Photophysical properties of rhodamine isomers: A two-photon excited fluorescent sensor for trivalent chromium cation (Cr)

We introduce a new rhodamine-based fluorescent chemosensor, FD8 which exhibits a distinct two-photon excited fluorescence (TPEF) on/off characteristic upon binding Cr³⁺ ions. By coordination with metal cation, conformation of FD8 changes from spirocyclic to open-ring, resulting in remarkable enhancement of absorption and fluorescence both in one- and two-photon excitations. As a result, a 29-fold enhancement of two-photon excited fluorescent intensity was observed when 10 eq. Cr³⁺ was added to the FD8 solution. The detection limit of Cr³⁺ cation concentration down to 1 μM (0.01 eq. of FD8) was achieved under our experimental condition. Besides the excitation within ultraviolet regime by fluorescence resonance energy transfer (FRET) mechanism, the TPEF on/off behavior further extends the excitation to near infrared regime (the biological optimal window of 700-1200 nm), and shows more effective sensitivity. The broad excitation wavelength, on/off fluorescence and high selectivity to Cr³⁺ enable FD8 to be a powerful Cr³⁺ cation sensor with potential application, especially in biological detection. To the best of our knowledge, this is the first report about two-photon fluorescent sensor for Cr³⁺ ions.     

Dansyl-styrylquinoline conjugate as divalent iron sensor

Synthesis and photophysical studies of a simple and efficient dansyl-styrylquinoline conjugate (DansSQ) which shows excellent selectivity toward Fe²⁺ over other transition metal ions including Fe³⁺ are described. The fluorescent emission of DansSQ at 450 nm was enhanced upon addition of Fe²⁺ in the presence of common interfering metal ions in background. These studies suggest that DansSQ could be used as fluorescent sensor for Fe²⁺.     

A new lawsone azo-dye for optical sensing of Fe3+ and Cu2+ and their DFT study

A new lawsone-based azo-dye 2-hydroxy-3-((pyridin-2-ylmethyl)diazenyl)naphthalene-1,4-dione (1) was synthesized and applied for sensing of metal ions. Receptor 1 showed selective fluorescent and colorimetric response for the detection of Cu²⁺ and Fe³⁺ over other tested metal ions. The fluorescence intensity of 1 was significantly quenched allowing detection of Fe³⁺ and Cu²⁺ down to 0.61 and 6.06 μM, respectively. The binding has been established by fluorescence spectroscopic method. Receptor 1 provided a 1?:?1 binding scaffold for recognition of Fe³⁺ and Cu²⁺ ions with the association constant of 3.33 × 10⁶ and 3.33 × 10⁵ M^?1, respectively. The B3LYP/6-31G/LANL2DZ method was employed for the optimization of 1 and 1·Fe³⁺ and 1·Cu²⁺.     

Novel naphthalene-based fluorescent chemosensors for Cu2+ and Fe3+ in aqueous media

Three novel compounds bearing 2,7-dihydroxylnaphthalene capable of detecting Cu²⁺ or Fe³⁺ have been synthesised based on photoinduced electron transfer. The ability of these compounds for complex transition metal ions has been studied, and complex stoichiometry for Cu²⁺ and Fe³⁺ complex has been determined in the Tris–HCl (0.01 M DMSO/H₂O (v/v) 1:1, buffer, pH 7.4) solution system by fluorescence titration experiments. These chemosensors form a 1:1 complex with Cu²⁺ or Fe³⁺ and show a fluorescent quenching with a binding constant of (4.46 ± 0.29) × 10³ and (8.04 ± 0.26) × 10⁴, respectively.     

An efficient and selective flourescent chemical sensor based on 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane as a new fluoroionophore for determination of iron(III) ions. A novel probe for iron speciation

A novel fluorescent chemical sensor for the highly sensitive and selective determination of Fe³⁺ ions in aqueous solutions is prepared. The iron sensing system was prepared by incorporating 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane (L) as a neutral Fe³⁺-selective fluoroionophore in the plasticized PVC membrane containing sodium tetraphenylborate as a liphophilic anionic additive. The response of the sensor is based on the strong fluorescence quenching of L by Fe³⁺ ions. At pH 5.5, the proposed sensor displays a calibration curve over a wide concentration range from 6.0 × 10⁻⁴ to 1.0 × 10⁻⁷ M, with a relatively fast response time of less than 2 min. In addition to a high stability and reproducibility, the sensor shows a unique selectivity toward Fe³⁺ ion with respect to common coexisting cations. The proposed fluorescence optode was applied to the determination of iron(III) content of straw of rice, spinach and different water samples. The fluorescent sensor was also used as a novel probe for Fe³⁺/Fe²⁺ speciation in aqueous solution.     

