Calculated equivalence volume in complexometric titrations

Summary Using a digital pH-meter, a motorized burette and a programmable pocket calculator, complexometric titrations were executed with a high degree of precision, a high degree of accuracy and in a time comparable to the one needed for performing a titration with a visual indicator. If a suitable sensing electrode is at hand, concentrations as low as 0.001 M may be analyzed without difficulties.

---

Berechnetes Äquivalenzvolumen bei komplexometrischen Titrationen

Zusammenfassung Mit Hilfe eines Digital-pH-Meßge-räts, einer Motorbürette und einem programmierbaren Taschenrechner konnten komplexometrische Titrationen mit hoher Präzision und Genauigkeit in einer der visuellen Indikation vergleichbaren Zeit durchgeführt werden. Mit einer geeigneten Meßelektrode können Konzentration bis herab zu 0,001 M ohne Schwierigkeiten erfaßt werden.

     

Total synthesis of myxol and deoxymyxol stereoisomers and their application to determining the absolute configurations of the natural products

The total synthesis of myxol stereoisomers 1a,b and deoxymyxol (plectaniaxanthin) stereoisomers 2a,b was accomplished by Wittig reaction of (S)- and (R)-C₁₀-phosphonium salts 8a,b bearing a silyl-protected 1,2-dihydroxy-ψ end group with C₃₀-apocarotenals 6 and 7. The phosphonium salts 8a,b were derived from aldehydes 11a,b possessing a cyclopentylidene ketal moiety, prepared via Sharpless asymmetric epoxidation of allylic alcohol 12 followed by regioselective cleavage of the oxirane ring. We established an analytical HPLC method using a chiral column to separate stereoisomers 1a,b and 2a,b and thus determined the absolute configurations of the natural products. The HPLC analyses established that both myxol and deoxymyxol isolated from bacteria have the 2′S-configuration.     

Synthesis and Characterization of Pyrrolthiosemicarbazone Complexes of Palladium(II). Crystal Structures of [{Pd[C4H4NC(H)=NNC(S)NHMe](Cl)}2{μ‐Ph2P(CH2)3PPh2}] and [Pd{C4H4NC(H)=NNC(S)NHMe}{Ph2P(CH2)2PPh2‐P,P}](Cl)

Reaction of the thiosemicarbazone ligands C₄H₄NC(H)=NN(H)C(S)NHR (R = Me, a ; Et, b ) with Li₂[PdCl₄] gave the dinuclear complexes [Pd{C₄H₄NC(H)=NNC(S)NHR}(μ‐Cl)]₂ (R = Me, 1a ; Et, 1b ) with a central Pd₂Cl₂ core and with deprotonation of the thiosemicarbazones at the hydrazinic nitrogen atom. Treatment of 1a and 1b with triphenylphosphine gave the mononuclear compounds [Pd{C₄H₄C(H)=NNC(S)NHR}(Cl)(PPh₃)] (R = Me, 2a ; Et, 2b ), whereas reaction of 1a and 1b with tertiary diphosphines gave mono‐ and dinuclear compounds, as appropriate, with the corresponding diphosphine acting as a monodentate ( 6b ), chelating ( 3a ) and bridging ligand ( 4a, 5a , 4b, 5b ). Treatment of 1a and 1b with (Ph₂PCH₂CH₂PPh₂)W(CO)₅ gave the new heterobimetallic complexes 7a and 7b . The crystal structures of complexes 3a and 4a are described.     

Enhanced resolution comprehensive two-dimensional gas chromatography applied to the analysis of roasted coffee volatiles

