一种新型固体酸的制备及其在二（1-萘）甲烷加氢裂解中的催化性能

煤直接液化制取轻质燃料油和重要化学品是实现煤炭资源高效洁净利用的有效途径。煤液化的关键是在适当的温度、氢压、溶剂和催化剂存在的条件下,通过加氢裂解反应使连接煤中有机质大分子结构单元的较弱的桥键断裂生成可作为液体燃料的有机小分子,经后续的精细分离得到高附加值有机化学品和制备高性能炭材料前驱体,进而实现煤炭资源的高效利用。传统的煤液化工艺反应条件苛刻,需要高温和高氢压,导致能耗大和设备成本较高。酸性催化剂可使煤结构中的桥键在远低于煤热解反应的温度下断裂,并可有效除去煤中的杂原子,大幅提高液化油收率,因此酸性催化剂得到许多研究者关注。液体酸,如三氟甲磺酸、氟硼酸以及金属卤化物熔盐等均相酸性催化剂是煤液化工艺中常用的催化剂。虽然这些催化剂具有催化效率高和不易失活等优点,但大多数均相催化剂难以回收和再生,生产成本高,设备腐蚀性大,环境污染严重,因此在实际应用中受到限制。固体酸是具有广泛工业应用前景的环境友好催化剂,因而对固体酸的研究具有重要意义。本研究将液体三氟甲磺酸(TFMSA)通过浸渍吸附法负载到酸化的凹凸棒土(ATA)上制备了一种新型固体酸催化剂 TFMSA/ATA,并在相同条件下制备了 TFMSA/g-Al2O3和 TFMSA/ZSM-5作为对比。对TFMSA/ATA进行了透射电镜、傅里叶变换红外光谱、X射线光电子能谱、X射线衍射、N2吸附以及 NH3程序升温脱附表征。结果表明, TFMSA有效负载于 ATA载体表面及孔隙中,未发现明显的团聚,载体与活性组分之间存在较强的相互作用;另外, TFMSA/ATA上出现超强酸位点,说明 TFMSA/ATA具有超强酸性。以二(1-萘)甲烷加氢裂解作为探针反应考察了 TFMSA/ATA对 Car–Calk桥键断裂的催化活性。结果表明,二(1-萘)甲烷在 N2气氛和甲醇溶剂中选择性地加氢裂解,仅得到萘和1-甲基萘,未检测到加氢产物,且产物萘的收率明显高于1-甲基萘的收率,说明 TFMSA/ATA对二(1-萘)甲烷选择性加氢裂解和由此产生的1-甲基萘脱甲基反应有显著的促进作用。在相同反应条件下, TFMSA/ATA的活性明显高于 TFMSA/g-Al2O3和 TFMSA/ZSM-5,这是由于 TFMSA/ATA较大的比表面积以及载体 ATA与活性组分 TFMSA之间存在较强的相互作用有利于催化剂释放质子。由催化剂释放的质子优先进攻二(1-萘)甲烷中的取代位导致 Car–Calk键断裂是二(1-萘)甲烷加氢裂解的关键步骤。催化剂循环实验表明, TFMSA/ATA在循环使用4次后仍具有较高的催化活性,使用后催化剂酸性没有明显降低,说明 TFMSA/ATA具有良好的稳定性。     

A new practical strategy for the synthesis of long-chain phosphopeptide

A new practical strategy has been developed for the synthesis of long-chain phosphopeptide. Both the 2-chlorobenzyloxycarbonyl (CIZ) group for Lys and methyl (Me) for phosphoamino acids remained intact, while other commonly used side-chain protecting groups were cleaved quantitatively, during the reaction using a highly acidic trifluoromethanesulfonic acid (TFMSA)-based reagent system (High TFMSA: TFMSA-TFA-m-cresol=1:9:1, v/v). Selective deprotection of the CIZ and Me group-containing protected phosphopeptide resin with the High TFMSA gave a partially protected phosphopeptide fragment suitable for thioester-mediated fragment condensation. A deprotection protocol of the 9-fluorenylmethyloxycarbonyl (Fmoc) group, which evades significant side reaction toward the protected phosphoamino acid, was also developed. These two new findings enabled us to synthesize long-chain phosphopeptide via thioester-mediated fragment condensation.     

