Hydroxyl‐ and amine‐terminated hyperbranched polyurethanes using AB2‐type azide monomers: Synthesis,characterization, fluorescence,and charge‐transfer complexation studies

Novel AB₂‐type azide monomers such as 3,5‐bis(4‐methylolphenoxy)carbonyl azide (monomer 1) , 3,5‐bis(methylol)phenyl carbonyl azide (monomer 2) , 4‐(methylol phenoxy) isopthaloyl azide (monomer 3) , and 5‐(methylol) isopthaloyl azide (monomer 4) were synthesized. Melt and solution polymerization of these monomers yielded hydroxyl‐ and amine‐terminated hyperbranched polyurethanes with and without flexible ether groups. The structures of theses polymers were established using FT‐IR and NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 3.2 × 10³ to 5.5 × 10⁴ g/mol depending on the experimental conditions used. The thermal properties of the polymers were evaluated using TGA and DSC: the polymer obtained from monomer ( 1 ) exhibited lowest T_g and highest thermal stability and the polymer obtained from monomer ( 2 ) registered the highest T_g and lowest thermal stability. All the polymers displayed fluorescence maxima in the 425–525 nm range with relatively narrow peak widths indicating that they had pure and intense fluorescence. Also, the polymers formed charge transfer (CT) complexes with electron acceptor molecules such as 7,7,8,8‐tetracyano‐quino‐dimethane (TCNQ) and 1,1,2,2‐tetracyanoethane (TCNE) as evidenced by UV‐visible spectra. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3337–3351, 2009     

Electron-transfer polymers. XXXVIII. Further investigation of “polymer effects” with self-protected polymer

3-Methacrylyloxymethyl-5,7,8-trimethylchroman-6-01 (MMC) was prepared, polymerized, and copolymerized. Poly-MMC, a reduced redox polymer, is stable to air and is oxidized readily. The redox behaviors of poly-MMC and copolymers with vinyl acetate were compared with that of 3-propionyloxymethyl-5,7,8-trimethylchroman-6-o1 (PMC), the model monomer. The titration curves of the polymers were flat as is usual with redox polymers, and showed higher midpoint potentials than the model monomer. One factor in this “polymer effect” was found to be adsorption of oxidized polymer on the electrode. But there seem still to be present other factors yet to be clarified.     

Introducing rigid pyrimidine ring to improve the mechanical properties and thermal‐oxidative stabilities of phthalonitrile resin

In this study, a novel phthalonitrile monomer containing pyrimidine ring, 4,6‐bis[3‐(3,4‐dicya‐ nophenoxy)phenoxy]pyrimidine (BCPM), was successfully synthesized by nucleophilic substitution reaction with resorcinol, 4,6‐dichloropyrimidine and 4‐nitrophthalonitrile. The BCPM monomer was cured by different temperature programs with 4‐(aminophenoxy)phthalonitrile (APPH) as catalyst to give the polymers. The molecular structures of the BCPM monomer and the polymers were investigated by Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR) spectroscopy. Differential scanning calorimetric (DSC) analysis was performed to study the processability of the BCPM monomer, which showed a wide processing window of about 117°C. The mechanical properties and thermal‐oxidative stability of the polymer were characterized by dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA), respectively, which indicated that the polymers exhibited excellent storage modulus, high glass transition temperature over 400°C, and outstanding thermal stability. The polymers also have low water absorption capacity and are suitable for humid environments.     

Homopolymerisation radicalaire de l'anhydride maleique

The radical homopolymerization of maleic anhydride was reinvestigated in benzene solution and the resulting polymers were characterized. The values of the reaction orders vs monomer and initiator, as well as the activation volume, give strong support for a radical polymerization with degradative transfer to monomer. The reaction scheme does not agree with the mechanism previously proposed. The kinetic results fit the Deb equation very well and confirm the abnormal character of the polymerization.     

