LIBS技术在土壤重金属污染快速测量中的应用

激光诱导击穿光谱(laser-induced breakdown spectroscopy,LIBS)作为一种很有前景的分析和测量技术在过去的10多年中已经显现出来.本文介绍了激光诱导击穿光谱的工作原理和定量定性分析的理论基础,综述了LIBS技术在土壤重金属As、Cd、Cr、Hg、Pb 和Zn等污染快速测量中的应用和仪器研究进展,分析了LIBS应用在该领域中存在的主要问题,对未来基于LIBS快速检测土壤重金属污染需要解决的定量测量和检测限等关键问题进行了探讨.     

激光诱导击穿光谱(LIBS)法微损快速检测党参中Pb

中药材重金属元素快速检测对污染监控及人们健康具有重要意义。激光诱导击穿光谱技术(Laser Induced Breakdown Spectroscopy, LIBS)属于一种快速检测方法,研磨压片等预处理方法相对样品消解已有所简化,但破坏了样品的物理性质,且不能满足中药材大宗品种、大批量检测需求。若进一步简化样品预处理,将更加凸显LIBS快速检测的优势。本文建立了激光诱导击穿光谱技术(LIBS)快速微损检测中药材样品重金属元素定标方法。线性相关系数R2为0.7764,建立的微损定标曲线线性可用于切片党参LIBS快速检测,对待测党参切片样品检测平均相对误差为3.74%,与电感耦合等离子体质谱法(ICP-MS)对比,相关系数R2为0.7957,验证了LIBS技术微损检测的可行性。制备的党参参考定标样品可多次重复用于待测样定标和仪器标定等。实验对待测党参样品仅进行切片处理,避免了研磨、压片等预处理,更加充分地体现LIBS快速检测的优势,为LIBS技术应用于中药材重金属元素快检等领域提供了一种新方法。     

激光诱导荧光辅助激光诱导击穿光谱检测有源发光玻璃中的微量元素

在有源发光玻璃的制备过程中,通常需要掺杂微量元素,用于改善玻璃的发光性能,因此在生产过程中进行快速检测非常重要.本实验针对激光诱导击穿光谱技术(LIBS)分析玻璃中微量元素灵敏度不足的问题,利用激光诱导荧光辅助激光诱导击穿光谱技术(LIBS-LIF)检测了玻璃中3种微量元素Yb,Al和P.使用波长可调谐激光激发等离子体中的Yb+离子、Al原子和P原子,并对这3种粒子在激光诱导荧光中的跃迁过程进行了分析.结果表明,通过激光诱导荧光辅助激光诱导击穿光谱技术,Yb+离子、Al原子和P原子的光谱强度分别增强了23,50和8倍,大幅度提高了LIBS分析的灵敏度.     

基于LIBS的GdFe合金材料快速检测技术研究

为了明晰LIBS（激光诱导击穿光谱）技术检测稀土合金材料的光谱特点,进一步开发基于LIBS的快速检测方法,推动LIBS技术在稀土领域的应用。本文利用激光诱导击穿光谱仪对GdFe合金材料的激发光谱,结合信号强度及背景噪音,研究确定了最佳设置参数。分别考察激光器和光谱仪的参数设置对光谱的影响,根据激发光谱中相关谱线的变化趋势,探讨GdFe合金材料的LIBS检测方法。实验发现,GdFe合金样品与激光孔(Laser aperture)的距离(Z值)、激光能量和积分时间是影响 LIBS光谱信号强度和背景噪音的关键参数。因金属和合金样品表面常覆盖氧化层,考察了脉冲激光的预剥蚀次数对光谱稳定性的影响,研究得出,在双脉冲均为164 mJ激光能量的激发下,预剥蚀1次可保证光谱效果。同时研究了两个激光器同时激发和延迟激发对GdFe合金光谱成因的影响,发现单脉冲激发与双脉冲同时激发所得光谱的信号强度并非两束脉冲单独激发的累加信号。通过光谱分析,确定了Z值0.8 mm、两个激光器的脉冲能量164 mJ、积分时间12 μs、脉冲延时时间0 μs,GdFe合金材料的光谱效果最佳,可为GdFe合金材料的LIBS检测方法建立提供参考,拓展LIBS技术在稀土领域的应用,为稀土合金产品的快速检测技术发展提供基础研究数据。     

