Photoirradiated Fe-Mediated AGET ATRP of Methyl Methacrylate in the Presence of Alcohol

In this study, photoirradiated Fe-mediated AGET (activators generated by electron transfer) atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was investigated at ambient temperature in N,N-dimethylformamide (DMF) using carbon tetrachloride as initiator, FeCl₃·6H₂O/bipyridine (Bpy) as catalyst complex, and alcohol as reducing agent. Linear semi-logarithmic plot of conversion vs. time was obtained from the kinetic experiments, and the number-average molecular weight increased linearly with monomer conversion and corresponded to the theoretic values with molecular weight distributions (M_w/M_n) as low as 1.25, which agreed with the character of controlled/living polymerization. The kinds of alcohol played an important role in photoirradiated Fe-mediated AGET ATRP of MMA. The living characteristics were demonstrated through chain extension experiment. The obtained polymer was characterized by proton nuclear magnetic resonance (NMR) and gel permeation chromatography.     

Samarium(III)-based AGET ATRP of Acrylonitrile Using Ascorbic Acid as Reducing Agent

Atom transfer radical polymerization using activators generated by electron transfer (AGET ATRP) of acrylonitrile (AN) initiated by ethyl 2-bromoisobutyrate (EBiB) was approached for the first time in the absence of oxygen and in the presence of air, using a novel catalyst system based on SmBr₃·6H₂O/isophthalic acid complexes and using ascorbic acid (VC) as a reducing agent. Both the polymerization in the absence of oxygen and in the presence of air proceeded in a well-controlled manner as evidenced by kinetic studies. Compared with the polymerization in the absence of oxygen, the polymerization in the presence of air provided rather slow reaction rate and showed better control of molecular weight and its distribution under the same experimental conditions. The polymerization apparent activation energies in the absence of oxygen and in the presence of air were calculated to be 47.1 and 51.3 kJ·mol^?1, respectively. A slow polymerization rate and a broad polydispersity index were observed using anisole and toluene instead of DMF as solvent. Polyacrylonitrile obtained was successfully used as a macroinitiator to proceed the chain extension polymerization of styrene via AGET ATRP in the presence of air.     

Copper Catalyzed ATRP of Methyl Methacrylate Using Aliphatic α-Bromo Ketone Initiator

The atom transfer radical polymerization (ATRP) of MMA was examined using 3-bromo-3-methyl-butanone-2 (MBB) as an initiator in the presence of CuBr as catalyst and 2,6-bis[1-(2,6-diisopropylphenylimino)ethyl]pyridine (BPIEP) as a tridentate N-donor ligand. The effect of various other N-donor ligands including a bisoxazoline ligand, namely, 2,6-bis(4,4-dimethyl-2-oxazolin-2-yl) pyridine (dmPYBOX) was studied in ATRP and reverse ATRP of MMA. The ATRP of MMA in toluene at 90 °C using MBB as initiator was relatively slow in the case of bidentate and faster in the case of tridentate N-donor ligands. The apparent rate constant, k_app, with MBB as initiator and BPIEP as ligand in toluene (50%, v/v) at 90 °C was found to be 7.15 × 10⁻⁵ s⁻¹. In addition, reverse ATRP of MMA in diphenylether at 70 °C using BPIEP/CuBr₂ as catalyst system was very effective in reducing the reaction time from several hours to 24 h for polymerization of MMA.     

2‐[(Diphenylphosphino)methyl]pyridine as ligand for iron‐based atom transfer radical polymerization

2‐[(Diphenylphosphino)methyl]pyridine (DPPMP) was successfully used as a bidentate ligand in the iron‐mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) with various initiators and solvents. The effect of the catalytic system on ATRP was studied systematically. Most of the polymerizations with DPPMP ligand were well controlled with a linear increase in the number‐average molecular weights (M_n) versus conversion and relatively low molecular weight distributions (M_w/M_n = 1.10–1.3) being observed throughout the reactions, and the measured molecular weights matched the predicted values. Initially added iron(III) bromide improved the controllability of the polymerization reactions in terms of molecular weight control. The ratio of ligand to metal influenced the controllability of ATRP system, and the optimum ratio was found to be 2:1. It was shown that ATRP of MMA with FeX₂/DPPMP catalytic system (X = Cl, Br) initiated by 2‐bromopropionitrile (BPN) was controlled more effectively in toluene than in polar solvents. The rate of polymerization increased with increasing the polymerization temperature and the apparent activation energy was calculated to be 56.7 KJ mol^?1. In addition, reverse ATRP of MMA was able to be successfully carried out using AIBN in toluene at 80 °C. Polymerization of styrene (St) was found to be controlled well by using the PEBr/FeBr₂/DPPMP system in DMF at 110 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2922–2935, 2008     

