New fluorinated acrylic monomers for the surface modification of UV‐curable systems

New fluorinated acrylates were synthesized and used as modifying additives for acrylic UV‐curable systems. Their chemical structure is: C_nF_2n+1 R—OCO—CHCH₂, where the linear perfluorinated chain contains from 4 to 10 carbon atoms, while R is a linear alkyl group containing or not a thioether group. Notwithstanding their very low concentration, the fluorinated monomers caused a dramatic change of the surface properties of the films, without changing their curing conditions and their bulk properties. X‐ray photoelectron spectroscopy measurements showed that the monomers were able to concentrate selectively on the surfaces of the films, depending on their chemical structure and on the kind of substrate employed. The synthesis of the fluorinated monomers and the relationship between their chemical structure and the final surface properties of the UV‐cured films will be discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 77–87, 1999     

Facile hydrophobic modification of hybrid poly(urethane-urea)methacrylate aqueous dispersions and films through blending with novel waterborne fluorinated acrylic copolymers

Aqueous dispersions of fluorinated particles (PBF) based on copolymers of butyl acrylate with 2-(perfluorononenyloxy)ethyl methacrylate (FNEMA), 2,2,3,3-tetrafluoropropyl acrylate, and 2,2,3,3,4,4,5,5-octafluoropentyl acrylate, respectively, were synthesized by emulsion polymerization in the presence of unfluorinated and fluorinated anionic surfactant binary mixtures. These fluorinated dispersions showed good to excellent colloidal stability, as determined by freeze–thaw, centrifugation, and critical coagulation concentration measurements. Blending of small amounts (1–10 wt.%) of PBF latex particles with a waterborne hybrid poly(urethane-urea)-methacrylate (PUUA) resulted in a series of slightly fluorinated modified PUUA with good film-forming properties and low surface energy. The precursor PUUA had been synthesized separately by simultaneous chain extension of a poly(ester-urethane)-diisocyanate with ethylenediamine and soapless free radical polymerization of methyl methacrylate swelling the resulting branched or slightly cross-linked poly(urethane-urea) self-dispersible ionomer particles. The results of dynamic light scattering and zeta potential measurements suggest that the merging of PUUA and PBF particles and either engulfing or interdiffusion of the incompatible macromolecular phases occurred to some extent already in the colloidal state. Highly hydrophobic films with surface energy as low as 17 mJ/m² were obtained upon the hybridization of PUUA with the FNEMA copolymer. Thermal annealing allowed minimizing the effects of fast surface dynamics, leading ultimately to water absorption, and promoting synergistic enhancement of the resulting hybrid film hardness, as required for coating applications.     

Fluorinated networks through photopolymerisation processes: synthesis, characterisation and properties

The study concerns the UV curing of systems containing fluorinated products. New difunctional and monofunctional monomers and oligomers bearing either radical or cationic photopolymerisable functionalities were synthesised. They were UV cured and the properties of the films obtained were investigated. In some cases biphasic structures were obtained, showing the separation between the fluorinated and hydrogenated domains at nanometric level. By copolymerising a low amount of the fluorinated additive with hydrogenated resins, the bulk properties of the films were not changed, but a deep modification of the surface was obtained. In all cases a selective enrichment of the fluorinated monomer at the film surface was observed. The dependence of the surface properties on the monomer structure, on its concentration and on the type of substrate was studied.     

PREPARATION AND SURFACE PROPERTIES OF ACRYLIC COPOLYMERS CONTAINING FLUORINATED MONOMERS

A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The surface property of the copolymer films was subsequently characterized. The contact angle measurements and energy dispersive analysis of X-ray （EDAX） show that the length and content of perfluoroalkyl side chains in the copolymers are crucial for the preparation of the film with low surface energy. At a given content of fluorinated monomers in the copolymers, the longer the perfluoroalkyl side chain, the larger the water contact angle of the copolymer films will be. On the other hand, the higher the content of fluorinated monomers, the lower the surface energy is. The water contact angle increases with the increase of the fluorinated monomer content and reaches a plateau at 3 wt% of fluorinated monomer content.     