Evaluation of the trifluoromethanosulfonic acid/trifluoroacetic acid/thioanisole cleavage procedure for application in solid-phase peptide synthesis

As an extension of our investigation of peptidyl-resin linkage stability towards different cleavage procedures used in the solid-phase peptide synthesis (SPPS) technique, the present paper evaluated the trifluoromethanesulfonic acid (TFMSA)/trifluoroacetic acid (TFA)/thioanisole method, varying the type of resin (benzhydrylamine-resin, BHAR; methylbenzhydrylamine-resin, MBHAR and 4-(oxymethyl)-phenylacetamidomethyl-resin, PAMR) and peptide resin-bound residue (Gly and Phe). The vasoactive angiotensin II (AII, DRVYIHPF) and its [Gly8]-AII analogue linked to those resins used routinely in tert-butyloxycarbonyl (Boc)-SPPS chemistry were submitted comparatively to a time course study towards TFMSA/TFA cleavage. At 0 degrees C, [Gly8]-AII was completely removed from all resins in less than 6 h, but the hydrophobic Phe8 moiety-containing AII sequence was only partially cleaved (not more than 15%) from BHAR or MBHAR in this period. At 25 degrees C, [Gly8]-AII cleavage time decreased to less than 2 h irrespective of the solid support, and quantitative removal of AII from PAMR and MBHAR occurred in less than 3 h. However, about 10-15 h seemed to be necessary for cleavage of AII from BHAR, and in this extended cleavage reaction a significant increase in peptide degradation rate was observed. Regardless of the cleavage temperature used, the decreasing order of acid stability measured for resins was BHAR>MBHAR>PAMR. Collectively, these findings demonstrated the feasibility of applying TFMSA/TFA solution as a substitute for anhydrous HF at the cleavage step in Boc-SPPS methodology. Care should be taken however, as the cleavage efficacy depends on multiple factors including the resin, peptide sequence, the time and temperature of reaction.     

Experimental design for the study of two derivatization procedures for simultaneous GC analysis of acidic herbicides and water chlorination by-products

Two well known derivatization procedures, pentafluorobenzylation and BF(3)/methanol esterification, were compared for their applications to GC analysis of acidic water micropollutants (chloroacetic and phenoxyalkanoic acids). A two-level factorial design was used to determine the influence of different parameters and their interactions on each derivatization process. The studied parameters are the reaction time, the amount of reagent (PFBBr) or catalyst (BF(3)) and the temperature. Considering pentafluorobenzylation, the most influential factors are the concentration of PFBBr and the interaction ;temperature-time', which improve the derivatization efficiency. However, a PFBBr concentration of 250 mg l(-1) in the reaction medium cannot be exceeded because of the increase in interfering by-products in GC/ECD. Moreover, chloroacetic acid derivatives are co-eluted with these compounds. This disadvantage was not observed in the operating conditions of GC/MS. The improved pentafluorobenzylation procedure allows the direct determination of the derivatives in GC/ECD without any purification step. The average detection limits are 1.6 and 80 mug l(-1), respectively in GC/ECD and in GC/MS. The reproducibility is 13%. For the BF(3)/methanol esterification, the interactions ;BF(3) concentration-temperature' and ;BF(3) concentration-reaction time' are significant and have a negative effect on the derivatization yield. A linear model was therefore proposed and validated in the experimental area under study. All the compounds studied were detected in GC/MS, and the average detection limit is 2 mug l(-1). The reproducibility is around 7%. Therefore, after optimization, BF(3)/methanol esterification followed by GC/MS is as sensitive as pentafluorobenzylation used with GC/ECD, and more reproducible.     

