Investigation of the structure of cellulose in LiCl/DMAc solution and its gelation behavior by small-angle X-ray scattering measurements

Cellulose gels were prepared from cellulose in lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) solution. When the cellulose concentration in the solution is above the one at which cellulose molecules overlap, cellulose gels were formed. While the gel prepared by the addition of water was turbid, the one prepared by the ion exchange was colorless, transparent, and optically anisotropic. In order to explain this gelation behavior of cellulose, small-angle X-ray scattering (SAXS) measurements of the cellulose solutions and the gels were performed. The SAXS profiles of the cellulose solutions and the gels suggested that the large-scale fluctuation of the molecular chain density in the solution can be the origin of the molecular aggregates formed in the gel. Furthermore, the differences in the structure of the gels at the macroscopic and the molecular level were discussed in terms of the phase separation and the molecular association.     

Revisiting the Solution Structure of Ceric Ammonium Nitrate

Ceric ammonium nitrate (CAN) is a single‐electron‐transfer reagent with unparalleled utility in organic synthesis, and has emerged as a vital feedstock in diverse chemical industries. Most applications use CAN in solution where it is assigned a monomeric [Ce^IV(NO₃)₆]^2? structure; an assumption traced to half‐century old studies. Using synchrotron X‐rays and Raman spectroscopy we challenge this tradition, converging instead on an oxo‐bridged dinuclear complex, even in strong nitric acid. Thus, one equivalent of CAN is recast as a two‐electron‐transfer reagent and a redox‐activated superbase, raising questions regarding the origins of its reactivity with organic molecules and giving new fundamental insight into the stability of polynuclear complexes of tetravalent ions.     

Time-resolved small-angle neutron scattering study of polyethylene crystallization from solution

With time-resolved small-angle neutron scattering (TR-SANS), the crystallization kinetics of polyethylene from deuterated o-xylene solutions upon a temperature jump have been investigated. On the basis of a morphological model of coexisting lamellar stacks and coil chains in solution, experimental data have been quantitatively analyzed to provide structural information, such as the lamellar long period, the lamellar crystal thickness, the thickness of the amorphous layers between lamellae, the degree of crystallinity, and the crystal growth rate at various degrees of undercooling. The viability of TR-SANS for studying polymer crystallization is demonstrated through the consistency of these measurements and well-established knowledge of polyethylene crystallization from xylene solutions. One unique feature of this experimentation is that both the growth of lamellar crystals and the condensation of coil chains from solution are monitored simultaneously. The ratio of the crystal growth to the chain consumption rate decreases rapidly with a decreasing degree of undercooling. The Avrami analysis suggests that the growth mechanism approaches two-dimensional behavior at higher temperatures, and this is consistent with the observation of an increasing ratio of the sharp-surface area to the bulk crystal growth rate with temperature. The limitations, possible remedies, and potentials of TR-SANS for studying polymer crystallization are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3133–3147, 2004     

Semidilute solution structure of cellulose in an ionic liquid and its mixture with a polar organic co‐solvent studied by small‐angle X‐ray scattering

Structural and thermodynamic properties of cellulose solutions in the ionic liquid 1‐ethyl‐3‐methylimidazolium acetate (EMIMAc) and its binary mixtures with N,N‐dimethyl formamide (DMF) are studied by small‐angle X‐ray scattering (SAXS). These measurements indicate molecular dissolution of the cellulose chains without any significant aggregation. The power–law relationships of the evaluated correlation length and osmotic modulus to concentration exhibit exponents of ?0.76 and 2.06 for EMIMAc and ?0.80 and 2.14 for DMF/EMIMAc solvent mixture, respectively. Thus, these solvents can be considered to be good solvents for cellulose. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 888–894     

Cure temperature influence on natural rubber—A small angle X‐ray scattering study

