Effect of calcium substitution on structural,dielectric, ferroelectric,piezoelectric, and energy storage properties of BaTiO3

The effect of calcium substitution on the structural, dielectric, ferroelectric, piezoelectric, and energy storage properties of BaTiO₃ (BT) ceramics has been investigated. XRD confirmed the phase formation of Barium Calcium Titanate (BCT), and structural Rietveld refinement was used to estimate the lattice parameters. It is evident from the SEM data that the average grain size decreases as calcium is added. At Curie temperature (110 °C), BCT 0.10 ceramic has a good dielectric constant of 15834 and a very low dielectric loss of 0.009. According to the ferroelectric and piezoelectric investigations, BCT 0.10 exhibits maximum spontaneous polarization with the highest piezoelectric charge coefficient of 100 pC/N. BCT 0.10 has a maximum energy storage density of 96.8 mJ/cm³ and a good energy storage efficiency of 53.9%, which is around three times that of pure BaTiO₃. These results suggest that the BCT ceramic has good potential for energy storage applications.     

Synthesis and dielectric properties of Ba3NaRNb10O30 [R = La and Sm]

Polycrystalline samples of Ba₃NaRNb₁₀O₃₀ (R = La and Sm) have been prepared by high temperature solid-state reaction method. The X-ray powder diffraction technique has been used to test the formation of the compounds. Lattice parameters, space groups and basic structures of the compounds have been obtained from X-ray data. The dielectric constant has been measured as a function of frequency (100 Hz–10 kHz) and temperature (−180 to 200°C) to understand transition mechanism in these ferroelectric compounds.     

Effect of Ca substitution on structural,magnetic and dielectric properties of BiFeO3

Bi_1-xCa_xFeO₃ (x = 0.40, 0.50) compounds are synthesized by conventional solid-state reaction method. The effect of Ca²⁺ substitution is investigated on structural, dielectric and magnetic properties. Rietveld refinement confirms that crystal structures of both the samples are tetragonal with P4mm symmetry. The highest values of remnant magnetization (M_r ) and coercive field (H_c ) are 0.002 emu/g and 0.23 kOe, respectively, for x = 0.50. The electric modulus formalism is used to distinguish and separate out the relaxation process which is dominated by the transport phenomenon. The relaxation process has activation energy ～0.32 eV which is found to be related to both the hopping mechanisms, i.e. electronic and oxide ions.     

Effect of sintering temperature on the structural, dielectric and ferroelectric properties of tungsten substituted SBT ceramics

Structural, dielectric and ferroelectric properties of tungsten (W) substituted SrBi₂(Ta_1−xW_x)₂O₉ (SBTW) [x=0.0, 0.025, 0.05, 0.075, 0.1 and 0.2] have been studied as a function of sintering temperature (1100-1250 °C). X-ray diffraction patterns confirm the single-phase layered perovskite structure formation up to x=0.05 at all sintering temperatures. The present study reveals an optimum sintering temperature of 1200 °C for the best properties of SBTW samples. Maximum T_c of ∼390 °C is observed for x=0.20 sample sintered at 1200 °C. Peak-dielectric constant (ε_r) increases from ∼270 to ∼700 on increasing x from 0.0 to 0.20 at 1200 °C sintering temperature. DC conductivity of the SBTW samples is nearly two to three orders lower than that of the pristine sample. Remnant polarization (P_r) increases with the W content up to x≤0.075. A maximum 2P_r (∼25 μC/cm²) is obtained with x=0.075 sample sintered at 1200 °C. The observed behavior is explained in terms of improved microstructural features, contribution from the oxygen and cationic vacancies in SBTW. Such tungsten substituted samples sintered at 1200 °C exhibiting enhanced dielectric and ferroelectric properties should be useful for memory applications.     

