Unified analysis of thermodynamic and rheological properties of high polymer solutions. II. Ternary systems

We extend to ternary solutions our previous study of conformational, thermodynamic, and rheological properties of semidilute polymer solutions in good solvent. Osmotic pressure and viscosity measurements were performed in several mixtures of two compatible polymers in a common solvent. Renormalization group results were used to analyze the data, using de Gennes's blobs model to connect dynamic and conformational properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1071–1079, 2002     

pH‐responsive ampholytic terpolymers of acrylamide,sodium 3‐acrylamido‐3‐methylbutanoate,and (3‐acrylamidopropyl)trimethylammonium chloride. II. Solution properties

The solution properties of low‐charge‐density ampholytic terpolymers of acrylamide, sodium 3‐acrylamido‐3‐methylbutanoate, and (3‐acrylamidopropyl)trimethylammonium chloride were studied as functions of the solution pH, ionic strength, and polymer concentration. Terpolymers with low charge densities, large charge asymmetries, or both exhibited excellent solubility in deionized (DI) water, and higher charge density terpolymers were readily dispersible in DI water; however, the higher charge density terpolymer solutions separated into polymer‐rich and polymer‐poor phases upon standing over time. Charge‐balanced terpolymers exhibited antipolyelectrolyte behavior at pH values greater than or equal to the ambient pH (6.5 ± 0.2); the same terpolymers behaved increasingly as cationic polyelectrolytes with decreasing solution pH because of the protonation of the 3‐acrylamido‐3‐methylbutanoate (AMB) repeat units. Unbalanced terpolymers generally exhibited polyelectrolyte behavior, although the effects of intramolecular electrostatic attractions (i.e., polyampholyte effects) on the hydrodynamic volume of the unbalanced terpolymer coils were evident at certain values of the solution pH and salt concentration. The dilute‐solution behavior of the terpolymers correlated well with the behavior predicted by several polyampholyte solution theories. In the semidilute regime, solution viscosities increased with increasing terpolymer charge density, and this indicated a significant enhancement of the solution viscosity by intermolecular electrostatic associations. Upon the addition of NaCl, semidilute‐solution viscosities tended to decrease because of the disruption of the intermolecular electrostatic associations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3252–3270, 2004     

Capillary breakup extensional rheometry of sodium carboxymethylcellulose solutions in water and propylene glycol/water mixtures

This article presents the results of capillary break‐up extensional rheometer experiments conducted for semidilute solutions of carboxymethylcellulose sodium salt (Na‐CMC) with degrees of substitution (DS) ranging from 0.62 to 1.04 in distilled water and propylene glycol (PG)/water mixtures. The partial aggregation of Na‐CMC chains with DS < 1 observed in aqueous solutions triggers an increase in apparent extensional viscosity and extension of break‐up time. The rheological properties of Na‐CMC solutions in propylene glycol/water mixture are determined by the solubility of the polymer and the physical crosslinking of chains. The disappearance of the elasto‐capillary regime during the filament thinning of Na‐CMC solutions with DS < 1 in propylene glycol/water mixture was linked to the physical crosslinking of polymer chains. The shape of the extensional viscosity curve for Na‐CMC solutions with DS = 1.04 in PG/water mixture was characteristic for semidilute polymer solutions with a low number of entanglements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1537–1547     

Small‐angle X‐ray scattering from poly(methylmethacrylate) in aqueous solutions of t‐butyl alcohol

Segment‐segment interaction of poly(methylmethacrylate) in t‐butyl alcohol‐water mixtures in poor solvent regime was studied. From the small‐angle X‐ray scattering measurements of semidilute solution range, the binary and ternary cluster integrals of polymer segments were determined from concentration dependence of the correlation length at various temperatures just above the upper critical solution temperature. We have calculated the contributions of the segment–segment interaction to the entropy and enthalpy from the measured temperature dependence of these interaction parameters and found that both quantities are negative and decrease with decreasing t‐butyl alcohol content. FT‐IR absorption peak of carbonyl group of poly(methylmethacrylate) shifts to the lower frequency with increasing water content. The implications of these findings are discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2195–2199, 1999     

