Flower-like MoS<Subscript>2</Subscript> supported on three-dimensional graphene aerogels as high-performance anode materials for sodium-ion batteries

Flower-like MoS₂ supported on three-dimensional graphene aerogel (MoS₂/GA) composite has been prepared by a facile hydrothermal method followed by subsequent heat-treatment process. Each of MoS₂ microflowers is surrounded by the three-dimensional graphene nanosheets. The MoS₂/GA composite is applied as an anode material of sodium-ion batteries (SIBs) and it exhibits high initial discharge/charge capacities of 562.7 and 460 mAh g^?1 at a current density of 0.1 A g^?1 and good cycling performance (348.6 mAh g^?1 after 30 cycles at 0.1 A g^?1). The good Na⁺ storage properties of the MoS₂/GA composite could be attributed to the unique structure which flower-like MoS₂ are homogeneously and tightly decorated on the surface of three-dimensional graphene aerogel. Our results demonstrate that as-prepared MoS₂/GA composite has a great potential prospect as anodes for SIBs.     

Low-temperature one-step solid-phase synthesis of carbon-encapsulated TiO<Subscript>2</Subscript> nanocrystals as anode materials for lithium-ion batteries

A simple and highly efficient method is developed for in situ one-step preparation of carbon co-encapsulated anatase and rutile TiO₂ nanocrystals (TiO₂@C) with core-shell structure for lithium-ion battery anode. The synthesis is depending on the solid-phase reaction of titanocene dichloride with ammonium persulfate in an autoclave at 200 °C for 30 min. The other three titanocene complexes including bis(cyclopentadienyl)dicarbonyl titanium, cyclopentadienyltitanium trichloride, and cyclopentadienyl(cycloheptatrienyl)titanium are used instead to comprehensively investigate the formation mechanism and to improve the microstructure of the product. The huge heat generated during the explosive reaction cleaves the cyclopentadiene ligands into small carbon fragments, which form carbon shell after oxidative dehydrogenation coating on the TiO₂ nanocrystals, resulting in the formation of core-shell structure. The TiO₂ nanocrystals prepared by titanocene dichloride have an equiaxed morphology with a small diameter of 10–55 nm and the median size is 30.3 nm. Hundreds of TiO₂ nanocrystals are encapsulated together by the worm-like carbon shell, which is amorphous and about 20–30 nm in thickness. The content of TiO₂ nanocrystals in the nanocomposite is about 31.1 wt.%. This TiO₂@C anode shows stable cyclability and retains a good reversible capacity of 400 mAh g^?1 after 100 cycles at a current density of about 100 mA g^?1, owing to the enhanced conductivity and protection of carbon shell.     

Scalable synthesis and superior performance of TiO<Subscript>2</Subscript>-reduced graphene oxide composite anode for sodium-ion batteries

TiO₂-reduced graphene oxide (RGO) composite was synthesized via a sol-gel process and investigated as an anode material for sodium-ion batteries (SIBs). A remarkable improvement in sodium ion storage with a reversible capacity of 227 mAh g^?1 after 50 cycles at 50 mA g^?1 is achieved, compared to that (33 mAh g^?1) for TiO₂. The enhanced electrochemical performance of TiO₂-RGO composite is attributed to the larger specific surface area and better electrical conductivity of TiO₂-RGO composite. The excellent performance of TiO₂-RGO composite enables it a potential electrode material for SIBs.     

Fabrication and electrochemical investigation of Li<Subscript>0.5</Subscript>TiO<Subscript>2</Subscript> as anode materials for lithium ion batteries

Hexagonal and cubic Li_0.5TiO₂ particles have been fabricated through magnesiothermic reduction of Li₂TiO₃ particles in a temperature range of 600 to 640 °C. The prolonged reduction time results in lattice transition from hexagonal to cubic structure of Li_0.5TiO₂. Their microstructures, valance state, chemical composition, as well as electrochemical performance as anode candidates for lithium ion batteries have been characterized and evaluated. The hexagonal Li_0.5TiO₂ exhibits better electrochemical activity compared with the cubic one. Further, the carbon-coated hexagonal Li_0.5TiO₂ displays improved electrochemical performance with initial reversible capacity of 176.6 mAh g^?1 and excellent cyclic behavior except capacity fading in the initial 10 cycles, which demonstrate a novel anode candidate for long lifetime lithium ion batteries.     