To analyze the natural rubber behavior during vulcanization under different cure treatments, an experimental investigation using small angle X‐ray scattering was performed. To achieve this, a set of samples were prepared using sulfur and N‐t‐butyl‐2‐benzothiazole sulfenamide as accelerator and then cured at temperatures between 403 and 463 K reaching their optimum mechanical properties considering rheometer tests. The crosslink density of the samples was evaluated by means of the swelling technique in solvent. In the usual Lorentz corrected representation of the X‐ray scattered intensity, a maximum was observed in the plots corresponding to the cured samples, revealing a highly correlated structure. This maximum shifted toward higher values of the scattering vector when the cure temperature of the samples increased. This behavior is discussed in terms of the crosslinks type present in the vulcanized rubber network at different cure temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2966–2971, 2007     

Small-angle X-ray scattering on solutions of carboxymethylcellulose and bovine serum albumin

The existence of attractive interaction between CMC and BSA was evidenced in solution at pH higher than the protein isoelectric point by means of SAXS. Mixtures of BSA at 10 x 10(-3) g . mL(-1) and CMC at the concentration range of 1 x 10(-3) g . mL(-1) to 10 x 10(-3) g . mL(-1) were investigated. Upturns in the very low q range revealed the presence of aggregates when the CMC concentration was higher than 2 x 10(-3) g . mL(-1). The comparison between the calculated form factor with the experimental curves at intermediate and long q values indicated that the BSA molecules keep their native form in mixtures with CMC concentrations lower than 5 x 10(-3) g . mL(-1). Therefore, for CMC concentrations higher than 2 x 10(-3) g . mL(-1) the mixtures start to present aggregates and free BSA molecules coexisting in solution.     

Crystallization and chain conformation of semicrystalline and amorphous polymer blends studied by wide‐angle and small‐angle scattering

We examine the crystallization and chain conformation behavior of semicrystalline poly(ethylene oxide) (PEO) and amorphous poly(vinyl acetate) (PVAc) mixtures with wide‐angle X‐ray diffraction (WAXD), small‐angle X‐ray scattering (SAXS), and small‐angle neutron scattering (SANS) experiments. For blends with PEO weight fractions (wt_PEO) greater than or equal to 0.3, below the melting point of PEO, the WAXD patterns reveal that crystalline PEO belongs to the monoclinic system. The unit‐cell parameters are independent of wt_PEO. However, the bulk crystallinity determined from WAXD decreases as wt_PEO decreases. The scattered intensities from SAXS experiments show that the systems form an ordered crystalline/amorphous lamellar structure. In a combination of WAXD and SAXS analysis, the related morphological parameters are assigned correctly. With the addition of amorphous PVAc, both the average amorphous layer thickness and long spacing increase, whereas the average crystalline layer thickness decreases. We find that a two‐phase analysis of the correlation function from SAXS, in which the scattering invariant is linearly proportional to the volume fraction of lamellar stacks, describes quantitatively the crystallization behavior of PEO in the presence of PVAc. When wt_PEO is close to 1, the samples are fully spaced‐filled with lamellar stacks. As wt_PEO decreases from 1.0 to 0.3, more PVAc chains are excluded from the interlamellar region into the interfibrillar region. The fraction outside the lamellar stacks, which is completely occupied with PVAc chains, increases from 0 to 58%. Because the radius of gyration of PVAc with a random‐coil configuration determined from SANS is smaller than the average amorphous layer thickness from SAXS, we believe that the amorphous PVAc chains still persist with a random‐coil configuration even when the blends form an ordered structure. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2705–2715, 2001     

Anomalous small‐angle X‐ray scattering characterization of composites based on sulfonated poly(ether ether ketone), zirconium phosphates,and zirconium oxide

