Ring opening of chiral 2-(1-aminoalkyl)epoxides by aliphatic thiols with total selectivity: synthesis of enantiopure 3-amino-1-(alkylthio)alkan-2-ols

We have studied the thiolysis of (2R,1′S)- or (2S,1′S)-2-(1-aminoalkyl)epoxides 1 or 2 in the presence of BF₃·OEt₂. The ring opening took place at C-3 with complete regioselectivity, affording the corresponding enantiopure (2R,3S)- or (2S,3S)-3-amino-1-(alkylthio)alkan-2-ols 3 or 4 in good or high yield. The structures of compounds 3 and 4 have been proposed based on HMBC NMR experiments.     

Asymmetric synthesis of (R)- and (S)-2-trifluoromethylepinephrine

An asymmetric synthesis of (R)- and (S)-2-trifluoromethylepinephrine (1R and 1S) is presented. Trifluoromethylation involves nucleophilic aromatic substitution of halobenzene 4 most likely via a copper mediated CF₃ anion equivalent generated in situ. The asymmetric step involves conversion of 3,4-dimethoxy-2-trifluoromethylbenzaldehyde (5) to silyl cyanohydrin (6R and 6S) using a chiral salen catalyst in the presence of titanium. 1R and 1S are potential alternatives to currently used vasoconstrictors in local anesthetic formulations.     

Synthesis, properties and complexation of (pS)-1-isocyano-2-methylferrocene, the first planar-chiral isocyanide ligand

Reaction of enantiomerically pure, planar-chiral (_pS)-1-bromo-2-methylferrocene (1) with phthalimide in the presence of Cu₂O produces (_pS)-1-phthalimido-2-methylferrocene (2), quantitative reduction of which with hydrazine hydrate affords (_pS)-1-amino-2-methylferrocene (3) with >99% ee. Formylation of amine 3 followed by dehydration of the resulting (_pS)-1-formamido-2-methylferrocene (4) provides (_pS)-1-isocyano-2-methylferrocene (5), the first example of a planar-chiral isocyanide ligand, in a good yield. Isocyanide 5 reacts with PdI₂ to give the crystallographically characterized chiral complex trans-[PdI₂{(_pS)-1-isocyano-2-methylferrocene}₂] (6). The redox behavior of 4, 5, and 6, accessed by cyclic voltammetry, is discussed.     

Synthesis of (2S,3R)- and (2S,3S)-[3-H1]-proline via highly stereoselective hydrolysis of a silyl enol ether

A straightforward synthesis of (2S)-[3,3-²H₂]-proline 1c and (2S,3R)- and (2S,3S)-[3-²H₁]-proline, 1b and 1a, respectively, has been devised. The key step of the route to the latter compounds involves highly stereoselective hydrolysis of the silyl enol ethers 3 and 3a, respectively, with protonation (deuteriation) from the re-face of the silyl enol ether.     

Highly efficient, multigram and enantiopure synthesis of (S)-2-(2,4′-bithiazol-2-yl)pyrrolidine

(S)-2-(4-Bromo-2,4′-bithiazole)-1-(tert-butoxycarbonyl)pyrrolidine ((S)-1) was obtained as a single enantiomer and in high yield by means of a two-step modified Hantzsch thiazole synthesis reaction when bromoketone 3 and thioamide (S)-4 were used. Further conversion of (S)-1 into trimethyltin derivative (S)-2 broadens the scope for further cross-coupling reactions.     

Regio- and stereoselective reactions of a rhodanine derivative with optically active 2-methyl- and 2-phenyloxirane

The reaction of a rhodanine derivative (=(Z)-5-benzylidene-3-phenyl-2-thioxo-1,3-thiazolidin-4-one; 1) with (S)-2-methyloxirane (2) in the presence of SiO₂ in dry CH₂Cl₂ for 10 days led to two diastereoisomeric spirocyclic 1,3-oxathiolanes 3 and 4 with the Me group at C(2) (Scheme 2). The analogous reaction of 1 with (R)-2-phenyloxirane (5) afforded also two diastereoisomeric spirocyclic 1,3-oxathiolanes 6 and 7 bearing the Ph group at C(3) (Scheme 3). The structures of 3, 4, 6, and 7 were confirmed by X-ray crystallography (Figs. 1 and 2). These results show that oxiranes react selectively with the thiocarbonyl group (CS) in 1. Furthermore, the nucleophilic attack of the thiocarbonyl S-atom at the SiO₂-activated oxirane ring proceeds with high regio- and stereoselectivity via an S_N2-type mechanism.     

