Surface carboxylation of porous regenerated cellulose beads by 4-acetamide-TEMPO/NaClO/NaClO2 system

A commercial regenerated bead cellulose was suspended in water at pH 4.8, and oxidized with NaClO₂ used as a primary oxidant and catalytic amounts of NaClO and 4-acetamide-2,2,6,6-tetramethylpiperidinyl-1-oxyl radical. Carboxylate groups were formed up to 1.87 mmol/g in the beads by the oxidation of C6 primary hydroxyls to carboxylates without significant weight losses or morphological changes. The spherical shapes, highly porous surface structures consisting of nano-sized fibrils, and the cellulose II crystal structure of the original beads were mostly maintained by the oxidation, indicating that the carboxylate groups formed are predominantly present on the fibril surfaces. Cation-exchange behavior of the TEMPO-oxidized cellulose beads was compared with carboxymethylated cellulose beads, showing that the former was characteristic and superior to the latter in terms of adsorption of metal ions and cationic polymers. Especially, the TEMPO-oxidized cellulose beads had high adsorption behavior of lead ion and high-molecular-weight cationic polymers.     

Biodegradable Cellulose Block Copolymers

Biodegradable polymers can be prepared by the incorporation of cellulose oligomeric blocks into the polymer backbone. Block copolymers prepared by reacting equimolar amounts of depolymerized cellulose triacetate (CTA) with MDI or TDI and block terpolymers prepared by reacting the CTA oligomer with poly (propylene glycol) capped with MDI or TDI were deacetylated and incubated with cellulysin at pH 5 and 50 °C. The intrinsic viscosity of each copolymer decreased substantially even after 10 hr incubation time. There was negligible acid hydrolysis. Cellulose showed a smaller decrease at the same incubation time-probably due to its lower accessibility. Methods for incorporating cellulose oligomeric blocks and other biodegradable blocks into different types of polymers are discussed.     

Preparation and properties of cellulose/PE-co-AA blends

Cellulose/polyethylene-co-acrylic acid blends (cellulose concentration 0–50 wt.%) was prepared via mixing their alkaline solutions. The formed suspension was precipitated and dried, where after the morphology as well the thermal and mechanical properties of the blends were characterized by Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), and Dynamic Mechanical Analyses (DMA). In addition, the melt properties of the blend were studied by rotational rheometer following some injection molding trials as well. The polymers were found to be dispersed homogenously in the blend and the crystallization temperature of the PE-co-AA phase was increased ～6 °C due to the nucleation ability of the cellulose phase. The size of the discontinuous cellulose phase was 5 μm at the most while at higher cellulose concentrations (30–50 wt.%) the polymers formed co-continuous morphology in the blend. This change in the morphology was observed also in their melt properties which showed that the blend reached so called percolation point at ～20 wt.% of cellulose. Finally, the blends were found to be injection moldable over the whole composition range, if only the injection molding became more challenging (i.e. higher mold temperatures and longer mold cooling times were required) after the percholation point.     

Synthesis of novel and regioselectively mesogen-incorporated thermotropic liquid crystals from cellulose derivatives

Regioselectively mesogen-incorporated cellulose derivatives, in which the hydroxy group at C-6 is displaced by a bulky and rigid mesogenic group such as {4-[(4-methoxyphenoxy)carbonyl]phenoxy}acetate or [(4′-cyanobiphenyl-4-yl)oxy]acetate, and the C-2 and C-3 groups are displaced by octanoyl or lauroyl groups, were synthesized. Thermogravimetric and differential scanning calorimetric analyses of the final products, along with polarized optical microscopic observations, revealed that the obtained cellulose derivatives have a thermotropic liquid-crystalline nature and transition from the mesomorphic to the isotropic phase over a wide range of temperatures. These derivatives could be considered to be main-chain liquid-crystalline cellulosic polymers.     

Morphology control of poly(lactic) acid/polypropylene blend composite by using silanized cellulose fibers extracted from coir fibers