Phase separation kinetics in unentangled polymer solutions under high‐rate extension

Phase separation processes following high‐rate extension in unentangled polymer solutions are studied theoretically. The flow‐induced demixing is associated with the coil–stretch transition predicted in high‐molecular‐weight polymer solutions at high‐enough Weissenberg numbers. The developed mean‐field theory is valid in the dilute/semidilute solution regime, where the stretched coils overlap strongly. We elucidate and discuss the main kinetic stages of the polymer/solvent separation process including (i) growth of concentration fluctuations and formation of oriented protofibrils by anisotropic spinodal decomposition; (ii) development of well‐defined highly oriented and stiff fibrils forming an anisotropic network (cross‐linked fiber); (iii) microphase separation and lateral collapse of the network yielding dense oriented fiber. These novel predictions are in qualitative agreement with the experimental data. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 623–637     

Self‐diffusion of styrene, 2,2′‐azobisisobutyronitrile,and polystyrene in bulk polymerization by pulsed‐gradient spin‐echo nuclear magnetic resonance spectroscopy

The self‐diffusion of styrene, polystyrene, and 2,2′‐azobisisobutyronitrile has been determined in the bulk polymerization of styrene with pulsed‐gradient spin‐echo nuclear magnetic resonance at 25 °C. Data on small molecules are discussed with respect to recent diffusion models. They can fit self‐diffusion coefficient data of small molecules in dilute or semidilute polymer solutions; in concentrated solutions, however, there is a breakdown. A semiempirical model based on scaling laws is used to describe the self‐diffusion of styrene and 2,2′‐azobisisobutyronitrile over the whole range of concentrations studied. The dependence of the polystyrene self‐diffusion coefficient on the polymer concentration is described with a stretched exponential function, D = D₀ exp(?αc^ν), where α depends on the molecular weight of the polymer and ν depends on the kind of solvent. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1605–1614, 2003     

Associated inter‐ and intrachain conformational transitions in polystyrene solutions

Understanding the conformational changes of polymeric chains in solutions is an essential and integral part of polymer physics. By increasing the concentration of polymer solutions from dilute to semidilute regime, the critical chain overlapping has been reported at the concentration termed as C*. In this study, the associated inter‐ and intrachain conformational transitions in polystyrene (PS) solutions are reported. By comparing the spectroscopic intensity ratio versus concentration for an intrachain PS system, a break point was observed in good solvent which coincided with the theoretically predicted C*. Moreover, the intrachain conformation showed no obvious change below C*, while significant collapse started to occur above C*. This result reveals a new insight in polymer physics, since traditionally the size of polymer chains is considered to decrease weakly regarding the concentration change in the semidilute regime. It is important to find such an abrupt intrachain conformational transition between the dilute and semidilute solutions and provide the first experimental observation that inter‐ and intrachain conformational transitions are correlated to one the other. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1373–1379     

Insight into chain dimensions in PEO/water solutions

Small‐Angle Neutron Scattering has been performed from poly(ethylene oxide) in deuterated water at temperature ranging from 10 to 80 °C. A simple fitting model was used to obtain a correlation length and a Porod exponent. The correlation length L characterizes the average distance between entanglements in the semidilute region and is proportional to the individual coil sizes in the dilute region. L was found to increase with temperature in the semidilute region but it decreases with temperature in the dilute region. This decrease is the precursor to the single‐chain collapse which applies to very dilute polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2196–2200, 2007     

Noncontinuum effects on the mobility of nanoparticles in unentangled polymer solutions

The results for the diffusivity of nanoparticles in unentangled semidilute polymer solutions obtained using coarse‐grained simulations are presented. The results indicate that for particle sizes smaller than the polymer radius of gyration, the nanoparticle diffusivities deviate from Stokes–Einstein predictions and depend explicitly on the polymer radius of gyration and the polymer solution correlation lengths. Scaling ideas proposed are invoked for rationalizing such noncontinuum effects and demonstrate that the simulation results could be collapsed onto a single universal function of the depletion thickness, the polymer radius of gyration, and the particle radius. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2145–2150.     