Manipulation of dielectric,ferroelectric and magnetic anomalies in multiferroic,morphotropic phase boundary quenched BiFeO3-0.35PbTiO3 solid solutions

The effect of thermal quenching on physical properties of morphotropic phase boundary BiFeO₃-0.35PbTiO₃ composition, composed of Pnma, R3c and P4mm phases, has been investigated in detail. We detected and quantified role of quenching through investigation of magnetic, dielectric and ferroelectric anomalies. Quenching significantly i) enhances the tetragonal phase percentage (hence affects domain structure), ii) reduces domain wall clamping with a large increase in electrical polarization, iii) increases magnetization at the structural phase transition temperature (tunable magneto-electric coupling), iv) magnifies intrinsic property i.e. intra grain relaxation dynamics (which are otherwise suppressed due to the pinning of the defect dipoles), etc. All these findings clearly verify the role of quenching which noticeably enhances multiferroic properties at the well-known morphotropic phase boundary.     

Linear and nonlinear dielectric properties of nanocomposites based on the organic ferroelectric of diisopropylammonium bromide

ABSTRACT

The present work aims at investigating linear and nonlinear dielectric properties of nanocomposites based on diisopropylammonium bromide (C₆H₁₆NBr, DIPAB) embedded into Al₂O₃ films having honeycomb structure with pores of 100?nm in diameter, and into opal matrices with three-dimensional structure containing pores of 100 and 60?nm. The obtained results indicated the shift of Curie point toward lower temperatures for DIPAB in porous aluminum oxide and the appearance of two phase transitions, detected upon heating and cooling for DIPAB in opal matrices. In addition, a ferroelectric phase was found to form between these two phase transitions without significant change of Curie temperature.     

Preparation, structural analysis and dielectric properties of Bi x La1−x FeO3 perovskite

Rare earth element substituted bismuth ferrites (BiFeO₃) are of enormous importance as magnetoelectric materials. The polycrystalline samples of Bi _x La_1−x FeO₃ (x=0, 0.2, 0.4, 0.6, 0.8) were prepared by solid-state reaction using standard ceramic method. The single-phase formation of these compounds was confirmed by X-ray diffraction (XRD) studies. The samples with x=0, 0.2, 0.4, 0.6 are found to be orthorhombic while the sample with x=0.8 is triclinic. The dielectric constant (ε′) and dissipation factor (tan δ) were measured in the frequency range 100 Hz to 1 MHz at room temperature and as a function of temperature at certain fixed frequencies (1 kHz, 10 kHz, 100 kHz, 1 MHz). All the samples showed dielectric dispersion. The dielectric constant with temperature shows a broad peak; the peak temperature shifts with frequency which reflects the relaxor-type behavior. The peak above 600 K in the measured temperature range corresponds to antiferromagnetic ordering temperature (Néel temperature). The broadness of the peak changes with composition. The ac conductivity as well as ε′ are found to be maximum for the sample x=0.2 at room temperature.     

Effect of the chiral chain length on structural and phase properties of ferroelectric liquid crystals

Studies of structural and phase properties obtained on several ferroelectric liquid crystalline materials with 2-alkoxypropionate group used as a chiral centre and without any lateral substitution are presented. In dependence on the chiral chain length these compounds exhibit the cholesteric N* phase, the ferroelectric smectic C* and a low-temperature SmX phase. Values of the spontaneous polarization and spontaneous tilt angle have been determined within the whole range of the SmC* phase. A low-temperature SmX phase has been identified as the orthogonal hexatic SmB* phase. The molecular parameters, namely the layer spacing in the SmC* and SmB* phases and the average intermolecular distances (D) between neighbouring parallel molecules in all investigated phases have been determined using the results of the X-ray diffraction obtained on non-oriented samples. The effect of the chiral chain length on mesomorphic, structural and physical properties of the studied ferroelectric liquid crystalline materials is discussed.     

