CeCl3·7H2O/IBX-promoted oxidation of 3-alkylindoles to 3-hydroxyoxindoles

3-Alkylindoles undergo smooth oxidation with IBX in the presence of CeCl₃·7H₂O in aqueous acetonitrile at ambient temperature to afford the corresponding 3-hydroxyoxindoles in high yields. This method is very useful for the direct preparation of 3-hydroxyoxindoles from 3-alkylindoles. Operational simplicity, mild and neutral reaction conditions in aqueous solution are the key features of this protocol.     

CeCl3·H2O/NaI-Promoted stereoselective synthesis of 2,4-disubstituted chiral tetrahydroquinolines

d-Glycals readily undergo cyclization with aryl amines in the presence of CeCl₃·7H₂O-NaI under mild and neutral conditions to afford a novel sugar derived tetrahydroquinoline derivatives in good yields with high stereoselectivity. The stereochemistry of the products was assigned by using various NMR studies.     

Catalytic oxidation of thiols to disulfides using iodine and CeCl3·7H2O in graphite

A very simple procedure for the efficient oxidation of thiols to disulfides catalyzed by I₂/CeCl₃·7H₂O in graphite and ethyl acetate as the solvent, in an open system at room temperature is described. The reaction proceeds cleanly under mild conditions and was performed with aromatic, aliphatic, and heterocyclic thiols.     

Glycerin and CeCl3·7H2O: a new and efficient recyclable medium for the synthesis of bis(indolyl)methanes

Glycerin and CeCl₃·7H₂O were successfully used in recyclable catalytic system for the synthesis of several bis(indolyl)methanes in good to excellent yields through the reaction of indoles with aldehydes. The method is applicable to aliphatic and aromatic aldehydes, and the mixture of glycerin and CeCl₃·7H₂O can be reused up to five times without special treatment and with comparable yields.     

The first example of the C-3 alkylation of indoles with cyclopropyl ketones promoted by CeCl3·7H2O/LiI

Indoles undergo smooth alkylation with cyclopropyl ketones in the presence of the CeCl₃·7H₂O/LiI reagent system in refluxing acetonitrile under neutral conditions to produce the corresponding C-3 substituted indole derivatives in good to high yields and with high selectivity. The use of CeCl₃·7H₂O/LiI makes this method simple, convenient, and cost-effective.     

CeCl3·7H2O-NaI catalyzed intramolecular addition reactions of 7-hydroxy-1,3-dienes: a facile approach to hexahydrobenzofurans and tetrahydrofurans

CeCl₃·7H₂O-NaI effectively catalyzed intramolecular cyclization of cyclic 7-hydroxy-1,3-dienes, yielding hexahydrobenzofurans in diastereoselective fashion. This cyclization has been applied to synthesize tetrahydrofurans from acyclic 7-hydroxy-1,3-dienes.     

Modular CeCl3·7H2O-catalyzed multi-component synthesis of 1,2,3,4-tetrasubstituted pyrroles under microwave irradiation and their further trichloroisocyanuric acid-mediated conversion into 5-sulfenylpyrrole derivatives

A modular, multicomponent synthesis of 1,2,3,4-tetrasubstituted pyrroles promoted by the inexpensive CeCl₃·7H₂O, is reported. The reaction was carried out under microwave irradiation, affording good yields of products in short time. Scope and limitations were explored and a plausible reaction mechanism is discussed. The resulting heterocycles were smoothly and efficiently converted into their corresponding 5-arylsulfenyl derivatives by reaction with diaryl disulfides and trichloroisocyanuric acid in EtOAc.     

