Aminoxy-linked rhodamine hydroxamate as fluorescent chemosensor for Fe in aqueous media

A novel feric ion-selective rhodamine-based fluorescent chemosensor, which contains a bis-aminoxy chain moiety, has been developed. The multi-dentate binding site of rhodamine fluorophore shows selective detection of ferric iron over other biologically important metal ions in aqueous media and also shows 1:1 binding stoichiometry.     

A new Fe fluorescent chemosensor based on aggregation-induced emission

A new tetraphenylethylene (TPE)-based sensor M1 bearing double 2-methylpyridyl-2-methylthiophenylamino units linked with triazole moieties was reported. Both UV–vis and fluorescence spectroscopic studies demonstrated that M1 was highly sensitive and selective toward Fe³⁺ over other metal ions in THF/H₂O solution based on the aggregation-induced emission quenching mechanism. The lowest detection limit of M1 for Fe³⁺ is 0.7 μM. The detailed fluorescent titration study suggested that the binding stoichiometry of the M1–Fe³⁺ complex was 1:2, and the structure between M1 and the Fe³⁺ complex was confirmed by the ¹H NMR titration.     

Effectively selective fluorescent chemosensor for terephthalate

A novel fluorescent calix[8]arene-like chemosensor 1 was designed and synthesized for effectively selective recognition of terephthalate. The receptor enclosed and acted on the special guest by synergistic effects of cavity size, π-π stacking and hydrogen bonding interaction.     

A fluorescent chemosensor for wide-range pH detection

Simple polyamines, L1-L3, bearing anthracene and benzophenone units at the respective ends, behave as a fluorescent pH sensor applicable to wide-range pH detection.     

Dipodal fluorescent chemosensor for Cu and resultant complex as a chemosensor for iodide

A dipodal receptor was synthesized by condensation of isophthalaldehyde and p-toluenesulfonylhydrazide. The receptor was found to be selective for Cu²⁺ recognition in CH₃CN. The resultant Cu²⁺ receptor complex selectively recognized iodide through cation displacement assay in a CH₃CN/H₂O (8:2, v/v) solvent system.     

A ratiometric fluorescent chemosensor for iron: discrimination of Fe2+ and Fe3+ and living cell application

A newly designed probe, 6-thiophen-2-yl-5,6-dihydrobenzo[4,5]imidazo-[1,2-c] quinazoline (HL(1)) behaves as a highly selective ratiometric fluorescent sensor for Fe(2+) at pH 4.0-5.0 and Fe(3+) at pH 6.5-8.0 in acetonitrile-HEPES buffer (1/4) (v/v) medium. A decrease in fluorescence at 412 nm and increase in fluorescence at 472 nm with an isoemissive point at 436 nm with the addition of Fe(2+) salt solution is due to the formation of mononuclear Fe(2+) complex [Fe(II)(HL)(ClO(4))(2)(CH(3)CN)(2)] (1) in acetonitrile-HEPES buffer (100 mM, 1/4, v/v) at pH 4.5 and a decrease in fluorescence at 412 nm and increase in fluorescence at 482 nm with an isoemissive point at 445 nm during titration by Fe(3+) salt due to the formation of binary Fe(3+) complex, [Fe(III)(L)(2)(ClO(4))(H(2)O)] (2) with co-solvent at biological pH 7.4 have been established. Binding constants (K(a)) in the solution state were calculated to be 3.88 × 10(5) M(-1) for Fe(2+) and 0.21 × 10(3) M(-1/2) for Fe(3+) and ratiometric detection limits for Fe(2+) and Fe(3+) were found to be 2.0 μM and 3.5 μM, respectively. The probe is a "naked eye" chemosensor for two states of iron. Theoretical calculations were studied to establish the configurations of probe-iron complexes. The sensor is efficient for detecting Fe(3+)in vitro by developing a good image of the biological organelles.     

A new selective phenanthroline-based fluorescent chemosensor for Co

An intramolecular charge transfer (ICT) chromophore 2-(2-pyridine)imidazo [4,5,f]-1,10-phenanthroline (1) has been synthesized and firstly used as a chemosensor with a reversible, ‘on-off’ sensing capability for biologically and environmentally significant Co²⁺ in DMF under buffered conditions. The experiment results also show that the response behavior of 1 to Co²⁺ is pH independent in range of pH 3.0-7.0 and show excellent selectivity for Co²⁺ over other cations.     

General but discriminating fluorescent chemosensor for aliphatic amines

Aliphatic amines are sensitively and discriminatively detected through binding with demethylated naphthol AS-BI (7-bromo-3-hydroxy-2-naphth-o-hydroxyanilide, 2) and fluorescence of the resulting complex. Recognition of the amine by the chemosensor 2 occurs via proton transfer of the naphtholic proton to the amine and is facilitated by the presence of the phenol group. Amine basicity is the primary controller of detection. Poorly basic aromatic and conjugated amines such as pyridine and aniline are not detected. Hydrogen bonding within the complex allows further differentiation of aliphatic amines. Doubly primary, conformationally flexible diamines are the most sensitive to detection, followed by secondary amines.     

A squaraine-based near IR fluorescent chemosensor for Calcium

A red to NIR emitting, highly Ca²⁺-specific fluorescent chemosensor has been synthesized. In pH 7.2 aqueous buffers, the chemosensor signals Ca²⁺ by a decrease in emission intensity, whereas large excess of Mg²⁺ ions have no effect on either the absorption or the emission spectrum. The chemosensor is likely to be the prototype of a new generation of laser-diode excitable fluorescent chemosensors for Calcium.     