Effect of barium titanate nanoparticles of different particle sizes on electro-optic and dielectric properties of ferroelectric liquid crystal

A comparative study of two different particle sizes of ferroelectric barium titanate (BaTiO₃) nanoparticles as a dopant on the molecular structure, spontaneous polarization and dielectric behavior of a pure ferroelectric liquid crystal 6F₆T have been studied. It has been found that there is a remarkable decrease in isotropic temperature of both doped samples as compared to the pure 6F₆T sample. The spontaneous polarization also decreases for both the doped samples and the reduction is more pronounced in case of the dopant with large particle size. The dielectric spectroscopy confirms the presence of soft mode as well as Goldstone mode and also shows the decrease in the value of dielectric permittivity ?' as a function of frequency for both doped samples. The improvised properties of liquid crystal host doped with BaTiO₃ nanoparticles mainly depend upon the synthesis method of nanoparticles and also upon the particle size of dopant.     

Effect of uniaxial stress on the dielectric properties of BaTiO3+0.1wt.%Eu2O3 ceramics

ABSTRACT

BaTiO₃+0.1wt.%Eu₂O₃ ceramics were prepared by a solid-state reaction method. The dielectric behavior of these ceramics as a function of uniaxial pressure has been systematically studied. The external stress showed obvious effects on these properties. An increase of the Curie point (T_c) and decrease of the Curie–Weiss temperature (T₀) was observed with increasing pressure, resulting in an increase in the first-order nature of the phase transformation (T_c–T₀ increases). Broadening and flattening of the permittivity versus temperature curves near their maximum was found. The pressure behavior of thermal hysteresis and the ??/?T vs. T plot suggests that the phase transition changes to second-order type with increasing pressure. Furthermore, the Curie–Weiss constant obtained from a modified Curie–Weiss law strongly decreases with increasing pressure, suggesting that the mechanism of phase transition is going to order–disorder type.     

Structural,spectroscopic and dielectric properties of KVO3

Polycrystalline samples of KVO₃, a member of the pyroxene structural family have been synthesised with high-temperature solid-state reaction technique. Preliminary structural and spectroscopic and detailed dielectric properties have been studied in different conditions. No dielectric anomaly or hysteresis loop has been observed in a wide temperature range (30°C to 450°C). Basic structural and spectroscopic (IR and Raman) studies suggest that at room temperature, KVO₃ is centrosymmetric as reported earlier. This and other observations do not support the recent report of ferroelectric phase transition in the compound.     

Effect of Y3+ substitution on the structural,dielectric, and electrical properties of nanosized ZnAl 2 O 4 spinel

In the present work, we have studied the structural, dielectric, and electrical properties of a series of nanosized $\mathrm{ZnAl}_{2-2x}\mathrm{Y}_{2x}\mathrm{O}_{4}$ ( $x = 0.00$ , 0.01, 0.02, 0.03, 0.04, 0.05, 0.07, and 0.10) system prepared by chemical coprecipitation method. Powder X-ray diffraction (XRD) was carried out to study the influence of $\mathrm{Y}^{3+}$ substitution on the crystal structure of these samples. High Resolution Transmission Electron Microscopy (HRTEM) images reveal the nanocrystalline nature of the samples. The Fourier Transform Infrared (FTIR) spectra confirmed the preference of $\mathrm{Y}^{3+}$ ions at the octahedral B site. The variation of dielectric constant and loss tangent (1 kHz to 1 MHz) at room temperature for all the samples show the normal behavior of spinel compounds. AC conductivity study reveals that the conduction is due to small polaron hopping. The electrical modulus analysis shows that nanocrystalline $\mathrm{ZnAl}_{2-2x}\mathrm{Y}_{2x}\mathrm{O}_{4}$ system exhibits non-Debye-type relaxation. The DC electrical resistivity measured in the temperature range 303–373 K was found to increase with temperature and yttrium content.     