Synthesis of new fluorinated allyl ethers for the surface modification of thiol–ene ultraviolet‐curable formulations

Thiol–ene photocurable systems based on a trifunctional thiol [trimethylolpropane tris‐(3‐mercaptopropanoate)] and two different multifunctional allyl ethers (trimethylolpropane triallyl ether and Boltorn U2, an allyl functional dendritic polyester) were examined. To these systems, small amounts (<1 wt %) of fluorinated allyl ethers were added for the modification of their surface properties. Two new fluorinated allyl ethers, 1H,1H‐perfluoro‐1‐heptylallyl ether and 1H,1H‐perfluoro‐1‐decylallyl ether, were synthesized for this purpose by allylation of the corresponding 1H,1H‐perfluoro alcohols. The fluorinated monomers, despite their very low concentrations, caused sharp changes in the surface properties of the films and in the solvent resistance without any changes in the curing conditions and bulk properties. Completely hydrophobic surfaces were obtained (as a result of the selective enrichment of the fluorinated monomers on the film surfaces) that depended on the monomer structure and its concentration. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2583–2590, 2002     

含氟高分子/SiO_2杂化疏水材料的制备及涂层表面性质

采用自由基溶液聚合与溶胶-凝胶法相结合的方法制备了含氟高分子/SiO2杂化疏水材料.通过甲基丙烯酸十二氟庚酯(FA)与乙烯基三乙氧基硅烷(VTES)共聚合成了含氟硅共聚物(PFAS),进一步通过原硅酸乙酯(TEOS)与PFAS共聚物溶液共水解缩聚制备了具有含氟侧基的碳碳主链高分子和硅氧网络的含氟高分子/SiO2杂化疏水材料.研究结果表明,SiO2组分含量提高可以显著增加杂化材料薄膜的涂敷厚度,改善其耐久性能,而对杂化材料疏水性能的影响不大.     

Structure and surface properties of fluorinated organic–inorganic hybrid films

Fluorinated organic–inorganic hybrid films were prepared by sol–gel process from tridecafluoroctyltriethoxysilane (PFAS), 3-glycidoxypropyltrimethoxysilane, and tetraethoxysilane (TEOS). It has been found that the fluorinated hybrid films possessed fluorinated side chains originating from PFAS as top layer, and silica network as bottom layer, which had very low surface energy and could be used as water repellent functional coatings. The outermost layer of the water-repellent film may be fully covered by the perfluoroalkyl side chains as the molar ratio of PFAS/TEOS increases up to about 0.005:1. The addition of BPA can enhance the cross-link density of fluorinated hybrid films, and make more perfluoroalkyl groups enriching at the coating film-air interface to lower the surface free energy. However, the improvement of the cross-link density of fluorinated hybrid films tends to exhibit brittleness and micro-cracks. Consequently, it can be concluded that a small BPA additive content is preferred for the formation of fluorinated hybrid films with a smooth surface and less detectable cracks.     

Preparation and properties of a novel waterborne fluorinated polyurethane–acrylate hybrid emulsion

The waterborne fluorinated polyurethane–acrylate hybrid emulsion (WFPUA) was prepared by two steps, including the preparation of the fluorinated alcohol blocked polyurethanes (FBPU) in the mixtures of vinyl monomers and fluorinated monomers and then the free radical polymerization after the pre-emulsification of the said system. The effects of hydrophilic monomer (MDEA) on the surfactivity and the emulsifiability of the FBPU were firstly reported. Then, the particle size (d), zeta potential (ζ), and viscosity (η) of the WFPUA hybrid emulsion were characterized, respectively. At the same time, the surface properties and the mechanical properties of the films were investigated. The results show that the increase of MDEA is good for the emulsifiability and the lower surface tension of the FBPU. This increase improves the stability, the ζ and η, yet decreases the d of the WFPUA emulsion. However, it has disadvantages to the hydrophobic performance of the WFPUA films. When the content of the MDEA in the WFPUA is increased from 4.67 to 14.89 %, the surface free energies are increased from 22.22 to 27.28 mJ m^?2 and the attenuation rate of the contact angle–time curve is increased from 0.3051° to 0.6290°/min. Also, with the increase of MDEA, the tensile strength and the shore hardness of the film are increased, but its elongation at break is decreased. The storage moduli of the film are enhanced remarkably. Meanwhile, the glass transition temperature of the soft segment [T_g(s)] is reduced and that of the hard segment [T_g(h)] is raised.     

Fluorinated 2-Vinylcyclopropane Copolymers as Low Surface Energy Materials

The surface structure and surface energy properties of fluorinated 2-vinylcyclopropane copolymers were investigated. The copolymers were prepared by free radical ring opening polymerization of fluorinated 1 and non-fluorinated 2 2-vinylcyclopropanes. NEXAFS experiments proved that the film surface was ordered with the fluorinated side groups possessing a relatively high orientational order. Contact angle measurements with different interrogating liquids permitted the polymer surface tension to be estimated. These surfaces showed both hydrophobic and oleophobic character, consistent with a low surface energy.     

