Direct 2-Arylation of Thiophene Using Low Loading of a Phosphine-Free Palladium Catalyst

The direct coupling of aryl halides with thiophene would be a considerable advantage for sustainable development because of only HBr associated with a base as by-product is formed and the number of steps to prepare these compounds is less than in more classical coupling reactions. We observed that through the use of only 0.2 mol% Pd(OAc)₂ as the catalyst, a range of aryl bromides undergoes coupling via a C-H bond activation/functionalization reaction with thiophene to give 2-arylated thiophenes in good yields. In most cases, only traces of polyarylated thiophenes were detected when a large excess of thiophene was employed. This air-stable catalyst can be used with a wide variety of aryl bromides.      

A practical synthesis of highly functionalized aryl nitriles through cyanation of aryl bromides employing heterogeneous Pd/C: in quest of an industrially viable process

Preparation of aryl nitrile 2a through classical Rosenmund-von Braun reaction of aryl bromide 1a resulted in a poor yield (61%) due to a high reaction temperature (165 °C) and a lack of efficient procedure for separating 2a from a large quantity of heavy metal waste (Cu salts). To address these issues, a practical synthesis of multifunctional aryl nitriles through cyanation of aryl bromides has been developed with heterogeneous Pd/C used as the catalyst. Treatment of aryl bromides 1 with Zn(CN)₂ in the presence of Pd/C, Zn, ZnBr₂ and PPh₃ in DMA provided aryl nitriles 2 involving those carrying sterically demanding electron-rich substituent in good yields and in highly reproducible manner. The activity of Pd/C is highly dependent on the properties of the Pd/C. Oxidic thickshell type catalyst Pd/C D5 was found to furnish the highest rate acceleration and yield. The use of heterogeneous Pd/C might anchor and disperse Pd over the solid support of the catalyst, at least in the initial stage of the reaction, to assure the formation of monomeric Pd complex without precipitating to inactive Pd black. The use of a slightly excess of Zn(CN)₂ (0.6 equiv) and air oxidation of phosphine ligand, after end of the reaction, converted Pd species to insoluble phosphine-free Pd cyanides, from which Pd was recovered in high yield through simple filtration followed by usual recovery process involving combustion.     

Palladium/tetraphosphine catalyzed suzuki cross‐coupling of heteroarylboronic acids with aryl halides

cis,cis,cis‐1,2,3,4‐Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyses the Suzuki reaction of heteroarylboronic acids with aryl bromides and also the coupling of arylboronic acids with heteroaryl bromides. The coupling of thiophene‐ or benzothiopheneboronic acids, furan‐ or benzofuranboronic acids and 3‐pyridineboronic acid with a variety of aryl bromides gave the corresponding coupling products in good yields. However, in most cases, better results in terms of ratio substrate/catalyst were obtained for the reverse reaction using heteroaryl bromides with arylboronic acids.     

Synthesis of (E)-alkenes via hydroindation of CC in InCl3-NaBH4 system

In InCl₃-NaBH₄-MeCN system, terminal aryl alkynes could couple with aryl iodides and bromides to give disubstituted alkenes via hydroindation of CC. In the similar way, (E)-alkenylsilanes were synthesized via reduction of alkynylsilanes in tetrahydrofuran (THF) in high yields. The processes showed high regio- and stereoselectivity.     

Direct Introduction of a Dimesitylboryl Group Using Base‐Mediated Substitution of Aryl Halides with Silyldimesitylborane

The first dimesitylboryl substitution of aryl halides with a silylborane bearing a dimesitylboryl group in the presence of alkali‐metal alkoxides is described. The reactions of aryl bromides or iodides with Ph₂MeSi?BMes₂ and Na(OtBu) afforded the desired aryl dimesitylboranes in good to high yields and with high borylation/silylation ratios. Selective reaction of the sterically less‐hindered C?Br bond of dibromoarenes provided monoborylated products. This reaction was used to rapidly construct a D‐π‐A aryl dimesityl borane with a non‐symmetrical biphenyl spacer.     

