A picolinate-N2 complex of rhenium, the first dinitrogen complex bearing a carboxylate or a N,O-ligand

A new dinitrogen rhenium(I) complex with a picolinate ligand has been prepared and fully characterized, providing the first example of a genuine NN complex bearing a carboxylate or a N,O-coligand. The Lever electrochemical E_L ligand parameter was estimated for the first time for the picolinate ligand and shows that its carboxylate arm has a net electron-donor character similar to that of chloride, thus stabilizing the trans Re-N₂ bond.     

Effects of side-chains ofN-acetylamino acids on the structures of their triphenyltin(IV) complexes

Triphenyltin(IV) complexes ofN-acetylglycine,N-acetyl-L-leucine,N-acetyl-L-asparagine andN-acetyl-L-tyrosine were prepared by two methods and characterized by means of different spectroscopic methods (FTIR, multinuclear,¹H,¹³C and¹¹⁹Sn NMR and¹¹⁹Sn Mössbauer). The spectroscopic data indicated that theN-acetylglycine complex adopts a trigonal-bipyramidal structure in which the monodentate carboxylate and the amide-C=O group are bound to the same organotin(IV) moiety. The other three complexes are linear oligomers in which the planar Ph₃Sn(IV) is coordinated axially by a monodentate carboxylate and an amide-C=O from two different ligands. At theC-terminal end of the oligomer chain there is a tetracoordinated tin(IV) with a monodentate carboxylate as donor group.     

Characterization of 11-mercaptoundecanoic and 3-mercaptopropionic acids adsorbed on silver by surface-enhanced Raman scattering

Functionalized n-alkanethiols such as 11-mercaptoundecanoic (MUA) and 3-mercaptopropionic (MPA) acids are likely to adsorb in silver nanoparticles (AgNPs) solely through the thiol group (-SH) or also involving the carboxylate group (−COO⁻) in their structures. The relative tendency is closely related to pH conditions, solvent or the surface potential of the metallic nanoparticles. The SERS effect (Surface Enhancement Raman Scattering) was used for improving the understanding of MUA and MPA group interaction as well as the orientation of these organic compounds adsorbed on AgNPs and the influence of Cu(II) in solution. When analyzing the MPA SERS spectrum, it was verified that the thiol moiety was preferred to adsorb on the AgNPs surface in the thiolate form, presenting both anti and gauche conformations in both acidic and basic media. MUA SERS spectrum however, indicated that solely an anti conformation for the thiol moiety adsorbed on the AgNPs surface in both acidic and basic media. Adding Cu²⁺ ion resulted in coordination to the carboxyl or carboxylate moieties was confirmed by the downshift of the band assigned to OCO stretching. The presence of Cu(II) increased the tendency of gauche conformation for MPA; the coordination of MUA to Cu(II) resulted in a more upright conformation of the carboxylic/carboxylate moieties in both acidic and basic media, respectively.     

Photophysical properties of unsymmetric meso-substituted porphyrins synthesized via the Suzuki coupling reaction

A new family of porphyrins containing different groups in meso positions was synthesized by Suzuki coupling reaction of meso mono- and dibromo-diarylporphyrins with several boronate esters, catalyzed by palladium organometallic complexes. These procedures gave high yields of unsymmetric porphyrins bearing carboxylate anchoring groups, with enhanced absorptions in the red and showing no tendency for aggregation in toluene or THF solutions. Such properties are of interest for application in dye-sensitized solar cells.     

Consequences of acceptor effects on the polarization of oxo and imine bonds in acyl compounds: Part II. Semicarbazones CH3-C(=N-NH-CO-NH2)X and R-C(=N-NH-CO-NH2)-COOH. analysis of acid-base equilibria antecedent to reduction at the dropping mercury electrode

It is usually assumed that in α ketonic acids, recombination currents at the DME pertain to the carboxylate group. A comparison of the cathode half-wave potentials and the ratio ΔE_1/2/Δ pH obtained for semicarbazones R-C(=N-NH-CO-NH₂)-COOH leads to a different conclusion. If R=H (glyoxylate) or C₆H₅ (phenylglyoxylate), the results are in agreement with the usual hypothesis. On the contrary, if R=CH₃ (pyruvate), as the pH increases, the cessation of antecedent protonation occurs first at the carboxylate, and then at the imine group.     