Copper-Catalyzed Enantioselective Reductive Aldol Reaction of α,β-Unsaturated Carboxylic Acids to Alkyl Aryl Ketones: Silanes as Activator and Transient Protecting Group

The first enantioselective reductive aldol reaction of unprotected α,β-unsaturated carboxylic acids was developed by employing a copper/bisphosphine catalyst. The reaction features in situ protection and activation of an α,β-unsaturated carboxylic acid by a hydrosilane. The copper enolate formed in situ reacts with an alkyl aryl ketone to afford the β-hydroxy carboxylic acid with excellent enantioselectivity (up to 99 % ee). The corresponding gram-scale reaction with a low catalyst loading and the derivatization of the β-hydroxy carboxylic acids highlight the practicality of this transformation.     

Derivatization of secondary amines with 2-naphthalene-sulfonyl chloride for high-performance liquid chromatographic analysis of spectinomycin

A normal-phase high-performance liquid chromatographic (HPLC) method has been developed for the assay of spectinomycin hydrochloride and spectinomycin sulfate for detection at 254 nm. The method involves pre-column derivatization of secondary amines of spectinomycin with 2-naphthalenesulfonyl chloride (NSCl) using a catalyst. Lincomycin, 1-methylpyrrole, 2-acetyl-1-methylpyrrole, and 2-acetyl-pyrrole act as catalysts for sulfonylation of spectinomycin. Without a catalyst, the derivatization reaction forms a considerable amount of actinospectinoic acid, a degradation compound of spectinomycin, and peak area:weight ratio of the derivative is approximately 15% lower than those with the catalyst. Following derivatization the sample is extracted and chromatographed on a normal-phase silica column with detection at 254 nm. The method is applicable for the analysis of both the hydrochloride and sulfate salt forms of spectinomycin. All the known degradation compounds of spectinomycin such as actinamine, actinospectinoic acid and the biosynthesis intermediates, dihydrospectinomycin diastereoisomers, are completely separated with this method. Mass spectrometric data confirms that spectinomycin is derivatized with NSCl at the secondary amines located at positions 6 and 8 of the ring structure. The standard curves for the HPLC assay of spectinomycin hydrochloride and sulfate are linear with correlation coefficients of 0.9997 and 0.9999, respectively over the range of 0.05 mg/ml to 0.3 mg/ml. The relative standard deviations (R.S.D.) of the HPLC assay methods for spectinomycin hydrochloride and sulfate are 0.67% and 0.86%, respectively. Spectinomycin hydrochloride and sulfate bulk drugs were assayed by the HPLC method and compared to gas-liquid chromatography and microbiological assay results. The HPLC method was used to assay spectinomycin in a veterinary formulation, Linco-Spectin soluble powder. The sensitivity of the HPLC assay was determined to be approximately 4 ng sample load on the column, which suggests applicability in serum and residue level studies.     

Analysis of primary aromatic amines using precolumn derivatization by HPLC fluorescence detection and online MS identification

2-(2-phenyl-1H-phenanthro-[9,10-d]imidazole-1-yl)-acetic acid (PPIA) and 2-(9-acridone)-acetic acid (AAA), two novel precolumn fluorescent derivatization reagents, have been developed and compared for analysis of primary aromatic amines by high performance liquid chromatographic fluorescence detection coupled with online mass spectrometric identification. PPIA and AAA react rapidly and smoothly with the aromatic amines on the basis of a condensation reaction using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) as dehydrating catalyst to form stable derivatives with emission wavelengths at 380 and 440 nm, respectively. Taking six primary aromatic amines (aniline, 2-methylaniline, 2-methoxyaniline, 4-methylaniline, 4-chloroaniline, and 4-bromoaniline) as testing compounds, derivatization conditions such as coupling reagent, basic catalyst, reaction temperature and time, reaction solvent, and fluorescent labeling reagent concentration have also been investigated. With the better PPIA method, chromatographic separation of derivatized aromatic amines exhibited a good baseline resolution on an RP column. At the same time, by online mass spectrometric identification with atmospheric pressure chemical ionization (APCI) source in positive ion mode, the PPIA-labeled derivatives were characterized by easy-to-interpret mass spectra due to the prominent protonated molecular ion m/z [M + H](+) and specific fragment ions (MS/MS) m/z 335 and 295. The linear range is 24.41 fmol-200.0 pmol with correlation coefficients in the range of 0.9996-0.9999, and detection limits of PPIA-labeled aromatic amines are 0.12-0.21 nmol/L (S/N = 3). Method repeatability, precision, and recovery were evaluated and the results were excellent for the efficient HPLC analysis. The most important argument, however, was the high sensitivity and ease-of-handling of the PPIA method. Preliminary experiments with wastewater samples collected from the waterspout of a paper mill and its nearby soil where pollution with aromatic amines may be expected show that the method is highly validated with little interference in the chromatogram.     