便携式远程激光诱导击穿光谱系统及其定量分析性能

因高温、辐射等极端环境限制，核领域亟需具备在线快速检测特性的分析仪器。基于小型风冷脉冲激光器与小型光纤光谱仪实现了远程激光诱导击穿光谱技术（LIBS）装置的小型化，对该便携式远程LIBS系统的定量分析性能进行了研究，实现了5 m外样品的元素遥测。在单脉冲激光能量100 mJ，脉冲延时1.0 μs的分析条件下，实现了白水晶、陶瓷及铝合金样品中Mn、Si、Al、Na、Ba、Ca及Cr元素的激发，验证了LIBS技术对材料组分和物料成分的远程探测能力，对铝合金样品的定量分析结果显示，该远程遥测系统对铝合金样品定量测量结果的最大相对平均偏差为12%，具备执行核领域快速分析场景下的半定量检测能力。     

飞秒-纳秒双脉冲激光诱导击穿光谱(LIBS)技术对合金的定量分析

激光诱导击穿光谱(Laser-induced breakdown spectroscopy, LIBS)技术几乎不受聚变环境中的强磁场影响,是一种最有希望实现托卡马克装置中面向等离子体材料(Plasma facing materials, PFMs)原位在线诊断的技术,已被用于多个托卡马克PFMs壁诊断。然而,LIBS技术对PFMs表面元素的探测限、定量分析以及PFMs的服役状态判定依旧面临很大挑战。采用同轴飞秒-纳秒激光协同技术,建立了飞秒-纳秒双脉冲激光诱导击穿光谱(fs-ns-DP-LIBS)技术,通过高峰值功率、低激光能量的飞秒激光诱导等离子体,再用纳秒激光增强常规单脉冲LIBS技术信号发射强度,进而提升常规单脉冲LIBS的探测灵敏度,同时结合6种合金标准样品,采用fs-ns-DP-LIBS技术对样品中的主要元素进行了定量分析,并进一步结合机器学习方法对6种合金进行种类判别。结果显示：在纳秒单脉冲和飞秒单脉冲LIBS检测中,Ni、Fe和Mo在400～800 nm波段没有观察到明显特征峰,仅观察到Cr的特征峰;在飞秒-纳秒脉冲间2μs延时,NiⅠ498.02 nm、FeⅠ517....     

激光诱导击穿光谱(LIBS)技术在低碳钢铁冶金行业的应用

激光诱导击穿光谱技术(Laser induced breakdown spectroscopy,简称LIBS)是一种基于激光等离子体的发射光谱技术,具有样品制备简单,分析迅速,多元素同时分析,现场在线和远程分析等独特优势,已在钢铁冶金领域取得了越来越广泛的应用与发展。综述了近年来LIBS技术在钢铁冶金领域的应用研究进展,从冶金生产的全流程进行介绍,包括矿石、熔融钢水/铁水、钢铁产品及炉渣和废气分析。同时,还总结了LIBS技术在钢铁冶金领域应用的优点和缺点,并对该技术的应用前景及未来发展方向进行展望。     

化学计量学在激光诱导击穿光谱分析中的研究进展

激光诱导击穿光谱作为一种新兴的元素分析技术,具有实时在线、非接触、多元素同时检测等优点,是光谱分析领域内的一种前沿性分析手段.然而,如何从复杂大量的激光诱导击穿光谱数据提取有用信息,提高其定性、定量分析准确度是激光诱导击穿光谱技术目前面临的难题.化学计量学作为多学科交叉的化学分支学科,在数据处理、信号解析和模式识别等方面具有优势,能够解决传统化学研究方法难以解决的一些复杂问题.本文从光谱数据预处理、定性和定量分析三方面综述了近年来化学计量学方法在激光诱导击穿光谱中的研究进展.     