Kinetics of thermally induced phase separation in ternary polymer solutions. I. Modeling of phase separation dynamics

Simulations based on Cahn–Hilliard spinodal decomposition theory for phase separation in thermally quenched polymer/solvent/nonsolvent systems are presented. Two common membrane‐forming systems are studied, cellulose acetate [CA]/acetone/water, and poly(ethersulfone) [PES]/dimethylsulfoxide [DMSO]/water. The effects of initial polymer and nonsolvent composition on the structure‐formation dynamics are elucidated, and growth rates at specific points within the ternary phase diagram are quantified. Predicted pore growth rate curves exhibit a relative maximum with nonsolvent composition. For shallow quenches (lower nonsolvent content) near a phase boundary, the pore growth rate increases with increasing quench depth, whereas for deep quenches, where the composition of the polymer‐rich phase approaches that of a glass, the pore growth rate decreases with increasing quench depth. With increasing initial polymer concentration, the overall rate of structure growth is lowered and the growth rate maximum shifts to higher nonsolvent compositions. This behavior appears to be a universal phenomenon in quenched polymer solutions which can undergo a glass transition, and is a result of an interplay between thermodynamic and kinetic driving forces. These results suggest a mechanism for the locking‐in of the two‐phase structure that occurs during nonsolvent‐induced phase inversion. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1449–1460, 1999     

Near‐infrared spectroscopy for the quantitative determination of mass transfer and water absorption kinetics by a polymer solution

This article reports a new method to quantify the water absorption kinetics and the mass transfer in a polymer solution by using near‐infrared (NIR) spectroscopy and partial least‐squares (PLS) models, while it is exposed to a humid atmosphere. Polymer solutions used in this study were made with highly polar solvents exhibiting both a high affinity for water and a low volatility such as dimethylformamide, dimethylacetamide, and N‐methylpyrrolidone. Poly(ethersulfone) and poly(etherimide) were chosen as polymer models as the method could provide useful information for coating process and membrane fabrication monitoring. Whereas gravimetric kinetics yield data on the overall mass transfer, including both water absorption and solvent evaporation, in situ analyses using NIR can quantify separately the solvent and nonsolvent concentration change in the polymer solution. Quantitative models were developed using PLS regression to predict the local water, polymer, and solvent weight fractions in the polymer solution. The method was proved to be suitable for the different studied systems and allowed to infer mass transfers until the onset of the phase separation process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1960–1969, 2010     

Ionic organic/inorganic materials. II. New linear and crosslinked poly(ethylene oxide)‐based ionomers by quaternization with chloroalkyl‐functionalized siloxanes

Siloxane‐modified cationic polyelectrolytes were synthesized through the quaternization reaction of a poly(ethylene glycol)‐based polymer containing tertiary amine groups in the chain with chloroalkyl‐functionalized siloxanes. Linear or crosslinked structures were obtained, depending on the functionality of the siloxane: a chloroalkyl‐monofunctionalized or ‐polyfunctionalized siloxane was used. The reaction occurred in solution with n‐propanol as a solvent and NaI as a catalyst. All products were characterized with elemental analysis and IR and ¹H NMR spectrometry. Viscometric measurements of the linear polymer in dilute aqueous solutions revealed typical polyelectrolyte behavior. The swelling capacities in various solvents of the crosslinked structures were determined. The thermal stability of the crosslinked cationic structures obtained with a polyfunctional siloxane as a quaternization agent was much higher than that of the parent polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3720–3728, 2004     