Synthesis and properties of novel fluorinated epoxy resins based on 1,1-bis(4-glycidylesterphenyl)-1-(3′-trifluoromethylphenyl)-2,2,2-trifluoroethane

A novel fluorinated epoxy resin, 1,1-bis(4-glycidylesterphenyl)-1-(3′-trifluoromethylphenyl)-2,2,2-trifluoroethane (BGTF), was synthesized through a four-step procedure, which was then cured with hexahydro-4-methylphthalic anhydride (HMPA) and 4,4′-diaminodiphenyl-methane (DDM). As comparison, a commercial available epoxy resin, bisphenol A diglycidyl ether (BADGE), cured with the same curing agents was also investigated. We found that the BGTF gave the exothermic starting temperature lower than BADGE no mater what kind of curing agents applied, implying the reactivity of the former is higher than the latter. The fully cured fluorinated BGTF epoxy resins have good thermal stability with glass transition temperature of 170-175 °C and thermal decomposition temperature at 5% weight loss of 370-382 °C in nitrogen. The fluorinated BGTF epoxy resins also showed the mechanical properties as good as the commercial BADGE epoxy resins. The cured BGTF epoxy resins exhibited improved dielectric properties as compared with the BADGE epoxy resins with the dielectric constants and the dissipation factors lower than 3.3 and dissipation 2.8 × 10⁻³, respectively, which is related to the low polarizability of the C-F bond and the large free volume of CF₃ groups in the polymer. The BGTF epoxy resins also gave low water absorption because of the existence of hydrophobic fluorine atom.     

Convenient synthesis of novel fluorinated polyurethane hybrid latexes and core-shell structures via emulsion polymerization process with self-emulsification of polyurethane

Novel fluorinated polyurethane hybrid latexes in the size range of 40–50 nm, fluoroalkyl acrylate as fluorinated monomers, with various fluorine content (F% = 9∼26 wt%) were successfully prepared via emulsion polymerization process without traditional emulsifier. The waterborne polyurethane, which was synthesized by using isophronediisocyanate, dimethylol propionic acid, polyethylene glycols, etc., served not only as copolymerizable macromonomer but also as polymeric high molecular weight emulsifier. The structures of polyurethane macromonomer and fluorinated polyurethane were characterized by Fourier transform infrared and H¹-NMR. Particle size, zeta potential, micromorphology of the latex par.ticles, and surface properties were investigated by dynamic light scattering, potential particle size analyzer, transmission electron microscopy, and contact angle measurement, respectively. Results illustrated that the advantage of this process is that the size of fluorinated polyurethane hybrid particle is less sensitive to the composition. Furthermore, it was showed that fluorinated polyurethane latex particles had core-shell structures, especially when the content of fluorine was 26.08 wt%. Moreover, there was an obvious migration of fluorinated groups to the surface during the formation of fluorinated polymer films, although fluorinated groups were covered by polyurethane in latex particles.     

Effect of the structural parameters of a series of fluoromonoacrylates on the surface properties of cured films

A series of fluorinated acrylates [F(CF₂)_q? (CH₂)_p? OCOCH?CH₂, where q = 8 and p = 2 ÷ 11) were synthesized and used as comonomers in the photopolymerization of acrylic systems. These fluoroacrylates were synthesized in a three‐step procedure through the radical addition of perfluoroalkyliodides to an unsaturated alcohol followed by their acrylation. The mixtures, containing up to 0.8% (w/w) of the comonomers, produced transparent films after UV curing; they showed changes in the surface properties as a function of the comonomer type and concentration. With contact‐angle and X‐ray photoelectron spectroscopy analyses, the relationship between the structure of the monomers and the surface properties of the UV‐cured films was investigated: the wettability decreased, depending on the length of the fluorinated group (q value) and the hydrogenated segment of the monomer (p value). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4227–4235, 2001     

Emulsifier-free latex of fluorinated acrylate copolymer

Emulsifier-free latices of fluorinated acrylate copolymers were prepared by semicontinuous polymerization method, with perfluoroalkylethyl methacrylate (Zonyl TM) as a fluoromonomer. Ultrasonic at 40 kHz was adopted to help monomers disperse well in water. The relationships of polymerization conditions between the final conversion and polymerization stability were discussed in detail and the optimal polymerization condition was given. A fluorinated acrylate copolymer was finally obtained and its T_g was 54 °C. The average particle size of the latex was about 601 nm and the particle size distribution of the latex was narrow. The latex film exhibited a low surface free energy and good surface property. By using 6% Zonyl TM, the water contact angle of the film-air interface increased significantly and reached to 110.2°. Compared with the latex film of fluorine-free polyacrylate prepared under the similar polymerization condition, the fluorinated latex film had a better water-resistance and thermal stability.     