Multi-hierarchical nanosheet-assembled chrysanthemum-structured Na<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C as electrode materials for high-performance sodium-ion batteries

The structure and morphology of sodium vanadium phosphate (Na₃V₂(PO₄)₃) play a vital role in enhancing the electrochemical performance of sodium-ion batteries due to the inherent poor electronic conductivity of the phosphate framework. In order to improve this drawback, a new chrysanthemum-structured Na₃V₂(PO₄)₃/C material has been successfully assembled with multi-hierarchical nanosheets via a hydrothermal method. Continuous scattering nanosheets in chrysanthemum petals are beneficial in reducing energy consumption during the process of sodium ion diffusion, on which the carbon-coated surface can significantly increase overall conductivity. The as-prepared sample exhibits outstanding electrochemical performance due to its unique structure. It rendered a high initial specific capacity of 117.4?mAh?g^?1 at a current density of 0.05 C. Further increasing the current density to 10 C, the initial specific capacity still achieves 101.3?mAh?g^?1 and remains at 87.5?mAh?g^?1 after 1000 cycles. In addition, a symmetrical sodium-ion full battery using the chrysanthemum-structured Na₃V₂(PO₄)₃/C materials as both the cathode and anode has been successfully fabricated, delivering the capacity of 62?mAh?g^?1 at 1?C and achieving the coulombic efficiency at an average of 96.4% within 100 cycles. These results indicate that the new chrysanthemum-structured Na₃V₂(PO₄)₃/C can provide a new idea for the development of high-performance sodium-ion batteries.     

Spray pyrolysis-deposited TiO<Subscript>2</Subscript> thin films as high-performance lithium ion battery anodes

Focusing on additive-free electrodes, thin films are of typical interest as electrodes for lithium ion battery application. Herein, we report the fabrication of TiO₂ thin films by spray pyrolysis deposition technique. X-ray diffraction and transmission electron microscopic analysis confirms the formation of anatase TiO₂. Electrochemical evaluation of these sub-micron TiO₂ thin films exhibits high-rate performance and long cycling stability. At 1C rate (1C?=?335 mA/g), the electrode delivered discharge capacity of 247 mAh/g allowing about 0.74 lithium into the structure. The electrodes also delivered specific capacities of 122 and 72 mAh/g at 10 and 30C rates, respectively. Without conductive additives, this excellent performance can be attributed to the nanosize effect of TiO₂ particles combined with the uniform porous architecture of the electrode. Upon cycling at high rates (10 and 30C), the electrode exhibited excellent cycling stability and retention, specifically only <?0.6% capacity loss per cycle over 2500 cycles.     

Anatase TiO<Subscript>2</Subscript> nanoparticles for lithium-ion batteries

Anatase TiO₂ nanoparticles were prepared by a simple sol-gel method at moderate temperature. X-ray powder diffraction (XRD) and Raman spectroscopy revealed the exclusive presence of anatase TiO₂ without impurities such as rutile or brookite TiO₂. Thermogravimetric analysis confirmed the formation of TiO₂ at about 400 °C. Particle size of about 20 nm observed by transmission electron microscopy matches well with the dimension of crystallites calculated from XRD. The electrochemical tests of the sol-gel-prepared anatase TiO₂ show promising results as electrode for lithium-ion batteries with a stable specific capacity of 174 mAh g^?1 after 30 cycles at C/10 rate. The results show that improvement of the electrochemical properties of TiO₂ to reach the performance required for use as an electrode for lithium-ion batteries requires not only nanosized porous particles but also a morphology that prevents the self-aggregation of the particles during cycling.     

