基于光学频率梳的超低噪声微波频率产生

低噪声的微波频率在雷达,长基线干涉仪等领域有重要应用.基于光学频率梳产生的微波信号的相位噪声在1 Hz频偏处低于–100 dBc/Hz,在高频(> 100 kHz)处低于–170 dBc/Hz,是目前所有的微波频率产生技术中噪声最低的.文章介绍了光学频率梳产生微波频率的基本原理,对基于光梳产生的微波频率信号的各类噪声和抑制噪声的技术进行了分析和总结.随后对低噪声的测量方法进行介绍,并展示了几种典型的微波频率产生实验装置和结果.随着光学频率梳和噪声抑制技术的不断提升,基于光梳的极低噪声微波频率源将有更广泛的应用前景和应用领域.     

低相噪光学频率梳

光学频率梳是光钟的重要组成部分,相噪是光梳的基本特性。文章从光梳相噪的描述方法入手,对光学频率梳相噪产生的几种常见来源及相噪抑制技术进行了综述,详细介绍了业已实现的几种低相噪光学频率梳。文末展望了未来低相噪光学频率梳的发展新趋势。     

一种不等带宽光学梳状滤波器

提出了一种新型—Michelson—三面镜FabryPerot型50GHz不等带宽光学梳状滤波器设计方案,分析和模拟表明:该器件将一路信道间隔为50GHz的输入信号分离成信道间隔为100GHz的奇偶两路输出信号,其中在3dB处,奇数信道带宽大于30GHz用于10Gb/s传输,偶数信道带宽大于60GHz用于40Gb/s传输对于将来的40Gb/s系统,该器件具有优势.     

非线性光学相位共轭及其在激光工程中的应用

非线性光学相位共轭是现代光学一个有生命力的分支，文章简单介绍了它的原理和产生相位共轭波的几种基本途径，重点介绍了它在激光工程中的可能应用与进展，并指出有待研究解决的问题。     

光学相位共轭与四波混频

回顾并论述了光学相位共轭及四波混频技术的发展过程，介绍了四波混频相位共轭的原理、相关的介质材料、应用前景及技术发展趋势。     

基于小波变换的长距离光正交频分复用系统中四波混频引起的相位噪声分析

四波混频（FWM）效应是相干光正交频分复用（CO-OFDM）系统中最主要的非线性作用。分析基于小波变换的相干光正交频分（WT-OOFDM）系统原理,研究小波变换对FWM效应和光放大器自发辐射（ASE）引起的相位噪声的改善效果。数值结果表明,在采用常规G. 652光纤,100 Gbit/s的WT-OOFDM传输1500 km时,非线性相位噪声降低20%,总相位噪声降低15%。     

基于飞秒光学频率梳相关探测的绝对测距

提出了一种基于飞秒光学频率梳相关探测的绝对距离测量方法,通过检测测量信号与参考信号的相关条纹,实现了绝对距离测量。研究了一阶相关函数的测量模型,建立了基于非平衡迈克耳孙干涉光路的测量系统,通过拟合一阶相关函数包络并提取其峰值精确判断脉冲重合位置,获得了被测距离。设计并配合长导轨进行了3 m的绝对距离测量实验,并与商用干涉仪测量结果进行实时比对。基于大量实验数据,针对环境因素及系统误差进行了分析,并进行了误差消除与补偿。研究结果表明,所提方法在500 min长期测量中,在3 m的测量范围内的最大测量误差为5.85μm,测量标准差为2.20μm。     

一种光学频率梳绝对测距的新方法

采用光学频率梳的高精度绝对距离测量技术在航空航天、科学研究和工业生产等领域都发挥着重要作用.提出一种利用光学频率梳技术,通过检测光强实现绝对距离测量的新方法,研究了光学频率梳发出脉冲的时间相干性,分析了光强与被测距离之间的关系、干涉条纹峰值点位置与被测距离之间的关系.建立了基于Michelson干涉原理的测距系统,通过测量光强信息得到被测距离.以高精度纳米位移平台的位移量作为长度基准进行了绝对测距实验,在每个被测距离点都重复进行了10次实验,将10次实验测得的光强值取平均后用于距离的计算.实验结果表明,该方法可以实现绝对距离测量,在10μm测量范围内,最大误差为47 nm.因此,该方法可以应用于大尺寸高精度的绝对距离测量.     