(PbBa)(Zr,Sn,Ti)O_3反铁电/弛豫型铁电相界陶瓷的相变与介电、热释电性质

通过对(Pb087Ba01La002)(Zr06TixSn04-x)O3(004≤x≤020)固溶体的介电和偏压热释电性质的研究发现,当Ti含量004≤x≤007时,材料是反铁电四方相,而当009≤x≤020时,材料向弛豫型铁电体转化.在温度Ti含量相图中,x=009附近形成了反铁电铁电顺电三相共存点(Ttr).该点的相变温度最底;对于004≤x≤007的反铁电四方相,低温下呈现介电弛豫特征,并可被外电场诱导为亚稳铁电态,温度升高时,亚稳铁电→反铁电相变,反铁电→顺电相变引起两个热释电流峰,偏置电场下峰位和峰强均发生移动,在温度电场相图中也形成了铁电反铁电顺电三相点.从复杂化合物纳米相分离的观点和晶格动力学出发,讨论了相变与电学性能随Ti含量(x)和外电场(E)变化的物理机理. 关键词： 反铁电/弛豫型铁电相界 介电性能 偏压热释电性质 铁电-反铁电-顺电三相点     

Effect of La3+ and Pr3+ co-doping on structural,thermal and electrical properties of ceria ceramics as solid electrolytes for IT-SOFC applications

In the present investigation, the effect of La³⁺ and Pr³⁺ co-doping on structural, thermal and electrical properties of ceria ceramics useful as solid electrolytes in intermediate temperature solid oxide fuel cells (IT-SOFCs) has been studied. The co-doped ceria Ce_0.8Pr_0.2–xLa_xO_2-δ samples have been prepared successfully via sol-gel auto-combustion synthesis. The high dense ceramic samples have been achieved by carry out an optimized conventional sintering at 1300 °C for 4 h. The powder X-ray diffraction analysis of all the co-doped ceria ceramics revealed the single phase with cubic-fluorite structure formation. Crystallographic information has been carried out from the powder X-ray diffraction and Rietveld refinement analysis. The scanning electron microscope and energy dispersive spectroscopy analysis revealed the smaller grain size with high density in microstructure and stoichiometric elemental confirmations. Raman spectra of prepared ceramics revealed the information of phase and oxygen vacancy formation in the entire compositions. The dilatometric studies of prepared co-doped ceria ceramics revealed the moderate coefficients of thermal expansion. The electrical parameters such as total conductivities and activation energies have been studied with the help of impedance spectroscopy. Among all these co-doped ceria ceramic samples, Ce_0.80Pr_0.10La_0.10O_2−δ found to exhibit the highest value of total ionic conductivity with minimum activation energy and this makes it could be a promising electrolyte material for IT-SOFC applications.     

Effect of Sb doping on phase transition and relaxor behaviour of (Pb0.75Ba0.25)(Zr0.70Ti0.30)O3 ceramics

The effect of antimony dopant on phase transition, dielectric response and relaxor behaviour of (Pb_0.75Ba_0.25)(Zr_0.70Ti_0.30)O₃ ceramics was studied. Ceramic samples, with various Sb concentration from the range 1 to 4 at.%, were prepared by a conventional mixed oxide method. The crystal structure of the investigated ceramics was determined by an X-ray diffraction at room temperature that allowed to determine the unit cell parameters. Dielectric relaxation typical for ferroelectric relaxors was observed in the vicinity of diffuse ferroelectric–paraelectric phase transition. All parameters describing the relaxor behaviour determined from the Vogel–Fulcher relationship depend on the concentration of Sb dopant. The strong influence of antimony on grain structure and on remanent polarisation was confirmed as well.     

Influence of sintering conditions on structural,thermal, electric and ferroelectric properties of Na0.5Bi0.5TiO3 ceramics

Na_0.5Bi_0.5TiO₃ ceramics were prepared by a conventional solid-state reaction method and by a hot-pressing route. The influence of sintering conditions on structural, thermal, dielectric and ferroelectric properties of these ceramics was investigated. All obtained samples exhibited a single perovskite phase. It was shown that the sintering conditions significantly influence the properties under investigation. This includes changes in the value of the electric permittivity ? and dielectric loss tanδ, a shift of T_m and T_d and change of the ferroelectric properties. These effects are mainly related to volatility of the Na and Bi components during the sintering process along with formation of their compensating charge defects, which leads to local structure change.     

