Crystal structure and conformation of N,N′-bis (3,5-dichlorosalicylidene)-2-hydroxy 1,3 diamino-2-propan

N,N′-bis(3,5-dichlorosalicylidene)-2-hydroxy-1,3-diamino-2-propan (C₁₇H₁₄Cl₄N₂O₃) was synthesized and its crystal structure determined. It crystallizes in the monoclinic space group, C2/c, with a=29.734(8), b=4.541(1), c=14.694(2) Å, β=115.85(2), R(F²)=0.048 for 1704 independent reflections. The title compound has a twofold axis passing through the central C9 atom. The intramolecular hydrogen bond occurs between the pairs of atoms N1 and O1 [2.648(5) Å] and the hydrogen atom is essentially being bonded to the nitrogen atom. There is no intermolecular proximity between molecules. Conformations of the title compound were investigated by semi-empirical quantum mechanical AM1 calculations. The optimized geometry of the molecular structure corresponding to the non-planar conformation is the most stable conformation in the theoretical calculations. The results strongly indicate that the minimum energy conformation is primarily determined by non-bonded steric interactions.     

Copper(I) catalysis: Synthesis of N,N′-diarylated and N-aryl,N′-formylated chiral C2-symmetric diamines

Chiral N,N′-diaryl C₂-symmetric diamines and N-aryl,N′-formyl-trans-(1R,2R)-diaminocyclohexane are readily accessed by copper catalyzed N,N′-diarylation and N-aryl,N′-formylation of trans-(1R,2R)-diaminocyclohexane with aryl bromides. N,N′-diarylation using (R)-1,1′-binaphthyl-2,2′-diamine and iodobenzene gave the corresponding (R)-N,N′-diphenyl-1,1′-binaphthyl-2,2′-diamine derivative in 83% yield.     

Preparation of diarylamines by the addition of 4-(N,N-dimethylamino)phenyllithium to nitroarenes

The addition of 4-(N,N-dimethylamino)phenyllithium to nitroarenes in THF (−78°C) affords the corresponding diarylamines in one-pot and the reaction appears to be general in scope. A ‘nitroso’-based mechanism is proposed for this novel nitroreductive N-arylation reaction.     

Synthesis of N,N′-bis and N,N,N′,N′-tetra-[(3,5-di-substituted-1-pyrazolyl)methyl]para-phenylenediamines: new candidate ligands for metal complex wires

A series of tridentate ligands N,N-bis-[(di-substituted-1-pyrazolyl)methyl]arylamines 2-3a,b and benzylamine 4a,b, tetradentate N,N′-bis-[(di-substituted-1-pyrazolyl)methyl]para-phenylenediamines 7a,b and hexadentate N,N,N′,N′-tetra-[(di-substituted-1-pyrazolyl)methyl]para-phenylenediamines 8a,b has been prepared in good yield by condensation of arylamines, benzylamine or para-phenylenediamine with N-hydroxymethyl disubstituted pyrazoles 1a,b. The synthesis and characterisation of these various polydentate ligands are described.     

Synthesis of N,N-dialkylaminobenzonitriles and halo-(N,N-dialkyl)benzamidines by reaction of halobenzonitriles with lithium amides

3- and 4-N,N-Dialkylaminobenzonitriles and 4-chloro-(N,N-dialkyl)benzamidines were isolated by reacting 4-chlorobenzonitrile with hindered lithium amides under thermodynamic (0 °C) and kinetic control conditions (−78 °C), respectively. As previously reported, a benzyne mechanism seems to be confirmed since N,N-dialkylaminobenzonitriles are formed. Only benzamidines were isolated in fair to high yields at both 0 °C and −78 °C with non-hindered lithium amides. Exploitation and mechanistic rationale of the reaction of different halobenzonitriles are also reported.     

Synthesis and properties of N,N,N′,N′-tetrasubstituted 1,3-bis(5-aminothien-2-yl)azulenes and their application as a hole-injecting material in organic light-emitting devices

Two title compounds, N,N,N′,N′-tetraphenyl-1,3-bis(5-aminothien-2-yl)azulene (3a) and 1,3-bis{5-(9-carbazolyl)thien-2-yl}azulene (3b), were synthesized from 1,3-di(2-thienyl)azulene (4) by a two-step sequence involving bromination and subsequent Pd-catalyzed amination. These compounds were characterized by spectroscopic analyses and the structure of 3a was determined by X-ray crystallographic analysis. Their HOMO energy levels were estimated using their electrochemical oxidation potentials, and these compounds were used as a hole-injecting material in organic light-emitting devices. The device with 3a showed greater durability than that with copper phthalocyanine.     

