Magnetocaloric properties of manganites La<Subscript>1−x</Subscript>(Ag,K)<Subscript>x</Subscript>MnO<Subscript>3</Subscript>

The temperature and magnetic-field dependences of the magnetocaloric effect in manganites La_1−x Ag _x MnO₃ (x = 0.1; 0.15; 0.2) and La_1−x K _x MnO₃ (x = 0.1; 0.11; 0.13; 0.15; 0.175) were studied by a direct method. Large changes in the sample temperature were detected as a magnetic field changed by ΔH = 10 kOe. Temperatures of the magnetocaloric effect maxima are near room temperatures. Field dependences of the magnetocaloric effect show no signs of saturation in fields to 30 kOe.     

Photoluminescence of TlCu<Subscript>1−x</Subscript>GaSe<Subscript>2</Subscript> single crystals

The results of the study of photoluminescence and its excitation spectra in Tl _x Cu_1−x GaSe₂ single crystals are presented. The crystals under study are layered and characterized by anisotropic optical properties. In this respect, it is important to investigate optical properties of the crystals under study.     

Preparation,structure and properties of La<Subscript>0.67</Subscript>Pb<Subscript>0.33</Subscript>(Mn<Subscript>1-x</Subscript>Co<Subscript>x</Subscript>)O<Subscript>3-δ</Subscript>

La_0.67Pb_0.33(Mn_1-xCo_x)O_3-δ ceramics with x=0, 0.01, 0.03, 0.06, 0.1 and 0.15 have been prepared in a two-step procedure. Precursor gels were made by the wet chemical malic acid method. The gels were calcined and then converted into ceramics by heat treatment at 950 °C and 1000 °C in air. X-ray diffraction showed that the compounds were phase pure. The crystal structure symmetry of the compounds was confirmed to be rhombohedral (space group R3̄c) for the whole investigated range of x. All compounds undergo a paramagnetic–ferromagnetic phase transition between 335 K and 225 K. The basic magnetic characteristics such as the Curie temperature , the paramagnetic Curie temperature θ, the effective magnetic moment and the saturated magnetization decrease with increasing Co doping. The ferromagnetic transition is accompanied by an anomaly in the electrical resistance for all compounds. The high-temperature insulator–metal transitions () do not coincide with the relevant . A large magnetoresistance peak of about 15% was observed for all compounds at . PACS 72.80.Ga; 75.47.Lx; 75.60.Ej     

Co-substitution effect on the structural,electrical, and electrochemical properties of nanostructured Co<Subscript>x</Subscript>Ni<Subscript>1-x</Subscript>MnP<Subscript>2</Subscript>O<Subscript>7</Subscript> (x = 0, 0.25, 0.5, and 0.75)

Cobalt-nickel-manganese pyrophosphate nanostructures with formula Co_xNi_1-xMnP₂O₇ were prepared via the hydrothermal method at 150 °C, with further calcinations at 500 °C. A structural analysis of Co_xNi_1-xMnP₂O₇ samples was carried out using X-ray diffraction (XRD). The effect of Co substitution on the structural, electrical, and electrochemical properties of Co_xNi_1-xMnP₂O₇ is reported. The electrochemical results show that the specific capacity increases from 59 to 205 mAh/g with increasing Co content. This study demonstrates the Co substitution effect on the mixed electrical conductivity. The temperature dependence of the dc electrical conductivity, for both pure and Co²⁺-doped samples, obeys the Arrhenius law. The frequency dependence of ac conductivity for the materials exhibited a Jonscher’s universal power law. The plots of pre-exponent (n) versus temperature suggested that the conduction mechanism can be described using correlated barrier hopping model. The improved electrical conductivity and electrochemical proprieties of Co_xNi_1-xMnP₂O₇ nanomaterials could be ascribed to the synergistic effect of nickel and cobalt ions. The best results have been obtained for the composition x(Co) = 0.75, where the electrical conductivity is maximum, and the Co_0.75Ni_0.25MnP₂O₇ demonstrates the highest specific capacity, implying their promising potential applications in the energy storage.     