Reductive alkylation of 2-methoxybenzoic acid derivatives

Metal-ammonia reduction followed by in situ alkylation of 2-methoxybenzoic acids often results in substantial loss of the methoxy substituent; reduction of the carboxylate salts or esters, however, suppresses this side reaction and good to excellent yields of desired products are then obtained.     

A versatile method for the hydrolysis of gem-dibromomethylarenes bearing carboxylate or boronate group into aldehydes

Hydrolysis of gem-dibromomethylarenes bearing carboxylate or boronate group to corresponding aldehydes without affecting the ester group was successfully accomplished in high yields by subjecting them to refluxing pyridine. Both aromatic and heteroaromatic substrates gave the corresponding aldehydes in good yields. This method was efficiently adapted for the large scale synthesis of 2d and 2f.     

Regioselective synthesis of pyridines and dihydropyridines derived from β-amino acids and aminophosphonates by reaction of N-vinylic phosphazenes with α,β-unsaturated ketones

Reaction of N-vinylic phosphazenes with α,β-unsaturated ketones leads to the formation of pyridines derived from β-amino acids in a regioselective fashion. The use of functionalized enones derived from α-acylstyryl-carboxylates or -phosphonates affords biologically active asymmetrical and symmetrical dihydropyridines substituted with carboxylate or phosphonate groups including nitrendipine, felodipine, MRS 1097, and efonidipine analogs.     

Catalyst free synthesis of mono- and disubstituted pyrimidines from O-acyl oximes

Transition-metal or iodine catalyzed transformations of O-acyl oximes to various N-heterocycles are well established. Herein, we report a catalyst free, oxime carboxylate based, three-component condensation method to access mono- and disubstituted pyrimidines. A broad range of substituted pyrimidines were prepared in moderate to excellent yields. Control experiments reveal that in situ generated formamidine is the key intermediate.     

A synthesis of bicyclo[n.1.0]alkanes having tert-butyl carboxylate or acetamide moiety via the intramolecular 1,3-CH insertion of magnesium carbenoids

Treatment of 1-chlorovinyl p-tolyl sulfoxides, derived from various cyclic ketones and chloromethyl p-tolyl sulfoxide, with lithium enolate of carboxylic acid tert-butyl esters or N,N-dimethylacetamide gave adducts in high yields. The adducts were treated with ether solution of isopropylmagnesium chloride in dry toluene to give bicyclo[n.1.0]alkane derivatives having tert-butyl carboxylate or acetamide moiety on the bridgehead carbon in high to quantitative yields via magnesium carbenoid 1,3-CH insertion reaction. The 1,3-CH insertion reaction proved to be regioselective and stereospecific. The reaction mechanism and origin of the selectivity and specificity are discussed.     

Semireduction of alkynoic acids via a transition metal-free α borylation-protodeborylation sequence

A method for the semi-reduction of alkynoic acids through an α-borylation and subsequent protodeborylation mechanism has been developed. The transition metal-free protocol is achieved through the activation of bis(pinacolato)diboron by an in situ generated carboxylate moiety yielding aryl acrylic acids. Our studies demonstrate an unprecedented dual role for the carboxylate anion that involves the activation of the diboron reagent and a directing effect in the α-borylation.     

The binding of Ca2+ and Mg2+ to human serium albumin: A calorimetric study

The binding of calcium and magnesium to human serum albumin has been studied in the pH region 2.5–8.0 by a calorimetric procedure. Both metal ions bind to the carboxylate groups of albumin. 36 and 44 carboxylate groups appear to be involved in the binding of Ca²⁺ and Mg²⁺, respectively. Based on previously reported results that twelve Ca²⁺ ions are the maximum which can bind to albumin, the results given here support previous X-ray crystallographic evidence that three carboxylate groups can be involved in the binding of a Ca²⁺ by a protein. The data also confirm that Ca²⁺ and Mg²⁺ binding is competitive. Binding of the cations to the carboxylate groups appears to involve the breaking of carboxylate-imidazole hydrogen bonds in the protein. Log K, ΔH and ΔS values obtained for the binding of metal ions to albumin in aqueous solution at 25°C are 2.72 ± 0.02, 0.0 ± 0.1 kcal/mole, and 12.4 ± 0.3 cal/mole K for Ca²⁺ and 1.12 ± 0.05, ?0.2 ± 0.1 kcal/mole, and 4.5 ± 0.3 cal/mole K for Mg²⁺, respectively.     