Thermostable photocatalytically active TiO<Subscript>2</Subscript> anatase nanoparticles

Anatase is the low-temperature (300–550 °C) crystalline polymorph of TiO₂ and it transforms to rutile upon heating. For applications utilizing the photocatalytic properties of nanoscale anatase at elevated temperatures (over 600 °C) the issue of phase stabilisation is of major interest. In this study, binary TiO₂/SiO₂ particles were synthesized by a flame aerosol process with TiCl₄ and SiCl₄ as precursors. The theoretical Si/Ti ratio was varied in the range of 0.7–1.3 mol/mol. The synthesized TiO₂/SiO₂ samples were heat treated at 900 and 1,000 °C for 3 h to determine the thermostability of anatase. Pyrogenic TiO₂ P25 (from Evonik/Degussa, Germany) widely applied as photocatalyst was used as non-thermostabilized reference material for comparison of photocatalytic activity of powders. Both the non-calcinated and calcinated powders were characterized by means of XRD, TEM and BET. Photocatalytic activity was examined with dichloroacetic acid (DCA) chosen as a model compound. It was found that SiO₂ stabilized the material retarding the collapse of catalyst surface area during calcination. The weighted anatase content of 85% remains completely unchanged even after calcination at 1,000 °C. The presence of SiO₂ layer/bridge as spacer between TiO₂ particles freezes the grain growth: the average crystallite size increased negligibly from 17 to 18 nm even during the calcination at 1,000 °C. Due to the stabilizing effect of SiO₂ the titania nanoparticles calcinated at 900 and 1,000 °C show significant photocatalytic activity. Furthermore, the increase in photocatalytic activity with calcination temperature indicates that the titania surface becomes more accessible either due to intensified cracking of the SiO₂ layer or due to enhanced transport of SiO₂ into the necks thus releasing additional titania surface.     

Dandelion-like mesoporous Co<Subscript>3</Subscript>O<Subscript>4</Subscript> as anode materials for lithium ion batteries

A dandelion-like mesoporous Co₃O₄ was fabricated and employed as anode materials of lithium ion batteries (LIBs). The architecture and electrochemical performance of dandelion-like mesoporous Co₃O₄ were investigated through structure characterization and galvanostatic charge/discharge test. The as-prepared dandelion-like mesoporous Co₃O₄ consisted of well-distributed nanoneedles (about 40 nm in width and about 5 μm in length) with rich micropores. Electrochemical experiments illustrated that the as-prepared dandelion-like mesoporous Co₃O₄ as anode materials of LIBs exhibited high reversible specific capacity of 1430.0 mA h g^?1 and 1013.4 mA h g^?1 at the current density of 0.2 A g^?1 for the first and 100th cycle, respectively. The outstanding lithium storage properties of the as-prepared dandelion-like mesoporous Co₃O₄ might be attributed to its dandelion-like mesoporous nanostructure together with an open space between adjacent nanoneedle networks promoting the intercalation/deintercalation of lithium ions and the charge transfer on the electrode. The enhanced capacity as well as its high-rate capability made the as-prepared dandelion-like mesoporous Co₃O₄ to be a good candidate as a high-performance anode material for LIBs.     

LiFePO<Subscript>4</Subscript> composites decorated with nitrogen-doped carbon as superior cathode materials for lithium-ion batteries

The development of methods to synthesize electrode materials can improve the performance of lithium ion storage. In this study, a facile and low-cost approach is employed to synthesize LiFePO₄ (LFP/NC) hybrid materials decorated with nitrogen-doped carbon nanomaterials (NC). Melamine was used as nitrogen and carbon source with an NC to LFP ratio of 3.19%. As electrode materials for lithium ion batteries (LIBs), the LFP/NC composites exhibit an optimum performance with a high rate capacity of 144.6 mAh·g^?1 at 1 C after 500 cycles without apparent loss. The outstanding cycling stability may be attributed to the synergetic effects of well-crystallized particles and NC layers.     

V<Subscript>2</Subscript>O<Subscript>5</Subscript>-SiO<Subscript>2</Subscript> hybrid as anode material for aqueous rechargeable lithium batteries

V₂O₅-SiO₂ hybrid material was fabricated by heat-treating a mixture of H₂SiO₃ and V₂O₅. SEM, TEM, XRD, and N₂ isotherm analyses were performed to characterize the morphology and structure details of the as-prepared V₂O₅-SiO₂. The possibility of using the as-prepared V₂O₅-SiO₂ as anode material for aqueous lithium-ion batteries was investigated. Potentiostatic and galvanostatic results indicated that the intercalation/de-intercalation of Li⁺ in this material in aqueous electrolyte was quasi-reversible. It was also found that a discharge capacity of up to 199.1 mAh g^?1 was obtained at a current density of 50 mA g^?1 in aqueous solution of 1 M Li₂SO₄, a value which is much higher than the available reported capacities of vanadium (+5) oxides in aqueous electrolytes.     