双路光谱展宽的钛宝石飞秒光学频率梳系统

对中国计量科学研究院研制的第一代基于钛宝石飞秒激光器的光学频率梳系统进行了改进和优化. 通过对激光器重复频率、光谱展宽以及拍频信号探测等方面的改进,有效地降低了光谱展宽的复杂性,提高了飞秒光学频率梳系统的稳定性和激光频率测量的便捷性. 采用该光学频率梳系统对碘稳频532 nm和碘稳频633 nm激光绝对频率进行了测量,测量结果在国际推荐值的不确定度范围之内. 关键词： 光学频率计量 飞秒光学频率梳 光谱展宽     

2005年诺贝尔物理学奖与光学频率梳

光学频率梳是2005年诺贝尔物理学奖的重要内容，本文结合时间频率标准的发展历史，简要介绍了飞秒频率梳的基本原理、发明背景、科学意义及研究趋势．最后通过对该项发明的思考，浅谈了一点对科学研究方法的不成熟认识．     

High-resolution spectroscopy based on optical phase modulator and optical frequency comb

A phase modulation of an optical frequency comb has been applied to measure a fine spectrum in the 1.5 μm wavelength range by the optical heterodyne-detection method. The measurement frequency range covered 25 GHz, which satisfies the frequency interval of the optical frequency comb, with a spectral resolution of 1 MHz.     

利用光频梳提高台阶高度测量准确度的方法

提出一种利用光频梳和可调谐半导体激光器提高台阶高度测量准确度的方法. 通过将可调谐激光器锁定至光频梳,可对激光器的输出波长进行精确锁定与测量.基于可调合成波长链原理,利用锁定后的半导体激光器构建了一套台阶高度测量方案,该方案可消除合成波长误差对台阶高度测量不确定度的影响. 采用一台可调谐半导体激光器和光频梳进行了5000 s的连续锁定实验, 结果表明,锁定后的可调谐半导体激光器的频率稳定度达 1.8×10^-12.该方法的理论测量不确定度约为7.9 nm, 且测量结果可溯源至时间频率基准.     

飞秒光梳和碘稳频532nm Nd:YAG激光频率的测量

报道了中国计量科学研究院研制的基于掺钛蓝宝石(Ti:Sapphire)锁模飞秒脉冲激光器的飞秒光学频率梳装置，并利用此装置测量了碘稳频532nm(¹²⁷I₂R(56)32-10) Nd∶YAG固体激光器的频率，结果为 563260223512991±20Hz,相对不确定度为3.6×10^-14.这一数值是直接溯源到铯原子微波频率基准的光学频率测量结果.     

Precise determination of characteristic laser frequencies by an Er-doped fiber optical frequency comb

Femtosecond optical frequency combs correlate the microwave and optical frequencies accurately and coherently. Therefore, any optical frequency in visible to near-infrared region can be directly traced to a microwave frequency. As a result, the length unit "meter" is directly related to the time unit "second". This paper validates the capability of the national wavelength standards based on a home-made Er-doped fiber femtosecond optical frequency comb to measure the laser frequencies ranging from visible to near-infrared region. Optical frequency conversion in the femtosecond optical frequency comb is achieved by combining spectral broadening in a highly nonlinear fiber with a single-point frequency-doubling scheme. The signal-to-noise ratio of the beat notes between the femtosecond optical frequency comb and the lasers at 633, 698, 729, 780, 1064, and 1542 nm is better than 30 dB. The frequency instability of the above lasers is evaluated by using a hydrogen clock signal with a instability of better than 1×10^-13 at 1-s averaging time. The measurement is further validated by measuring the absolute optical frequency of an iodine-stabilized 532-nm laser and an acetylene-stabilized 1542-nm laser. The results are within the uncertainty range of the international recommended values. Our results demonstrate the accurate optical frequency measurement of lasers at different frequencies using the femtosecond optical frequency comb, which is not only important for the precise and accurate traceability and calibration of the laser frequencies, but also provides technical support for establishing the national wavelength standards based on the femtosecond optical frequency comb.     

All polarization-maintaining Er:fiber-based optical frequency comb for frequency comparison of optical clocks

We demonstrate an optical frequency comb (OFC) based on a turnkey mode-locked laser with a figure-9-shape structure and polarization-maintaining fibers, for the comparison of frequency among optical clocks with wavelengths of 698 nm, 729 nm, 1068 nm, and 1156 nm. We adopt a multi-branch approach in order to produce high power OFC signals at these specific wavelengths, enabling the signal-to-noise ratio of the beatnotes between the OFC and the clock lasers to exceed 30 dB at a resolution bandwidth of 300 kHz. This approach makes the supercontinuum spectra much easier to be generated than a single branch OFC. However, more out-of-loop fibers degrade the long-term frequency instability due to thermal drift. To minimize the thermal drift effect, we set the fiber lengths of different branches to be similar, and we stabilize the temperature as well. The out-of-loop frequency instability of the OFC due to the incoherence of the multi-branch is about 5.5×10^-19 for 4000 s, while the in-loop frequency instability of f_ceo and that of f_beat are 7.5×10^-18 for 1 s and 8.5×10^-18 for 1 s, respectively. The turnkey OFC meets the requirement for the comparison of frequency between the best optical clocks.     