Crystal growth of Ce2O(CO3)2·H2O in aqueous solutions: Film formation and samarium doping

Crystalline cerium oxide carbonate hydrate (Ce₂O(CO₃)₂·H₂O) was grown in aqueous solutions at a low temperature of 80 °C under ambient pressure. When cerium nitrate was used as a starting material, large Ce₂O(CO₃)₂·H₂O particles were precipitated through homogeneous nucleation and subsequent fast crystal growth. In contrast, the usage of cerium chloride was found to promote the preferential precipitation of Ce₂O(CO₃)₂·H₂O on foreign substrates through heterogeneous nucleation and slow crystal growth. This phenomenon was applied to a chemical bath deposition of Ce₂O(CO₃)₂·H₂O films. Immersion of glass substrates in the solution at 80 °C for typically 24 h resulted in formation of solid films with a unique morphology like a micrometer-scale brush. It was also found that samarium could be incorporated into Ce₂O(CO₃)₂·H₂O during the crystal growth in the solutions, as evidenced by characteristic photoluminescence of Sm³⁺ in heating products of CeO₂. These results suggest that rare-earth oxide carbonate hydrates with a variety of compositions and morphologies can be synthesized from the aqueous solutions.     

The reaction of MgCl2·4H2O with CCl2F2

A new reaction of MgCl₂·4H₂O with CCl₂F₂ is investigated by DTA and TG from room temperature to 350 °C. It is observed that MgF₂ was obtained between 252 and 350 °C, Below the temperature, MgCl₂·4H₂O dehydrates and hydrolyzes to MgCl₂ and Mg(OH)Cl, which are the real reactants of the reaction with CCl₂F₂. The formation of MgF₂ is ascribed to the reaction of MgCl₂ and Mg(OH)Cl with HF, which forms by decomposition of CCl₂F₂ with the taking part in of H₂O released from dehydration of hydrated magnesium chloride on the surface of MgCl₂ and Mg(OH)Cl, which catalyzes the decomposition of CCl₂F₂ in this case. Consequently, the reactions are tested in the fluid-bed condition. It is found that MgF₂ formed at temperatures down to 200 °C in a fluid-bed reactor. This reaction may be used as a method of disposing of the environmentally sensitive CCl₂F₂ (rather than release into the atmosphere). It is also a method for the preparation of MgF₂.     

CeCl3·7H2O: a highly efficient catalyst for the synthesis of 1-substituted-octahydro-[1,3,2]diazaphospholo[1,5-a]pyridine-1-oxide

An efficient and simple protocol is reported for the synthesis of a new class of 1-substituted-octahydro-[1,3,2]diazaphospholo[1,5-a]pyridine-1-oxides in good to excellent yield (88–95%) via Michaelis–Arbuzov rearrangement. Condensation of diamido phosphite with various halides at 60 °C using CeCl₃·7H₂O as a highly efficient catalyst afforded the products within a short period of reaction time. This procedure is mild, efficient, and non-toxic and stability of the catalyst is the merit of this process. Therefore, this protocol being environmentally benign and efficient, serves as an alternative procedure for the preparation of the title compounds.     

Vibrational spectra of Cs2CaCl4·2H2O

The Fourier transform infrared spectra of Cs₂CaCl₄·2H₂O as well as those of a series of its partially deuterated analogues were recorded at room and at liquid-nitrogen temperature (RT and LNT, respectively). The RT Raman spectra of the protiated form and of its almost completely deuterated analogue were also studied. The combined results from the analysis of the spectra were used to assign the observed bands. The mechanical anharmonicity of the OH(D) stretching and bending motions were further analyzed by computing the corresponding anharmonicity constants by several algorithms. The obtained trends in the series of structurally similar compounds were discussed.     

The CeCl3·7H2O-NaI system as promoter in the synthesis of functionalized trisubstituted alkenes via Knoevenagel condensation

The arylidene malonates with two different geminal carboxylate functions, a suitable class of substrates of several synthetic and pharmacological studies, are easily available through Knoevenagel condensation of ethyl tert-butyl malonate and different aromatic aldehydes. The results have increased the potentialities of CeCl₃·7H₂O-NaI system as a type of water-tolerant green Lewis acid promoter for carbon-carbon bond forming procedures.     