A naked-eye rhodamine-based fluorescent probe for Fe(III) and its application in living cells

A naked-eye turn-on fluorescent Fe³⁺ probe (RQ6) was developed by linking a new conjugated quinoline fluorescent group to the rhodamine platform. The probe can detect Fe³⁺ with high selectivity over other metal ions. Bioimaging studies indicated that RQ6 was cell permeable and suitable for detecting Fe³⁺ in the living cells by confocal microscopy.     

A highly selective fluorescent chemosensor for Fe (III) based on rhodamine 6G dyes derivative

A new fluorescent probe L based on the rhodamine 6G platforms for Fe³⁺ has been designed and synthesised. L showed excellent selectivity and high sensitivity for Fe³⁺ against other metal ions such as K⁺, Na⁺, Ag⁺, Cu²⁺, Co²⁺, Mg²⁺, Cd²⁺, Ni²⁺, Zn²⁺, Fe²⁺, Hg²⁺, Ce³⁺ and Y³⁺ in HEPES buffer (10 mM, pH 7.4)/CH₃CN (40:60, V/V). The distinct color change and the rapid emergence of fluorescence emission provided naked-eyes detection for Fe³⁺. The recognition mechanism of the probe toward Fe³⁺ was evaluated by Job’s plots, IR and ESI-MS. In order to further study their fluorescent properties, L + Fe³⁺ fluorescence lifetime was also measured. Moreover, the test strip results showed that these probes could act as a convenient and efficient Fe³⁺ test kit.     

A new Fe fluorescent chemosensor based on aggregation-induced emission

A new tetraphenylethylene (TPE)-based sensor M1 bearing double 2-methylpyridyl-2-methylthiophenylamino units linked with triazole moieties was reported. Both UV–vis and fluorescence spectroscopic studies demonstrated that M1 was highly sensitive and selective toward Fe³⁺ over other metal ions in THF/H₂O solution based on the aggregation-induced emission quenching mechanism. The lowest detection limit of M1 for Fe³⁺ is 0.7 μM. The detailed fluorescent titration study suggested that the binding stoichiometry of the M1–Fe³⁺ complex was 1:2, and the structure between M1 and the Fe³⁺ complex was confirmed by the ¹H NMR titration.     

An off-on fluorescent sensor with high selectivity and sensitivity for Fe(III)

A new fluorescent derivative (1) containing coumarin exhibits Fe(III)-selective strong yellow-green fluorescence in ethanol. This compound could be used as an “off-on” chemosensor and allow the detection of Fe³⁺ by monitoring changes in absorption and fluorescence spectra. Upon addition of Fe³⁺, an overall emission change of 125-fold was observed. High selectivity and sensitivity were observed over other metal ions, mainly due to the spirolactam ring-opening power of Fe³⁺. The detection limit was as low as 5.6?ppb. Photo-induced electron transfer, coupled with intramolecular charge transfer are proposed to account for the observed spectral response.     

Electrically induced fluorescence Fe sensing behavior of nanostructured Tiron doped polypyrrole

Nanostructured polypyrrole (PPy) film doped with Tiron was electrodeposited from aqueous solution on the surface of transparent electrode and used for sensitive, selective and rapid electrically controlled fluorescence detection of Fe³⁺ in aqueous media. The fluorescence intensity of PPy-Tiron film decreases linearly in the presence of Fe³⁺ by applying negative potential over a concentration range from 5.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol L⁻¹, with a relatively fast response time of less than 30 s at pH 7.4. The detection is not affected by the coexistence of other competitive metal ions such as Al³⁺, Ce³⁺, Tl³⁺, La³⁺, Bi³⁺, Cr²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺. The proposed electro-fluorescence sensor has a potential application to the determination of Fe³⁺ in environmental and biological systems. The fluorescent thin film sensor was also used as a novel probe for Fe³⁺/Fe²⁺ speciation in aqueous solution.     