Peculiarities of the magnetic,galvanomagnetic, elastic,and magnetoelastic properties of Sm<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript>x</Subscript>MnO<Subscript>3</Subscript> manganites

Manganites of the Sm1?xSr_xMnO₃ system (x=0.33, 0.4, and 0.45) possess giant negative values of the magnetoresistance Δρ/ρ and the volume magnetostriction ω near the Curie temperature T_C. In the compound with x=0.33, the isotherms of Δρ/ρ, ω, and magnetization σ exhibit smooth variation and do not reach saturation up to maximum magnetic field strengths (120 kOe) studied (according to the neutron diffraction data, this substance comprises a ferromagnetic (FM) matrix with distributed clusters of a layered antiferromagnetic (AFM) structure of the A type). In the compounds with x=0.4 and 0.45 containing, besides the FM matrix and A-type AFM phase, a charge-ordered AFM phase of the CE type (thermally stable to higher temperatures as compared to the A-type AFM and the FM phases), the same isotherms measured at T ≥ T_C show a jumplike increase in the interval of field strengths between H_c1 and H_c2 and then reach saturation. In the interval H_c1 > H > H_c2, the σ, ω, and Δρ/ρ values exhibit a metastable behavior. At temperatures above T_C, the anisotropic magnetostriction changes sign, which is indicative of rearrangements in the crystal structure. The giant values of ω and Δρ/ρ observed at T ≥ T_C for all compounds, together with excess (relative to the linear) thermal expansion and a maximum on the ρ(T) curve, are explained by the phenomenon of electron phase separation caused by a strong s-d exchange. The giant values of magnetoresistance and volume magnetostriction (with ω reaching ～10^?3) are attributed to an increase in the volume of the FM phase induced by the applied magnetic field. In the compound with x=0.33, this increase proceeds smoothly as the FM phase grows through the FM layers in the A-type AFM phase. In the compounds with x=0.4 and 0.45, the FM phase volume increases at the expense of the charge-ordered CE-type AFM structure (in which spins of the neighboring manganese ions possess an AFM order). The jumps observed on the σ(H) curves, whereby the magnetization σ reaches ～70% of the value at T=1.5 K, are indicative of a threshold character of the charge-ordered phase transition to the FM state. Thus, the giant values of ω and Δρ/ρ are inherent in the FM state, appearing as a result of the magnetic-field-induced transition of the charge-ordered phase to the FM state, rather than being caused by melting of this phase.     

Rotatable anisotropy of epitaxial Fe<Subscript>1−x</Subscript>Ga<Subscript>x</Subscript> thin films

We show by a combined magnetic force microscopy and synchrotron radiation spectroscopy study that stripe-like patterned magnetic domains are present in Fe_1?x Ga _x thin films. These stripes, whose origin is attributed to an out-of-plane magnetic component, can be rotated by an external magnetic field.     

Galvanomagnetic study of the quantum-well valence band of germanium in the Ge<Subscript>1−x</Subscript>Si<Subscript>x</Subscript>/Ge/Ge<Subscript>1−x</Subscript>Si<Subscript>x</Subscript> potential well

The structure of the quantum-well valence band in a Ge(111) two-dimensional layer is calculated by the self-consistent method. It is shown that the effective mass characterizing the motion of holes along the germanium layer is almost one order of magnitude smaller than the mass for the motion of heavy holes along the [111] direction in a bulk material (this mass is responsible for the formation of quantum-well levels). This creates a unique situation in which a large number of subbands appear to be populated at moderate values of the layer thickness d _w and the hole concentration p _s . The depopulation of two or more upper subbands in a 38-nm-thick germanium layer at a hole concentration p _s = 5 × 10¹⁵ m^?2 is revealed from the results of measuring the magnetoresistance in a strong magnetic field aligned parallel to the germanium layers. The destruction of the quantum Hall state at a filling factor ν = 1 indicates that the two lower subbands merge together in a self-formed potential profile of the double quantum well. It is demonstrated that, in a quasi-two-dimensional hole gas, the latter effect should be sensitive to the layer strain.     

Investigation on the effects of addition of SiO<Subscript>2</Subscript> nanoparticles on ionic conductivity,FTIR, and thermal properties of nanocomposite PMMA–LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>

Composite polymer electrolyte systems composed of poly(methyl methacrylate) (PMMA) as the host polymer, lithium trifluoromethanesulphonate (also known as lithium triflate; LiCF₃SO₃) as dopant salt, and a variety of different concentrations of nano-sized fumed silica (SiO₂) as inorganic filler were studied. The effect upon addition of SiO₂ on the ionic conductivity of the composite polymer electrolytes was investigated, and it was proven that the ionic conductivity had been enhanced. In addition, the interfacial stability also showed improvement. Maximum conductivity was obtained upon addition of 2 wt.% SiO₂. The complexation of PMMA and LiCF₃SO₃ was verified through Fourier transform infrared studies. The thermal stability of the polymer electrolytes was also found to improve after dispersion of inorganic filler. This was proven in the thermogravimetric studies.     