Retracted: Effects of nanoparticles to the dynamical behavior of polymer chains in semidilute polymer solution: A dynamic light scattering study

The following article from the Journal of Polymer Science Part B: Polymer Physics: “Effects of nanoparticles to the dynamical behavior of polymer chains in semidilute polymer solution: A dynamic light scattering study,” by Mojammel H. Mondal, published online on 18 January 2011 in Wiley Online Library (onlinelibrary.wiley.com), has been retracted by agreement between the author, the journal Managing Editor, Dr. Victoria Cleave, and Wiley‐Blackwell. The retraction has been made as the research article was submitted without the author's PhD supervisor and principal investigator's knowledge or consent. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Collective dynamics of semidilute polyelectrolyte solutions with salt

We present a theory of coupled fluctuations of polymer segments, counterions, and coions in semidilute polyelectrolyte solutions containing added salt. The coupling among the three species results in three relaxation modes, instead of the previous common usage of only two relaxation modes by absorbing the role of salt as an effective solvent. Among the three modes, one is the nondiffusive plasmon mode and the other two are diffusive modes. These three modes are unrelated to any other slow mode that may arise from effects such as aggregation. Explicit expressions are derived for the decay rates in terms of concentrations of polyelectrolyte and salt, and the degree of ionization of the polymer. The specific values for the decay rates of the three modes are shown as an illustration for a chosen set of values of experimental variables. In the absence of added salt, the present theory reduces to the previous theory of fast diffusion in salt‐free polyelectrolyte solutions and to the Nernst–Hartley theory for simple electrolytes. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1263–1269     

Enthalpic effect of polyacrylonitrile on the concentrated solutions in dimethyl sulfoxide: Strong thixotropic behavior and formation of bound solvents

The effect of dipole–dipole interaction by nitrile groups of PAN on the bound state of solvent molecules and the concentrated solution properties in DMSO was investigated. Variation of a solution viscosity exhibited three overlap concentrations, C1*, C2*, and C3*, at 2.7, 8.6, and 16.3 wt%, respectively, representing the transition of concentration regions in the order of dilute, unentangled‐semi dilute, entangled‐semi dilute, and concentrated regions. The two‐dimensional mapping of FT‐IR analysis and dielectric measurement confirmed that the intermolecular interaction of PAN was suddenly enhanced at the C*s, inducing polarization to DMSO. In the ice‐melting process of PAN solutions, two different melting peaks (T_m2 and T_m3) of DMSO newly appeared at each C2* and C3*, suggesting the different types of bound solvents. In the concentrated solutions, the saturated dielectric constant and the strongly delayed evaporation of the solvent even at the boiling point of DMSO along with strong thixotropic behavior were indicative of the stronger confinement state of bound DMSO than in the semidilute solutions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1080–1089     

Transition from Incomplete to Complete Wetting of Solid Surface in Polymer–Solvent System: 2. The Regime of Strong Adsorption

The transition from incomplete to complete wetting of the solid surface by a semidilute polymer solution coexisting at equilibrium with the very-dilute polymer solution was studied using the Canh–de Gennes theory under the conditions corresponding to the tricritical state of semidilute solution and strong adsorption of the chain units on a substrate. It was established that the wetting transition can occur as the first- or second-order phase transition or as the transition of tricritical wetting depending on the repulsion energy of segments that are on the substrate surface. Near the temperatures of these transitions, the character of the variations in the differences of surface concentrations that are established at the boundaries of the substrate with semidilute and dilute polymer solutions, as well as in the differences of interfacial tensions and the cosine of contact angle were determined. It was shown that the temperature of each of these phase transitions varies in proportion to the surface potential of the substrate and does not depend on the polymer molecular mass. The observed behavior differs essentially from that established near the critical point of a polymer–solvent system.     

