under ambient conditions.     

Recent advances in sample introduction for supercritical fluid chromatography

New strategies for sample introduction in supercritical fluid chromatography are reviewed. Both open tubular and packed column systems are examined as the injection demands of each column type are addressed. In addition to advances made in solvent injection methods, supercritical fluid extraction (SFE) is discussed as a solventless injection technique for supercritical fluid chromatography.     

Enrichment of the thymoquinone content in volatile oil from Satureja montana using supercritical fluid extraction

Supercritical fluid extraction (SFE) of the volatile oil from Satureja montana L. was performed under different conditions of pressure (90 and 100 bar), temperature (40 and 50°C), mean particle sizes (0.4, 0.6 and 0.8 mm) and CO₂ flow rate (0.8, 1.1 and 1.3 kg/h) to understand the influence of these parameters on the composition and yield of this oil. The results were compared with those obtained for the essential oil isolated by hydrodistillation (HD). The volatile and the essential oil were analysed by GC and GC‐MS. The main compounds are carvacrol (52.2–62.0% for HD vs. 41.7–64.5% for SFE), thymol (8.6–11.0% for HD vs. 6.0–11.3% for SFE), p‐cymene (6.9–12.8% for HD vs. 6.0–17.8% for SFE), γ‐terpinene (6.4–9.4% for HD vs. 2.3–6.0% for SFE) and β‐bisabolene (2.0–2.7% for HD vs. 2.2–3.5% for SFE). The major difference between SFE and HD was the relative amount of thymoquinone, an oxygenated monoterpene with important biological activities, which can be ten‐fold higher in volatile oil (1.6–3.0 for SFE vs. 0.2% for HD). The morphology of the glandular trichomes of S. montana and the effect of the grinding process on them was also evaluated by SEM.     

Micelle-mediated extraction of tanshinones from Salvia miltiorrhiza bunge with analysis by high-performance liquid chromatography

The feasibility of employing non-ionic surfactant oligoethylene glycol monoalkyl ether (Genapol X-080) as an alternative and effective solvent for the extraction of tanshinones from Salvia miltiorrhiza bunge was studied for the first time. Various experimental conditions were investigated to optimize the extraction. Under optimum conditions, i.e. 10% Genapol X-080 (w/v), liquid/solid ratio of 20:1 (ml g⁻¹), ultrasonic-assisted extraction for 45 min, the extraction recovery of the tanshinones reached the highest value. When compared with commonly used solvents, 10% Genapol X-080 yielded almost the same extraction efficiency as methanol and dichloromethane-methanol (1:4). For the pre-concentration of tanshinones by cloud-point extraction (CPE), sodium chloride was added to the solution to facilitate the phase separation and increase the pre-concentration factor by reducing the volume of the surfactant-rich phase.     

Comparison of supercritical fluid extraction and liquid-liquid extraction for isolation of selected pesticides stored in freeze-dried water samples

Summary The stability of freeze-dried water samples spiked with eight agrochemicals (atrazine, simazine, linuron, carbaryl, propanil, fenitrothion, parathion and fenamiphos) were examined to evaluate their suitability as candidate reference materials for their determination in water samples. In addition, two different extraction procedures, liquid-liquid and supercritical fluid extraction, were compared for the isolation and trace enrichment of target analytes from freeze-dried water samples. Final analytical determinations were by gas chromatography-nitrogen phosphorus detection and electronic impact mass spectrometry, and by liquid chromatography-diode array detection. The whole methodology developed in this paper permitted the determination of pesticides spiked in water at levels varying from 0.03 to 6.9 g L^–1.