Synthesis, structure, and magnetic properties of two 1-D helical coordination polymeric Cu(II) complexes

Two helical coordination polymeric copper(II) complexes bearing amino acid Schiff bases HL or HL′, which are condensed from 2-hydroxy-1-naphthaldehyde with 2-aminobenzoic acid or l-valine, respectively, have been prepared and characterised by X-ray crystallography. In [CuL]_n (1) the copper(II) atoms are bridged by syn-anti carboxylate groups giving infinite 1-D right-handed helical chains which are further connected by weak C-H?Cu interactions to build a 2-D network. While in [CuL′]_n (2) the carboxylate group acts as a rare monatomic bridge to connect the adjacent copper(II) atoms leading to the formation of a left-handed helical chain. Magnetic susceptibility measurements indicate that 1 exhibits weak ferromagnetic interactions whereas an antiferromagnetic coupling is established for 2. The magnetic behavior can be satisfactorily explained on the basis of the structural data.     

Structural diversification of the coordination mode of divalent metals with 1,3-propanediaminetetraacetate (1,3-pdta): The missing crystal structure of the s-block metal complex [Sr2(1,3-pdta)(H2O)6]·H2O

This paper reports the synthesis and X-ray characteristics of the missing homonuclear s-block metal complex {[Sr₂(1,3-pdta)(H₂O)₆]·H₂O}_n. In the title compound, the hexadentate 1,3-propanediaminetetraacetate (1,3-pdta) ligand joins to two Sr(II) centers via the diamine chain. Moreover, each Sr(II) is bridged through two carboxylate O atoms and a water molecule to two neighboring Sr(II) ions. The coordination sphere around each Sr(II) ion consists of one diamine nitrogen, four carboxylate oxygens and four water molecules. Comparison with the previously reported M(II)-1,3-pdta complexes reveals that increasing of the ion size results in the incorporation of water molecules into its first coordination sphere and consequent increase of the coordination number (C.N.) from six to seven or eight, while keeping the hexadentate coordination mode of the ligand. Further increase of the metal ion size leads to the loss of the chelating properties of the diamine and formation of a bis-tridentate complex. Associated with it is the change in the binding mode of the carboxylate groups. This forms the basis for classification of divalent metal 1,3-pdta complexes into five distinct structural classes. Additionally, in the present study X-ray powder diffraction and IR spectroscopy were used to distinguish the different structural types of M(II)-1,3-pdta complexes, including Ba[Ba(1,3-pdta)]·2H₂O which has been used for their preparation.     

Oxidation of wood cellulose using 2-azaadamantane N-oxyl (AZADO) or 1-methyl-AZADO catalyst in NaBr/NaClO system

A wood cellulose was oxidized with catalytic amounts of 2-azaadamantane N-oxyl (AZADO) or 1-methyl-AZADO, in an NaBr/NaClO system, in water at pH 10. The oxidation efficiency, carboxylate/aldehyde contents, and degree of polymerization (DP_v) of the oxidized celluloses thus obtained were evaluated in terms of the amount of AZADO or 1-methyl-AZADO catalyst added, in comparison with those prepared using the TEMPO/NaBr/NaClO system. When the AZADO/NaBr/NaClO and 1-methyl-AZADO/NaBr/NaClO oxidation systems were applied to wood cellulose using the same molar amount of TEMPO, the oxidation time needed for the preparation of oxidized celluloses with carboxylate contents of 1.2–1.3 mmol/g was reduced from ≈80 to 10–15 min. Moreover, the molar amounts of AZADO and 1-methyl-AZADO that had to be added for the preparation of oxidized celluloses with carboxylate contents of 1.2–1.3 mmol/g were reduced to 1/32 and 1/16 of the amount of TEMPO added, respectively. The DP_v values for the AZADO- and 1-methyl-AZADO-oxidized celluloses after NaBH₄ treatment were in the range of 600–800. This indicated that not only C6-carboxylate groups but also C2/C3 ketones were formed to some extent on the crystalline cellulose microfibril surfaces during the AZADO- and 1-methyl-AZADO-mediated oxidation. When the AZADO-oxidized wood cellulose, which had a carboxylate content of 1.2 mmol/g, was mechanically disintegrated in water, an almost transparent dispersion consisting of individually nano-dispersed oxidized cellulose nanofibrils was obtained, with a nanofibrillation yield of 89 %.     