光纤飞秒光学频率梳的研制及绝对光学频率测量

实验利用商品光纤飞秒激光器,自行构建了一套完整的光学频率梳系统,并获得了约30 dB信噪比的系统频移(f_ceo)信号.实现了光频梳重复频率(f_rep)信号及系统频移(f_ceo)信号的高稳定度锁定,并通过实验验证了光频梳锁定的跟踪精度.基于此稳定光频梳完成了对1064 nm碘稳频Nd:YAG固体激光器的绝对频率测量.实验结果表明,f_rep的跟踪精度在100 s取样时间时优于3.7×10^-14,测量得到的1064 nm激光器绝对频率为:281630111757362 Hz.这一测量结果与国际计量委员会(CIPM)给出的国际推荐值符合到不确定度之内. 关键词： 光纤光频梳 稳频 锁相技术 光学频率计量     

覆盖可见光波长的掺Er光纤飞秒光学频率梳

飞秒光学频率梳波长覆盖范围向可见光波长扩展对于碘稳频激光的绝对频率测量以及光钟研究中钟激光的绝对频率测量都具有十分重要的意义. 本文在自行研制掺Er光纤飞秒光学频率梳的基础上, 采用放大-倍频-扩谱的方案, 实现了激光输出波长向可见光波长的扩展. 掺Er光纤飞秒光学频率梳输出的一部分光激光脉冲, 功率约为8 mW, 首先经掺Er光纤放大器将功率提高到531 mW, 此后利用MgO: PPLN晶体倍频, 倍频后激光的功率为170 mW, 倍频效率为32%, 脉冲宽度为85 fs. 倍频后的激光通过光子晶体光纤进行光谱展宽. 通过优化入射光偏振状态可以实现波长覆盖500-1000 nm, 输出功率为85 mW, 耦合效率为50%. 采用小型化碘稳频532 nm Nd: YAG激光器输出激光与光学频率梳光谱展宽后的激光进行拍频可以获得30 dB的拍频信号. 覆盖可见光波长的掺Er光纤飞秒光学频率梳为可见光范围内激光的绝对频率测量提供了技术手段.     

High-resolution spectroscopy using interleaved 100 GHz optical frequency comb scanned by phase modulator

A high-resolution spectroscopy technique is proposed with an optical phase modulator combined with an interleaved optical frequency comb. The optical phase modulator and a frequency-locked laser light guarantee a spectral resolution less than 1 MHz on an absolute frequency axis. A wide measurement frequency range was realized using a 25 GHz optical frequency comb lying over a 4 THz frequency region. An extraction of single tooth intensity from the comb was realized by a heterodyne technique with a frequency-tunable laser used as a local oscillator. Also, the 25 GHz optical frequency comb was interleaved to generate four 100-GHz combs for removing the crosstalk from the 25 GHz neighboring sidebands in the teeth. This proposed spectroscopy technique was experimentally demonstrated with a resonator of less than 1 MHz linewidth and a H¹³C¹⁴N gas cell. Thus, a measurement frequency range higher than 4 THz (1530 nm-1560 nm) was confirmed with an effective spectral resolution 100 kHz order. In addition, the characteristics of the proposed system were compared with those of the previous system with a single-sideband (SSB) optical modulator.     

Monolithic CEO-stabilization scheme-based frequency comb from an octave-spanning laser

We demonstrate a carrier-envelope phase-stabilized octave-spanning oscillator based on the monolithic scheme. A wide output spectrum extending from 480 nm to 1050 nm was generated directly from an all-chirped mirror Ti:sapphire laser. After several improvements, the carrier-envelope offset(CEO) beat frequency accessed nearly 60 d B under a resolution of 100 k Hz. Using a feedback system with 50-k Hz bandwidth, we compressed the residual phase noise to 55 mrad(integrated from 1 Hz to 1 MHz) for the stabilized CEO, corresponding to 23-as timing jitter at the central wavelength of790 nm. This is, to the best of our knowledge, the smallest timing jitter achieved among the existing octave-spanning laser based frequency combs.