A novel three-dimensional inorganic framework: hydrothermal synthesis and crystal structure of CuMo3O10·H2O

A novel three-dimensional inorganic bimetallic compound Cu[Mo₃O₁₀]·H₂O 1 has been hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction. Compound 1 crystallizes in the orthorhombic system, space group Pnma, a=8.6085(17) Å, b=7.5822(15) Å, c=13.690(3) Å, V=893.6(3) Å³, Z=4, λ(MoKα) = 0.71073 Å (R(F)=0.0357 for 1101 reflections). The structure of compound 1 is based on [{Mo₃O₁₀}²⁻]_∞ isopolyoxomolybdate chains bonded together with CuO₄ tetrahedra into a three-dimensional inorganic open framework. Three types of Mo-Cu layers and one-dimensional tunnels are observed in the title compound.     

Nd(Gly)2Cl3·3H2O和Pr(Ala)3Cl3·3H2O的热力学性质

利用精密自动绝热热量计测定了Nd(Gly)₂Cl₃·3H₂O在80-357K和Pr(Ala)₃Cl₃·3H₂O在80-374K温区的热容. 根据两个化合物的热容计算出了相对于参考温度298.15K的热力学函数(H_T?H_298.15)和(S_T?S_298.15). 根据热重(TG)分析结果, 提出了这两个稀土化合物可能的热分解机理. 利用溶解-反应恒温热量计测定相关化合物的溶解焓并设计盖斯热化学循环, 计算出了两个化合物的标准摩尔生成焓.     

Two layered gallophosphates assembled about the chiral metal complexes: Co(en)3·Ga3P4O16·5H2O and trans−Co(dien)2·Ga3P4O16·3H2O

Two new layered gallophosphates Co(en)₃·Ga₃P₄O₁₆·5H₂O (1) and trans-Co(dien)₂·Ga₃P₄O₁₆·3H₂O (2) have been hydrothermally synthesized using the racemic mixture of chiral metal complex Co(en)₃Cl₃ and Co(dien)₂Cl₃ as the structure-directing agent, respectively. Their structures are determined by single-crystal X-ray diffraction analysis and further characterized by X-ray power diffraction, ICP, elemental, and TG analyses. The structures of 1 and 2 consist of vertex-linking GaO₄ and PO₃(=O) tetrahedral units forming macroanionic [Ga₃P₄O₁₆]³⁻ sheets with a 4.6-net. The 4.6-net is characteristic of chiral [3.3.3] propellane-like structural motifs. The sheets of 1 stack in an ABAB sequence, with a pair of enantiomers of chiral Co(en)₃³⁺ cations residing in the interlayer region. The sheets of 2 array in a helical fashion with an ABCDEF stacking sequence, with only one enantiomer of chiral Co(dien)₂³⁺ cations residing in the interlayer region. Structural elucidation of 1 and 2 reveals that there exist stereo-specific correspondence between the metal complex template and the structure of the inorganic host. Crystal data: 1, Co(en)₃·Ga₃P₄O₁₆·5H₂O, orthorhombic, Pnna (No. 52), a=8.6618(2) Å, b=21.6071(5) Å, c=13.7426(4) Å, Z=4, R₁=0.0337 (I>2σ(I)), wR₂=0.0985 (all data); 2, Co(dien)₂·Ga₃P₄O₁₆·3H₂O, hexagonal, P6₅22 (No. 179), a=8.5152(7) Å, b=8.5152(7) Å, c=63.278(8) Å, R₁=0.1183 (I>2σ(I)), wR₂=0.2864 (all data) and Z=6.     