Simulation of the structural,electronic, and magnetic properties of Fe<Subscript>3</Subscript>C<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>B<Subscript>x</Subscript> borocementites

The structural, electronic, and magnetic properties and the enthalpy of formation of iron borocementites Fe₃C_1?x B_x (x= 0, 0.25, 0.50, 0.75, 1.00) are analyzed using ab initio calculations in the framework of the electron density functional theory. It is found that the unit cell parameter a of the orthorhombic lattice increases linearly and the parameters b and c decrease as the boron concentration increases. The density of states at the Fermi level changes only slightly, and the main variations in the band structure occur in the region of the bottom of the valence bands. The magnetic moment of the iron atoms and the total magnetization and stability of the Fe₃C_1?x B_x phases increase linearly with an increase in the boron concentration.     

Influence of Zn/Co ratio on dielectric behavior of Na<Subscript>2</Subscript>Zn<Subscript>1 ‐ x</Subscript>Co<Subscript>x</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript> glasses

A series of zinc phosphate glass doped with cobalt Na₂Zn_(1???x)Co_xP₂O₇ (x = 0, 1, 2 and 5 mol%) was synthesized. These glasses were characterized by both infrared and large broadband dielectric spectroscopy. Infrared spectra indicate the increase of Zn/Co ratio creates defect in phosphate network due to the depolymeration of phosphate anions. The dc conductivity increases and activation energy decreases with the amount of cobalt ions in the glass network. The impedance measurements reveal that the total conductivity follows Jonscher’s power law. The dielectric constant and dielectric loss increased with the temperature and decreased with the frequency whatever the cobalt proportion.     

Microwave characterization of Pb<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>O<Subscript>3</Subscript> multiferroics at X-band

The microwave characteristics of Pb_1?x Ca _x Fe_0.5Nb_0.5O₃ multiferroics (x = 0.0, 0.4, 0.45, 0.5, 0.55, 0.6), have been investigated as a function of frequency and substitution. The results depict ?13.99 dB reflection loss at 11.65 GHz in composition x = 0.6. Microwave absorption is enhanced with substitution of Ca²⁺ ions and undoped composition 0.0 behaves as electromagnetic shield. The model governing microwave absorption is discussed and different compositions for electromagnetic applications have been suggested.     

Structural and magnetic phases of Bi<Subscript>1−x</Subscript>A<Subscript>x</Subscript>FeO<Subscript>3−</Subscript><Subscript>δ</Subscript> (A = Sr,Pb) perovskites

The Bi_1−xA_xFeO_{3− δ} (A = Sr, Pb) systems have been studied using the X-ray, neutron powder diffraction and magnetization measurements in a magnetic field up to 14 T. It was found that around x ∼ 0.06 the crystal symmetry changes from a rhombohedral (space group R3c) to pseudo-tetragonal. In the composition range 0.07 ≤ x ≤ 0.14 the phases with different symmetry of the unit cell coexist independent of synthesis conditions. The neutron powder diffraction shows that the iron ions have average oxidation state close to 3+. The magnetic structure for Bi_0.5Sr_0.5FeO_{3− δ} is found to be G-type antiferromagnetic with magnetic moment of about 3.8 μ_B/Fe³⁺. The weak ferromagnetic state due to magnetoelectric interactions was revealed in the lightly doped rhombohedrally distorted compositions. No evidence for a spontaneous magnetization was observed for the pseudo-tetragonal phases. These compositions show irreversible nonlinear magnetization vs. field behavior apparently due to small local deviations from the collinearity of the magnetic moments.     

First principles study on electronic and optical properties of Al<Subscript>x</Subscript>Ga<Subscript>1−x</Subscript>N and In<Subscript>y</Subscript>Ga<Subscript>1−y</Subscript>N

The band structure, density of states of Al_xGa_1?xN and In_yGa_1?yN was performed by the first-principles method within the local density approximation. The calculated energy gaps of the AlN, Al_0.5Ga_0.5N, GaN, In_0.5Ga_0.5N and InN were 5.48, 4.23, 3.137, 1.274 and 0.504 eV, which were in agreement with the experimental result. The dielectric functions, absorption coefficient and loss function were calculated based on Kramers–Kronig relations. Further more, the relationships between electronic structure and optical properties were investigated theoretically. For Al_xGa_1?xN and In_yGa_1?yN materials, the micromechanism of the optical properties were explained.     