Experimental Design and Statistical Analysis of AGET ATRP of MMA in Emulsion Polymer Reactor

This study investigates atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) using activators generated by electron transfer (AGET) as the initiation technique in an emulsion well‐mixed 2L stirred tank reactor. The performance of the AGET ATRP of MMA is analyzed for five key independent variables, namely temperature, catalyst complex (CuBr2/dNbpy), initiator (EBiB), reducing agent (ascorbic acid), and surfactant (Brij 98). The reaction is carried out based on a two‐step polymerization procedure. A resolution 5 fractional factorial design technique is employed to assess the influence of the five independent variables on the monomer conversion, polymer average molecular weights, and polydispersity index (PDI). An input–output model is constructed from the data of 21 designed experimental tests. A statistical analysis of the results shows that the temperature is the most influential variable for the three output process responses. The initiator strongly affects the poly(methyl methacrylate) (PMMA) molecular weights. It is the least important key variable affecting MMA conversion and PDI, and the surfactant is the least one affecting PMMA Mn. On assessing the independent interactions effect, the interactions of temperature‐surfactant on conversion, and temperature‐initiator for PMMA M_n are considered. Process simulation in 3D mapping has demonstrated that model predictions agree well with experimental data.     

Triphenylphosphine as reducing agent for copper(II)-catalyzed AGET ATRP

Triphenylphosphine(TPP) was used as reducing agent to continuously generate the Cu(I) activator in copper(II)-catalyzed activators generated by electron transfer atom transfer radical polymerization(AGET ATRP). For example, the polymers prepared with a molar ratio of [MMA]0/[EBi B]0/[Cu Cl2]0/[PMDETA]0/[TPP]0 = 500/1/0.1/0.5/0.5 had controlled molecular weights and low molecular weight distribution(Mw/Mn) values(~1.2). TPP as a commercial reducing agent provides a convenient copper-catalyzed AGET ATRP procedure for the preparation of well-defined polymers.     

Rate‐enhanced ATRP in the presence of catalytic amounts of base: An example of iron‐mediated AGET ATRP of MMA

The catalytic amount of inorganic bases (i.e., NaOH, Na₃PO₄, NaHCO₃, and Na₂CO₃) and organic bases such as pyridine and triethylamine was used as the additives in an iron‐mediated atom transfer radical polymerization with activators generated by electron transfer (AGET ATRP) of a polar monomer methyl methacrylate (MMA) using FeCl₃·6H₂O as the catalyst, ethyl 2‐bromoisobutyrate (EBiB) as the initiator, ascorbic acid (AsAc) as the reducing agent, and tetrabutylammonium bromide (TBABr) as the ligand. All these bases can result in dual enhancement of polymerization rate and controllability over molecular weight while keeping low M_w/M_n values (<1.3) for the resultant polymers. For example, the polymerization rate of AGET ATRP with a molar ratio of [MMA]₀/[EBiB]₀/[FeCl₃·6H₂O]₀/[TBABr]₀/[AsAc]₀/[NaOH]₀ = 500/1/1/2/2/1.5 using NaOH as the additives was more than two times of that without NaOH. The nature of “living”/controlled free radical polymerization in the presence of base was confirmed by chain‐extension experiments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Iron‐mediated AGET ATRP of methyl methacrylate using metal wire as reducing agent

Methyl methacrylate (MMA) were successfully polymerized by atom transfer radical polymerization with activator generated by electron transfer (AGET ATRP) using copper or iron wire as the reducing agent at 90°C. Well‐controlled polymerizations were demonstrated using an oxidatively stable iron(III) chloride hexahydrate (FeCl₃·6H₂O) as the catalyst, ethyl 2‐bromoisobutyrate (EBiB) as the initiator, and tetrabutylammonium bromide (TBABr) or triphenylphosphine as the ligand. The polymerization rate was fast and affected by the amount of catalyst and type of reducing agents. For example, the polymerization rate of bulk AGET ATRP with a molar ratio of [MMA]₀/[EBiB]₀/[FeCl₃·6H₂O]₀/[TBABr]₀ = 500/1/0.5/1 using iron wire (the conversion reaches up to 82.2% after 80 min) as the reducing agent was faster than that using copper wire (the conversion reaches up to 86.1% after 3 h). At the same time, the experimental M_n values of the obtained poly(methyl methacrylate) were consistent with the corresponding theoretical ones, and the M_w/M_n values were narrow (～1.3), showing the typical features of “living”/controlled radical polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

