[4+1] Cycloaddition of N-acylimine derivatives with isocyanides: efficient synthesis of 5-aminooxazoles and 5-aminothiazoles

[4+1] Cycloaddition reaction between isocyanides and N-acylimine derivatives generated from N-acyl N,O-acetals acting as isocyanophiles has been developed. These reactions proceeded smoothly and cleanly to afford the corresponding 5-aminooxazoles in high yields. This reaction was extended to the syntheses of 5-aminothiazoles by using N-thioacyl N,O-acetals. A wide range of N-acyl N,O-acetals, N-thioacyl N,O-acetals, and isocyanides were found to be applicable to this reaction.     

An efficient,rapid and facile procedure for conversion of aldoximes to nitriles using triphenylphosphine and N-halo sulfonamides

N,N,N＇,N＇-Tetrabromobenzene-1,3-disulfonamide （TBBDA）/triphenylphosphine and N,N,N＇,N＇-tetra- chlorobenzene-1,3-disulfonamide （TCBDA）/triphenylphosphine have been introduced as highly efficient systems for the versatile conversion of aldoxime derivatives into nitriles. The process reported here is operationally simple and reactions have been mildly performed in dichloromethane at room temperature.     

Mild bromination of unreactive aromatic compounds

N,N,N′,N′-Tetrabromobenzene-1,3-disulfonamide and poly(N,N′-dibromo-N-ethylene-benzene-1,3-disulfonamide) in concentrated H₂SO₄ can be used as efficient reagents for the mild bromination of unreactive arenes at room temperature, under solvent-free conditions, in good yields.     

Use of Stille-type cross-coupling as a route to oligopyridylimines

The new tin reagents, 2-(n-Bu₃Sn)-6-{C(R)OCH₂CH₂O}-C₅H₃N, (R=H a, Me b), have been employed in Stille-type cross-coupling reactions with a range of oligopyridylbromides generating, following a facile deprotection step, a series of formyl- and acetyl-functionalised oligopyridines. Condensation reactions with 2,6-diisopropylaniline has allowed access to families of novel sterically bulky multidentate N,N,N,N (tetradentate), N,N,N,N,N (pentadentate), N,N,N,N,N,N (sexidentate) and N,N,N,N,N,N,N (heptadentate) nitrogen donor ligands. This work represents a straightforward and rapid synthetic route for the preparation of oligopyridylimines, which are expected to act as useful components for the self-assembly of polymetallic complexes.     

Investigation of amination in 4-chloro-2-phenylquinoline derivatives with amide solvents

Novel 4-amino-2-phenylquinoline derivatives were synthesized by reacting various 4-chloro-2-arylquinoline compounds having activated chloro group with the corresponding amide solvents at reflux for overnight. The activity of amination by the amide solvents depended on the competition between the steric and electronic effect of the N-substituents on the amino group. Their activities were shown as N,N-dimethylformamide>N,N-diethylformamide>N-methylformamide>formamide>N,N-dimethylacetamide>N,N-dimethylpropionamide. The yields for the amination products seemed proportional to the ease of the dissociation of the amides.     

Antibacterial activity of N-quaternary chitosan derivatives: Synthesis, characterization and structure activity relationship (SAR) investigations

Quaternary N-(2-(N,N,N-tri-alkyl ammoniumyl and 2-pyridiniumyl) acetyl) derivatives of chitosan polymer, chitooligomer, and glucosamine (monomer) were synthesized for the purpose of investigating the structure activity relationship (SAR) for the antibacterial effect. Novel methods were used in the synthesis. The final chitosan and chitooligomer derivatives could thus be obtained in two steps without prior protection of the hydroxyl groups. However, in order to obtain chitosan derivatives with the bulky N,N-dimethyl-N-dodecyl- and N,N-dimethyl-N-butyl side chains three steps were needed, starting from 3,6-O-di-tert-butyldimethylsilyl chitosan (3,6-O-di-TBDMS chitosan) as the key intermediate. The quaternary ammoniumyl acetyl derivatives of glucosamine were synthesized from glucosamine or tetra-O-acetylglucosamine. N,N,N-trimethyl chitosan (TMC) was used as reference compound for investigation of antibacterial activity. Clinical Laboratory Standard Institute (CLSI) protocols were used to determine MIC and MLC for activity against clinically important Gram-positive strains Staphylococcus aureus (ATCC 25923), and S. aureus (MRSA) (ATCC 43300), and Gram-negative strains of Escherichia coli (ATCC 25922), P. aeriginosa (ATCC 27853) and Enterococcus facialis (ATCC 29212). The MIC values for the compounds ranged from 8 to ?8192 mg/L. In general the N-(2-(N,N-dimethyl-N-dodecyl ammoniumyl) acetyl) derivatives of chitooligomer and glucosamine monomer were more active against bacteria than derivatives with shorter alkyl chains. In contrast the N-(2-(N,N-dimethyl-N-dodecyl ammoniumyl) acetyl) derivatives of chitosan were less active than derivatives with N-(2-N,N,N-trimetylammoniumyl) acetyl or N-(2-(N-pyridiniumyl) acetyl) quaternary moiety. N,N,N-trimethyl chitosan (TMC) was the most active compound in this study.     