Cyclopalladated ferrocenylimines: efficient catalysts for homocoupling and Sonogashira reaction of terminal alkynes

A novel pathway for homocoupling of terminal alkynes has been described using cyclopalladated ferrocenylimine 1 or 2/CuI as catalyst in the air. This catalytic system could tolerate several functional groups. The palladacycle 2 in the presence of n-Bu₄NBr as an additive could be applied to Sonogashira cross-coupling reaction of aryl iodides, aryl bromides, and some activated aryl chlorides with terminal alkynes under amine- and copper-free conditions, mostly to give moderate to excellent yields.     

Efficient synthesis of fluorinated biphenyl derivatives via Pd-catalyzed Suzuki coupling reactions in aqueous solvents at room temperature

A variety of fluorinated biphenyl derivatives were obtained in good yields in aqueous solvents at room temperature by Suzuki coupling reaction of aryl bromides and aryl boronic acid in the presence of high activity catalyst—some air-stable hemilabile PO coordinated cyclopalladated complexes. The structures of above catalysts were characterized by element analyses, IR, ¹H NMR, ¹³C NMR and ³¹P NMR.     

Synthesis of cobalt-containing monodentate phosphine ligand and application toward Suzuki cross-coupling reactions

A bulky, dicobalt complexed, mono-dentate phosphine, [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄](μ,η-PhCCPCy₂) (4), was prepared from the reactions of the bis(diphenylphosphino)methylene (dppm)-bridged dicobalt complex Co₂(CO)₆(μ-Ph₂PCH₂PPh₂) (2) with PhCCPCy₂ (3). Combination of 4 and Pd(OAc)₂ (1:1) gave an active catalyst for the palladium-catalyzed Suzuki coupling of aryl bromides with phenylboronic acid; the catalytic reactions can be performed even under low catalyst loadings (0.1-0.001 mol% 4/Pd(OAc)₂). Compound 4 has been proved to be an authentic and effective mono-dentate phosphine ligand. Crucial factors such as 4/Pd(OAc)₂ ratio, base being used, solvent volume, temperature, and electronic variation of the aryl bromides in reactions were also investigated and results are reported.     

Synthesis and applications of a new palladacycle as a high active catalyst in the Suzuki couplings

The reaction of biphenyl-based phosphine P(o-C₆H₄Me)Ph₂ (1) with Pd(OAc)₂ in toluene affords the air and water stable palladacycle (2) as a binuclear compound which has been characterized by multi-nuclear NMR spectroscopy and elemental analysis as a mixture of cis and trans isomers with relative intensity of 1:3, respectively. This palladacycle is a highly efficient catalyst precursor for the coupling of aryl boronic acids and aryl halides. Both activated and deactivated aryl bromides and chlorides are efficiently coupled in the presence of 2 to furnish the corresponding cross-coupled products in excellent yields, and a wide variety of functional groups are tolerated in aryl halides. This methodology has also been extended for the coupling of bromoarylphosphines and bromoarylphosphine oxides with aryl boronic acids for the generation of hindered corresponding products.     

An inexpensive and highly stable ligand 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)piperazine for Mizoroki-Heck and room temperature Suzuki-Miyaura cross-coupling reactions

A bulky, inexpensive and simple bidentate ligand 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)piperazine (1) has been synthesized and characterized. The palladium catalyst was formed by combination of 1 with [Cl₂Pd(COD)] in a ratio of 1:1, tested in the Suzuki-Miyaura and Mizoroki-Heck cross-coupling reactions. Coupling of a variety of aryl bromides with phenylboronic acid using methanol as solvent at room temperature, or at 60 °C, gave generally high yields of coupled products. Coupling of aryl chlorides with organoboron reagent at 110 °C in DMF afforded good yields of biaryls under aerobic conditions. This non-phosphorus, air and moisture stable catalyst also displays good activity for Mizoroki-Heck coupling reaction in methanol at 60 °C with various aryl chlorides and bromides.     