The present research is based on the full exploitation of the separation power of a 0.05 mm internal diameter (ID) capillary, as a comprehensive two-dimensional (2D) GC (GC × GC) secondary column, with the objective of attaining very high-resolution second dimension separations. The aim was achieved by using a split-flow system developed in previous research [P.Q. Tranchida, A. Casilli, P. Dugo, G. Dugo, L. Mondello, Anal. Chem. 79 (2007) 2266], and a dual-oven GC × GC instrument. The column combination employed consisted of a polar 30 m × 0.25 mm ID column connected, by means of a T union, to a detector-linked high-resolution 1.1 m × 0.05 mm ID apolar analytical column and to a 0.33 m × 0.05 mm ID retention gap; the latter was connected to a manually operated split valve. As previously demonstrated, the use of a split valve enables the regulation of gas flows through both analytical columns, generating the most appropriate gas linear velocities. Comprehensive 2D GC experiments were carried out on Arabica roasted coffee volatiles (previously extracted by means of solid-phase microextraction) with the split-valve closed (equal to what can be defined as conventional GC × GC) and with the split-valve opened at various degrees. The reasons why it is absolutely not effective to use a 0.05 mm ID column as second dimension in a conventional GC × GC instrument will be discussed and demonstrated. On the contrary, the use of a 0.05 mm ID column as second dimension, under ideal conditions in a split-flow, twin-oven system, will also be illustrated and discussed.     

“Spontaneous” Ambient Temperature Dehydrocoupling of Aromatic Amine–Boranes

The dehydrocoupling/dehydrogenation behavior of primary arylamine–borane adducts ArNH₂ ? BH₃ ( 3 a – c ; Ar= a : Ph, b : p‐MeOC₆H₄, c : p‐CF₃C₆H₄) has been studied in detail both in solution at ambient temperature as well as in the solid state at ambient or elevated temperatures. The presence of a metal catalyst was found to be unnecessary for the release of H₂. From reactions of 3 a , b in concentrated solutions in THF at 22 °C over 24 h cyclotriborazanes (ArNH‐BH₂)₃ ( 7 a , b ) were isolated as THF adducts, 7 a , b? THF, or solvent‐free 7 a , which could not be obtained via heating of 3 a – c in the melt. The μ‐(anilino)diborane [H₂B(μ‐PhNH)(μ‐H)BH₂] ( 4 a ) was observed in the reaction of 3 a with BH₃?THF and was characterized in situ. The reaction of 3 a with PhNH₂ ( 2 a ) was found to provide a new, convenient method for the preparation of dianilinoborane (PhNH)₂BH ( 5 a ), which has potential generality. This observation, together with further studies of reactions of 4 a , 5 a , and 7 a , b , provided insight into the mechanism of the catalyst‐free ambient temperature dehydrocoupling of 3 a – c in solution. For example, the reaction of 4 a with 5 a yields 6 a and 7 a . It was found that borazines (ArN‐BH)₃ ( 6 a – c ) are not simply formed via dehydrogenation of cyclotriborazanes 7 a – c in solution. The transformation of 7 a to 6 a is slowly induced by 5 a and proceeds via regeneration of 3 a . The adducts 3 a – c also underwent rapid dehydrocoupling in the solid state at elevated temperatures and even very slowly at ambient temperature. From aniline–borane derivative 3 c , the linear iminoborane oligomer (p‐CF₃C₆H₄)N[BH‐NH(p‐CF₃C₆H₄)]₂ ( 11 ) was obtained. The single‐crystal X‐ray structures of 3 a – c , 5 a , 7 a , 7 b? THF, and 11 are discussed.     

A sensitive mediator-free tyrosinase biosensor based on an inorganic-organic hybrid titania sol-gel matrix

A novel inorganic-organic hybrid titania sol-gel nanocomposite film was prepared to fabricate a sensitive tyrosinase biosensor for the amperometric detection of trace phenolic compounds without additional electron mediators. Acetylacetone worked as a complexing ligand to chelate with Ti atom in the synthesis process, and the pH of the titania solution could be adjusted to the value which was optimum for retaining tyrosinase activity and such a membrane was stably attached on to the surface of a glassy carbon electrode (GCE). This titania matrix could supply a good environment for enzyme loading, which resulted in a high sensitivity of 15.78 μA μM⁻¹ cm⁻² for monitoring phenols with a detection limit of 1×10⁻⁸ M at a signal-to-noise ratio of 3. The TiO₂ sol-gel derived biosensor exhibited a fast response less than 10 s and a good stability for more than 2 months.     