Effect of Gd3+ doping on structural,optical and frequency-dependent dielectric response properties of pseudo-cubic BaTiO3 nanostructures

We report on the structural, optical and dielectric characterization of solid state derived, pseudo-cubic nanoscale barium titanates (BTs) with gadolinium (Gd³⁺) as substitutional dopant. Referring to X-ray diffractograms, apart from the BT peaks related to perovskite structure, the non-existence of any additional peaks due to byproducts has revealed that Gd³⁺ has undergone substitutional doping into the BT host lattice. The well-separated BT nanoparticles of typical size ～10–15 nm were observed through electron microscopy studies. Following a direct, allowed type carrier transition (n=1/2), a reduction in the optical band gap value (from 3.28 to 3.255 eV) was observed when the Gd-doping level was varied within 0–7 %. Conversely, the Urbach energy followed an increasing trend, from a value of 0.741 to 1.879 eV. Furthermore, the dielectric constant showed a decreasing tendency with doping content and with increasing frequency. However, in the low-frequency region, the loss tangent (tanδ), which is the combined result of orientational polarization and electrical conduction, was found to be quite high in the doped samples as compared to their un-doped counterpart. The frequency-dependent electrical data were also analyzed in the framework of conductivity and impedance formalisms. In particular, the ac conductivity which varies as ～ω ^s approaches ideal Debye behavior (s→1) for a low Gd level and a higher doping concentration did not show improved dielectric feature of the host. The incorporation of rare-earth (Gd³⁺) ions into the BT host system could greatly manifest dielectric relaxation and carrier conduction mechanisms, in a given frequency range, and thus can find immense scope in miniaturized nanoelectronic elements including ceramic capacitors and transducers.     

Experimental investigation on the structural,dielectric, ferroelectric and piezoelectric properties of La doped ZnO nanoparticles and their application in dye-sensitized solar cells

Pure and lanthanum (La) doped ZnO nanorods were synthesized via co-precipitation method. The structure and morphology of as grown ZnO and La-ZnO nanoparticles were studied using transmission electron microscopy (TEM) and powder X-ray diffraction (XRD) methods. The values of remnant polarization and coercive field were found to be 0.027 μC/cm² and 1.33 kV/cm, respectively, for as grown La-ZnO nanostructures. High Curie temperature (276 °C) for doped ZnO was observed in dielectric study. Piezoelectric coefficient at room temperature was found to be 101.30 pm/V. I-V characteristics were studied for both pure and doped ZnO nanoparticles. Photo-anodes of dye-sensitized solar cells (DSSCs) were made using ZnO and La-ZnO nanorods. The conversion efficiency and short circuit current density of La-ZnO nanorods based DSSC were 0.36% and 1.31 mA/cm², respectively, which were found to be largely enhanced when compared with that of pure ZnO based DSSC (0.20% and 0.94 mA/cm²).     

Effect of Al3+ substitution on structural,cation distribution,electrical and magnetic properties of CoFe2O4

We present the structural, cation distribution, electrical and magnetic studies of CoAl_xFe_2−xO₄ (x = 0.0, 0.2, 0.4, 0.6, 0.8) ferrites. The Rietveld-fitted X-ray diffraction (XRD) patterns confirm the formation of single-phase cubic spinel structures with $Fd\overline{3}m$ space group for all the samples. A comprehensive analysis of XRD-based cation distribution has been performed to see the effect of Al³⁺ ions substitution on various structural parameters such as site ionic radii, edge length, bond length and interionic distances. The dielectric constant and direct current (DC) conductivity decreases with increasing Al³⁺ substitution up to x = 0.4. However, with further increase in Al³⁺ substitution, both the dielectric constant and the DC conductivity increase. The presentation of dielectric data in the complex electric modulus form reveals the presence of a non-Debye-type relaxation behaviour in the considered ferrites. The power law behaviour of alternating current (AC) conductivity indicates a strong correlation among electrons in these systems. The isothermal magnetisation versus applied field curves with high-field slope and significant coercivity suggest that the studied materials are highly anisotropic with canted spin structures. The samples exhibit ferrimagnetic behaviour at 300 K and the magnetisation decreases with increasing Al³⁺ concentration. The as-prepared samples are promising candidates for various industrial applications.