A microfluidic device for the automated derivatization of free fatty acids to fatty acid methyl esters

Free fatty acid (FFA) compositions are examined in feedstock for biodiesel production, as source-specific markers in soil, and because of their role in cellular signaling. However, sample preparation of FFAs for gas chromatography-mass spectrometry (GC-MS) analysis can be time and labor intensive. Therefore, to increase sample preparation throughput, a glass microfluidic device was developed to automate derivatization of FFAs to fatty acid methyl esters (FAMEs). FFAs were delivered to one input of the device and methanolic-HCl was delivered to a second input. FAME products were produced as the reagents traversed a 29 μL reaction channel held at 55 °C. A Design of Experiment protocol was used to determine the combination of derivatization time (T(der)) and ratio of methanolic-HCl:FFA (R(der)) that maximized the derivatization efficiencies of tridecanoic acid and stearic acid to their methyl ester forms. The combination of T(der) = 0.8 min and R(der) = 4.9 that produced optimal derivatization conditions for both FFAs within a 5 min total sample preparation time was determined. This combination of T(der) and R(der) was used to derivatize 12 FFAs with a range of derivatization efficiencies from 18% to 93% with efficiencies of 61% for tridecanoic acid and 84% for stearic acid. As compared to a conventional macroscale derivatization of FFA to FAME, the microfluidic device decreased the volume of methanolic-HCl and FFA by 20- and 1300-fold, respectively. The developed microfluidic device can be used for automated preparation of FAMEs to analyze the FFA compositions of volume-limited samples.     

Stereochemical analysis of 3,4-methylenedioxymethamphetamine and its main metabolites by gas chromatography/mass spectrometry

3,4-Methylenedioxymethamphetamine (MDMA, ecstasy) is consumed as the racemate but some metabolic steps are enantioselective. In addition, chiral properties are preserved during MDMA biotransformation. A quantitative analytical methodology using gas chromatography/mass spectrometry (GC/MS) to determine enantioselective disposition in the body of MDMA and its main metabolites including 3,4-methylenedioxyamphetamine (MDA), 4-hydroxy-3-methoxymethamphetamine (HMMA), and 4-hydroxy-3-methoxyamphetamine (HMA) was developed. Plasma and urine samples were collected from a male volunteer. The analysis of MDMA, MDA, and 4-hydroxy-3-methoxy metabolites by GC/MS required a two-step derivatization procedure. The first step consisted of derivatization of the amine with enantiomerically pure Mosher's reagent ((R)-MTPCl). Triethylamine was used as a base to neutralize hydrochloric acid formed during the reaction allowing quantitative derivatization, which resulted in a substantial improvement in the sensitivity of the method compared with other previously described techniques. Further treatment with ammonium hydroxide was required since both amine and hydroxyl groups underwent derivatization in the reaction. Ammonium hydroxide breaks bonds formed with hydroxyl groups without affecting amine derivatives. The second derivatization step using hexamethyldisilazane was needed for metabolites containing phenol residues. This derivatization method permitted the stereochemically specific study of MDMA and its main monohydroxylated metabolites by GC/MS. A detailed study of the chemical reactions involved in the derivatization steps was indispensable to develop a straightforward, sensitive, and reproducible method for the analysis of the parent drug compound and its metabolites.     