Structure,stability, and thermomechanical properties of Ca-substituted Pr<Subscript>2</Subscript>NiO<Subscript>4 + δ</Subscript>

Ca-substituted layered nickelates with a general Pr_2–x Ca _x NiO_{4 + δ} composition (x = 0–0.7, Δx = 0.1) were prepared in the present work and their structural and physic-chemical properties were investigated in order to select the most optimal materials, which can be used as cathodes for solid oxide fuel cells. With an increase in Ca content in Pr_2–x Ca _x NiO_{4 + δ} the following tendencies were observed: (i) a decrease in the concentration of nonstoichiometric oxygen (δ), (ii) a decrease in the unit cell parameters and volume, (iii) stabilization of the tetragonal structure, (iv) a decrease of the thermal expansion coefficients, and (v) enchancement of thermodynamic stability and compatibility with selected oxygen- and proton-conducting electrolytes. The Pr_1.9Ca_0.1NiO_{4 + δ} material, having highest δ value, departs from the general “properties–composition” dependences ascertained. This indicates that oxygen non-stoichiometry has determining influence on the functional properties of layered nickelates.     

Controlled flame synthesis of αFe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: effect of flame configuration,flame temperature,and additive loading

Superparamagnetic iron oxide nanoparticles are used in diverse applications, including optical magnetic recording, catalysts, gas sensors, targeted drug delivery, magnetic resonance imaging, and hyperthermic malignant cell therapy. Combustion synthesis of nanoparticles has significant advantages, including improved nanoparticle property control and commercial production rate capability with minimal post-processing. In the current study, superparamagnetic iron oxide nanoparticles were produced by flame synthesis using a coflow flame. The effect of flame configuration (diffusion and inverse diffusion), flame temperature, and additive loading on the final iron oxide nanoparticle morphology, elemental composition, and particle size were analyzed by transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. The synthesized nanoparticles were primarily composed of two well known forms of iron oxide, namely hematite αFe₂O₃ and magnetite Fe₃O₄. We found that the synthesized nanoparticles were smaller (6–12 nm) for an inverse diffusion flame as compared to a diffusion flame configuration (50–60 nm) when CH₄, O₂, Ar, and N₂ gas flow rates were kept constant. In order to investigate the effect of flame temperature, CH₄, O₂, Ar gas flow rates were kept constant, and N₂ gas was added as a coolant to the system. TEM analysis of iron oxide nanoparticles synthesized using an inverse diffusion flame configuration with N₂ cooling demonstrated that particles no larger than 50–60 nm in diameter can be grown, indicating that nanoparticles did not coalesce in the cooler flame. Raman spectroscopy showed that these nanoparticles were primarily magnetite, as opposed to the primarily hematite nanoparticles produced in the hot flame configuration. In order to understand the effect of additive loading on iron oxide nanoparticle morphology, an Ar stream carrying titanium-tetra-isopropoxide (TTIP) was flowed through the outer annulus along with the CH₄ in the inverse diffusion flame configuration. When particles were synthesized in the presence of the TTIP additive, larger monodispersed individual particles (50–90 nm) were synthesized as observed by TEM. In this article, we show that iron oxide nanoparticles of varied morphology, composition, and size can be synthesized and controlled by varying flame configuration, flame temperature, and additive loading.     

Structural and magnetoelectric properties of MFe<Subscript>2</Subscript>O<Subscript>4</Subscript>–PZT (M = Ni,Co) and La<Subscript>x</Subscript>(Ca,Sr)<Subscript>1-x</Subscript>MnO<Subscript>3</Subscript>–PZT multilayer composites

Thick-film layered magnetoelectric composites consisting of ferromagnetic and ferroelectric phases have been synthesized with nickel ferrite (NFO), cobalt ferrite, La_0.7Sr_0.3MnO₃ (LSMO), or La_0.7Ca_0.3MnO₃ (LCMO) and lead zirconate titanate (PZT). Structural, magnetic, and ferromagnetic resonance characterization shows evidence for defect-free ferrites, but deterioration of manganite parameters. The resistivity and dielectric constants are smaller than expected values. The magnetoelectric effect (ME) is stronger in ferrite–PZT than in manganite–PZT. The ME voltage coefficient _E at room temperature is the highest in NFO–PZT and the smallest for LCMO–PZT. The transverse ME effect is an order of magnitude stronger than the longitudinal effect. The magnitude of _E correlates well with magnetic permeability for the ferrites. PACS 75.80.+q; 75.70.Gg; 75.60.-d     

Structure,Ferroelectric, and Magnetoelectric Properties of Bulk PZT–NiFe<Subscript>1.9</Subscript>Co<Subscript>0.02</Subscript>О<Subscript>4 – δ</Subscript> Composites