Cyclopalladation of enantiopure oxazolines having the prochiral CMe2 moiety at position 2 of the heterocycle

(R)-4-Ethyl-2-(1,1-dimethylpropyl)-2-oxazoline (1) and (S)-4-tert-butyl-2-(1,1-dimethylbutyl)-2-oxazoline (2) were synthesized in two steps from the corresponding enantiopure amino alcohols and acid chlorides in a total yield of 95% and 72%, respectively. (S)-2-(1-Adamantyl-1-methylethyl)-4-isobutyl-2-oxazoline (3) was obtained from adamantyl bromide and l-leucinol in five steps in a total yield of 82%. Reactions of oxazolines 1–3 with Pd(OAc)₂ in AcOH or CH₂Cl₂ followed by treatment with LiCl afforded the corresponding μ-Cl dimeric cyclopalladated complexes 15, 17, and 20 in good yield. Compounds 15, 17, and 20 reacted with PPh₃ to furnish the corresponding mononuclear complexes 16, 19, and 21. The ³¹P NMR spectra of trans(N,P) adducts 16, 19, and 21 contained signals of two diastereomers in a ratio of ca. 1.3:1.     

Enantioselective synthesis of (1S,2S)-1,2-di-tert-butyl and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamines

An enantioselective synthesis of sterically congested 1,2-di-tert-butyl and 1,2-di-(1-adamantyl)ethylenediamines has been developed. Thus, diastereomerically pure trans-1-apocamphanecarbonyl-4,5-dimethoxy-2-imidazolidinones 6 and 7 were successfully prepared by optical resolution of (±)-trans-4,5-dimethoxy-2-imidazolidinone using apocamphanecarbonyl chloride (MAC-Cl) followed by stereospecific and stepwise substitution of the dimethoxyl groups using tert-butyl or 1-adamantyl cuprates to provide (4S,5S)-4,5-di-tert-butyl and (4R,5R)-4,5-di-(1-adamantyl)-2-imidazolidinones 12 and 15, respectively. Furthermore, N-acetyl 4,5-di-tert-butyl and 4,5-di-(1-adamantyl)-2-imidazolidinones 16a,b were enantioselectively deacetylated using a catalytic oxazaborolidine system to provide enantiopure 1-p-tolylsulfonyl-4,5-di-tert-butyl-2-imidazolidinones 12 and 19 and 1-p-tolylsulfonyl-4,5-di-(1-adamantyl)-2-imidazolidinones 18 and 20, respectively. Finally, N-p-tolylsulfonyl-2-imidazolidinones 12 and 15 were treated with 30 equiv of Ba(OH)₂·8H₂O to achieve ring cleavage and to provide (1S,2S)-1,2-di-tert-butylethylenediamine 3 and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamine 4.     

Formal syntheses of (−)- and (+)-aphanorphine from (2S,4R)-4-hydroxyproline

We describe the efficient formal syntheses of both natural (−)-aphanorphine and unnatural (+)-aphanorphine from the same commercially available amino acid, (2S,4R)-4-hydroxyproline. The tricyclic framework was constructed by intramolecular Friedel-Crafts reaction. (1R,4S)-1-Methyl-8-methoxy-3-(4-toluenesulfonyl)-2,3,4,5-tetrahydro-1,4-methano-3-benzazepine (8) was synthesized in six steps from sulfonamide 3; (−)-aphanorphine methyl ether 24 was obtained in seven steps from lactone 10. Intramolecular etherification of 18 proceeded with excellent stereoselectivity in the presence of BF₃·OEt₂, which has paved an efficient synthetic route to a series of medicinally attractive heterocycles.     