基于多光谱特征融合技术的面粉掺杂定量分析方法

提出了一种基于拉曼光谱技术(Raman)和激光诱导击穿光谱技术(LIBS)的多光谱特征融合技术(MFFT),利用拉曼光谱中分子组分信息和激光诱导击穿光谱中原子组分信息之间的互补特性,采用自适应小波变换(AWT)-竞争性自适应加权(CARS)-偏最小二乘回归(PLS)建模技术,获取了面粉体系更为全面的特征信息。在多光谱特征融合技术中,首先采用AWT-CARS方法分别提取拉曼光谱和激光诱导击穿光谱中的特征变量,然后将两者的特征变量融合为一个向量,采用PLS方法构建MFFT模型,实现了面粉掺杂物的定量分析。通过对二氧化钛、硫酸铝钾等面粉掺杂体系建模分析,考察MFFT模型的有效性。结果表明,与单一拉曼光谱技术或激光诱导击穿光谱技术建立的预测模型相比,MFFT模型显著提升了模型的预测性能,二氧化钛和硫酸铝钾预测模型的线性相关系数分别从相对较差的Raman模型的0.884、0.877提升到0.981、0.980,其预测均方根误差分别从相对较差的Raman模型的0.151、0.154降低到0.069、0.068。表明多光谱特征融合技术可以准确提取Raman光谱中的分子信息和LIBS光谱中的元素信息,使其互为补充、互为校正,进而有效克服面粉基质对掺杂组分定量分析的干扰,显著提高模型的预测精度。     

支持向量机结台主成分分析辅助激光诱导击穿光谱技术识别鲜肉品种

为提高激光诱导击穿光谱技术(Laser-induced breakdown spectroscopy,LIBS)对鲜肉品种的识别率,采用支持向量机结合主成分分析算法辅助LIBS技术对鲜肉品种进行识别.对鲜肉切片用载玻片压平,采用LIBS技术对鲜肉组织(猪肉、牛肉和鸡肉)表面进行光谱数据的采集,每种鲜肉采集150幅光谱并进行随机排列,取前75幅光谱作为训练集建立模型,后75幅作为测试集测试建模结果.研究选取K、Ca、Na、Mg、Al、H、O等元素的49条归一化谱线数据进行主成分分析,并用所得数据建立支持向量机分类模型.结果表明,通过主成分分析降维,输入变量从49个优化减少到18个,模型建模速度从88.91 s降至55.52 s,提高了支持向量机的建模效率;并使预测集的平均识别率提高到89.11%.本研究为激光诱导击穿光谱技术在鲜肉品种快速分类领域提供了方法和数据参考.     

激光诱导击穿光谱:从实验平台到现场仪器

激光诱导击穿光谱(Laser-induced breakdown spectroscopy, LIBS)技术利用激光实现对分析样品的快速原位剥蚀和光谱激发,是一种具有广阔应用前景的分析手段,尤其是在现场、原位分析中优势明显,快速原位的分析特点符合未来分析仪器的发展方向.近年来基于该技术开展各类仪器研发的相关工作,引起广大研究者的极大关注.本文综述了激光诱导击穿光谱仪器中关键部件的组成及发展,从便携式、手持式及远程系统三个方面综述了各类现场应用仪器的研发进展,并对未来发展方向进行了展望.     

Progress in Research and Application of Micro-Laser-Induced Breakdown Spectroscopy

The technique of micro-laser-induced breakdown spectroscopy (μLIBS) usually refers to analyzing the surface of the sample using a compact focused laser beam in the optical microscope range. Compared to conventional laser-induced breakdown spectroscopy (LIBS), it can provide more abundant form, structure, and content information on a smaller, less sample condition. Hence, the application field is very wide. In this paper, the basic status of μLIBS in the selection of laser source and the structure of optical path system is introduced, and its application in metal, semiconductor, animal and plant fields is reviewed. The existing problems and potential development direction is pointed out.     