The objective of this work is the use of cellulose fibers extracted from coir fibers as Janus nanocylinders to suppress the phase retraction and coalescence in poly(lactic) acid/polypropylene bio-blend polymers via prompting the selective localization of cellulose fibers at the interface using chemical modification. The untreated and modified cellulose fibers extracted from coir fibers using a silane molecule (tetraethoxysilane) were used as reinforcement and as Janus nanocylinder at two weight contents (2.5 wt% and 5 wt%) to manipulate the morphology of the bio-blends. Their bio-composites with PLA-PP matrix were prepared via melt compounding (at PLA/PP: 50/50). The treatment effect on component interaction and the bio-composites properties have been studied via Scanning electron microscopy, infrared spectroscopy, and differential calorimetry analysis. The mechanical and rheological properties of nanocomposites were similarly assessed. Young's modulus and tensile strength of PLA-PP nanocomposites reinforced by silanized cellulose fibers show a great enhancement as compared to a neat matrix. In particular, there was a gain of 18.5% in Young's modulus and 11.21% in tensile strength for silanized cellulose fiber-based bio-blend composites at 5 wt%. From the rheological point of view, it was found that the silanized cellulose fibers in PLA-PP at both fibers loading enhances the adhesion between both polymers leading to tuning their morphology from sea-island to the continuous structures with the appearance of PLA microfibrillar inside of bio-composites. This change was reflected in the relaxation of the chain mobility of the bio-blend composites.

     

Cellulose Graft Copolymers

Graft copolymerization reactions of fibrous cellulose with vinyl monomers were initiated at free radical sites formed on the cellulose molecule by interaction with high-energy radiation, by reaction with Ce⁴⁺ ions in acidic solution, or by H abstraction by ·OH radicals fromed by reaction of Fe²⁺ ions with HLOz in aqueous solution. The effects of experimental conditions on the nature, half-lives, location of these free radical sites on the cellulose molecule, and on the copolymerization reactions were studied by the use of electron spin resonance spectroscopy. The molecular weights of the grafted polymers varied over a range from about 3 × 10⁴ to 1 × 10⁶. The distributions of the grafted polymers within the fibrous cellulosic structure were determined. Some of the changes in physical properties of the cellulose graft copolymers, as compared with cellulose, were decreased permanent set, development of thermoplasticity, decreased stiffness, increased rot resistance, and increased abrasion resistance.     

SYNTHESIS AND PROPERTIES OF POLY-1,3,5-TRIAZINES

Two new polytriazines: poly[2-methyl-4, 6-(4,′4″-diphenylene)-1, 3, 5-triazine] (Ⅰ) and poly[2-phenyl-4, 6-(4′, 4″-diphenylene)-1, 3, 5-triazine] (Ⅱ) were synthesized from the solution condensation of biphenyl-4, 4′-diamidine dihydrochloride with acetic anhydride and biphenyl-4, 4′-diamidine with benzaldehyde respectively. These two polymers were characterized by TGA, DTA, elemental analysis and IR spectroscopy. They exhibited good thermal oxidative stability as shown by the fact that the powders of these polymers suffered 5.4%, 2.4% weight loss after isothermal aging in air at 300℃for 200 hours. The decomposition temperature of (Ⅱ) was 583℃in air and 590℃in N_2. These linear poly-1, 3, 5-triazines were soluble in concentrated sulfuric acid, phosphoric acid and trifluoroacetic acid whereas the erosslinked poly-1, 3, 5-triazines reported in the literature were insoluble and infusible.It is interesting that these polymers can form complexes with metal halides as determined by X-ray photoelectron spectroscopy (XPS). The polymer metal complex (Ⅲ). PdCl_2 possesses catalytic activity for hydrogenation.     

Cellulose wet wiper sheets prepared with cationic polymer and carboxymethyl cellulose using a papermaking technique

Carboxymethyl cellulose (CMC)-rich cellulose sheets were prepared with a cationic retention aid, poly[N,N,N-trimethyl-N-(2-methacryloxyethyl)ammonium chloride] (PTMMAC), using a papermaking technique. When 5% PTMMAC and 5% CMC were added to cellulose slurries, approximately 94% of the polymers were retained in the sheets by formation of polyion complexes between the two polymers. When the PTMMAC/CMC/cellulose sheets were soaked in solutions consisting of ethanol, water and calcium chloride (EtOH/H₂O/CaCl₂) with a weight ratio of 75:24:1, almost all PTMMAC and CMC molecules remained in the sheets, forming the structures of PTMMAC-N⁺Cl⁻ and CMC-COO⁻Ca²⁺Cl⁻ without dissolution of these molecules in the soaking solution. Thus, PTMMAC, CMC and calcium contents in the sheets were able to be determined on the basis of these PTMMAC and CMC structures from analytical data such as nitrogen, calcium and chlorine contents. The trade-off properties between sufficient wet strength in use and water-disintegrability after use can be added to the PTMMAC/CMC/cellulose sheets by selecting weight ratios of the EtOH/H₂O/CaCl₂ solution used as the impregnation liquid.     