A highly selective fluorescent chemosensor for lead ions

A simple fluorescent chemosensor 1 exhibits a 40-fold fluorescence enhancement upon addition of lead ion and yet is insensitive to most of univalent and divalent metal ions. The high affinity of 1 toward Pb2+ presumably results from the cooperative binding behaviors of two potential metal binding sites: the dicarbonyl and the 15-monoazacrown-5 ether.     

A new fluorescent PET chemosensor for fluoride ions

A new anthracene derivative bearing two phenylurea group at the 1,8-position of anthracene shows a selective fluorescence quenching effect with fluoride ion via a PET mechanism.     

4,7-Diaryl indole-based fluorescent chemosensor for iodide ions

Simple and selective indole based fluorescent sensors for iodide anions are reported. A series of 4,7-diaryl indole derivatives (DAIs) are designed and synthesized using Suzuki coupling. These DAIs shows significant changes in UV-vis and fluorescent intensity only with addition of iodides and not with other anions. The ability of these DAIs to function as selective iodide chemosensor is reported.     

A highly selective fluorescent chemosensor for Fe (III) based on rhodamine 6G dyes derivative

A new fluorescent probe L based on the rhodamine 6G platforms for Fe³⁺ has been designed and synthesised. L showed excellent selectivity and high sensitivity for Fe³⁺ against other metal ions such as K⁺, Na⁺, Ag⁺, Cu²⁺, Co²⁺, Mg²⁺, Cd²⁺, Ni²⁺, Zn²⁺, Fe²⁺, Hg²⁺, Ce³⁺ and Y³⁺ in HEPES buffer (10 mM, pH 7.4)/CH₃CN (40:60, V/V). The distinct color change and the rapid emergence of fluorescence emission provided naked-eyes detection for Fe³⁺. The recognition mechanism of the probe toward Fe³⁺ was evaluated by Job’s plots, IR and ESI-MS. In order to further study their fluorescent properties, L + Fe³⁺ fluorescence lifetime was also measured. Moreover, the test strip results showed that these probes could act as a convenient and efficient Fe³⁺ test kit.     

A highly selective fluorescent chemosensor for Pb2+

A new fluorescent sensor based on rhodamine B for Pb2+ was synthesized. The new fluorescent sensor showed an extreme selectivity for Pb2+ over other metal ions examined in acetonitrile. Upon the addition of Pb2+, an overall emission change of 100-fold was observed, and the selectivity was calculated to be 200 times that of Zn2+. The signal transduction occurs via of reversible CHEF (chelation-enhanced fluorescence) with this inherent quenching metal ion.     

Anthracene-based macrocyclic fluorescent chemosensor for selective sensing of dicarboxylate

An anthracene-based macrocyclic receptor has been designed and synthesized for selective recognition of 1,4-phenylenediacetate (K_a = 3.34 × 10⁵ M^?1). The macrocycle binds 1,4-phenylenediacetate selectively at the charged sites of the receptor with a concomitant increase in fluorescence of anthracene. The interaction properties of the macrocycle were evaluated by ¹H NMR, UV–vis and fluorescence spectroscopic methods.     

Ratiometric fluorescent chemosensor for silver ion at physiological pH

Bis-pyrene derivative 1, bearing two pyrene and pyridine groups, was synthesized as a ratiometric fluorescent chemosensor for Ag(+) in aqueous solution. Fluorescent chemosensor 1 displayed a selective ratiometric change with Ag(+), which was attributed to the excimer-monomer emissions of pyrenes. A mechanism for the binding mode was proposed based on fluorescence changes, NMR experiments, and theoretical calculations.     

A pyrene-based dual chemosensor for colorimetric detection of Cu2+ and fluorescent detection of Fe3+

A pyrene based chemosensor was designed and synthesized. The pyrene fluorophore was connected with a pyridine unit through a Schiff base structure to give the sensor (L). L was tested with a variety of metal ions and exhibited high colorimetric selectivities for Cu²⁺ and Fe³⁺ over other ions. Upon binding with Cu²⁺ or Fe³⁺, L showed an obvious optical color change from colorless to pink for Cu²⁺ or orange for Fe³⁺ over a wide pH range from 3 to 12. Moreover, the fluorescence of L at 370 nm decreased sharply after bonding with Fe³⁺, while other metal ions including Cu²⁺ had no apparent interference. Thus, using such single chemosensor, Cu²⁺ and Fe³⁺ can be detected independently with high selectivity and sensitivity. The limits of detection toward Cu²⁺ and Fe³⁺ were 8.5 and 2.0 μM, respectively. DFT calculation results also proved the formation of stable coordination complexes and the phenomenon of fluorescence quenching by Fe³⁺. Furthermore, L was also successfully used as a bioimaging reagent for detection of Fe³⁺ in living cells.     

Dual-signaling fluorescent chemosensor based on bisthiazole derivatives

A new bisthiazole chemosensor (3) with phenolic substituents at the position 2 of the thiazole rings was prepared. The chemosensor 3 acts as a potential dual-function fluorescence chemosensor with Cu²⁺ and Zn²⁺ ions causing complete quenching and ratiometric change of fluorescence, respectively. The mechanism of fluorescence was based on the cation-induced inhibition of excited-state intramolecular proton transfer (ESIPT).