Fluorsilylsubstituierte N,N- und N,O-bis(trimethylsilyl)-hydroxylamine

Fluoro- und aminofluoro-silanes react with the lithium salt of N,O-bis(trimethylsilyl)hydroxylamine under LiF elimination and substitution. Alkyl- and amino-fluorosilanes give O-fluorosilyl-N,N-bis(trimethylsilyl)hydroxylamines, arylfluorosilanes give N-fluorosilyl-N,O-bis(trimethylsilyl)hydroxylamines. By the further reaction of O-difluorosilyl-N,N-bis(trimethylsilyl)hydroxylamine with the lithiated hydroxylamine, O,O′-fluoromethylsilyldi[N,N-bis(trimethylsilyl)hydroxylamine] is formed. On heating N-difluorophenylsilyl-N,O-bis(trimethylsilyl)hydroxylamine di[fluorophenylsilyl(methyl)amino]pentamethylsiloxane is formed by methyl group migration. The NMR and mass spectra of the compounds are reported.     

Synthesis,electrochemistry and in situ spectroelectrochemistry of a new Co(III) thio Schiff-base complex with N,N′-bis(2-aminothiophenol)-1,4-bis(carboxylidene phenoxy)butane

A new cobalt Schiff-base complex, [Co(L)(OH)(H₂O)] (where L = [N,N′-bis(2-aminothiophenol)-1,4-bis(carboxylidene phenoxy)butane), was synthesized and its electrochemical and spectroelectochemical properties were investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and thin-layer spectro-electrochemistry in solutions of dimethyl sulfoxide (DMSO) and dichloromethane (CH₂Cl₂). The [Co(L)(OH)(H₂O)] complex displays two well-defined reversible reduction processes with the corresponding anodic waves. The half-wave potentials of the first and second reduction processes were displayed at E_1/2 = 0.08 V and E_1/2 = −1.21 V (scan rate: 0.100 Vs⁻¹) in DMSO, and E_1/2 = −0.124 V and E_1/2 = −1.32 V (scan rate: 0.100 Vs⁻¹) in CH₂Cl₂. The potentials of the reduction processes in DMSO are shifted toward negative potentials (0.220–0.112 V) compared to those in CH₂Cl₂. The electrochemical results are assigned to two one-electron reduction processes; [Co(III)L] + ⁻e → [Co(II)L]⁻ and [Co(II)L]⁻ + ⁻e → [Co(I)L]²⁻. The six-coordination of the complex remains unchanged during the reduction processes and the electron transfer processes were not followed by a chemical reaction upon scan reversal. It was also seen that [Co(L)(OH)(H₂O)] was reduced at a more positive potential than the corresponding salen analogs. The shift and reversibility are apparently related to the high degree of electron delocalization of the [Co(L)(OH)(H₂O)] complex, having a N₂O₂S₂ donor set and two additional benzene units. Additionally, in situ spectroelectrochemical measurements support Co(III)/Co(II) and Co(II)/Co(I) reversible reduction processes with the observation of the corresponding spectral changes with the applied potentials E_app = −0.40 and −1.60 V. Application of the spectroelectrochemical results allowed the determination ofE_1/2 and n (the number of electrons) from the spectra of the fully oxidized and reduced species in one unified experiment as well. The results obtained by this method are in agreement with those by the CV and DPV methods.     

Electrochemical and electrochromic properties of novel aromatic poly(amine-amide)s derived from N,N′-bis(4-carboxyphenyl)-N,N′-diphenyl-1,4-phenylenediamine

A series of novel triphenylamine-containing aromatic poly(amine-amide)s were prepared from the dicarboxylic acid, N,N′-bis(4-carboxyphenyl)-N,N′-diphenyl-1,4-phenylenediamine, and various diamines by direct phosphorylation polycondensation. All the poly(amine-amide)s were amorphous, soluble in a variety of organic solvents, and could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass-transition temperatures (195-280 °C). These polymers exhibited strong UV-Vis absorption bands at 330-346 nm and their photoluminescence showed maximum bands around 516-535 nm in NMP solution. The hole-transporting and electrochromic properties are examined by electrochemical and spectroelectrochemical methods. Cyclic voltammograms of the poly(amine-amide)s prepared by casting polymer solution onto an indium-tin oxide (ITO)-coated glass substrate exhibited two reversible oxidative redox couples at potential 0.73-0.78 V and 1.12-1.18 V, respectively vs Ag/AgCl in acetonitrile solution. All the poly(amine-amide)s exhibited excellent reversibility of electrochromic characteristics by continuous ten cyclic scans between 0.0 and 1.40 V, with a color change from original pale yellowish neutral form to the green and then to blue oxidized forms.     