Studies of the separation and characterisation of mixtures of starch and cellulose derivatives by use of chromatography and mass spectrometry

In this work a method was developed for characterisation of commercially available polymers consisting of mixtures of substituted cellulose and starch. Selective hydrolysis with specific enzymes was used to achieve separation of the two polymers in the mixture. Enzymes hydrolysing (1→4)-α-D and (1→6)-α-D-glycosidic bonds were used for the starch part and enzymes hydrolysing (1→4)-β-D-glycosidic bonds for the cellulose part. The hydrolysed fraction was separated from the unhydrolysed fraction and characterised by use of size-exclusion chromatography (SEC), to confirm that enzyme hydrolysis of the different polymers had occurred. High-performance anion-exchange chromatography (HPAEC) was performed to determine the amount of unmodified glucose units (UGU) in the fractions. Electrospray ionisation mass spectrometry (ESIMS) was used for determination of the substituents. All products were converted to monomers by acid hydrolysis to simplify mass spectral identification of the substituents. The monomers were further subjected to acetylation with acetic acid anhydride to facilitate identification of the substituents. By combining the results from the different analytical techniques a picture of the samples was obtained.     

超分子螯合树脂--杯[4]芳烃接枝纤维素的设计、合成与吸附性能

通过纤维素多乙烯多胺衍生物2a~2c与1,3-二环氧丙基杯[4]芳烃3反应,合成了螯合树脂杯芳烃接枝纤维素4a~4c,用红外、元素分析和SEM等对其结构和形貌进行了表征.通过含氮量推算出新螯合树脂4a~4c中每个纤维素单元的杯芳烃接枝取代度分别为0.75、0.82和0.87.金属阳离子吸附性能实验表明,杯芳烃单元的引入在吸附过程中有重要作用,该螯合树脂结合了杯芳烃和纤维素的各自吸附性能优势,不仅吸附容量较高,而且表现出高的选择性吸附能力.树脂4b和4c对Ni2+离子表现出很高的吸附选择性,4a~4c的Ni2+饱和吸附容量分别达到2.96 mmol/g、2.93 mmol/g和2.66 mmol/g.在pH<4的强酸性条件下树脂的吸附能力迅速下降.该树脂用10%的氨水解吸附后有较好的重复使用性.     

Controlled grafting of cellulose esters using SET‐LRP process

Here, we present the first example of application of single‐electron transfer living radical polymerization (SET‐LRP) process to a controlled grafting of cellulose esters, cellulose diacetate (CDA), and cellulose acetate butyrate (CAB). The cellulose ester macroinitiators with various functionality densities have been prepared by acylation of the backbones with 2‐bromoisobutyryl (BrIB) and dichloroacetyl (DCA) groups, respectively. Methacrylate monomers were polymerized using DCA‐functionalized macroinitiators in the presence of pentamethyldiethylene triamine as a ligand. At 30 °C, the reaction is rather slow, reaching about 10% conversion after 3 to 6 h of polymerization, whereas the higher temperature (60 °C) perceptibly speeds up the polymerization so that methyl methacrylate (MMA) conversion is ～30% after 5 h. Graft copolymers with random‐type and diblock‐type grafts having amphiphilic character were also synthesized. For acrylate grafting (BuA and t‐BuA), BrIB‐functionalized macroinitiators are more convenient in a combination with a low concentration of Cu(0) and Me₆TREN as a ligand and polymerization is detectably faster even at the lower temperature than that of MMA. Kinetic studies show “living” character of both the graftings. Important advantages of SET‐LRP, compared with classic ATRP, are (i) higher polymerization rate, (ii) lower extent of recombination of the growing grafts and (iii) negligible coloration of the products with catalytic residua, so that the prepared polymers do not require additional careful purification. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis, crystal structure, and characterization of new tetranuclear Ag(I) complexes with triazole bridges