Synthesis, structure and mesomorphic properties of side-chain chiral liquid crystalline polysiloxanes based on (S)-(+)-2-methyl-1-butanol derivatives

The synthesis of five chiral liquid crystalline monomers (M₁-M₅), and their corresponding side-chain polymers (P₁-P₅) based on (S)-(+)-2-methyl-1-butanol derivatives is described. The chemical structures of the monomers were confirmed by FT-IR, ¹H NMR, and elemental analyses. The structure-property relationships of the monomers and polymers obtained are discussed. The mesomorphic properties were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarizing optical microscopy (POM), and X-ray diffraction (XRD) measurements. All monomers showed a cholesteric phase. For M₂, M₃, and M₅, besides a cholesteric phase and a smectic A (S_A) phase, M₂ also revealed an enantiotropic chiral smectic C phase and a monotropic smectic B (S_B) phase, and M₃ also showed a S_B phase. The polymers P₁-P₅ exhibited a S_A phase, moreover, P₂, P₃ and P₅ also revealed a phase. The experimental results demonstrated that a flexible siloxane backbone and a long flexible spacer tended to exhibit a low glass transition temperature, high thermal stability, and wide mesophase temperature range.     

Diastereoselective route to (2R,5S)- and (2S,5S)-2-methyl-1,6-dioxaspiro[4.5]decane, a pheromone component of the wasp Paravespula vulgaris

A diastereoselective approach to (2R,5S)- and (2S,5S)-2-methyl-1,6-dioxaspiro[4.5]decane 1 and 1a is described. The route starts with an alkylation reaction among the cyclopentanone N,N-dimethylhydrazone 6 and the chiral iodides (R)-3 or (S)-3, derived from the enantiomers of ethyl β-hydroxybutyrate, controlling the estereocenter at C-2 of the molecules. The alkylated products 7 and 7a were easily transformed into the 1,8-O-TBS-1,8-dihydroxy-5-nonanones 9 and 9a in four steps, and a subsequent stereoselective spiroketalization, in acidic media, afforded a Z:E mixture (1:2) of compounds 1 and 1a.     

(R,R,R)-Tris(2-hydroxy-1-methylethyl)- and (S,S,S)-tris(2-hydroxy-2-methylethyl)phosphine: water-soluble chiral trialkylphosphines with C3-symmetry

The first α- and β-chiral water-soluble trialkylmonophosphines, 1 and 2, respectively, both with C₃ symmetry, were synthesised from sodium phosphide and chiral mesylates, accessible from (S)-ethyl lactate. X-ray structures of a corresponding 2:1 gold(I) complex [1₂Au(I)]OTf and of a borane complex 2·BH₃ were determined.     

Hydroxynitrile lyase-catalyzed addition of HCN to 2- and 3-substituted cyclohexanones

The addition of HCN to monosubstituted cyclohexanones yielding cyanohydrins is strongly catalyzed by hydroxynitrile lyases (HNLs). With PaHNL from bitter almonds, the addition to 2-alkyl cyclohexanones 1b-g is highly (R)-selective, whereas the methyl compound 1a reacts (S)-selectively. With MeHNL from cassava, all 2-alkyl derivatives 1 react (S)-selectively. The catalytic activity of both PaHNL and MeHNL decreases with increasing size of the substituent in substrates 1. The diastereoselectivity of HCN additions to 2-alkoxy cyclohexanones 4 and 3-substituted cyclohexanones 6, however, is only moderate. The absolute configuration of the synthesized cyanohydrins was determined by X-ray crystallography of O-p-bromobenzoyl derivatives.     

Synthesis, characterization and electroluminescence of B(III) compounds: BPh2(2-(2-quinolyl)naphtho[b]imidazolato) and BPh2(2-(2-quinolyl)benzimidazolato)

Two novel luminescent boron compounds, BPh₂(2-(2-quinolyl)naphtho[b]imidazolato) (1) and BPh₂(2-(2-quinolyl)benzimidazolato) (2), have been synthesized by the reactions of triphenylboron with appropriate ligands, 2-(2-quinolyl)naphtho[b]imidazole (QNI) and 2-(2-quinolyl)benzimidazole (QBI), respectively. The structure of 1 was determined by single crystal X-ray diffraction, while 2 by spectroscopic methods. The structure of 1 reveals that the boron center is four coordinated. Several types of OLED possessing different colors were fabricated by using 1 as emitter. For the three-layer OLED with the structure ITO/NPB/2/Alq₃/Mg-Ag, an emission band covering the whole visible region from 400 to 750 nm with the maximum brightness of 320 cd/m² was observed, indicating a perfect white light OLED (CIE = 0.33, 0.37). Compounds 1 and 2 form a new family of organometallic emitting materials which could be of interest for practical application.     