AGET ATRP of acrylonitrile using 1,1,4,7,10,10‐hexamethyltriethylenetetramine as both ligand and reducing agent

Atom transfer radical polymerization using activators generated by electron transfer (AGET ATRP) of acrylonitrile (AN) initiated by ethyl 2‐bromoisobutyrate was approached for the first time using 1,1,4,7,10,10‐hexamethyltriethylenetetramine (HMTETA) and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as both ligand and reducing agent. AGET ATRP of AN with HMTETA as both ligand and reducing agent was better controlled than with PMDETA as both ligand and reducing agent under the same experimental conditions. With an increase content of HMTETA, the polymerization provided an accelerated reaction rate and a broader polymer molecular weight distribution. The rate of polymerization with DMF as solvent was faster than with acetonitrile, cyclohexanone, toluene, and xylene as solvents. The polymerization apparent activation energy was calculated to be 45.7 kJ mol^?1. The end functionality of polyacrylonitrile (PAN) was confirmed by ¹H NMR spectroscopy. The living feature of PAN was verified by chain extensions of PAN with methyl methacrylate and AN. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 128–133, 2010     

原子转移自由基细乳液聚合*

本文从正向、反向、同时正向/反向、电子转移活化剂等不同原子转移自由基聚合（ATRP）细乳液引发体系的角度,综述了近年来国内外关于ATRP细乳液聚合的研究进展。在细乳液体系中进行正向ATRP,聚合可控性不理想,反向ATRP相对适合于细乳液体系,其缺点是表面活性剂用量较大。同时正向/反向引发体系的ATRP中催化剂用量大为减少,并且聚合具有良好的可控性;电子转移活化剂（AGET）ATRP是通过电子转移反应来还原过渡金属的氧化态,克服了同时正向/反向ATRP中需要引入自由基引发剂的缺点。     

N,N-二乙基硫代氨基甲酰硫基团(S_2CNEt_2)为假卤原子转移的原子转移自由基聚合新体系

综述了原子转移自由基聚合 (ATRP)中 ,以N ,N 二乙基硫代氨基甲酰硫基团 (S2 CNEt2 )转移实现活性聚合、控制聚合物结构的 4种新方法 :非卤化物 ,N ,N 二乙基二硫代氨基甲酸亚铜 [Cu(S2 CNEt2 ) ]催化甲基丙烯酸甲酯 (MMA)的正向ATRP ;2 ,2′ 联吡啶存在的条件下 ,过氧化苯甲酰 (BPO)与Cu(S2 CNEt2 )的氧化还原反应控制MMA的本体反向ATRP;同时含可转移卤原子、基团的氯化二乙基二硫代氨基甲酸铜 [Cu(S2 CNEt2 ) Cl]成功地用于偶氮二异丁腈或BPO引发的乙烯类单体反向ATRP.假卤原子S2 CNEt2 转移的ATRP得到窄分布的精确结构聚合物分子链ω 端含有光敏基团S2 CNEt2 ,可引发乙烯类单体的常温光聚合 ,实现ATRP与光聚合相结合制备嵌段共聚物     

Synthesis of poly(methyl methacrylate) via ARGET ATRP and study of the effect of solvents and temperatures on its polymerization kinetics

This investigation reports the synthesis of poly(methyl methacrylate) via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and studies the effect of solvents and temperature on its polymerization kinetics. ARGET ATRP of methyl methacrylate (MMA) was carried out in different solvents and at different temperatures using CuBr₂ as catalyst in combination with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a ligand. Methyl 2‐chloro propionate was used as ATRP initiator and ascorbic acid was used as a reducing agent in the ARGET ATRP of MMA. The conversion was measured gravimetrically. The semilogarithmic plot of monomer conversion versus time was found to be linear, indicating that the polymerization follows first‐order kinetics. The linear polymerization kinetic plot also indicates the controlled nature of the polymerization. N,N‐Dimethylformamide (DMF), tetrahydrofuran (THF), toluene, and methyl ethyl ketone were used as solvents to study the effect on the polymerization kinetics. The effect of temperature on the kinetics of the polymerization was also studied at various temperatures. It has been observed that polymerization followed first‐order kinetics in every case. The rate of polymerization was found to be highest (k_app = 6.94 × 10⁻³ min⁻¹) at a fixed temperature when DMF was used as solvent. Activation energies for ARGET ATRP of MMA were also calculated using the Arrhenius equation.     