The self-assembly of Ag(I) ions with 3,5-dimethyl-4-amino-1,2,4-triazole (L1) and 4-salicylideneamino-1,2,4-triazole (L2) gave two novel complexes, [Ag4(mu2-L1)6][Ag4(mu2-L1)6(CH3CN)2](ClO4)8.2H2O (1) and [Ag4(mu2-L2)6(CH3CN)2](AsF6)4.2H2O (2), both of which contain tetranuclearic clusters constructed via Ag(I) ions and six N1,N2-bridged triazoles with a Ag4N12 core. When 4-(6-amino-2-pyridyl)-1,2,4-triazole (L3) was employed, {[Ag4(mu2-L3)4(mu3-L3)2](CF3SO3)4.H2O}n (3), {[Ag4(mu2-L3)4(mu3-L3)2](ClO4)4}n (4), and {[Ag4(mu2-L3)2(mu3-L3)4](PF6)4.CH3CN.0.75H2O}n (5) were isolated. 3 and 4 are 1D polymers, while 5 is a 2D polymer. 1D and 2D coordination polymers are constructed via the self-assembly of Ag4N12 cores as secondary building units (SBUs). The connection of these SBUs can be represented as a ladderlike structure for 1D polymers and a 4.8(2) net for 2D polymers. Electrospray ionization mass spectrometry measurements and NMR (1H and 13C) studies demonstrate that the tetranuclear SBU retains its integrity and the coordination polymers decompose into the tetranuclear Ag4N12 core in solution. 2 exhibits blue emission in the solid state and green emission in solution at ambient temperature. Strong blue fluorescence for complexes 3-5 in the solid state can be assigned to the intraligand fluorescent emission.     

Polymer fractionation using chromatographic column packed with novel regenerated cellulose beads modified with silane

Novel microporous beads with the particle size of about 90 microm were prepared, for the first time, from cellulose and konjac glucomannan (RC/KGM3) in 1.5 M NaOH/0.65 M thiourea aqueous solution by emulsification method. The microporous beads were then modified with silane to avoid the adsorption of polymers containing hydroxyl groups, coded as RC/KGM3-Si. A preparative size-exclusion chromatographic (SEC) column (500 mm x 20 mm) was packed with RC/KGM3-Si, and its exclusion limit and fractionation range of the stationary phase were, respectively, weight-average molecular masses (Mw) of 4.8 x 10(5) g/mol and 5.3 x 10(3)-4.8 x 10(5) g/mol for polystyrene in tetrahydrofuran. The preparative SEC column was used to fractionate poly(epsilon-caprolactone) (PCL, Mw = 8.31 x 10(4) g/mol polydispersity index d= 1.55) in tetrahydrofuran and a polysaccharide PC3-2 (Mw = 1.21 x 10(5) g/mol, d= 1.70) in 0.05 M NaOH aqueous solution, respectively. The Mw values of the fractions determined by analytical SEC combined with laser light scattering were from 1.2 x 10(4) to 1.84 x 10(5) for PCL and from 8.5 x 10(4) to 2.13 x 10(5) for PC3-2, as well as d from 1.2 to 1.5. The results indicated that the preparative SEC has good fractionation efficiency in both organic solvent and alkaline aqueous solution for the various polymers.     

Cellulose as matrix component of conducting films

Conjugated polymers gain growing importance as conductive materials in industrial applications in various fields of electronic devices. Cellulose with its extraordinary supramolecular structure and material properties can help to awake the possibilities for conducting polymers in interplay of the two materials. The ability of additional derivatization, the stiff and oriented molecular structure and the inherent strength, stability and film-forming properties give cellulose a complementary role to the brittle conjugated polymers, cellulose imparting the features of a stable and robust carrier component. To go forward this way, making a composite out of cellulose and conducting polymers is a prerequisite. Different strategies to form composite materials of non-derivatized cellulose and conductive organic polymers were tested. Significant differences between various mixing strategies as well as between the conducting polymers polyaniline (PAni), polypyrrole (PPy), and polythiophen (PTh) were observed. In situ synthesis of the conducting polymers in cellulose solutions and microcellulose dispersions as well as blending of pre-synthesized conducting polymers in these cellulose systems were tested. Unexpectedly, not homogenous mixtures showed best results in respect to film formation and conductivity, but composites formed by heterogeneous mixtures of the conducting polymers within a cellulose gel. Best results were obtained with finely dispersed PAni. The results support development studies towards circuitry and photo-current systems based on cellulose carriers.     

Interaction forces between cellulose microspheres and ultrathin cellulose films monitored by colloidal probe microscopy-effect of wet strength agents