Synthesis and structure of new palladium complexes with the ligand 2-(diphenylphosphino)-1-methylimidazole: Evidence of hemilability

Several Pd(II) complexes containing the potentially bidentate ligand 2-(diphenylphosphino)-1-methylimidazole, dpim, have been synthesized and characterized: [PdCl₂(dpim)]_n (1), [PdCl₂(H₂O)(dpim-κP)] (2), [PdClMe(μ-dpim-κP,κN)]₂ (3) (previously described), [PdClMe(dpim-κP)₂] (4), [Pd(C₆F₅)₂(dpim-κP)₂] (5) and [Pd(η³-2-Me-C₃H₄)(μ-dpim-κP,κN)]₂[PF₆]₂ (6). The highly insoluble complex 1 dissolves in wet DMSO-d₆ to give the water adduct 2 in which a hydrogen bond is established between one of the water hydrogens and the imidazolyl nitrogen. Two types of coordination mode have been found for the dpim ligand in these derivatives, with the ligand behaving as P monodentate and also as a P,N bridge. The transformations between 3 and 4 demonstrate the hemilability of the dpim ligand. Complex 6 was obtained as a mixture of two pairs of enantiomers (R,S)/(S,R) and (R,R)/(S,S). Analysis of the fluxional behaviour of 6, in which the allyl group acts as a “reporter ligand”, indicates that Pd-N bond rupture takes place - again providing evidence of the hemilabile character of the dpim ligand.     

Salen-ligands based on a planar-chiral hydroxyferrocene moiety: Synthesis, coordination chemistry and use in asymmetric silylcyanation

Condensation of the O-protected hydroxyferrocene carbaldehyde (S_p)-1 with suitable diamines, followed by liberation of the hydroxyferrocene moiety leads to a new type of ferrocene-based salen ligands (3). While the use of ethylenediamine in the condensation reaction yields the planar-chiral ethylene-bridged ligand [(S_p,S_p)-3a], reaction with the enantiomers of trans-1,2-cyclohexylendiamine gives rise to the corresponding diastereomeric cyclohexylene-bridged systems [(S,S,S_p,S_p)-3b and (R,R,S_p,S_p)-3c], which feature a combination of a planar-chiral ferrocene unit with a centrochiral diamine backbone. Starting with the ferrocene-aldehyde derivative (R_p)-1, the enantiomeric ligand series (3d/e/f) is accessible via the same synthetic route.The (S_p)-series of these newly developed N₂O₂-type ligands was used for the construction of the corresponding mononuclear bis(isopropoxy)titanium (4a/b/c), methylaluminum (5a/b/c) and chloroaluminum-complexes (6a/b/c), which were isolated in good yields and identified by X-ray diffraction in several cases. The aluminum complexes (5/6) were successfully used in the Lewis-acid catalyzed addition of trimethylsilylcyanide to benzaldehyde, yielding the corresponding cyanohydrins in 45-62% enantiomeric excess.     