The effect of salts on the conformation and microstructure of poly(N‐isopropylacrylamide) (PNIPA) in aqueous solution

We present an experimental investigation of the conformation and microstructure of Poly(N‐isopropylacrylamide) (PNIPA) in aqueous solution in the presence of salts. As a model, a strong salting–out salt (Na₂SO₄) and a strong salting–in salt (NaSCN) were chosen. Light scattering measurements show that Na₂SO₄ decreases the radius of gyration of PNIPA compared to its value in water, whereas NaSCN increases it. Moreover, the NaSCN solution was found to be a better solvent for PNIPA compared to water, whereas Na₂SO₄ solution is worse. Small‐angle neutron scattering measurements of semidilute PNIPA solutions, at temperatures well below the phase‐transition temperature, exhibit the behavior predicted by the model of dynamic concentration fluctuations characterized by a single correlation length. Excess scattering at low angles is observed in salt solutions at temperatures that are near, yet below, the phase‐transition temperature. This may indicate intrachain heterogeneities on the scale of 6–8 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3713–3720, 2004     

Synthesis and self assembly of eosin functionalized amphiphilic block‐random copolymers prepared by ring opening metathesis polymerization

Self assembly of block copolymers has gained considerable attention because of its potential use in various areas such as medical and biomedical applications, nanotechnology, and electronics. Herein, we present the synthesis and characterization of amphiphilic block‐random copolymers with a covalently incorporated pH‐sensitive dye, namely eosin. Ring opening metathesis polymerization was chosen for the preparation of well defined block copolymers and block‐random copolymers using a modified “2nd Generation Grubbs” initiator. The self assembly behavior of the block‐random copolymers in solution was studied by dynamic light scattering and small angle X‐ray scattering (SAXS). The influence of dye incorporation on the result of the self assembly process in methanol and ethanol was investigated and a subtle interplay of the nature of the selective solvent, the chain‐length of the block copolymer and the position of the dye within the polymer chain was established. Structural investigations using SAXS revealed a spherical shape and a core‐shell structure of exemplary block and block‐random copolymer micelles. UV–vis absorption and photoluminescence measurements revealed similar optical properties for polymer micelles in methanol compared to polymer solutions in THF. The pH‐sensitive behavior of the eosin dye was preserved within the micelles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 401–413, 2008     

Impact of solvent quality on nanoparticle dispersion in semidilute and concentrated polymer solutions

We investigated how solvent quality affects the stability of polymer-grafted nanoparticles in semidilute and concentrated polymer solutions, which extends our previous studies on these types of dispersions in good solvents [Langmuir 2008, 24, 5260-5269]. As discussed in the current article, dynamic light scattering (DLS) was used to quantify the diffusion of polydimethylsiloxane-grafted silica nanoparticles, or PDMS-g-silica, in bromocyclohexane as well as in PDMS/bromocyclohexane solutions. We established that bromocyclohexane is a theta solvent for PDMS by varying the temperature of the solutions with PDMS-g-silica nanoparticles and detecting their aggregation at a theta temperature of T(Θ) = 19.6 °C. Using this temperature as a benchmark for the transition between good and bad solvent conditions, further stability tests were carried out in semidilute and concentrated polymer solutions of PDMS in bromocyclohexane at T = 10-60 °C. Irrespective of temperature, i.e., solvent quality, we found that the nanoparticles dispersed uniformly when molecular weight of the graft polymer was greater than that of the free polymer. However, when the free polymer molecular weight was greater than that of the graft polymer, the nanoparticles aggregated. Visual studies were also used to confirm the correspondence between nanoparticle stability and graft and free polymer molecular weights in a wide range of marginally poor solvents with PDMS. Further, the correspondence between nanoparticle stability and instability with graft and free polymer molecular weight and solvent quality was also supported with self-consistent mean-field calculations. Thus, by relating experiment and theory, our results indicate that nanoparticle stability in semidilute and concentrated polymer solutions is governed by interactions between the graft and free polymers under conditions of variable solvency.