Conformational Changes and Redox Properties of Bimetallic Single Helicates of Hexapyrrole-α,ω-dicarbaldehydes

The hexapyrrole-α,ω-dicarbaldehydes 1 a and 1 b were metallated with Cu^II, Ni^II, and Pd^II to give bimetallic complexes where a pair of 3 N+O four-coordinate metal planes are helically distorted and the central 2,2′-bipyrrole subunit adopts a cis or trans conformation. X-ray crystallographic analysis of the bisCu complex revealed a closed form with a cis-2,2′-bipyrrole subunit and an open form with a trans-2,2′-bipyrrole subunit. The bisPd complexes took a closed form both in the solid state and in solution. They are regarded as single helicates of two turns and the energy barrier for the interchange between an M helix and a P helix was remarkably influenced by the bulky 3,3′-substituent of the central 2,2′-bipyrrole subunit. Although the bisNi complexes adopt a closed form in the solid state, they exist as a homohelical open C₂-symmetric form or a heterohelical open C_i-symmetric form in solution. A theoretical study suggested that the closed form of 1 a Pd was stabilized by the Pd–Pd interaction. Compound 1 a Pd was reversibly oxidized by one electron at 0.14 V versus ferrocene/ferrocenium (Fc/Fc⁺) and this oxidized species showed Vis/NIR absorption bands at λ=767 and 1408 nm.     

Matrix diversion methods for improved analysis of perchlorate by suppressed ion chromatography and conductivity detection

Two inline matrix diversion methods were developed for the sensitive analysis of perchlorate in a matrix comprising up to 1000 mg l⁻¹ of chloride, sulfate and bicarbonate ions using suppressed ion chromatography and conductivity detection. The first method used a cryptand C1 concentrator column, which exhibited a high selectivity for perchlorate ion over the other matrix anions. After retaining the sample anions in a concentrator column derivatized with a crytpand phase, a rinse step was implemented with a weak base to divert the matrix ions to waste while selectively retaining perchlorate in the concentrator column for subsequent analysis. The analysis was done using a 2 mm IonPac^® AS16 or 2 mm IonPac^® AS20 separator column. The second method was a two-dimensional matrix diversion method with a focus on improving the detection sensitivity. The first dimension was used to achieve some resolution of the matrix ions from perchlorate. The perchlorate ion was then diverted into a concentrator column for subsequent analysis in the second dimension. By pursuing analysis using a 4 mm IonPac^® AS16 or IonPac^® AS20 column in the first dimension and subsequently pursuing analysis using a 2 mm IonPac^® AS16 or IonPac^® AS20 column format, excellent sensitivities were achieved when the first and second dimensions were operated at the same linear flow velocity (cm min⁻¹). While sensitive detection of perchlorate in the low μg l⁻¹ regime was achieved by the above methods in the presence of matrix ions, superior recovery for perchlorate was demonstrated under a variety of matrix concentrations by the second method.     

A p‐Type NiO‐Based Dye‐Sensitized Solar Cell with an Open‐Circuit Voltage of 0.35 V

In tandem : Employing a molecular dyad and a cobalt‐based electrolyte gives a threefold‐increase in open‐circuit voltage (V_OC) for a p‐type NiO device (V_OC=0.35 V), and a fourfold better energy conversion efficiency. Incorporating these improvements in a TiO₂/NiO tandem dye‐sensitized solar cell (TDSC), results in a TDSC with a V_OC=0.91 V (see figure; CB=conductance band, VB= valence band).

     

Development of a method for estimating an accurate equivalence point in nickel titration of cyanide ions

In a nickel titration of cyanide ions using murexide as indicator, an accurate equivalence point was determined by a non-linear least-squares curve-fitting for a titration curve. This method was developed to establish a standard solution for cyanide ions. In a curve-fitting procedure, a theoretical titration curve was calculated, assuming that nickel ion formed only a 1:4 Ni²⁺:CN⁻ complex with cyanide ions and formed only a 1:1 complex with murexide. Results of the curve-fitting were reasonable at any pH and any indicator concentration studied. The combined standard uncertainty for a concentration of a 1000 mg kg⁻¹ cyanide solution by this method was 0.079%.     