Laser-induced breakdown spectroscopy: Time-integrated applications

Spectral analysis of the plasma produced by laser-induced breakdown was demonstrated to be an effective real-time technique for the detection of atomic constituents in gases and gas-entrained particulates. The time-integrated technique, LIBS (laser-induced breakdown spectroscopy), was applied to the detection of sodium and potassium in a coal gasifier product stream, of airborne beryllium, and of phosphorus, sulfur, and chlorine in various organic molecules. In a companion paper (following) the time-resolved technique will be discussed.     

Analysis of lead and sulfur in environmental samples by double pulse laser induced breakdown spectroscopy

In the present work, a model of double pulse laser-induced breakdown spectroscopy (LIBS) spectrometer has been developed and results from two different applications of double pulse LIBS for solving the problems of environmental interest are presented. In one case, laser induced breakdown spectroscopy has been applied to the determination of heavy and toxic metals (lead) in soil samples. In the second case, laser induced breakdown spectroscopy was used in preliminary experiments for the detection of sulfur content in coal, and on the basis of spectral features, ways to improve the sensitivity of laser induced breakdown spectroscopy detection of sulfur are proposed. The detection limit for lead in soil was estimated to be approximately 20 ppm that is lower than the regulatory standards for the presence of lead in soil.     

Laser-induced breakdown spectroscopy for detection of explosives residues: a review of recent advances, challenges, and future prospects

In this review we discuss the application of laser-induced breakdown spectroscopy (LIBS) to the problem of detection of residues of explosives. Research in this area presented in open literature is reviewed. Both laboratory and field-tested standoff LIBS instruments have been used to detect explosive materials. Recent advances in instrumentation and data analysis techniques are discussed, including the use of double-pulse LIBS to reduce air entrainment in the analytical plasma and the application of advanced chemometric techniques such as partial least-squares discriminant analysis to discriminate between residues of explosives and non-explosives on various surfaces. A number of challenges associated with detection of explosives residues using LIBS have been identified, along with their possible solutions. Several groups have investigated methods for improving the sensitivity and selectivity of LIBS for detection of explosives, including the use of femtosecond-pulse lasers, supplemental enhancement of the laser-induced plasma emission, and complementary orthogonal techniques. Despite the associated challenges, researchers have demonstrated the tremendous potential of LIBS for real-time detection of explosives residues at standoff distances. Figure This review discusses the application of laser-induced breakdown spectroscopy (LIBS) to the problem of explosive residue detection. LIBS offers the capability for real-time, standoff detection of trace amounts of residue explosives on various surfaces     

Characterization of coal fly ash components by laser-induced breakdown spectroscopy

The high sensitivity of laser-induced breakdown spectroscopy (LIBS) for the detection of most of the fly ash components enables the analysis of these residues produced during the combustion of coal. Fly ash consists of oxides (SiO₂, Al₂O₃, Fe₂O₃, CaO…) and unburnt carbon which is the major determinant of combustion efficiency in coal fired boilers. For example, an excessive amount of residual carbon dispersed in the fly ash means a significant loss of energy (Styszko et al., 2004 [1]). Standard methods employed for the analysis of fly ash make not possible a control of boiler in real time. LIBS technique can significantly reduce the time of analysis, in some cases even an online detection can be performed. For this reason, some studies have been addressed in order to demonstrate the capability of the laser-induced breakdown spectroscopy technique for the detection of carbon content in high pressure conditions typical of thermal power plants (Noda et al., 2002 [2]) and for the monitoring of unburnt carbon for the boiler control in real time (Kurihara et al., 2003[3]).In particular, the content of unburnt carbon is a valuable indicator for the control of fly ash quality and for the boiler combustion. Depending on this unburnt carbon content, fly ash can be disposed as an industrial waste or as a raw material for the production of concrete in the construction sector. In this study, analyses were performed on specimens of various forms of preparation. Pressed pellets were prepared with two different binders. Presented results concern the nature and amount of the binder used to pelletize the powder, and the laser-induced breakdown spectroscopy parameters and procedure required to draw calibration curves of elements from the fly ash. Analysis “on tape” was performed in order to establish the experimental conditions for the future “online analysis”.     