Colloidal probe microscopy was employed to study forces between cellulose surfaces upon addition of a series of cationic copolymers in aqueous solution, as model compounds for wet strength agents. The content of quaternary ammonium groups and primary amines was systematically varied in the cationic polymers, to distinguish between the importance of electrostatical and H-bonding effects. Cellulose microspheres were glued at the apex of tipless microfabricated cantilevers and used as colloidal probes. Ultra thin cellulose films and cellulose fibres were employed as model surfaces. The cellulose films of a thickness of about 5 nm were spin-coated from cellulose solution onto silicon substrates. The root-mean-square-roughness (RMS) was 0.3-0.8 nm. The cationic model polymers were compared to Servamine, a polymer employed as standard wet strength resin in papermaking industries. Force versus separation measurements showed a detailed picture of adhesion and contact breaking. Relatively strong adhesion of the order of 0.3 mJ/m(2) was observed with Servamine within a range of approximately 10 nm. At larger distances weak bond breaking and elastic chain pulling were identified. When approaching the surface one to two small jump-in's possibly related to strong binding of Servamine and subsequent attraction could be found in the case of Servamine. In contrast, all the model copolymers showed only a weak adhesion of 8-30 micro/m(2), i.e., an order of magnitude less than that of Servamine and subsequent elastic rupture domains. The contour length, persistence length and characteristic rupture distances were calculated by means of applying the WLC model. Measurements against cellulose fibres obtained from the production process proved the relevance of the model systems.     

Novel Pb(II), Zn(II), and Cd(II) coordination polymers constructed from ferrocenyl-substituted carboxylate and bipyridine-based ligands

Treatment of two kinds of ferrocenyl-substituted carboxylate ligands (3-ferrocenyl-2-crotonic acid, HOOC-CH=(CH(3))CFc (Fc=(eta(5)-C(5)H(5))Fe(eta(5)-C(5)H(4))) or O-ferrocecarbonyl benzoic acid, o-HOOCC(6)H(4)COFc with Pb(OAc)(2).3H(2)O, Zn(OAc)(2).2H(2)O, or Cd(OAc)(2).2H(2)O) resulted in four novel ferrocene-containing coordination polymers [[Pb(mu(2)-eta(2)-OOCCH=(CH(3))CFc)(2)].MeOH](n) (1), [[Zn(o-OOCC(6)H(4)COFc)(2)(4,4'-bipy)(H(2)O)(2)].2MeOH.2H(2)O](n) (4,4'-bipy = 4,4'-bipyridine) (2), [[Cd(o-OOCC(6)H(4)COFc)(2)(bpe)(MeOH)(2)].2H(2)O](n) (bpe = 1,2-bis(4-pyridyl)ethene) (3), and [Pb(o-OOCC(6)H(4)COFc)(eta(2)-o-OOCC(6)H(4)COFc)(bpe)](n)() (4). Their crystal structures have been characterized by single X-ray determinations. In polymer 1, Pb(II) ions are bridged by tridentate FcC(CH(3))=CHCOO(-) anions, forming an infinite chain [Pb(mu(2)-eta(2)-OOC=CH(CH(3))CFc)(2)](n). In polymers 2-4, there are three kinds of components, metal ions, o-FcCOC(6)H(4)COO(-) units, and organic bridging ligands. The bipyridine-based ligands connect metal ions leading to a one-dimensional chain with o-FcCOC(6)H(4)COO(-) units acting as monodentate or chelate ligands in the side chain. Such coordination polymers containing ferrocenyl-substituted carboxylate and bipyridine-based ligands are very rare. The solution-state differential pulse voltammetries of polymers 1-4 were determined. The results indicate that the half-wave potential of the ferrocenyl moieties is influenced by the Pb(II) ions in polymer 1 and strongly influenced by Zn(II), Cd(II), or Pb(II) ions in polymers 2-4. The thermal properties of the four polymers were also investigated.     

Copper(I) coordination polymers [{Cu(mu-X)}2{RP(mu-NtBu)}2]n (R = OC6H4OMe-o; X = Cl, Br, and I) and their reversible conversion into mononuclear complexes [CuX{(RP(mu-NtBu)2}2]: synthesis and structural characterization

The reactions of cyclodiphosphazane cis-[tBuNP(OC6H4OMe-o)]2 (1) with 2 equiv of CuX in acetonitrile afforded one-dimensional Cu(I) coordination polymers [Cu2X2{tBuNP(OC6H4OMe-o)}2]n (2, X = Cl; 3, X = Br; 4, X = I). The crystal structures of 2 and 4 reveal a zigzag arrangement of [P(mu-N)(2)P] and [Cu(mu-X)(2)Cu] units in an alternating manner to form one-dimensional Cu(I) coordination polymers. The reaction between 1 and CuX in a 2:1 ratio afforded mononuclear tricoordinated copper(I) complexes of the type [CuX{(tBuNP(OC6H4OMe-o))2}2] (5, X = Cl; 6, X = Br; 7, X = I). The single-crystal structures were established for the mononuclear copper(I) complexes 5 and 6. When the reactant ratios are 1:1, the formation of a mixture of polymeric and mononuclear products was observed. The Cu(I) polymers (2-4) were converted into the mononuclear complexes (5-7) by reacting with 3 equiv of 1 in dimethyl sulfoxide. Similarly, the mononuclear complexes (5-7) were converted into the corresponding polymeric complexes (2-4) by reacting with 3 equiv of copper(I) halide under mild reaction conditions.     