Alternating copolymerization of carbon dioxide and cyclohexene oxide catalyzed by salen CoIII(acetate) complexes

A series of Co^III carboxylate based upon N,N,O,O-tetradentate Schiff base ligand framework have been prepared. X-ray diffraction analysis confirms that these Schiff base Co^III carboxylate are all monomeric species with a six-coordinated central Co in their solid structures. The activities and polycarbonate selectivity of these complexes toward the copolymerization of epoxide (cyclohexene oxide and propylene oxide) and carbon dioxide have been investigated in the presence of bis(triphenylphosphine)iminium chloride. Copolymerization experiments indicate that [bis(α-methyl-3,5-di-tertbutyl-salicylaldehyde) ethylenediiminato] Co^IIIOOCH₃ exhibits the highest activity and polycarbonate selectivity among these Co^III carboxylate. The resultant copolymer contained almost 100 % carbonate linkages with the molecular weight up to 71.8 kg mol^?1 as well as narrow polymer dispersity index (polymer dispersity index?=?1.5). The substituents and the mode of the bridging part between the two nitrogen atoms both exert significant influences upon the progress of the copolymerizations, influencing both the polycarbonate selectivity and the rate of copolymerization.     

Kinetics study of the UV-initiated cationic polymerization of cycloaliphatic diepoxide resins

Photo-differential scanning calorimetry (photo-DSC) was used to study the cure kinetics of UV-initiated cationic photo-polymerization of epoxy resin monomers in presence of different photoinitiators and to investigate the photo-reactivity with respect to their chemical structure. Two cycloaliphatic diepoxy monomers - 3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexane carboxylate and bis-(3,4-epoxycyclohexyl) adipate - were studied. Both monomers have two terminal epoxy functional groups and differ only in the number of, so-called, “space” carboxylate group and thus the overall length of the molecule. Different kinetics analysis results, including enthalpy of the reaction, induction time, peak maximum, percentage conversion were obtained for both epoxy systems for different amounts of added photoinitiator and at different isothermal temperatures (30-70 °C). Two kinetic parameters - rate coefficient (k) and the order of the initiating reaction (m) - were determined, using an autocatalytic kinetics model. Activation energy for the two epoxies curing process using the Arrhenius equation was calculated as well. Results show that photochemical reactivity is influenced by the chemical structures of monomers.     

Synthesis,Characterization, and DNA Binding Properties of Dinuclear Copper（Ⅱ） Complex [Cu2（TATP）2（L-Leu）2（CIO4）2]2·2H2O

A dinuclear copper（Ⅱ） complex[Cu2（TATP）2（L-Leu）2（CIO4）2]2·2H2Owas synthesized and characterized, where, TATP=1,4,8,9-tetraazatriphenylene, and L-Leu=L-leucinate. The complex was crystallized in the triclinic space group P1, with two independent molecules in a unit cell. Two Cu（Ⅱ） ions in each complex [Cu2（TATP）2（L-Leu）2（CIO4）2] molecule were found to be in different coordination geometries, i.e., Cu2 or Cu4 of a distorted square-pyramidal geometry coordinated with two nitrogens of TATP, the amino nitrogen and one carboxylate oxygen of L-Leu and one oxygen of perchlorate, and Cul or Cu3 with an octahedral geometry coordinated with the above stated similar coordinated atoms, and another carboxylate oxygen of L-Leu coordinating to Cu2 or Cu4. The complex can interact with CT-DNA by an intercalative mode and cleave pBR322 DNA in the presence of ascorbate.     

Enhanced Electron Transfer Dissociation of Peptides Modified at C-terminus with Fixed Charges

The impact of the conversion of carboxylates in peptides to basic or fixed charge sites on the outcome of electron transfer dissociation (ETD) is evaluated with respect to ETD efficiency and the number of diagnostic sequence ions. Four reagents, including benzylamine (BA), 1-benzylpiperazine (BZP), carboxymethyl trimethylammonium chloride hydrazide (GT), and (2-aminoethyl)trimethylammonium chloride hydrochloride (AETMA), were used for the carboxylate derivatization, with the first two replacing the acidic carboxylate groups with basic functionalities and the latter two introducing fixed charge sites. The ETD efficiencies and Xcorr scores were compared for both nonderivatized and derivatized tryptic and Glu-C peptides from cytochrome c. Derivatization of the carboxylate increases the average charge states, the number of fragment ions, and the dissociation efficiencies of peptides, especially for the fixed charge reagent, AETMA.