Palladium-catalyzed benzylic C(sp3)–H carbonylative arylation of azaarylmethyl amines with aryl bromides

A highly selective palladium-catalyzed carbonylative arylation of weakly acidic benzylic C(sp³)–H bonds of azaarylmethylamines with aryl bromides under 1 atm of CO gas has been achieved. This work represents the first examples of use of such weakly acidic pronucleophiles in this class of transformations. In the presence of a NIXANTPHOS-based palladium catalyst, this one-pot cascade process allows a range of azaarylmethylamines containing pyridyl, quinolinyl and pyrimidyl moieties and acyclic and cyclic amines to undergo efficient reactions with aryl bromides and CO to provide α-amino aryl-azaarylmethyl ketones in moderate to high yields with a broad substrate scope and good tolerance of functional groups. This reaction proceeds via in situ reversible deprotonation of the benzylic C–H bonds to give the active carbanions, thereby avoiding prefunctionalized organometallic reagents and generation of additional waste. Importantly, the operational simplicity, scalability and diversity of the products highlight the potential applicability of this protocol.

Introduced is a method for the deprotonative carbonylation of azaarylmethyl amines with aryl bromides. The reaction employs a Pd(NIXANTPHOS)-based catalyst and takes place under 1 atm CO.     

Catalytic activity of Pd(II) and Pd(II)/DAB-R systems for the Heck arylation of olefins

Palladium-catalyzed reactions of aryl bromides with various olefins involving Pd(II)/diazabutadiene (DAB-R) systems have been investigated. The scope of a coupling process using Pd(II) sources and an α-diimine as ligand in the presence of Cs₂CO₃ as base was tested using various substrates. The Pd(OAc)₂/DAB-Cy (1, DAB-Cy=1,4-dicyclohexyl-diazabutadiene) system presents the highest activity with respect to electron-neutral and electron-deficient aryl bromides in coupling with electron rich olefins. The synthesis and X-ray characterization of a Pd(II)-diazabutadiene ligand is reported. Extensive optimization experiments showed that another Pd(II) source, Pd(acac)₂ (acac=acetylacetonate), proved to activate aryl bromides at high temperatures, low catalyst loadings when the appropriate concentration of ⁿBu₄NBr additive was employed. The effect of the DAB-Cy ligand is important at very low catalyst loadings and high temperatures. Pd(acac)₂ and Pd(acac)₂/DAB-Cy precatalysts were very effective for the arylation of various olefins with aryl bromides with respect to reaction rate, catalyst loadings, and functional group tolerance.     

Copper‐Catalyzed Direct C Arylation of Heterocycles with Aryl Bromides: Discovery of Fluorescent Core Frameworks

A window of opportunity : A general copper‐catalyzed C? H bond‐activation path allows arylation of heterocycles with a wide range of aryl bromides (see scheme). The reaction shows excellent regioselectivity and exhibits good functional group tolerance. The 8‐aryl xanthines exhibit fluorescence in a variety of solvents and show promise as reagents for biological imaging.

     

1,2,3-Triazol-5-ylidene-palladium complex catalyzed Mizoroki-Heck and Sonogashira coupling reactions

The bis-1,4-dimesityl-1,2,3-triazol-5-ylidene-palladium complex (1a) successfully catalyzes the Mizoroki-Heck and Sonogashira coupling reactions with aryl bromides to give the corresponding alkenes and alkynes, respectively, in good to excellent yields. In the Mizoroki-Heck reaction, electron-rich, electron-poor, and functionalized aryl bromides and alkenes are tolerated, while the substrates are limited to electron-poor aryl halides in the Sonogashira coupling reaction. The palladium complex also catalyzes cross-coupling reactions with aryl chlorides to give higher yields of products than does the bis-IMes-Pd complex analogue (2), under specific conditions.     