碱性离子液体催化金属调节的甲基丙烯酸甲酯的电子转移活化原子转移自由基聚合

通过电子转移活化原子转移自由基聚合（AGET ATRP）,以2-溴代异丁酸乙酯（EBiB）为引发剂、维生素C（VC）为还原剂。 以碱性离子液体1-丁基-3-甲基咪唑氢氧化盐([Bmim][OH])分别和FeCl3·6H2O、CuCl2及RuCl3形成的配合物为催化剂催化甲基丙烯酸甲酯（MMA）的本体和溶液聚合。 催化量的[Bmim][OH]即可提高聚合速率,并且得到相对分子质量分布可控的PMMA（Mw/Mn为1.20～1.40）。 研究了[Bmim][OH]的加入量对聚合速率和相对分子质量分布的影响,3种催化体系催化性质通过循环伏安曲线表征。 扩链反应证明了碱性离子液体催化甲基丙烯酸甲酯的聚合为“活性”/可控自由基聚合。 碱性离子液体良好的溶解性使其成为活性自由基聚合的良好催化剂。     

Synthesis of poly(β‐pinene)‐g‐poly(meth)acrylate by the combination of living cationic polymerization and atom transfer radical polymerization

New graft copolymers of β‐pinene with methyl methacrylate (MMA) or butyl acrylate (BA) were synthesized by the combination of living cationic polymerization and atom transfer radical polymerization (ATRP). β‐Pinene polymers with predetermined molecular weights and narrow molecular weight distributions (MWDs) were prepared by living cationic polymerization with the 1‐phenylethyl chloride/TiCl₄/Ti(OiPr)₄/nBu₄NCl initiating system, and the resultant polymers were brominated quantitatively by N‐bromosuccinamide in the presence of azobisisobutyronitrile, yielding poly(β‐pinene) macroinitiators with different bromine contents (Br/β‐pinene unit molar ratio = 1.0 and 0.5 for macroinitiators a and b , respectively). The macroinitiators, in conjunction with CuBr and 2,2′‐bipyridine, were used to initiate ATRP of BA or MMA. With macroinitiator a or b , the bulk polymerization of BA induced a linear first‐order kinetic plot and gave graft copolymers with controlled molecular weights and MWDs; this indicated the living nature of these polymerizations. The bulk polymerization of MMA initiated with macroinitiator a was completed instantaneously and induced insoluble gel products. However, the controlled polymerization of MMA was achieved with macroinitiator b in toluene and resulted in the desired graft copolymers with controlled molecular weights and MWDs. The structures of the obtained graft copolymers of β‐pinene with (methyl)methacrylate were confirmed by ¹H NMR spectra. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1237–1242, 2003     

A new tetradentate ligand for atom transfer radical polymerization

The properties of a ligand, including molecular structure and substituents, strongly affect the catalyst activity and control of the polymerization in atom transfer radical polymerization (ATRP). A new tetradentate ligand, N,N′‐bis(pyridin‐2‐ylmethyl‐3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED) was synthesized and examined as the ligand of copper halide for ATRP of styrene (St), methyl acrylate (MA), and methyl methacrylate (MMA), and compared with other analogous linear tetrdendate ligands. The BPED ligand was found to significantly promote the activation reaction: the CuBr/BPED complex reacted with the initiators so fast that a large amount of Cu(II)Br₂/BPED was produced and thus the polymerizations were slow for all the monomers. The reaction of CuCl/BPED with the initiator was also fast, but by reducing the catalyst concentration or adding CuCl₂, the activation reaction could be slowed to establish the equilibrium of ATRP for a well‐controlled living polymerization of MA. CuCl/BPED was found very active for the polymerization of MA. For example, 10 mol% of the catalyst relatively to the initiator was sufficient to mediate a living polymerization of MA. The CuCl/BPED, however, could not catalyze a living polymerization of MMA because the resulting CuCl₂/BPED could not deactivate the growing radicals. The effects of the ligand structures on the catalysis of ATRP are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3553–3562, 2004     

Basic ionic liquid/FeCl3·6H2O as an efficient catalyst for AGET ATRP of methyl methacrylate

A basic ionic liquid, 1‐butyl‐3‐methyl imidazolium hydroxide ([Bmim]OH), was synthesized and used as the additives in an iron‐mediated atom transfer radical polymerization with activators generated by electron transfer (AGET ATRP) of methyl methacrylate in bulk and solution, using FeCl₃ · 6H₂O as the catalyst, ethyl 2‐bromoisobutyrate as the initiator, vitamin C (Vc) as the reducing agent, and tetrabutylammonium bromide or tetra‐n‐butylphosphonium bromide as the ligand. Catalytic amount of [Bmim]OH could enhance the polymerization rate and produce poly(methyl methacrylate) with controllable molecular weights and narrow molecular weight distributions (M_w/M_n = 1.3–1.4). The nature of controlled/“living” free radical polymerization in the presence of basic ionic liquid was further confirmed by chain‐extension experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Atom transfer radical polymerization of vinyl monomers in the presence of tetraethylthiuram disulfide

In situ ATRPs of MMA, St in the presence of TD catalyzed by FeCl₃/PPh₃ and CuBr₂/bpy have been studied, respectively. The results showed that the initiator Et₂NCS₂X (X = Cl or Br) and catalyst FeCl₂ or CuBr were formed in situ from the initiating components and the polymerization exhibited living radical polymerization characteristics. In the case of St polymerization with TD/CuBr/bpy initiating system, an inverse ATRP was observed.     