Recent progress in controlled radical polymerization of N-vinyl monomers

This review summarizes recent advances in the controlled radical polymerization of N-vinyl monomers, such as N-vinylcarbazole, N-vinylindole derivatives, N-vinylpyrrolidone, N-vinylcaprolactam, N-vinylformamide, N-vinylacetoamide derivatives, N-vinyl(na)phthalimides, N-vinylimidazolium salts, and N-vinyltriazoles. Recent significant progress of controlled radical polymerization of these N-vinyl monomers has allowed for the synthesis of well-defined functional polymers having various architectures, including block copolymers, branched polymers (stars, star block copolymers, miktoarm star copolymers, and graft copolymers), and hybrids. Characteristic properties, assembled structures, and three-dimensional architectures of these functional polymers derived from N-vinyl monomers are briefly introduced.     

Ruthenium trichloride catalyzed synthesis of 2,3-unsaturated-N-glycosides via Ferrier azaglycosylation

An efficient, economical and mild protocol for the synthesis of 2,3-unsaturated-N-glycosides has been developed using ruthenium(III) chloride. The Ferrier azaglycosylation of glycals with various N-nucleophiles such as sulfonamides, benzamides, carbamates and N-substituted sulfonamides proceeded smoothly to afford the corresponding 2,3-unsaturated-N-glycosides or ‘N-pseudoglycals’ in good yields (64–98%). High α-anomeric selectivity was observed with N-substituted sulfonamides such as N-benzyl or N-phenyl sulfonamides under similar conditions.     

Indole 3-alkylation/vinylation under catalysis of the guanidinium ionic liquids

Two ionic liquids, N,N,N,N-tetramethylguanidinium trifluoroacetate (TMGT) and the unprecedented N,N,N,N-tetramethylguanidinium triflate (TMGT_f), were used as catalyst solvents in condensations between indoles and arylaldehydes or 1,3-diketones providing a simple and efficient method for synthesis of bis(3-indolyl)methanes or casually 3-alkenylindoles due to stereoelectronic concerns of reactants. The ionic liquids are easily separated and reused for several times.     

Catalytic enantioselective synthesis of secondary alcohols using C2-symmetric diamino diol ligands

A new class of diamino diols was evaluated as catalytic ligands in the enantioselective borane reduction of aromatic ketones and the enantioselective ethylation of arylaldehydes with diethylzinc. By variation of the substitution pattern on the ketone, e.e.s of up to 94% could be obtained by in situ borane reduction using 0.025 equiv. of the ligand at 35°C in THF. N,N,N′,N′-Tetramethyldiamino diol and N,N′-dialkyl diamino diol were used as promoters for the enantioselective addition of diethylzinc reagent to the arylaldehyde, where use of 0.1 equiv. of N,N,N′,N′-tetramethyl diamino diol as catalyst in the addition of diethylzinc to arylaldehyde achieved e.e.s of up to 98%.     

Synthesis and network structure of ionic poly(N,N-dimethylacrylamide-co-acrylamide) hydrogels: Comparison of swelling degree with theory

At four different charge densities, ionic hydrogels based on N,N-dimethylacrylamide (DMAAm), acrylamide (AAm), and itaconic acid (IA) were synthesized by free-radical cross-linking copolymerization in water with N,N-methylenebis(acrylamide) (BAAm) as the cross-linker, ammonium persulfate (APS) as the initiator, and N,N,N′,N′-tetramethylenediamine (TEMED) as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross-linked ionic poly(N,N-dimethylacrylamide-co-acrylamide) [P(DMAAm-co-AAm)] hydrogels at different pHs agreed with the modified Flory-Rehner equation based both on the phantom network and affine network models and the ideal Donnan theory. In addition, the kinetics of swelling of the hydrogels was studied in pH 2, 5 and 9 buffer solutions. The swelling curves exhibited the characteristic features of transport process, apparently the Fickian diffusion of fast rates.     