Chiral N,N′-dioxide-Yb(III) complexes catalyzed enantioselective hydrophosphonylation of aldehydes

Chiral N,N′-dioxide-Ytterbium(III) complexes promoted the asymmetric addition of diethyl phosphate to aldehydes, giving the corresponding products with good yields and enantioselectivities. The addition of pyridine favored both reactivity and enantioselectivity. A possible catalytic cycle was proposed to explain the mechanism of the asymmetric hydrophosphonylation of aldehydes.     

Synthesis of B-trisubstituted borazines via the rhodium-catalyzed hydroboration of alkenes with N,N′,N″-trimethyl or N,N′,N″-triethylborazine

Hydroboration of terminal and internal alkenes with N,N′,N″-trimethyl- and N,N′,N″-triethylborazine was carried out at 50 °C in the presence of a rhodium(I) catalyst. Addition of dppb or DPEphos (1 equiv.) to RhH(CO)(PPh₃)₃ gave the best catalyst for hydroboration of ethylene at 50 °C, resulting in a quantitative yield of B,B′,B″-triethyl-N,N′,N″-trimethylborazine. On the other hand, a complex prepared from (t-Bu)₃P (4 equiv.) and [Rh(coe)₂Cl]₂ gave the best yield for hydroboration of terminal or internal alkenes.     

Aerobic oxidation of trimethylbenzenes catalyzed by N,N′,N″-trihydroxyisocyanuric acid (THICA) as a key catalyst

The oxidation of trimethylbenzenes was examined with air or O₂ using N,N′,N″-trihydroxyisocyanuric acid (THICA) as a key catalyst. Thus, 1,2,3-, 1,2,4-, and 1,3,5-trimethylbenzenes under air (20 atm) in the presence of THICA (5 mol %), Co(OAc)₂ (0.5 mol %), Mn(OAc)₂, and ZrO(OAc)₂ at 150 °C were oxidized to the corresponding benzenetricarboxylic acids in good yields (81-97%). In the aerobic oxidation of 1,2,4-trimethylbenzene by the THICA/Co(II)/Mn(II) system, remarkable acceleration was observed by adding a very small amount of ZrO(OAc)₂ to the reaction system to form 1,2,4-benzenetricarboxylic acid in excellent yield (97%). In contrast, no considerable addition effect was observed in the oxidation of 1,3,5-trimethylbenzene. This aerobic oxidation by the present catalytic system provides an economical and environmentally benign direct method to benzenetricarboxylic acids, which are very important polymer materials.     

Copper(0)-induced aminocyclopropanation of olefins via deselenation of N,N-disubstituted aromatic selenoamides

Upon heating of a mixture of N,N-disubstituted aromatic selenoamides and several electron-deficient olefins in the presence of copper(0) powder, a novel deselenative cyclopropanation takes place to afford the corresponding aminocyclopropanes in good yields. When acrylonitrile is employed as an electron-deficient olefin, the aminocyclopentanation occurs in preference to the aminocyclopropanation by prolonging the reaction time. The obtained aminocyclopropane derivatives can be converted to the corresponding 1,4-dicarbonyl compounds upon treatment with 2 N HCl.     

Synthesis of 1,3-bis(N,N-difluoroamino)adamantane: addition of difluoramino radicals to 1,3-dehydroadamantane

1,3-Dehydroadamantane undergoes a facile reaction with tetrafluorohydrazine to give 1,3-bis(N,N-difluoroamino)adamantane, the product of 1,3-NF₂ radical addition.     