ATRP of methyl methacrylate initiated with a bifunctional initiator bearing bromomethyl functional groups: Synthesis of the block and graft copolymers

This article reports the synthesis of the block and graft copolymers using peroxygen‐containing poly(methyl methacrylate) (poly‐MMA) as a macroinitiator that was prepared from the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in the presence of bis(4,4′‐bromomethyl benzoyl peroxide) (BBP). The effects of reaction temperatures on the ATRP system were studied in detail. Kinetic studies were carried out to investigate controlled ATRP for BBP/CuBr/bpy initiating system with MMA at 40 °C and free radical polymerization of styrene (S) at 80 °C. The plots of ln ([M_o]/[M_t]) versus reaction time are linear, corresponding to first‐order kinetics. Poly‐MMA initiators were used in the bulk polymerization of S to obtain poly (MMA‐b‐S) block copolymers. Poly‐MMA initiators containing undecomposed peroygen groups were used for the graft copolymerization of polybutadiene (PBd) and natural rubber (RSS‐3) to obtain crosslinked poly (MMA‐g‐PBd) and poly(MMA‐g‐RSS‐3) graft copolymers. Swelling ratio values (q_v) of the graft copolymers in CHCl₃ were calculated. The characterizations of the polymers were achieved by Fourier‐transform infrared spectroscopy (FTIR), ¹H‐nuclear magnetic resonance (¹H NMR), gel‐permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), and the fractional precipitation (γ) techniques. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1364–1373, 2010     

Synthesis of Amphiphilic Azobenzene Functionalized Branched-Type Copolymer Based on Branched Poly(2-(Dimethylamino) ethyl methacrylate) and Investigation of Its Drug Release Properties

Here, we reported the synthesis of branched poly(2-(dimethylamino) ethyl methacrylate) (PDMAEMA) via a combination of activator generated by electron transfer atom transfer radical polymerization (AGET ATRP) and self-condensing vinyl polymerization (SCVP) techniques. The typical linear kinetics of the AGET ATRP of DMAEMA with the initiation of 2-(2-bromoisobutyryloxy) ethyl methacrylate (BIEM) was observed. The molecular weight (M_n ) of the branched PDMAEMA increased with the monomer conversion. The GPC traces of these polymers were unimodal and the molecular weight distributions (M_w/M_n ) were in the range of 1.30–2.10. The degree of branching (DB) determined by NMR spectra agreed with theoretical value. The branched amphiphilic copolymer functionalized with azobenzene was then prepared via AGET ATRP chain-extension of branched PDMAEMA with azobenzene monomer, 6-[4-(4-methoxyphenylazo)phenoxy]hexyl(meth)acrylate as the second monomer. The GPC traces of these branched copolymers showed the mono-peaks, which proved the successful preparation of copolymers. The properties of this branched copolymer in controlling drug release were also investigated. It was found that the drug release rate of chlorambucil can be controlled by various factors, such as polymer structure, light, temperature and pH values.     

Synthesis and characterization of a new fluorinated macroinitiator and its diblock copolymer by AGET ATRP

A new fluorinated macroinitiator of poly 2,2,3,4,4,4-hexafluorobutyl methacrylate-Br (PHFMA-Br) was prepared via activator generated by electron transfer atom transfer radical polymerization (AGET ATRP), and then a series of fluorinated block copolymers with different fluorine content were successfully synthesized from the macroinitiator by the second step AGET ATRP. GPC, FTIR and ¹H NMR data obtained verified the synthesis. Contact angle measurement indicated that proper fluorine content could decrease the surface energy and increase the contact angle of the copolymer films. XPS characterization showed that the large difference in surface energy between the block and random copolymer film resulted from the difference of the fluorine content on the surface, although the fluorine content of the two copolymers in bulk was similar. The self-assembly behavior of the fluorinated block copolymer in selective solvents was evaluated by the TEM study, and the stable micelles with a core-shell structure were observed when the copolymer content was about 1 wt%.