Organic high-spin systems of oligoarylamines: Properties of tetraaryl-m-phenylendiamine oligocations as examined by electron transfer stopped-flow method

Three types of N,N,N′,N′-tetraaryl-1,3-phenylenediamines with bromo atoms as protecting groups were designed and synthesized. Electrochemical and novel electron transfer stopped-flow (ETSF) methods were invoked for characterizing the absorption spectra of the corresponding short-lived mono- and dicationic states. Useful molecular design rules for stabilizing the dicationic states of N,N,N′,N′-tetraaryl-1,3-phenylenediamines as precursors for positively charged high-spin systems were elucidated. An extended system, 3,3′-bis(diphenylamino)triphenylamine in the tricationic state with four bromo groups was also examined, being confirmed to give a ground-state triplet dication by ESR spectroscopy.     

Effect of solvent nature on free-radical copolymerization of N,N-diallyl-N,N-dimethylammonium chloride and maleic acid

The free-radical copolymerization of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid in DMSO proceeds to yield statistical copolymers. When the reaction is carried out in methanol, the copolymers of constant compositions (N,N-diallyl-N,N-dimethylammonium chloride: maleic acid = 2: 1) are formed over a wide range of comonomer ratios in the starting mixture. The formation of alternating copolymers in this case may be attributed to formation of donor-acceptor complexes between the comonomers in the methanol solution, as evidenced by UV spectrophotometry. The kinetic features of the process have been investigated, and the relative activities of the monomers have been assessed. ¹³C NMR studies have demonstrated that, regardless of the solvent nature, both double bonds of N,N-diallyl-N,N-dimethylammonium chloride are involved in copolymerization via intermolecular cyclization accompanied by formation of pyrrolidinium structures.     

Reaction of ferrocenecarboxylic acid with N,N-disubstituted carbodiimides: synthesis, spectroscopic and X-ray crystallographic analysis of N,N-disubstituted N-ferrocenoylureas and identification of a one-pot coupling reagent for the formation of ferrocenecarboxamides in a non-aqueous solvent

N,N^′-dicyclohexyl-N-ferrocenoylurea 2, N,N^′-diisopropyl-N-ferrocenoylurea 3, N,N^′-di-p-tolyl-N-ferrocenoylurea 4 and N,N^′-di-tert-butyl-N-ferrocenoylurea 5 were obtained by reaction of ferrocenecarboxylic acid 1 with N,N^′-dicyclohexylcarbodiimide (DCC), N,N^′-diisopropylcarbodiimide (DIC), N,N^′-di-p-tolylcarbodiimide 10 and N,N^′-di-tert-butylcarbodiimide 11, respectively. Both N-tert-butyl-N^′-ethyl-N-ferrocenoylurea 6 and N^′-tert-butyl-N-ethyl-N-ferrocenoylurea 7 were obtained by reaction of 1 with N-tert-butyl-N^′-ethylcarbodiimide 12. In all cases a small amount of ferrocenecarboxylic anhydride 8 was formed as a by-product. All compounds were characterized by ¹H NMR, ¹³C NMR, IR and MS. Single crystal X-ray structural analyses were made of 2, 3 and 4. From the consistent results, the reaction products of 1 with carbodiimides appear different from those proposed by some earlier workers. With N-(3-dimethylaminopropyl)-N^′-ethylcarbodiimidehydrochloride 9 ferrocenoylurea was not isolated, but the main product was rather 8. The suitability of 8 as acylation reagent was applied by using 9 to obtain N-(3-triethoxysilyl)-propylferrocenecarboxamide in a one-pot reaction from 1 and 3-(triethoxysilyl)-propylamine.     