Supramolecular polymer networks based on calix[5]arene chained poly(p-phenyleneethynylene) and C60 fulleropyrrolidine

Abstract

A poly(p-phenyleneethynylene) polymer (PCF[5]), bearing two π-rich cone-like calix[5]arene cavities (assembling cores) attached to a rigid p-phenyleneethynylene spacer, was synthesised by a Pd-catalysed cross-coupling reaction. UV–vis absorption and fluorescence spectroscopies combined with dynamic light scattering measurements provide evidence for the self-assembly of PCF[5] (homopolytopic host molecule) with a complementary C₆₀ fulleropyrrolidine (C₆₀-Pyr) guest in solution, in the construction of a supramolecular polymer network. Atomic force microscopy analysis of PCF[5]/C₆₀-Pyr highlights the formation of a bicontinuous network consisting of a uniform distribution of prominent structures, within a polymeric background forming a biphasic structure.     

Synthese neuer 4-Hydroxybenzonitrilderivate und deren herbizide Eigenschaften

The synthesis of several new derivatives of 2-amino-4-hydroxybenzonitrile2 and their herbicidal screening data are described. Thus, halogenation and furtherSandmeyer-Reaction of2 leads to the 2,3,5-trihalogenated derivatives5 a–e. Reaction of ethyl chloroformate with the amino group of2 gives6 a, acylation7 a, b and8. The 3,5-dihalogenated compounds10 a–e are obtained from6 a and7 a, b by bromination or iodation. The hydroxyl group of6 a, 7 a, b and10 a, c, e reacts with N,N-disubstituted carbamyl chlorides to give6 c, d, 9 a, b, 11, 12 and13 a, b.

     

Transition of polymers from rubbery elastic state to fluid state

On increasing the temperature of a polymer, the transition of the polymer from a rubbery elastic state to a fluid state could occur. The transition temperature is termed the fluid temperature of the polymer, T _f, which has a direct relationship with the polymer molecular weight. As one of polymer parameters, T _f is as important as the glass transition temperature of a polymer, T _g. Moreover, special attention to T _f should be paid for polymer processing. In research on the transition of a polymer from a rubbery elastic state to a fluid state, the concept of T _f would be more reasonable and more effective than the concept of T _l,l because it is neglected in the concept of T _l,l in that the molecular weight of a polymer may affect the transition of the polymer. In this paper the discussion on the fluid temperature involves the characters of polymers, such as the deformation—temperature curve, the temperature range of the rubbery state and the shear viscosity of polymer melt. From the viewpoint of the cohesional state of polymers, the transition of a polymer from a rubbery elastic state to a fluid state responds to destruction and construction of the cohesional entanglement network in the polymer. The relaxing network of polymer melt would be worthy to be considered as an object of study. __________ Translated from Huaxue Tongbao (Chemistry), 2008,71(3) (in Chinese)     

Synthesis and characterization of hollandite-type material intended for the specific containment of radioactive cesium

The hollandite Ba₁Cs_0.28Fe_0.82Al_1.46Ti_5.72O₁₆, which has been proposed for the cesium-specific conditioning, can be synthesized either by an alcoxyde or a dry route. In both cases, a two-step protocol is applied, i.e., a calcination at 1000 °C followed by a sintering at 1200 °C. After sintering, both synthetic processes lead to a tetragonal form. According to the X-ray diffraction (XRD) patterns collected at the barium and the cesium K absorption edges, the different positions of these two elements have been evidenced with a more centered position in the oxygen cubic site of the tunnel for Ba than for Cs. On the contrary, after calcination, the two synthetic routes yield different products. The alcoxyde route gives rise to a mixture of the aforementioned Cs- and Ba-containing tetragonal I4/m hollandite, a Cs-only-containing monoclinic I2/m hollandite and an unidentified phase with a weak coherence length containing only Ba. The dry route yields a single tetragonal hollandite material containing Ba and Cs slightly different in composition from the targeted compound.     