The morphology and distribution of zirconium oxide and zirconium phosphates in a matrix of sulfonated poly(ether ether ketone) (SPEEK) were investigated with anomalous small‐angle X‐ray scattering (ASAXS) and electron microscopy. ASAXS revealed that ZrO₂ was distributed in the SPEEK matrix in the form of nanoparticles smaller than 13 Å. A decrease in the conductivity suggested that the sulfonic groups were bound to the zirconium oxo species at the particle surface. Furthermore, two kinds of membranes containing zirconium phosphate were investigated. In one case, the phosphate was directly dispersed in the polymer solution for the casting of the membrane. In the other case, the phosphate was previously treated with n‐propyl ammonium and polybenzimidazole. From ASAXS data, the fractal dimension could be estimated. Mass‐fractal behavior was confirmed for the SPEEK membrane containing previously exfoliated zirconium phosphate, with aggregates of 6.3–165 Å. Surface‐fractal behavior was detected for membranes with untreated phosphates, with aggregates of 6.4–185 Å. The untreated phosphates caused an increase in the permeability, without changing the proton conductivity much. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 567–575, 2004     

Characteristic lengths and the structure of salt free polyelectrolyte solutions. A small angle neutron scattering study

We have studied salt free semi dilute polyelectrolyte solutions by small angle neutron scattering. Specific labelling associated with an extrapolation method has allowed the separation of the form factor of a single polyelectrolyte chainS ₁(q) and the structure factorS ₂(q). Two lengths are deduced from these two factors: the persistence lengthb _t which characterizes the electrostatic interactions along the chain by a fitting ofS ₁(q) with calculation of the scattering function for a wormlike chain, and fromS ₂(q),q _m ^–1 which characterizes the interactions between chains. These two lengths vary in the same way with the concentration of polyions (b _t C _p ^–1/2 ,q _m ^–1 C _p ^–1/2 ) and a constant relation exists between them: only one length is then necessary to describe the structure of polyelectrolyte soltuion on this semidilute concentration range.Laboratoire Commun CEA-CNRS.     

Small‐angle X‐ray scattering from poly(methylmethacrylate) in aqueous solutions of t‐butyl alcohol

Segment‐segment interaction of poly(methylmethacrylate) in t‐butyl alcohol‐water mixtures in poor solvent regime was studied. From the small‐angle X‐ray scattering measurements of semidilute solution range, the binary and ternary cluster integrals of polymer segments were determined from concentration dependence of the correlation length at various temperatures just above the upper critical solution temperature. We have calculated the contributions of the segment–segment interaction to the entropy and enthalpy from the measured temperature dependence of these interaction parameters and found that both quantities are negative and decrease with decreasing t‐butyl alcohol content. FT‐IR absorption peak of carbonyl group of poly(methylmethacrylate) shifts to the lower frequency with increasing water content. The implications of these findings are discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2195–2199, 1999     

Time‐resolved crystallization study of absorbable polymers by synchrotron small‐angle X‐ray scattering

Changes in the lamellar morphology that occurred during the quiescent isothermal crystallization of absorbable poly(p‐dioxanone) (PDS) and PDS/poly(glycolide) block copolymer were studied by synchrotron small‐angle X‐ray scattering. Important morphological parameters such as the lamellar long period, the thicknesses of the crystal and amorphous phases, and the scattering invariant were estimated as a function of time, and trends observed over a wide range of experimental conditions are discussed. Thicker but more perfect lamellae were detected at higher crystallization temperatures. The breadth of the normalized semilog Lorentz‐corrected intensity peak systematically decreased with increasing temperature. In addition, the values of the crystallization half‐time and the Avrami exponent (n = 2.5), determined from the real‐time changes in the lamellar development, showed superb agreement with the bulk crystallinity data generated from other experimental techniques, such as calorimetry and dielectric relaxation spectroscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 153–167, 2001     

A small-angle x-ray scattering study of starch gelatinization in excess and limiting water

The architecture of the starch granule, and its subsequent disruption due to the application of heat and water, known as gelatinization, is of wide interest. Small-angle x-ray scattering (SAXS) techniques have been used to study gelatinization in limiting and excess water. SAXS allows the absorption of water into the differing regions of the starch granule to be monitored. In excess water, a process of cooperative melting can be seen. In limiting water, the crystalline order melts at a higher temperature. These features have been studied, and observed features of the gelatinization related to those known from other techniques. © 1993 John Wiley & Sons, Inc.