Preparation of an environmentally friendly antifouling degradable polyurethane coating material based on medium-length fluorinated diols

A novel medium-length fluorinated diols and poly(L-lactide) (PLLA) were synthesized via Michael addition reaction and ring-opening polymerization, respectively. Subsequently, Synthetic medium-length fluorinated diols and PLLA were combined to prepare new polyurethane composites with degradability and low surface energy. The compositional analysis and structural characterization of synthetic materials were characterized by using fourier transform infrared spectroscopy (FT-IR) and proton nuclear magnetic resonance spectra (¹HNMR). Thermogravimetric analysis(TGA) indicated that the introduction of medium-length fluorinated diols improved the thermal stability of the polyurethane. The biodegradation and low surface energy of the polyurethane were investigated by static hydrolysis experiment and water contact angle test. It was found that the degradation rate of the polyurethane increased as measurement time went on when the PLLA content was under 40%, and the water contact angle increased from 71.12° to 108.24° with the increase of fluorine content, which indicated that the degradable and low surface energy polyurethane has a potential as a coating material for a marine antifouling coating application.     

Preparation,characterization, and properties of fluorinated polyurethanes

Novel fluorinated polyurethanes (FPUs) were prepared by living radical polymerization of polyurethanes and hexafluorobutyl acrylate. The structures of the FPUs were characterized by FTIR, ¹H NMR, GPC, DSC, and XPS. The fluorinated polyurethane polymerization was investigated and showed monomer conversion, and molecular weight increased with increasing reaction time. In this way, the fluorine content in polyurethane could be easily adjusted by controlling the content of the fluorinated acrylate monomer. The mechanical evaluation shows that FPUs exhibit good mechanical properties. Morphology of FPU films was observed by scanning electron spectroscopy. The effects of the fluorine content on the surface properties and oxidative stability of FPUs were investigated. FPUs films were devoid of significant surface degradation after immersion in 20% H₂O₂ and 0.1 M CoCl₂ at 37 °C for 5 weeks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3248–3256, 2009     

Cross‐linked waterborne alkyd hybrid resin coatings modified by fluorinated acrylate‐siloxane with high waterproof and anticorrosive performance

Waterborne alkyd resin coatings are ideal for use as corrosion protection coatings because of its high cost‐effective and environmental advantages. However, their uses are restricted to general applications due to their poor acid, water, and alkali resistance. In this work, waterborne alkyd hybrid resins modified with fluorinated acrylate‐siloxane were synthesized via a surfactant‐free miniemulsion polymerization process using maleic anhydride and silicon modified alkyd resin, dodecafluoroheptyl methacrylate, methyl methacrylate, and butyl acrylate as monomers. And then, crosslinking alkyd resin films were prepared at room temperature using trimethylolpropane‐tris‐(β‐N‐azir‐idinyl) propionate (XR‐100) as the crosslinking agent. The acquired films had lower water absorption and higher water contact angles and had better mechanical/thermal properties, as well as good waterproof property. Most importantly, the electrochemical corrosion studies revealed that the cross‐linked coating exhibited superior corrosion resistance performance with an inhibition efficiency of 99.95% and a corrosion rate of 6.95 × 10^?3 mm per year.     