An improved,efficient route to 2,2-difluoroethenylbenzenes

Treatment of vinylidene fluoride with tert-BuLi at ?115 °C gave a solution of [F₂CCHLi]. Addition of Bu₃SnCl to this lithium reagent at ?110 °C gave an 88% isolated yield of F₂CCHSnBu₃. Reaction of F₂CCHSnBu₃ with substituted aryl iodides under Stille-Liebeskind conditions [Pd(PPh₃)₄/Cu(I)I] at room temperature afforded the 2,2-difluoroethenylbenzines in good yield. In the absence of the Cu(I)I co-catalyst, no reaction occurred. This work provides the most efficient route for the conversion of aryl halides to 2,2-difluorostyrenes.     

[RuCl3(H2O)n]-catalyzed direct arylations

Catalytic amounts of economically attractive [RuCl₃(H₂O)_n] allow for direct arylations via C-H bond functionalization with aryl bromides under phosphine ligand-free reaction conditions. Thereby, a variety of functionalized (hetero)aryl bromides, bearing either electron-withdrawing or electron-releasing substituents, can be employed for direct arylations of pyridine, oxazoline, pyrazole, or ketimine derivatives as pronucleophiles.     

N,N,N′,N′-Tetrakis(2-hydroxyethyl)ethylenediamine palladium(II) complex as efficient catalyst for the Suzuki/Miyaura reaction in water

A new water soluble palladium(II) complex (2) derived from N,N,N′,N′-tetrakis(2-hydroxyethyl)ethylenediamine (edteH₄) (1) was synthesized in high yield and characterized by ¹H, ¹³C, HMQC and COSY NMR spectroscopy. X-ray diffraction studies on a single crystal of 2 confirmed the cis square planar geometry; the edteH₄ ligand (1) is κ² (N,N)-coordinated with four pendant CH₂CH₂OH groups. This new complex [PdCl₂(edteH₄)] (2) and the previously synthesized triethanolamine complex [Pd(OCH₂CH₂N(CH₂CH₂OH)₂)₂] (3) were tested as catalysts for the Suzuki/Miyaura cross-coupling reaction of various aryl bromides with phenylboronic acid in water. Electronically activated aryl bromides, such as 4-bromoacetophenone and 4-bromobenzaldehyde undergo the cross-coupling with extremely high turnover numbers (TON) of up to 1,00,000 without organic solvent.     

Efficient preparation of 2-azulenylboronate and Miyaura-Suzuki cross-coupling reaction with aryl bromides for easy access to poly(2-azulenyl)benzenes

This paper describes an efficient preparation of 2-azulenylboronate (6) starting from 2-iodoazulene by halogen-metal exchange reaction using n-BuLi and subsequent quenching with 2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane. The boronate 6 has been found to undergo Pd-catalyzed Miyaura-Suzuki cross-coupling reaction with a range of aryl bromides including aromatic poly bromides utilizing Pd₂(dba)₃-P(t-Bu)₃ as a catalyst and establishes a strategy to produce novel poly(2-azulenyl)benzenes, some of which are found to be insoluble in common organic solvents, however. The redox behavior of 2-arylazulenes and poly(2-azulenyl)benzenes was examined by cyclic voltammetry (CV) and compared with those of 6-azulenylbenzene derivatives reported previously.     

Suzuki cross-coupling in aqueous media catalyzed by a 1,1-N-substituted ferrocenediyl Pd(II) complex

Reaction of PdCl₂(MeCN)₂ with Fe[η-C₅H₄NC(H)Ph-N]₂ (1) at MeOH at r.t. gives air-stable PdCl₂Fe[η-C₅H₄NC(H)Ph-N]₂ (2; yield 84%). X-ray single-crystal diffraction analyses show that 2 is a Pd(II) square planar complex with N,N^′ chelation of the ferrocenediyl ligand, without Fe-Pd bond. It effectively catalyzes Suzuki cross-coupling reactions of aryl iodides and bromides with aryl boronic acids in aqueous media under non-homogeneous conditions in which the products can be easily isolated. The reaction conditions including choice of base, catalytic load and catalyst recoverability have been investigated and reported.