Synthesis and characterization of new soluble and thermally stable aromatic poly(amide-imide)s based on N-[3,5-bis(N-trimellitoyl)phenyl]phthalimide

A new dicarboxylic acid, N-[3,5-bis(N-trimellitoyl)phenyl]phthalimide (1a), bearing three preformed imide rings was synthesized from the condensation of N-(3,5-diaminophenyl)phthalimide and trimellitic anhydride in glacial acetic acid at 1:2 molar ratio. For study of structure-properties relationship 1,3-bis(N-trimellitoyl)benzene (1b, as a reference) was also synthesized in a similar manner. 1a and 1b were characterized by spectroscopic methods and elemental analyses.A series of wholly aromatic poly(amide-imide)s with inherent viscosities of 0.63-1.09 dl g⁻¹ was prepared by triphenyl phosphite-activated polycondensation from the triimide-dicarboxylic acid 1a and the reference monomer 1b with various aromatic diamines. All of the polymers were fully characterized by FT-IR and ¹H NMR spectroscopy. The effects of the phthalimide pendent group on the polymers properties such as solubility, crystallinity, and thermal stability were investigated by comparison of the polymers. The polymers obtained from triimide-dicarboxylic acid 1a exhibited excellent solubility in a variety of solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, N,N-dimethylformamide, and dimethylsulfoxide. These poly(amide-imide)s possessed glass-transition temperatures from 334 to 403 °C and exhibited excellent thermal stabilities and had 10% weight losses from 541 to 568 °C under a nitrogen atmosphere. Poly(amide-imide)s containing phthalimide pendent groups showed higher solubility, higher T_g and T_d10% values than those having no phthalimide pendent groups.     

Tri- and diorganostannates containing 2-(N,N-dimethylaminomethyl)phenyl ligand

The C,N-chelated tri and diorganotin(IV) chlorides react with both protic mineral acids and carboxylic acids. The nitrogen atom of the L^CN ligand (where L^CN is 2-(dimethylaminomethyl)phenyl) is thus quarternized - protonated and new Sn-X bond (X = Cl, Br, I or the remainder of the starting acid used) is simultaneously formed. The set of zwitterionic tri and diorganostannates containing protonated 2-(dimethylaminomethyl)phenyl-moiety was prepared and structurally characterized by multinuclear NMR spectroscopy and XRD techniques. In all these cases, the intramolecular N-H?X bond is present in the molecule. Despite the central tin atom remains five-coordinated (except for the [HL^CNH]⁺[(n-Bu)₂SnCl(NO₃)₂]⁻) and reveals a distorted trigonal bipyramidal geometry, the ¹¹⁹Sn NMR chemical shift values of these zwitterionic stannates are somewhat shifted to the higher field than corresponding starting C,N-chelated tri and diorganotin(IV) halides. Reactions of C,N-chelated organotin(IV) halides with various Lewis acids are also discussed.     

Poly(N-bromobenzene-1,3-disulfonamide) and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide as novel catalytic reagents for silylation of alcohols, phenols, and thiols using hexamethyldisilazane

Poly(N-bromobenzene-1,3-disulfonamide) [PBBS] and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide [TBBDA] are effective catalysts for the silylation of alcohols, phenols, and thiols in the presence of hexamethyldisilazane with, or without solvent, and also under microwave irradiation.     

Electrochemical fluorination of N,N-dimethylperfluoroacylamides

The electrochemical fluorination (ECF) of N,N-dimethylperfluoroacylamides gives the corresponding perfluoro-N,N-dimethylacylamides in low yield. With increase of the number of carbon atoms in the perfluoroacyl radical the yield of the required perfluoro-N,N-dimethylacylamides is slightly increased.     

N,N-Dimethylethylenediamine in direct and direct template syntheses of Cu(II)/Cr(III) complexes

Four new heterometallic Cu(II)/Cr(III) complexes with N,N-dimethylethylenediamine (dmen) and its novel Schiff-base derivatives, N′-[(1Z)-3-amino-1,3-dimethylbutylidene]-N,N-dimethylethane-1,2-diamine (dmenac) and N′-((1Z)-3-{[2-(dimethylamino)ethyl]amino}-1,3-dimethylbutylidene)-N,N-dimethylethane-1,2-diamine (dmen₂ac), have been easily prepared by self-assembly and characterized by spectroscopic methods and single crystal X-ray analysis. The structures of all the complexes are assisted by numerous hydrogen bonds that provide a web of interactions and mould the supramolecular architectures of the compounds. Variable-temperature (1.8–300 K) magnetic susceptibility measurements reveal Curie-Weiss paramagnetic behavior of all the compounds, supported by EPR studies.