Functional macrocyclic polysulfones via aminomethylpolysulfone

Amidoalkylation of polysulfone (PS) with N-chloromethylphthalimide (CMPi) to polymer 2/2a (PiPs), followed by hydrazinolysis of PiPs in CHCl₃ with neat N₂H₄ + H₂O (RT 3 days) to aminomethylpolysulfone ( 3 , AMPS). Condensation of AMPS with 4-chlorosulfonylbenzo-18-crown-6 produced B18C6AMPS. Okawara-type condensations with diglycydyl glycols ( 5 ) led to azacrown polysulfone polymers 6d , and polystyrene azacrown polymers 6a–6c . Products were characterized by 270 MHz ¹H-NMR, thermogravimetric (TGA) and DSC analysis. Insoluble aminomethylpolystyrene beads were used as model supports to study the Okawara-type reaction with diglycydyl ethers and the products showed thermoregulated complexation of alkali salts on polymers 6b and 6c. Polysulfone membranes were prepared from B18C6AMPS and transport of K⁺ in a liquid membrane-type experiment was demonstrated.     

Synthesis and thermal properties of poly(methyl methacrylate)-graft-(cellobiosylamine-C15)

Model experiments for synthesis of a comb-shaped copolymer with cellulose side-chains were performed with cellobiose derivatives. A novel cellobiose monomer, N-(15-methacryloyloxypentadecanoyl)-2,3,6-tri-O-acetyl-4-O-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)-β-d-glucopyranosylamine (2) was prepared from heptaacetylcellobiosyl- amine. Homopolymerization of cellobiose monomer 2 and copolymerization of monomer 2 with methyl methacrylate (MMA) were performed using 2,2′-azobis(isobutyronitrile) (AIBN) as an initiator to obtain homopolymers 3-i (i = 1–4) and copolymers 3-i (i = 5–7), poly(methyl methacrylate)-graft-(heptaacetylcellobiosylamine-C15). The size exclusion chromatography—multi-angle laser light scattering (SEC-MALS) measurements revealed that comb-shaped homopolymers 3-i (i = 1–4) had more compact structures compared to copolymers 3-i (i = 5–7) at the same elution volume. Selective deacetylation of polymers 3-i (i = 1–7) gave novel cellobiose polymers 4-i (i = 1–7), poly(methyl methacrylate)-graft-(cellobiosylamine-C15). The amide linkages between cellobiose moiety and long-chain alkyl group, and the ester linkages between PMMA main-chain and long-chain alkyl group remained after deprotection. The differential scanning calorimetry (DSC) measurements revealed that the T _gs of the polymers 4-i (i = 1, 5, 6, 7) increased with increasing cellobiose composition in the polymers. It was indicated that cellobiose moieties of polymers 4-i (i = 1, 5, 6, 7) reduced the mobility of PMMA main-chain.     

The relationship between intramolecular hydrogen bonds and certain physical properties of regioselectively substituted cellulose derivatives

This article tries to provide some direct evidence about the relationship between the intramolecular hydrogen bonds in cellulose and their corresponding effect on physical properties. The formation of intramolecular hydrogen bonds has been proved to contribute directly to certain physical properties of cellulose, such as its solubility in solvents having different polarities, the relative reactivities of the hydroxyls in a repeating unit and its crystallinity, using a 6-O-methylcellulose (6MC) film that was known¹ to have intramolecular hydrogen bonds. The excellent solubility of 6MC when compared with other cellulose derivatives indicated a lack of interchain hydrogen bonds. A comparison of the relative reactivities between the C-2 and C-3 position hydroxyls in 6MC also indicates that intramolecular hydrogen bonds once formed in 6MC films are possibly maintained even after dissolution in solvents. In addition, the poor crystallinity exhibited by 6MC supports the idea that crystallization in cellulosics may be dependent more upon preferencial interchain hydrogen bonding at the C-6 position hydroxyls than upon a uniform structure such as that found in 6MC, where every structural unit is completely and regioselectively substituted, distinguishing it from other synthetic polymers such as polyolefins and polyesters. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 717–723, 1997