乳酸丁酯的非均相催化合成

在Ga2 O3负载量为20％,500℃焙烧2h的条件下制备了固体酸催化剂Ga2 O3/SiO2,利用红外光谱分析对催化剂进行了表征.将其用于非均相催化合成乳酸丁酯的反应,考察了催化剂用量、n(正丁醇)∶n(乳酸)、环己烷用量、反应时间和催化剂重复使用性能等因素对酯化率的影响.结果表明,该催化剂催化合成乳酸丁酯的适宜反应...     

Determination of mandelic acid enantiomers in urine by derivatization in supercritical carbon dioxide prior to their determination by gas chromatography

The use of a supercritical carbon dioxide reaction medium for the determination of the (R)- and (S)-enantiomers of mandelic acid (MA) is proposed. The process involves a previous derivatization step under supercritical conditions by which the carboxyl group is esterified with methanol, then followed by acylation of the hydroxyl group in methyl MA with pentafluoropropionic anhydride in the absence of a catalyst. These derivatization steps cause no enantiomeric inversion. The derivatized enantiomers are extracted and quantified by gas chromatography. A BETA DEX 225 capillary column allows the separation of (R)-MA and (S)-MA as pentafluoropropionyl methyl esters with good resolution and precision. The overall method was used to determine both enantiomers in urine samples.     

A continuous two-phase reaction system coupled on-line with capillary chromatography for the determination of polar solutes in water

Gas chromatographic procedures are described for the determination of carboxylic acids and chlorinated anilines in water samples. Propionic acid and 2,6-difluorobenzoic acid in aqueous solution have been simultaneously alkylated and extracted by means of a continuous two-phase reaction system, and then quantitated by on-line coupled capillary gas chromatography; tetrahexyl-ammonium hydrogen sulfate was used as phase transfer catalyst and pentafluorobenzyl bromide as reagent. A factorial design approach was used to optimize on-line derivatization of aqueous propionic acid with regard to pH and concentration of phase transfer catalyst. Alkylation and extraction, under optimized conditions, followed by quantitation of the pentafluorobenzyl ester by flame ionization detection furnished a linear calibration for concentrations between 0.1 and 10 μg/ml. The relative standard deviation was 9–15 %. The continuous two-phase reaction system was also used to determine (chlorinated) anilines present in water at concentrations of 0.1–1 μg/ml; pentafluorobenzoyl chloride was used as reagent and analysis was performed by capillary gas chromatography with flame ionization or electron capture detection. The on-line acylation of p-chloroaniline was optimized with regard to pH, reagent concentration, and reaction time. The on-line reaction system worked satisfactorily for both applications, although excess reagent caused some problems with the chromatography.     

Improved sample preparation method for glycan analysis of glycoproteins by CE‐LIF and CE‐MS

CE is a high‐resolution separation technique broadly used in the biotechnology industry for carbohydrate analysis. The standard sample preparation protocol for CE analysis of glycans released from glycoproteins generally requires derivatization times of overnight at 37°C, using ≥100 fold excess of fluorophore reagent, 8‐aminopyrene‐1,3,6‐trisulfonic‐acid, if the sample is unknown, or it is a regulated biotherapeutic product, possibly containing terminal sialic acid(s). In this paper, we report on significant improvements for the standard CE sample preparation method of glycan analysis. By replacing the conventionally used acetic acid catalyst with citric acid, as low as 1:10 glycan to fluorophore molar ratio (versus the typical 1:≥100 ratio) maintained the >95% derivatization yield at 55°C with only 50 min reaction time. Terminal sialic acid loss was negligible at 55°C during the derivatization process, and indicating that the kinetics of labeling at 55°C was faster than the loss of sialic acid from the glycan. The reduced relative level of 8‐aminopyrene‐1,3,6‐trisulfonic‐acid simplified the removal of excess reagent, important in both CE‐LIF (electrokinetic injection bias) and CE‐MS (ion suppression). Coupling CE‐ ESI‐MS confirmed that the individual peaks separated by CE corresponded to single glycans and increased the confidence of structural assignment based on glucose unit values.     