Hydrocarbon versus fluorocarbon in the electrodeposition of superhydrophobic polymer films

To elaborate on superhydrophobic surfaces, we report the electrochemical synthesis, surface morphology, and wettability of hydrocarbon conductive polymer films obtained by the electrodeposition of polythiophene, poly(3,4-ethylenedioxythiophene) (i.e., PEDOT), and poly(3,4-ethylenedioxypyrrole) (i.e., PEDOP) derivatives. Highly hydrophobic films were obtained from n-C(14)H(29) and n-C(8)H(17) chains in the cases of polythiophenes and PEDOP, respectively. By contrast, superhydrophobic films were formed by the deposition of PEDOT substituted with n-C(10)H(21) chains (PEDOT-methyl undecanoate): static contact angle ≈ 160.6°, hysteresis ≈ 2°, and sliding angle ≈ 3°. Their surface properties were compared to those of previously reported fluorinated analogues. The water-repellent properties of PEDOT-methyl undecanoate were similar to the best surface properties obtained with fluorinated monomers. Even if the main approach for the chemical factor to build up superhydrophobic surfaces is via a coating of a fluorinated compound, this work confirms that the formation of fractal surfaces is able to achieve super-anti-wetting properties within a hydrocarbon series (less expensive with a favorable ecotoxic approach), and it opens a new path to bioinspired surfaces.     

亲水单体对聚氨酯-含氟丙烯酸酯复合乳液颗粒和表面性能的影响

为了提高聚氨酯-丙烯酸酯聚合物的耐水性和耐溶剂性, 将N-甲基二乙醇胺(MDEA)扩链的交联聚氨酯丙酮溶液作为反应介质, 以苯乙烯、丙烯酸丁酯、含氟丙烯酸酯(FA)为单体, 过氧化苯甲酰为引发剂, 通过溶液聚合相转化法制得新型阳离子聚氨酯-含氟丙烯酸酯复合乳液. 研究了MDEA对聚合物水分散液的乳胶粒径、Zeta电位以及乳胶膜表面性能的影响, 并用FTIR, TEM对聚合物的结构和乳胶粒形态进行了表征. 结果表明, MDEA的添加利于降低乳胶粒径, 但对乳胶膜的疏水性能有不利影响, 当MDEA的质量分数为13.15%时, FPUA乳胶粒的形态呈球形, 粒径约为253 nm, 乳胶膜的表面自由能低于25.1 mJ/m², 接触角衰减速率约为0.38 (º)/min. 另外, 乳胶膜的高温处理能够使表面自由能降低11.5%以上.     

Synthesis,UV-curing Behavior and Surface Properties of New Fluorine-containing Aromatic Oxetane Monomers

In this paper,we combined high-end cationic UV-curable material with fluorinated chain obtaining a series of new fluorine-containing aromatic oxetane monomers via a mild nucleophilic substitution reaction.The structures and properties of monomers were characterized using 1H-NMR,19F-NMR,dynamic viscosity tests and differential scanning calorimetry (DSC).It was determined that all of the fluorinated monomers obtained had much lower viscosity and higher thermostability after the introduction of hexafluorobenzene.Then,UV-curable coatings were prepared using four fluorine-containing aromatic oxetane monomers (FOX1-4);the UV-curing kinetics,with three kinds of initiators,and properties of the cured films were evaluated using real-time Fourier transform infrared (FTIR) spectroscopy,water and diiodomethane contact angle tests,surface energy calculations and scanning electron microscopy (SEM).The FTIR spectroscopy results showed that the coatings possessed excellent conversion rate (＞ 99％ with liquid initiator PAG-201 in 150 s),and as the fluorine content increased,the monomers exhibited decreased mobility with the increasing viscosity and worse solubility with fluorinated monomers,resulting in a lower conversion rate.Moreover,the coatings possessed favorable hydrophobic and oleophobic properties and low surface energies owing to the fluoride chains floating to the membrane-air interface,which was also confirmed by discrete concave structures in SEM images.These new kinds of monomers can replace traditional fluorinated cationic monomers applied to the fingerprint resistant,fouling resistant,scratch resistant and anti-aging coatings,adhesives or printing ink materials.     

Synthesis and characterization of copolymers based on styrene and partially fluorinated acrylates

Copolymers of styrene and fluorinated acrylate monomers with F-octylalkyl, F(CF₂)₈(CH₂)_n^′ side groups were prepared by free radical polymerization. Thermal behaviour of the resulting polymers was investigated by DSC and TGA. Even if at the macroscopic scale the polymers surfaces are homogeneous and clear, the analysis indicates that all samples exhibit two glass transitions temperatures. This discontinuity may be regarded as an indication for microphase separation of fluorine-rich and polystyrene-rich microphases. Water and hexadecane contact angles measurements show that these polymers are quite surface active in the solid state. Surface and bulk organizations were investigated by XPS analysis. A strong correlation between bulk organization and surface properties of the polymers could be established. Preferential adsorption of fluorinated segments at the material surface were more pronounced than expected in the bulk.