Optimization of the spectral data processing in a LIBS simultaneous elemental analysis system

An instrumentation variation on laser-induced breakdown spectroscopy (LIBS) is described that allows simultaneous determination of all detectable elements using a multiple spectrograph and synchronized, multiple CCD spectral acquisition system. The system is particularly suited to the rapid analysis of heterogeneous materials such as coal and mineral ores. For the analysis of a heterogeneous material the acquisition cycle typically stores 1000 spectra for subsequent filtering and analysis. The incorporation of an effective data analysis methodology has been critical in achieving both accurate and reproducible results in the analysis of powders with the technology. Using naturally occurring gypsum as the optimization matrix, various data analysis techniques have been investigated including: using pulse-to-pulse internal standardisation; data filtering; and spectral deconvolution. The incorporation of normalization of the elemental emission to the total plasma emission intensity has been found to yield the single biggest improvement in accuracy and precision. Spectral deconvolution has been found to yield further improvement and is particularly relevant to the analysis of complex materials such as black coal. The use of pulse-to-pulse intensity normalization has the further benefit of extending the period between instrument recalibration, thus enhancing the ease of use of the device. The benefit of the optimized data analysis methodology is revealed in the determination of eight elemental components of gypsum (Na, Ca, Mg, Fe, Al, Si, Ti and K) where a typical absolute analysis accuracy of ±10% is obtained. These results compare favourably to analysis by conventional techniques for these materials. The analysis accuracy and repeatability is further demonstrated by the determination of the concentrations of these elements in a black coal sample.     

Fast and sensitive trace metal analysis in aqueous solutions by laser-induced breakdown spectroscopy using wood slice substrates

To perform fast and sensitive trace metal analysis in aqueous solutions by laser-induced breakdown spectroscopy (LIBS) based on only one single-pulse laser system, a wood slice has been used as a liquid absorber to transform liquid sample analysis to solid sample analysis using LIBS. High detection sensitivity and good reproducibility can be achieved with this approach. Calibration curves for five metal elements, Cr, Mn, Cu, Cd, and Pb under trace concentrations, have been obtained, and the limits of their detection were determined to be in the range of 0.029–0.59 mg L^− 1, 2–3 orders better than those obtained by directly analyzing liquid samples where the laser was focused on a liquid surface. The wood slice was very easy to handle and thus, the whole analysis process took only 4–5 min for each sample. This approach provides a more practical approach for fast and sensitive metal element analysis in aqueous solutions using LIBS, which is especially useful for monitoring toxic heavy metals in water.     

Quantitative elemental analysis of nutritional,hazardous and pharmacologically active elements in medicinal Rhatany root using laser induced breakdown spectroscopy

Rhatany roots (RRs) have been used in indigenous systems of medicines to treat many common illnesses due to the presence of highly active astringent and antiviral biochemical constituents that possess strong therapeutic and pharmacological properties. Due to its widespread use, the accurate knowledge on the elemental composition of this medicinal plant can set a pharmacological research platform to investigate the effect of certain elements, and their ions in mediating the human metabolism and therapy. In this work calibration-free laser-induced breakdown spectroscopy (CF-LIBS) is used to detect the elements present in RRs sample, by analyzing the characteristic emission wavelengths and their respective intensities in the laser induced plasma, without the need for using any calibration standards or methods. Many nutritional elements, which are of human health significance and instrumental in mediating the established biological activities of RRs, were identified in a relative abundance. In addition to this, our analysis identified the trace level of a few toxic elements, whose overdose due to reckless intake wreaks havoc to human health and wellbeing. The reliability of qualitative and quantitative detection of the elements in RR by LIBS were validated by the standard inductively coupled plasma optical emission spectroscopy (ICP OES), the results of which are in good agreement with LIBS data with better relative accuracy. Also, in order to discriminate, and single out any two elements with the overlapping emission wavelength in LIBS, X-ray photoelectron spectroscopy was also carried out, which in its own right is in good agreement with the elemental analysis of LIBS in general.