Carbon-coated hollow CoO microporous nanospheres synthesized by CoF<Subscript>2</Subscript> as the intermediates as anode materials for lithium-ion batteries

Uniformly carbon-coated hollow CoO microporous nanospheres have been successfully synthesized by the facile hydrothermal method using CoF₂ as the intermediates and glucose as the carbon source. The whole synthesis process can avoid using the toxic surfactant additives and tedious post-processing. The glucose-derived carbon not only suppresses the aggregation of CoO nanoparticles, but also plays an important role on the stabilization of hollow CoO microporous nanosphere structure. The specific structure can largely improve the electronic conductivity and accommodate the volume change of CoO electrode in the electrochemical processes. When used as anode materials of lithium ion batteries, the hollow CoO/C microporous composites exhibit exceptionally high-rate performances, high-specific capacity, and improved cycle performances. This study may provide a new approach for the synthesis of carbon-coated hollow microporous architecture electrode for high-performance batteries.     

In situ,facile synthesis of La<Subscript>0.8</Subscript>Sr<Subscript>0.2</Subscript>MnO<Subscript>3</Subscript>/nitrogen-doped graphene: a high-performance catalyst for rechargeable Li-O<Subscript>2</Subscript> batteries

We have successfully devised a simple method to synthesize La_0.8Sr_0.2MnO₃ with nitrogen-doped graphene composites (LSM/NrGO) and investigated their catalytic performance in the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Interestingly, the LSM/NrGO composites demonstrate outstanding catalytic performance in ORR, including high limiting current density and superior onset potential, compared to bare LSM nanocrystals or nitrogen-doped graphene, showing a performance close to that of commercial Pt/C. Moreover, Li-O₂ batteries assembled based on the LSM/NrGO catalysts exhibited brilliant performance, especially during long-term cycling, where the terminal discharge voltage still exceeded 2.31 V after 360 cycles. The excellent catalytic performance is mainly attributed to the large specific surface area (152.24 m² g^?1) of the materials, which provides many catalytic active sites, and the mesoporous structure (2 to 50 nm), which can facilitate the penetration of oxygen molecules into the surface of the nanoparticles and mass transfer.     

NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> polyhedra with controllable particle size as high-performance anode for lithium-ion battery

Different particle sizes of dodecahedron precursors are synthesized by controlling the polarity of the solution. Through the results of scanning electron microscope (SEM) images, it can be found that different particle sizes of precursors present obvious edge angles and their morphology can be well retained after annealing. X-ray diffraction (XRD) measurements suggest that the annealed polyhedral products are pure single-phase NiCo₂O₄. When tested as lithium-ion battery anode, 0.5 μm NiCo₂O₄ polyhedra exhibits a specific capacity of 1050 mAh g^?1 at 0.1 C at the 60th cycle, which was higher than theoretical capacity of single metal oxide (NiO 718 mAh g^?1 and Co₃O₄ 890 mAh g^?1). It also exhibits the highest rate capability with an average discharge capacity of 890, 700, 490, 330, and 300 mAh g^?1 at 0.5, 2, 4, 8, and 10 C, respectively. Those advantages are attributed to that small-sized particle with great surface areas decrease the actual current density at the surface and inner of the prepared electrode.     

Fabrication of urchin-like NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> microspheres assembled by using SDS as soft template for anode materials of Lithium-ion batteries

In this paper, the urchin-like NiCo₂O₄ microspheres assembled by using sodium dodecyl sulfate (SDS) as soft template are successfully fabricated by a facile procedure including microemulsion-solvothermal reaction and subsequent calcination at 400 °C for 4 h. The structure and morphology of synthesized NiCo₂O₄ particles are investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). It has been clearly revealed that the prepared three-dimensional urchin-like NiCo₂O₄ microspheres are constituted by one-dimension nanowires. As it is applied to anode for lithium-ion batteries (LIBs), the initial coulombic efficiency is up to 75.7%, and the specific reversible capacity retains up to 1034.2 mAh/g even after 40 cycles at a current density of 100 mA/g. Furthermore, as the current density gradually increases to 800 mA/g, it still delivers the reversible capacity of 895.4 mAh/g. The high reversible specific capacity, perfect cyclability, and rate performance are attributed to the unique urchin-like NiCo₂O₄ microspheres, which can alleviate the volume expansion and shorten the diffusion path of ions and electrons during lithiation/delithiation process. The self-standing urchin-like NiCo₂O₄ microspheres may be a very promising candidate in place of the commercial graphite-based anode materials for high-performance LIBs.     