Two Ce(SO4)2·4H2O polymorphs: Crystal structure and thermal behavior

Syntheses, crystal structures and thermal behavior of two polymorphic forms of Ce(SO₄)₂·4H₂O are reported. The first modification, α-Ce(SO₄)₂·4H₂O (I), crystallizes in the orthorhombic space group Fddd, with a=5.6587(1), b=12.0469(2), c=26.7201(3) Å and Z=8. The second modification, β-Ce(SO₄)₂·4H₂O (II), crystallizes in the orthorhombic space group Pnma, with a=14.6019(2), b=11.0546(2), c=5.6340(1) Å and Z=4. In both structures, the cerium atoms have eight ligands: four water molecules and four sulfate groups. The mutual position of the ligands differs in (I) and (II), resulting in geometrical isomerism. Both these structures are built up by layers of Ce(H₂O)₄(SO₄)₂ held together by a hydrogen bonding network. The dehydration of Ce(SO₄)₂·4H₂O is a two step (I) and one step (II) process, respectively, forming Ce(SO₄)₂ in both cases. During the decomposition of the anhydrous form, Ce(SO₄)₂, into the final product CeO₂, intermediate xCeO₂·yCe(SO₄)₂ species are formed.     

CeCl3·7H2O: an efficient and reusable catalyst for the preparation of β-acetamido carbonyl compounds by multi-component reactions (MCRs)

A convenient method for the preparation of β-acetamido carbonyl compounds is described by multi-component reactions of aromatic aldehydes, enolizable ketones or β-keto esters and acetonitrile in the presence of acetyl chloride and 10 mol % CeCl₃·7H₂O at room temperature.     

A solvothermal synthesis and characterization of a new open-framework K4Ag2Ge3S9·H2O

A novel framework K₄Ag₂Ge₃S₉·H₂O was synthesized solvothermally in the presence of a chelating agent of HSCH₂CH(SH)CH₂OH. Its structure was determined by single-crystal X-ray diffractometry. This material crystallizes in the orthorhombic space group Pna2(1) (No. 33) with a=14.4524(4) Å, b=9.6339(3) Å, c=16.5636(9) Å, z=4, R₁=0.0292, wR₂=0.0624 for all data. The structure comprises of adamantane-like clusters [AgGe₃S₉]⁵⁻ linked by Ag+ ions to form a open-framework, and potassium ions and water molecules are located in the channels. Its IR and thermal properties were investigated.     

Syntheses and structures of three new scandium selenites: Sc2(SeO3)3·H2O, Sc2 (SeO3)3·3H2O and CsSc3(SeO3)4 (HSeO3)2·2H2O

Three new hydrated scandium selenites have been hydrothermally synthesized as single crystals and structurally and physically characterized. Sc₂(SeO₃)₃·H₂O crystallizes as a new structure type containing novel ScO₇ pentagonal bipyramidal and ScO₆₊₁ capped octahedral coordination polyhedra. Sc₂(SeO₃)₃·3H₂O contains typical ScO₆ octahedra and is isostructural with its M₂(SeO₃)₃·3H₂O (M=Al, Cr, Fe, Ga) congeners. CsSc₃(SeO₃)₄(HSeO₃)₂·2H₂O contains near-regular ScO₆ octahedra and has essentially the same structure as its indium-containing analogue. All three phases contain the expected pyramidal [SeO₃]^2- selenite groups. Crystal data: Sc₂(SeO₃)₃·3H₂O, M_r=524.85, trigonal, R3c (No. 161), , , , Z=6, R(F)=0.018, wR(F²)=0.036; Sc₂(SeO₃)₃·H₂O, M_r=488.82, orthorhombic, P2₁2₁2₁ (No. 19), , , , , Z=4, R(F)=0.051, wR(F²)=0.086; CsSc₃(SeO₃)₄(HSeO₃)₂·2H₂O, M_r=1067.60, orthorhombic, Pnma (No. 62), , , , , Z=4, R(F)=0.035, wR(F²)=0.070.     

In(OTf)3-catalyzed synthesis of 4-thiocyanotetrahydropyrans via a three-component reaction

A three-component coupling of aldehydes, homoallylic alcohols and ammonium thiocyanate is achieved in the presence of 10 mol % of In(OTf)₃ in refluxing dichloromethane to produce 4-thiocyanotetrahydropyrans in excellent yields with all cis-selectivity. This method is simple, selective and convenient for introducing an SCN group onto a tetrahydropyran ring.