Synthesis and structural characterization of enantiopure exo and endo six-membered oxazoline-derived palladacycles

Direct palladation of (S)-4-benzyl-2-methyl-2-oxazoline (1) and (S)-2-benzyl-4-tert-butyl-2-oxazoline (2) using Pd(OAc)₂ in MeCN afforded the corresponding μ-acetato-dimeric complexes with six-membered exo and endo palladacycles, respectively. The same complexes were obtained by reacting coordination complexes Pd(1)₂(OAc)₂ and Pd(2)₂(OAc)₂ with Pd(OAc)₂ in MeCN. Metalation of (S)-2,4-dibenzyl-2-oxazoline (3) with Pd(OAc)₂ in AcOH, MeCN or CH₂Cl₂ resulted in the regiospecific formation of the six-membered endo palladacycle. The obtained μ-acetato-dimeric complexes were converted to the corresponding μ-chloro-dimeric derivatives 7, 11 and 13 by treatment with LiCl in acetone. The mononuclear PPh₃ adducts 8, 12 and 14 were obtained by reacting dimers 7, 11 and 13 with PPh₃ in benzene. NMR spectroscopy data supported the proposed structures of all complexes and suggested that exo and endo palladacycles in 8 and 12 have rigid boat conformations in CHCl₃. The X-ray crystal structures of the μ-acetato dimer 6 with the exo palladacycle and the PPh₃ adduct 14 with the endo metalacycle revealed boat conformation of both palladacycles and chiral twisted conformations δ(S) and λ(S), respectively, of the oxazoline rings in the solid state.     

Chemo- and diastereoselective control for a flexible approach to (5S,6S)-6-alkyl-5-benzyloxy-2-piperidinones

Chemo- and diastereoselective transformation of the N,O-acetals and their chain tautomers (4/5), readily derived from protected 3-hydroxyglutarimide 1a, was studied. It was uncovered that while the reaction with a combination of boron trifluoride etherate/zinc borohydride led to cyclic products (5S,6S/R)-6-alkyl-5-benzyloxy-2-piperidinones 3/2, and 6 in modest chemo- and diastereoselectivities, the reaction of 4/5 with zinc borohydride led exclusively to the formation of the ring-opening products 6 in excellent anti-diastereoselectivities. On the basis of the latter reaction, a flexible approach to (5S,6S)-6-alkyl-5-benzyloxy-2-piperidinones 3 was disclosed.     

Zn(II), Cd(II) and Hg(II) complexes with 1-(p-methoxybenzyl)-2-(p-methoxyphenyl)benzimidazole: Syntheses, structures and luminescence

Five coordination compounds Zn(mbmpbi)₂Cl₂ (1), Zn(mbmpbi)₂Br₂ (2), Cd(mbmpbi)₂Cl₂ (3), Hg(mbmpbi)₂Cl₂ (4) and Hg(mbmpbi)₂Br₂ (5) were synthesized by the reaction of 1-(p-methoxybenzyl)-2-(p-methoxyphenyl)benzimidazole (mbmpbi) with the corresponding metal halides. The complexes have been characterized by elemental analysis, conductance measurements, FT-IR, ¹H NMR and photoluminescence spectral studies. The ligand mbmpbi exhibits the N-benzimidazole coordination. The structures of 3-5 have been determined by single crystal X-ray diffraction. These three complexes are isostructural, crystallizing in the monoclinic system, P2/n space group with a distorted tetrahedral geometry around the metal ion. Zn(II) and Cd(II) complexes show strong blue emission in solid state at room temperature.     

Total synthesis of natural (+)-hyacinthacine A6 and non-natural (+)-7a-epi-hyacinthacine A1 and (+)-5,7a-diepi-hyacinthacine A6

Naturally occurring (1S,2R,3R,5R,7aR)-1,2-dihydroxy-3-hydroxymethyl-5-methylpyrrolizidine [(+)-hyacinthacine A₆, 2] together with unnatural (1S,2R,3R,7aS)-1,2-dihydroxy-3-hydroxymethylpyrrolizidine [(+)-7a-epi-hyacinthacine A₁, 3] and (1S,2R,3R,5S,7aS)-1,2-dihydroxy-3-hydroxymethyl-5-methylpyrrolizidine [(+)-5,7a-diepi-hyacinthacine A₆, 4] have been synthesized from a DALDP derivative [5, (2R,3S,4R,5R)-3,4-dibenzyloxy-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine], as the homochiral starting material. The synthetic process employed took advantages of Wittig methodology followed by internal lactamization, in the case of (+)-7a-epi-hyacinthacine A₁ (3), and reductive amination for (+)-hyacinthacine A₆ (2) and (+)-5,7a-diepi-hyacinthacine A₆ (4).