GC–MS analysis of organic acids in rat urine: A protocol of direct ultrasound-assisted derivatization

The aim of the present study was to develop a novel ultrasound-assisted derivatization method for analysis of urine that can be used for preliminary screening and monitoring of metabolic disorders. Here we describe an ultrasound-assisted derivatization method followed by GC–MS analysis to quantify 26 organic acids in urine. The optimum levels of the variables affecting the yield of derivatization were investigated, including urease doses, derivatization reagents and derivatization conditions (duration time, reaction temperature and sonic power). The method exhibited the best results with 80 μl urease. The optimal reaction conditions were 100 μl BSTFA, 80% ultrasound power, 70°C and 40 min. This method showed satisfactory linearity, good reproducibility and an acceptable limit of detection and accuracy. Therefore, it could potentially be used to as a standard method to enable comparisons between laboratories. Finally, we applied our method to urine samples from pregnant rats administered 2 or 10 mg/kg folic acid supplementation.     

Application of single-drop microextraction combined with in-microvial derivatization for determination of acidic herbicides in water samples by gas chromatography-mass spectrometry

A single-drop microextraction (SDME) method and gas chromatography with mass spectrometry detection have been developed for the determination of acidic herbicides in water. The analytes were extracted from a 3 mL sample solution using 4 microL of hexyl acetate. After extraction, derivatization was carried out inside a glass microvial (1.1mm i.d.) using pentafluorobenzyl bromide (PFBBr). Triethylamine (TEA) was used as the reaction catalyst. The influence of derivatization reagent volume, catalyst amount, derivatization time and temperature on the yield of the in-microvial derivatization was investigated. Derivatization reaction was performed using 0.3 microL of PFBBr and 0.4 microL of TEA (10%, v/v in toluene) at 100 degrees C during 5 min. Also, the effects of different experimental SDME parameters such as selection of organic solvent, sample pH, addition of salt, extraction time and temperature of extraction were studied. Analytical parameters such as enrichment factor, precision, linearity and detection limits were also determined. The enrichment factors were between 83 and 157. The limits of detection (LOD) were in the range 1.2-7 ng/L (S/N=3). The relative standard deviations obtained were below 10.1% (n=5).     

Derivatization of organometal(loid) species by sodium borohydride problems and solutions.

Like other derivatization techniques, hydride generation is a chemical reaction that produces side-reactions leading to analytical problems. Demethylation of dimethylarsinic acid was observed to be dependent upon the pH level of the hydride generation reaction mixture. If the reaction mixture was acidic, then in addition to (CH3)2AsH, the monomethyl arsenic hydride [(CH3)AsH2] could be detected. Demethylation and also the formation of an unidentified arsenic species were noted when trimethyl arsonic oxide was used as derivatization educt. All of these effects depend on the pH level of the hydride generation mixture. We observed significant levels of organometal(loid) species of elements such as Ge, As, Sn, Sb, Hg and Bi in blank hydride generation mixtures. The organometal(loid) contamination was irreproducible even during I day using a single solution of sodium borohydride in deionized water. We concluded that the organometal(loid) contamination arises directly from the derivatization agent, sodium borohydride, itself. Use of helium purging and various adsorptive materials to decontaminate the sodium borohydride solution prior to analysis did not result in a significant decrease in organometal(loid) contamination levels. Use of a palladium-cluster stabilised with 1,10-phenanthrolin as alternative hydride generation derivatization agent was not found to be suitable, since reaction yields were poor and transmethylation reactions were noted.     