The phase composition, microstructure, and dielectric, ferroelectric, magnetic, and magnetoelectric properties of bulk ceramic (1 – x)PZT–xNiFe_1.9Co_0.02О_{4 – δ} composites with 3–0 connectivity have been studied. Using X-ray diffraction and electron microscopy, it has been established that the ferrimagnetic (spinel- like) and ferroelectric (tetragonal perovskite-like) phases separately exist in the composites of all compositions. The simultaneous existence of ferroelectric and ferrimagnetic properties in the composites is confirmed by measuring their P(E) and σ(B) hysteresis loops and studying the temperature dependences of dielectric and magnetic properties. The synthesized composites have high magnetoelectric characteristics: their voltage coefficient at x = 0.4 is 215 mV/A at a frequency of 1 kHz and 130 V/A at an electromechanical resonance frequency of 380 kHz.     

Spin-polarized first-principles study of ferromagnetism in zinc-blende In<Subscript>1−x</Subscript>Mn<Subscript>x</Subscript>Sb

First-principles calculations based on the density functional theory are performed to study the structural properties, spin-polarized electronic band structures, density of states and magnetic properties of the zinc blende In_{1− x} Mn _x Sb (x = 0.125, 0.25, 0.50, 0.75, 1.0). The calculated lattice constants of In_{1− x} Mn _x Sb obey the Vegard’s law with a marginal upward bowing. With the increase of Mn concentration in In_{1− x} Mn _x Sb, a transition from the semi-metallic to the half-metallic behavior happens such that the majority-spin valence states crosses the Fermi level and the minority-spin states have a gap at the Fermi level. A large exchange splitting (∼ 4 eV) is observed between Mn 3d states of the majority-spins and the minority-spins. The total magnetic moment of In_{1− x} Mn _x Sb half-metallic ferromagnets per Mn atom basis is 4μ _B. The total magnetic moment per Mn atom indicate that Mn atoms act as acceptors in InSb and contribute to holes in the lattice of InSb. Due to p-d hybridization, the free space charge of Mn reduces that results a loss in its magnetic moment. The loss in the magnetic moment of the Mn atoms is converted into a small local magnetic moments on the In and Sb sites.     

Mechanism of the oxidation and combustion of normal paraffin hydrocarbons: Transition from C<Subscript>1</Subscript>–C<Subscript>6</Subscript> to C<Subscript>7</Subscript>H<Subscript>16</Subscript>

A previously proposed algorithm for constructing an optimal mechanism of the high- and low-temperature oxidation and combustion of normal paraffin hydrocarbons was used, which includes the major processes that determine the rate of reaction and the formation of the main intermediate and final products. The mechanism has the status of a nonempirical detailed mechanism, since all the constituent elementary reactions have a kinetic substantiation. The mechanism has two specific features: it included no reactions of so-called double addition of oxygen and no isomeric compounds and derivatives thereof as intermediate species. Realization of this algorithm leads to fairly compact models, a circumstance important for studies of chemical processes involving paraffin hydrocarbons C _n with large n. Previously, based on this algorithm, compact mechanisms of oxidation and combustion of propane, n-butane, n-pentane, and n-hexane were constructed. In this paper, we develop a nonempirical detailed mechanism of oxidation and combustion of n-heptane. The most important feature of the new mechanism is its ability to predict the staging of the process in the form of cool and blue flames at low autoignition temperatures. A comparison of the simulation results with the available experimental data is conducted.     

Synthesis,structural characterization and ionic conductivity of NASICON-type Ba<Subscript>x/2</Subscript>Li<Subscript>1-x</Subscript>Ti<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> (0.4 ≤ x ≤ 1) materials

The NASICON series, with formula Ba_x/2Li_1-xTi₂(PO₄)₃ (0.4 ≤ x ≤ 1), has been prepared by solid-state reaction and characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Raman, nuclear magnetic resonance (NMR) and impedance spectroscopy (IS). XRD patterns of samples indicated the formation of single phases with rhombohedral structure (space group R-3c). The Rietveld analysis of XRD patterns was performed to deduce location of Li and Ba ions. FTIR, Raman, and NMR techniques showed the only presence of isolated PO₄ groups in analyzed phosphates. ³¹P MAS-NMR spectra were used to investigate Li and Ba distribution and ⁷Li MAS-NMR spectra to discriminated Li ions with different mobility in conduction paths. A maximum total conductivity of 2.5 × 10^?7 S cm^?1 and a minimum activation energy of 0.47 eV were obtained at room temperature for Ba_0.3Li_0.4Ti₂(PO₄)₃ (x = 0.6).