A Ruthenium(II)–Copper(II) Dyad for the Photocatalytic Oxygenation of Organic Substrates Mediated by Dioxygen Activation

Dioxygen activation by copper complexes is a valuable method to achieve oxidation reactions for sustainable chemistry. The development of a catalytic system requires regeneration of the Cu^I active redox state from Cu^II. This is usually achieved using extra reducers that can compete with the Cu^II(O₂) oxidizing species, causing a loss of efficiency. An alternative would consist of using a photosensitizer to control the reduction process. Association of a Ru^II photosensitizing subunit with a Cu^II pre‐catalytic moiety assembled within a unique entity is shown to fulfill these requirements. In presence of a sacrificial electron donor and light, electron transfer occurs from the Ru^II center to Cu^II. In presence of dioxygen, this dyad proved to be efficient for sulfide, phosphine, and alkene catalytic oxygenation. Mechanistic investigations gave evidence about a predominant ³O₂ activation pathway by the Cu^I moiety.     

Impact of fluorine on the phase behavior of bis-p-tolyl propane in supercritical CO2, 1,1-difluoroethane,and 1,1,1,2-tetrafluoroethane

Fluorine substitution on a solute can have a significant effect on solute solubility in a given solvent and fluorine substitution on a solvent can also have a significant effect on solvent quality. The effect of fluorine is demonstrated with the phase behavior data for bis(p-tolyl)propane (BTP) compared to bis(p-tolyl)hexafluoropropane (BTHFP) in supercritical carbon dioxide, 1,1-difluoroethane (F152a), and 1,1,1,2-tetrafluoroethane (F134a). Semifluorinated BTHFP is more soluble than non-fluorinated BTP in all three solvents, especially CO₂. The CO₂–BTP system exhibits solid solubility behavior while the CO₂–BTHFP system exhibits liquid–liquid–vapor (LLV) behavior near the critical point of CO₂. Although the two dipolar hydrofluorocarbons (HFC) are better solvents than CO₂ for these two aromatic solid compounds, F152a is the superior HFC solvent, especially for BTP, because F152a has a smaller molar volume and a larger effective dipole moment than F134a. LLV behavior is also observed for the F134a–BTP system near the critical point of F134a although the F134a–BTHFP, F152a–BTP, and F152a–BTHFP systems all appear to exhibit type-I phase behavior and no liquid–liquid immiscibility near the respective critical points.     

Synthesis and structures of cadmium(II) complexes of a series of multinucleating N/S donor ligands

The coordination chemistry of a series of bis-bidentate ligands with cadmium(II) ions has been investigated. The ligands, containing two N,S-donor chelating (pyrazolyl/thioether) fragments, have afforded complexes of a variety of structural types (dinuclear M₂L₂ ‘mesocate’ complexes, a one-dimensional chain coordination polymer and a simple mononuclear complex) according to whether the bis-bidentate ligands act as bridges spanning two metal ions, or a tetradentate chelate to a single metal ion. The p-phenylene and m-biphenyl spaced ligands L¹ and L³ form dinuclear M₂L₂ complexes where the ligands are arranged in a ‘side-by-side’ fashion. In contrast the m-phenylene spaced ligand L² forms a one-dimensional coordination polymer where the ligands adopt a highly folded conformation. The 1,8-naphthalene spaced ligand L⁴ adopts a tetradendate chelating mode and affords a simple mononuclear complex.     

Synthesis and reactivity of thiophene palladium and thiophene dipalladium complexes with unsaturated molecules