Fluorogenic derivatization of aryl halides based on the formation of biphenyl by Suzuki coupling reaction with phenylboronic acid

The fluorogenic derivatization method for aryl halide was developed for the first time. This method was based on the formation of fluorescent biphenyl structure by Suzuki coupling reaction between aryl halides and non-fluorescent phenylboronic acid (PBA). We measured the fluorescence spectra of the products obtained by the reaction of p-substituted aryl bromides (i.e., 4-bromobenzonitrile, 4-bromoanisole, 4-bromobenzoic acid ethyl ester and 4-bromotoluene) with PBA in the presence of palladium (II) acetate as a catalyst. The significant fluorescence at excitation maximum wavelength of 275–290 nm and emission maximum wavelength of 315–350 nm was detected in all the tested aryl bromides. This result demonstrated that non-fluorescent aryl bromides could be converted to the fluorescent biphenyl derivatives by the coupling reaction with non-fluorescent PBA. We tried to determine these aryl bromides by HPLC-fluorescence detection with pre-column derivatization. The aryl bromide derivatives were detected on the chromatogram within 30 min without any interfering peak derived from the reagent blank. The detection limits (S/N = 3) for aryl bromides were 13–157 fmol/injection.     

CATALYTIC ESTERIFICATION OF CARBOXYLIC ACIDS WITH ALCOHOLS BY SULFO—POLYVINYL CHLORIDE

Polyvinyl Chloride reacted with chlorosulfonic acid to from a polymer catalyst PVC-SO3H.This polymer catalyst was found to have high activity for resterification reaction between carboxylic acids and alcohols.This paper deals with the conditions in synthesis of n-butlyacetate catalyzed with PVC-SO3H.The PVC-SO3H was used as a catalyst for preparing 11 esters of acetic acid,propionic acid and butyric acid with the yields of 82-92%.     

Ultrasound-assisted extraction and silylation prior to gas chromatography-mass spectrometry for the characterization of the triterpenic fraction in olive leaves

One of the most important fractions of bioactive compounds isolated from plants is that formed by triterpenic compounds, which have proved to be anti-bacterial, antifungal, anti-inflammatory, cytotoxic and anti-tumour. A method for leaching and determination of the main triterpenic compounds (oleanolic acid, ursolic acid, uvaol, erythrodiol) in olive leaves is here presented. Quantitative leaching was obtained with ethanol as leachant and ultrasonic assistance for 20 min, a very short time as compared to conventional procedures by maceration, which usually requires at least 5 h. After isolation, an aliquot of the ethanolic leachate was silylated to derivatize the analytes prior to gas chromatography-mass spectrometry analysis. Silylation reaction was also assisted with ultrasound in order to accelerate the derivatization step, which only required 5 min--a dramatic shortening in comparison to conventional silylation of terpenic compounds with derivatization times ranging from 30 min to 3 h. The proposed method has demonstrated to be useful for isolation and characterization of the triterpenic fraction in plants; the capability of ultrasound to assist sample preparation (acceleration of leaching and derivatization) has also been proved.     

Characterization of proteinaceous glues in old paintings by separation of the o-phtalaldehyde derivatives of their amino acids by liquid chromatography with fluorescence detection

A HPLC-fluorescence method for characterization of proteinaceous glues from binding media used in pictorial works of art prior to conservation or restoration treatment is proposed. Fluorescence derivatization of amino acids released by acid hydrolysis of standard proteins is studied. The derivatization reagent was o-phtalaldehyde with 2-mercaptoethanol as catalyst. Mobile phase was a programmed gradient among two eluents (water buffered at pH 5.8 wit 5% THF, and methanol) and is able to satisfactorily resolve the amino acid derivatives in 45 min. Peak area ratios among amino acid derivatives and the leucine derivative are useful to characterize the proteins. The method shows good sensitivity and adequate linearity between 2.0 × 10⁻³ and 3.3 mmol/l of each amino acid, with a limit of detection of 6.0 × 10⁻⁴ mmol/l. The proposed method has been successfully applied to artistic samples from items of the cultural heritage of Valencia (Spain).