Efficient carbon-doped nanostructured TiO<Subscript>2</Subscript> (anatase) film for photoelectrochemical solar cells

In this paper, we have demonstrated that carbon-doped nanostructured TiO₂ (CD ns-TiO₂) films could be prepared simply and cheaply with oxalic acid and tetrabutylammonium bromide (Bu₄N·Br) as the carbon sources. The surface morphology of the films was a multiple-porous network structure.The average size of nanoparticle was about 40 nm. Carbon doped into substitutional sites of TiO₂ has also proven to be indispensable for band-gap narrowing and photovoltaic effect. Carbon doping lowered the band gap of n-TiO₂ to 1.98, 1.64, and 1.26 eV. The CD ns-TiO₂ film was first used as photoanode for solar cells, exhibiting high photocurrent densities (l.34 mA/cm²) and yielding an overall conversion efficiency (η) of 4.42 %.     

A novel approach to employ Li<Subscript>2</Subscript>MnSiO<Subscript>4</Subscript> as anode active material for lithium batteries

In the present paper, we describe utilization of cathode active material as anode active material, for example, Li₂MnSiO₄. The lithium manganese silicate has been successfully synthesized by solid-state reaction method. The X-ray diffraction pattern confirms the orthorhombic structure with Pmn2 ₁ space group. The Li/Li₂MnSiO₄ cell delivered the initial discharge capacity of 420 mA h g⁻¹, which is 110 mA h g⁻¹ higher than graphitic anodes. The electrochemical reversibility and solid electrolyte interface formation of the Li₂MnSiO₄ electrode was emphasized by cyclic voltammetry.     

Evaluation of nanoparticle emission for TiO<Subscript>2</Subscript> nanopowder coating materials

In this study, nanoparticle emission of TiO₂ nanopowder coated on different substrates including wood, polymer, and tile, was evaluated in a simulation box and measured with a Scanning Mobility Particle Sizer (SMPS) for the first time. The coating process for the substrate followed the instructions given by the supply company. In the simulation box, UV light, a fan, and a rubber knife were used to simulate the sun light, wind, and human contacting conditions. Among the three selected substrates, tile coated with TiO₂ nanopowder was found to have the highest particle emission (22 #/cm³ at 55 nm) due to nanopowder separation during the simulation process. The UV light was shown to increase the release of particle below 200 nm from TiO₂ nanopowder coating materials. The results show that, under the conditions of UV lamps, a fan and scraping motion, particle number concentration or average emission rate decreases significantly after 60 and 90 min for TiO₂/polymer and TiO₂/wood, respectively. However, the emission rate continued to increase after 2 h of testing for TiO₂/tile. It is suggested that nanoparticle emission evaluation is necessary for products with nanopowder coating.     

Carbon@SnS<Subscript>2</Subscript> core-shell microspheres for lithium-ion battery anode materials

A novel unique C@SnS₂ core-shell structure composites consisting of well-dispersity carbon microspheres and ultrathin tin disulfide nanosheets were successfully synthesized for the first time through a simple solvothermal method. The thin SnS₂ nanosheets grew onto the carbon microspheres surfaces perpendicularly and formed the close-knit porous structure. When it was used as anode materials for lithium-ion batteries, the hybrid C@SnS₂ core-shell structure composites showed a remarkable electrochemical property than pure SnS₂ nanosheets. Typically, the hybrid composites with SnS₂ nanosheet shells and carbon microsphere’s core exhibited an excellent initial discharge capacity of 1611.6 mAh/g. Moreover, the hybrid composites exhibited capacities of 474.8–691.6 mAh/g at 100 mA/g over 50 battery cycles, while the pure SnS₂ could deliver capacities of 243–517.6 mAh/g in the tests. The results indicated that the improvement of lithium storage performance of the core-shell structure C@SnS₂ anode materials in terms of rate capability and cycling reversibility owing to the introduction of the smooth carbon microspheres and special designing of core-shell structure.