PEGDA‐based luminescent polymers prepared by frontal polymerization

Frontal polymerization (FP) of poly(ethylene glycol) diacrylate (PEGDA) was carried out using benzoyl peroxide (BPO) as radical initiator. In addition, a pyrene containing monomer, 1‐pyrenebutyl acrylate (PyBuAc), was incorporated as a fluorescent probe in order to obtain luminescent materials with different chromophore contents. The resulting polymers were characterized by FT‐IR spectroscopy in the solid state and their thermal properties were determined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Moreover, the optical properties of these materials were studied by absorption and fluorescence spectroscopy. The maximum amount of the incorporated pyrene‐containing monomer into the polymer matrix was limited to 1 wt % by the polymerization process. The obtained labeled polymers poly(PEGDA‐co‐PyBuAc) exhibited a broad absorption band at 345 nm. The fluorescence spectra of these polymers exhibited mainly “monomer emission” so that no excimer emission was observed. It is possible to tune the color of the emitted light by varying the pyrene content in the samples. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2890–2897     

Reversible addition‐fragmentation chain transfer polymerization of methacrylates containing hole‐ or electron‐transporting groups

The controlled/living radical polymerization of 2‐(N‐carbazolyl)ethyl methacrylate (CzEMA) and 4‐(5‐(4‐tert‐butylphenyl‐1,3,4‐oxadiazol‐2‐yl)phenyl) methacrylate (t‐Bu‐OxaMA) via reversible addition‐fragmentation chain transfer polymerization has been studied. Functional polymers with hole‐ or electron‐transfer ability were synthesized with cumyl dithiobenzoate as a chain transfer agent (CTA) and AIBN as an initiator in a benzene solution. Good control of the polymerization was confirmed by the linear increase in the molecular weight (MW) with the conversion. The dependence of MW and polydispersity index (PDI) of the resulting polymers on the molar ratio of monomer to CTA, monomer concentration, and molar ratio of CTA to initiator has also been investigated. The MW and PDI of the resulting polymers were well controlled as being revealed by GPC measurements. The resulting polymers were further characterized by NMR, UV‐vis spectroscopy, and cyclic voltammetry. The polymers functionalized with carbazole group or 1,3,4‐oxadiazole group exhibited good thermal stability, with an onset decomposition temperature of about 305 and 323 °C, respectively, as determined by thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 242–252, 2007     

Synthesis,characterization, and biological activity of [2‐oxo‐2‐(4‐acetyl) phenyl amino] ethylene methacrylate and its derivatives

A new type of methacrylate monomer, [2‐oxo‐2‐(4‐acetyl) phenyl amino] ethylene methacrylate (APEMA), was synthesized. The oxime, 2,4‐dinitrophenylhydrazone, and thiosemicarbazone derivatives of poly{[2‐oxo‐2‐(4‐acetyl) phenyl amino] ethylene methacrylate} [poly(APEMA)] were prepared with hydroxylamine hydrochloride, 2,4‐dinitrophenylhydrazine, and thiosemicarbazone hydrochloride, respectively. The radical homopolymerization of APEMA was performed at 65 °C in a 1,4‐dioxane solution with benzoyl peroxide as an initiator. The monomer and its homopolymer were characterized with Fourier transform infrared and NMR techniques. The thermal stabilities of poly(APEMA) and its derivatives were investigated with thermogravimetric analysis and differential scanning calorimetry. The ultraviolet stability of the polymers were compared. The solubility and inherent viscosity of the polymers were also determined. The number‐average and weight‐average molecular weights and polydispersity index of the polymers were determined with gel permeation chromatography. The antibacterial and antifungal effects of the monomer and the polymer and its derivatives were also investigated on various bacteria and fungi. The activation energies of the thermal degradation of the polymers were calculated with the Ozawa method. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3157–3169, 2004     

Liquid‐crystalline organic–inorganic hybrid polymers with functionalized silsesquioxanes