Helicity of N,N′-diaryl-trans-1,2-diaminocyclohexane derivatives. Implications for molecular helicity manipulations

Derivatives of trans-1,2-diaminocyclohexane (DACH), useful as chiral ligands, scaffolds and building blocks, differ in their conformation. The conformation of N,N′-diaryl-DACH derivatives was studied by the semiempirical and DFT computational methods and by exciton-coupled circular dichroism. It was found that, contrary to M-helical N,N′-diimine, N,N′-diimide and N,N′-diamide derivatives, the aromatic residues in N,N′-diphenyl derivatives are oriented to form a P-helix for the (R,R)-DACH absolute configuration. The helicity of the bis-aryl system is modified in the case of 1-naphthyl or 2-naphthyl derivatives. Further switching of helicity has been demonstrated by either protonation or mono-N-acetylation of N,N′-diaryl DACH derivatives.     

Synthesis, luminescence properties, and theoretical insights of N-alkyl- or N,N-dialkyl-pyrene-1-carboxamide

We report the synthesis and photophysical properties of N-alkyl- or N,N-dialkyl-pyrene-1-carboxamide. These derivatives, as well as pyrene, exhibited blue emission. N-Alkyl-type derivatives exhibited strong fluorescence emission (Φ_fl = 0.61 in EtOH) in both nonpolar and polar solvents. On the other hand, N,N-dialkyl-type derivatives showed weak fluorescence emission (Φ_fl <0.01) due to vibrational deactivation. However, in highly viscous solvents such as glycerin, the quantum efficiencies of N-alkyl-type (Φ_fl = 0.91) and N,N-dialkyl-type (Φ_fl = 0.082) derivatives were increased. We also investigated the fluorescence mechanism of these compounds using time-dependent density-functional theory (TD-DFT). From these results, we find that highly fluorescent pyrene-1-carboxamide derivatives can be designed by introducing an appropriate functional group at the nitrogen atom of the amide. Thus, N,N-dialkyl-type pyrene-1-carboxamide has considerable potential for use in applications such as environmental response sensors and probes.     

The influence of N-alkylation and chain length in the coordination ability of diamines towards silver(I) in dimethylsulfoxide

The thermodynamic functions for the complexation of Ag(I) by the following diamines: N,N-dimethyldiethylenediamine (N,N-dmen), N,N-dimethyl-1,3-propanediamine (N,N-dmtn) and N,N,N′,N′-tetramethyl-1,3-propanediamine (tmtn) have been determined in dimethylsulfoxide (dmso) by potentiometric and calorimetric techniques at 298 K and 0.1 mol dm⁻³ ionic strength (NEt₄ClO₄). Only mononuclear complexes are formed (AgL_j ⁺, j=1, 2) where the ligands act as monodentate or chelate agents. All the complexes are enthalpy stabilized whereas the entropy changes counteract the complexation. The different basicities and steric requirements of both the ligands and complexes formed together with the size of the chelate rings are taken into account to discuss the results presented here.     

Syntheses of amides via iodine-catalyzed multiple sp~3 C–H bonds oxidation of methylarenes and sequential coupling with N,N-dialkylformamides

<正>~~     

Synthesis of polyfunctionalized methylphosphine oxides

N,N-Dialkylamino(diphenylphosphoryl)chloromethanes, a new type of organophosphorus compounds, were synthesized. On dissolving in polar and low polar solvents, N,N-dialkylamino(diphenylphosphoryl)chloromethanes dissociate spontaneously with the P??C bond cleavage to form the diphenylphosphinite anion Ph₂PO^?. This was confirmed by the reaction of N,N-dimethylamino(diphenylphosphoryl)chloromethane with electrophilic substrates to form the corresponding addition or substitution products of Ph₂PO^?. The capability of spontaneous generating the diphenylphosphinite anion considers accessible N,N-dimethylamino(diphenylphosphoryl)chloromethane as a synthetic equivalent of the diphenylphosphinite anion.     

Metallextraktion mit N-thiobenzoyl-N-phenylhydroxylamin: Extraction of metal ions with N-thiobenzoyl-N-phenylhydroxylamine

The extraction parameters pH_{$\text{1}\text{2}$} and K_ex for Mn, Fe, Co, Ni, Cu, Zn, Cd, and Pb with N-thiobenzoyl-N-phenylhydroxylamine are reported. N-Thiobenzoyl-N-phenylhydroxylamine extracts metals from more strongly acidic solutions than does N-benzoyl-N-phenylhydroxylamine. Iron(III) is extracted as a 1:2 chelate with the extracant, whereas iron(II) forms the expected tris chelate by oxidation. The other bivalent ions are extracted as their bis chelates.