Reactions of 2,5‐dibromothiophene, 1 , with [Pd₂(dba)₃]^?dba [Pd(dba)₂; dba = dibenzylideneacetone] in the presence of N‐donor ligands such as 2,2′‐bipyridine (bpy) and 4,4′‐di‐tert‐butyl‐2,2′‐bipyridine (dtbbpy) give arylpalladium complexes of cis‐[2‐(5‐BrC₄H₂S)PdBrL₂], 2a, b [L₂ = bpy ( 2a ), L₂ = dtbbpy ( 2b )], and cis‐cis‐L₂PdBr[2,5‐(C₄H₂S‐)PdBr(L₂)], 3a, b [L₂ = bpy ( 3a ), L₂ = dtbbpy ( 3b )]. Treatment of cis complexes 2a, b and 3a, b with CO causes the insertion of CO into the Pd? C bond to give the aroyl derivatives of palladium complexes of cis‐[2‐(5‐BrC₄H₂S)COPdBrL₂], 4a, b [L₂ = bpy ( 4a ), L₂ = dtbbpy ( 4b )], and cis‐cis‐[(L₂)(CO)BrPdC₄H₂S‐PdBr(CO)(L₂)], 5a, b [L₂ = bpy ( 5a ) and L₂ = dtbbpy ( 5b )], respectively. Treating complexes 2a, b with 1 mole equivalent of isocyanide XyNC (Xy = 2,6‐dimethylphenyl) gave iminoacyl complexes cis‐[2‐(5‐BrC₄H₂S)C?NXyPdBrL₂], 6a, b [L₂ = bpy ( 6a ), L₂ = dtbbpy ( 6b )], and a 3‐fold excess of isocyanide XyNC (Xy = 2,6‐dimethylphenyl) gave triiminoacyl complexes [2‐(5‐BrC₄H₂S)(C?NXy)₃ PdBr], 7 . Cyclization reactions of 6a, b with 3 mole equivalents of isocyanide XyNC (Xy = 2,6‐dimethylphenyl) or cyclization reaction of 7 with 1 mole equivalent of isocyanide XyNC (Xy = 2,6‐dimethylphenyl) both gave tetraiminoacyl complexes of [2‐(5‐BrC₄H₂S)(C?NXy)₄PdBr], 8 , which was also obtained by the reaction of 1 or 2a, b with a 4‐fold excess of isocyanide XyNC with or without add Pd(dba)₂. Similarly, complexes 3a and b were also reacted with 2 mole equivalents of isocyanide XyNC (Xy = 2,6‐dimethylphenyl) to give iminoacyl complexes cis‐cis‐[(L₂)(CNXy)BrPdC₄H₂S‐PdBr(CNXy)(L₂)], 10a, b [L₂ = bpy ( 10a ), L₂ = dtbbpy ( 10b )] and an 8‐fold excess of isocyanide XyNC (Xy = 2,6‐dimethylphenyl) afforded tetraiminoacyl complexes of [2,5‐(C₄H₂S)(C?NXy)₈Pd₂Br₂], 11 . Complexes 2a, b and 3a, b reacted with TlOTf [(TfO = CF₃SO₃)] in CH₂Cl₂ to give 9a, b and 12a, b , respectively, in a moderate yield. Copyright © 2007 John Wiley & Sons, Ltd.     

Measurement of microchannel fluidic resistance with a standard voltage meter

A simplified method for measuring the fluidic resistance (R_fluidic) of microfluidic channels is presented, in which the electrical resistance (R_elec) of a channel filled with a conductivity standard solution can be measured and directly correlated to R_fluidic using a simple equation. Although a slight correction factor could be applied in this system to improve accuracy, results showed that a standard voltage meter could be used without calibration to determine R_fluidic to within 12% error. Results accurate to within 2% were obtained when a geometric correction factor was applied using these particular channels. When compared to standard flow rate measurements, such as meniscus tracking in outlet tubing, this approach provided a more straightforward alternative and resulted in lower measurement error. The method was validated using 9 different fluidic resistance values (from ∼40 to 600 kPa s mm⁻³) and over 30 separately fabricated microfluidic devices. Furthermore, since the method is analogous to resistance measurements with a voltage meter in electrical circuits, dynamic R_fluidic measurements were possible in more complex microfluidic designs. Microchannel R_elec was shown to dynamically mimic pressure waveforms applied to a membrane in a variable microfluidic resistor. The variable resistor was then used to dynamically control aqueous-in-oil droplet sizes and spacing, providing a unique and convenient control system for droplet-generating devices. This conductivity-based method for fluidic resistance measurement is thus a useful tool for static or real-time characterization of microfluidic systems.     

SYNTHESIS OF SOME BICYCLIC THIAZOLO AND THIAZEPINOPYRIMIDINE DERIVATIVES

Thiazolo 3 a–c and oxothialo 5 a–b pyrimidine compounds were synthesized by a simple one-pot condensation reaction of the pyrimidine derivative i 1a and 1,2-dibromoethane i 2 or 2-bromopropanoic acid 4 . In a similar way the thiazepinopyrimidine compounds 7 (a–b) were synthesized by reaction of 1b and 1,4-dichlorobutane 6 in dimethylformamide under reflux condition. The yields of products following recrystallization were of the order of 60–80%.