Fine tuning of a solvatochromic fluorophore for selective determination of Fe: a new type of benzimidazole-based anthracene-coupled receptor

We synthesized a novel benzimidazole-based, anthracene-coupled fluorescent receptor capable of recognizing and estimating the concentrations of Fe³⁺ in semi-aqueous solution by ratiometric estimation. Our sensor can be made highly selective for Fe³⁺ over other metal ions by changing the solvent composition.     

‘On-Off’ reversible switch for Fe and F mimicking XNOR logic function

A new pyrene-appended chemosensor based on thiacalix[4]arene of 1,3-alternate conformation has been synthesised which demonstrates selective optical recognition of Fe³⁺ and F⁻ in two contrasting modes. The chemosensor behaves as a bifunctional fluorescent switch which mimics the performance of an exclusive-NOR (XNOR) logic gate with chemical inputs of Fe³⁺ and F⁻ ions.     

Sustainable and Green Synthesis of Waste-Biomass-Derived Carbon Dots for Parallel and Semi-Quantitative Visual Detection of Cr(VI) and Fe3+

Carbon dot (CD)-based multi-mode sensing has drawn much attention owing to its wider application range and higher availability compared with single-mode sensing. Herein, a simple and green methodology to construct a CD-based dual-mode fluorescent sensor from the waste biomass of flowers of wintersweet (FW-CDs) for parallel and semi-quantitative visual detection of Cr(VI) and Fe³⁺ was firstly reported. The FW-CD fluorescent probe had a high sensitivity to Cr(VI) and Fe³⁺ with wide ranges of linearity from 0.1 to 60 µM and 0.05 to 100 µM along with low detection limits (LOD) of 0.07 µM and 0.15 µM, respectively. Accordingly, the FW-CD-based dual-mode sensor had an excellent parallel sensing capacity toward Cr(VI) and Fe³⁺ with high selectivity and strong anti-interference capability by co-using dual-functional integration and dual-masking strategies. The developed parallel sensing platform was successfully applied to Cr(VI) and Fe³⁺ quantitative detection in real samples with high precision and good recovery. More importantly, a novel FW-CD-based fluorescent hydrogel sensor was fabricated and first applied in the parallel and semi-quantitative visual detection of Cr(VI) and ferrous ions in industrial effluent and iron supplements, further demonstrating the significant advantage of parallel and visual sensing strategies.     

A Selective Colorimetric and Fluorescent Chemodosimeter for Fe(III) Ion Based on Hydrolysis of Schiff Base

An efficient colorimetric and fluorescent chemodosimeter for Fe³⁺ ions has been developed. The visual and fluorescent behaviors of the receptor toward various metal ions were investigated. The receptor shows exclusive response toward Fe³⁺ ions and also distinguishes Fe³⁺ from other cations by color change and unusual fluorescence enhancement in aqueous solution (DMSO/H₂O = 4/1, v/v). Thus, the receptor can be used as a colorimetric and fluorescent sensor for the determination of Fe³⁺ ion. The visual color detection limit and the fluorescence detection limit of the receptor towards Fe³⁺ are (1.42 ± 0.01) × 10^‐6 M and (7.57 ± 0.04) × 10^‐8 M, respectively. The fluorescence microscopy experiments showed that the receptor is efficient for detection of Fe³⁺ in vitro, developing a good image of the biological organelles. The sensing mechanism is proven to be a hydrolysis process     

A fluorescent sensor based on quinazoline ketone derivatives for selectivity of Fe3+

In this work, we provided a fluorescent sensor based on a compound containing fluorophore quinazoline ketone for detecting metal ions. 2-Methyl-4(3 H)-quinazoline thione was synthesised as a fluorescent probe for tervalent ferric ion (Fe³⁺) detection. Fluorescent determination of 2-methyl-4(3 H)-quinazoline thione indicated its maximum emission wavelength of 306.5 nm. The fluorescence interference and titration experiments have shown that the compound has a high selective fluorescence response to Fe³⁺. With an increase in the Fe³⁺ ion concentration, the fluorescence emission strength gradually weakened, and a slight red shift appeared. With Job’s method, 2-methyl-4(3 H)-quinazoline thione was proved to form a 1:2 complex with Fe³⁺. The results revealed that 2-methyl-4(3 H)-quinazoline thione could be used as a fluorescent probe for the recognition of Fe³⁺ with high selectivity.     

Perimedine-linked rhodamine dye in visual sensing of Al3+, Fe3+ and Fe2+ ions in aqueous organic medium under different experimental conditions

ABSTRACT

Perimedine labelled rhodamine dye 1 has been designed and synthesised. Metal ion binding studies of 1 have been performed in CH₃CN/H₂O (3:1, v/v, 10 mM Tris-HCl buffer, pH = 6.90). Compound 1 senses multiple metal ions such as Al³⁺, Fe³⁺ and Fe²⁺ by exhibiting turn on fluorescence and colour change (colourless to pink) under different experimental conditions. Concentration variation distinguishes Al³⁺ from Fe³⁺ ion. At low concentration (c = 1 x 10^?4 M), only Al³⁺ ion can exhibit turn on fluorescence with sharp colour change. Sensing of Fe²⁺ ion through turn on fluorescence and colour change has been possible via in situ oxidation by following Fenton’s reaction.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

A ratiometric fluorescent probe for iron(III) and its application for detection of iron(III) in human blood serum

A simple and versatile ratiometric fluorescent Fe³⁺ detecting system, probe 1, was rationally developed based on the Fe³⁺-mediated deprotection of acetal reaction. Notably, this reaction was firstly employed to design fluorescent Fe³⁺ probe. Upon treatment with Fe³⁺, probe 1 showed ratiometric response, with the fluorescence spectra displaying significant red shift (up to 132 nm) and the emission ratio value (I₅₂₂/I₃₉₀) exhibiting approximately 2362-fold enhancement. In addition, the probe is highly sensitive (with the detection limit of 0.12 μM) and highly selective to Fe³⁺ over other biologically relevant metal ions. The sensing reaction product of the probe with Fe³⁺ was confirmed by NMR spectra and mass spectrometry. TD-DFT calculation has demonstrated that the ratiometric response of probe 1 to Fe³⁺ is due to the regulation of intramolecular charge transfer (ICT) efficiency. Moreover, the practical utility in fluorescence detection of Fe³⁺ in human blood serum was also conducted, and probe 1 represents the first ratiometric fluorescent probe that can be used to monitor Fe³⁺ level in human blood serum. Finally, probe 1 was further employed in living cell imaging with pancreatic cancer cells, in which it displayed low cytotoxicity, satisfactory cell permeability, and selective ratiometric response to Fe³⁺.     

Development of Fluorescent Film Sensors Based on Electropolymerization for Iron(III) Ion Detection

Two electroactive materials, M1 and M2 , are synthesized and their fluorescent electropolymerized (EP) films are prepared and used to detect metal ions. From the tested metal ions, M1 and M2 are demonstrated to be sensitive and selective for Fe³⁺ ions. In particular, M2 exhibits higher sensitivity towards Fe³⁺ ions. The fluorescent detection ranges from 10^?5 M to 4×10^?4 M . The excellent performance of the EP fluorescent films is mainly due to the strong metal‐chelated properties of M2 and the intrinsic porous cross‐linked‐network microstructure of the EP films. This study, thus, provides a promising Fe³⁺ sensing candidate and a potential preparation method for fluorescent sensing films.     

苯乙烯三嗪衍生物的合成及在重金属离子识别中的应用

合成了2,4-二(2-噻吩乙烯基)-6-(4'-N,N-二甲氨基苯乙烯基)-1,3,5-均三嗪(2)并鉴定了其结构。在乙腈-水混合介质中,化合物2在355和416nm处呈现双吸收峰,加入Cu²⁺,Hg²⁺ 和Fe³⁺ 后,均在520nm附近形成新的吸收峰。化合物2与Cu²⁺、Hg²⁺ 和Fe³⁺ 均形成1:1型配合物,其结合常数分别为1.9×10⁵L·mol^-1,6.6×10³L·mol^-1,2.7×10³L·mol^-1。对照化合物4与金属离子的光谱响应与化合物2相似,仅吸收峰的位置不同。因此,可认为化合物2和4中三嗪环中的N和噻吩环中的S与Cu²⁺、Hg²⁺ 和Fe³⁺ 共同配位形成了稳定的金属配合物。