Liquid‐crystalline (LC) hybrid polymers with functionalized silsesquioxanes with various proportions of LC monomer were synthesized by the reaction of polyhedral oligomeric silsesquioxane (POSS) macromonomer with methacrylate monomer having an LC moiety under common free‐radical conditions. The obtained LC hybrid polymers were soluble in common solvents such as tetrahydrofuran, toluene, and chloroform, and their structures were characterized with Fourier transform infrared, ¹H NMR, and ²⁹Si NMR. The thermal stability of the hybrid polymers was increased with an increasing ratio of POSS moieties as the inorganic part. Because of the steric hindrance caused by the bulkiness of the POSS macromonomer, the number‐average molecular weight of the hybrid polymers gradually decreased as the molar percentage of POSS in the feed increased. Their liquid crystallinities were very dependent on the POSS segments of the hybrid polymers behaving as hard, compact components. The hybrid polymer with 90 mol % LC moiety (Cube‐LC90) showed liquid crystallinity, larger glass‐transition temperatures, and better stability with respect to the LC homopolymer. The results of differential scanning calorimetry and optical polarizing microscopy showed that Cube‐LC90 had a smectic‐mesophase‐like fine‐grained texture. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4035–4043, 2001     

Preparation of novel curcumin‐imprinted polymers based on magnetic multi‐walled carbon nanotubes for the rapid extraction of curcumin from ginger powder and kiwi fruit root

A novel molecularly imprinted polymer based on magnetic phenyl‐modified multi‐walled carbon nanotubes was synthesized using curcumin as the template molecule, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross‐linker. The phenyl groups contained in the magnetic imprinted polymers acted as the assisting functional monomer. The magnetic imprinted polymers were characterized by scanning electron microscopy, Fourier‐transform infrared spectroscopy and vibrating sample magnetometry. Adsorption studies demonstrated that the magnetic imprinted polymers possessed excellent selectivity toward curcumin with a maximum capacity of 16.80 mg/g. Combining magnetic extraction and high‐performance liquid chromatography technology, the magnetic imprinted polymer based on magnetic phenyl‐modified multi‐walled carbon nanotubes was applied for the rapid separation and enrichment of curcumin from ginger powder and kiwi fruit root successfully.     

Preparation of melamine molecularly imprinted polymer by computer‐aided design

Melamine was chosen as template, methacrylic acid was chosen as functional monomer, and divinylbenzene, ethylene glycol dimethacrylate, trimethylolpropane trimethylacrylate were chosen as cross‐linking agents, respectively. The WB97XD/6‐31G(d, p) method was used to calculate the geometry optimization of the different imprinting ratios, the action sites, the bonding situation, and the optimization of the cross‐linking agents. The nature of the imprinting effect was also studied by the atoms in molecules theory. The theoretical results showed that melamine interacts with methacrylic acid by hydrogen bonding, and the melamine molecularly imprinted polymers with a molar ratio of 1:6 have the most hydrogen bonds and the most stable structure. Divinylbenzene is the best cross‐linking agent for the melamine molecularly imprinted polymers. The melamine molecularly imprinted polymers were synthesized by precipitation polymerization. The results showed that the maximum adsorption capacity for molecularly imprinted polymers towards melamine is 19.84 mg/g, and the adsorption quantity of the polymers to melamine is obviously higher than that of cyromazine, cyanuric acid, and trithiocyanuric in milk. This study could provide theoretical and experimental references for the screening of the imprinting ratio and the cross‐linking agent for the given template and monomer system.     

Control of the stereochemical structure of silicon‐containing polymers

Various optically pure organosilicon compounds were synthesized or separated on HPLC. Stereoregular silicon‐containing polymers, poly(carbosilane)s, poly(carbosiloxane)s and poly(siloxane)s were synthesized from these compounds as monomer. Stereochemistry of the elementary reactions to give stereoregular polymers was elucidated.     

Synthesis and properties of a high‐performance pyrimidine‐containing self‐catalyzed phthalonitrile polymer

A self‐catalytic monomer of phthalonitrile, 2‐amino‐4,6‐bis[3‐(3,4‐dicyano‐phenoxy)phenoxy] pyrimidine (ACPP), was synthesized by a one‐pot method with resorcinol, 2‐amino‐4,6‐dichloropyrimidine, and 4‐nitrophthalonitrile. The chemical structure of the ACPP monomer was characterized by Fourier transform Infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy. The curing behavior of ACPP monomer was studied by differential scanning calorimetric, which indicated that the ACPP monomer had a low melting point (84 °C) and revealed an autocatalytic reaction and tremendously wide processing window (193 °C). Wide‐angle X‐ray diffraction (WAXD) and FTIR analyses were employed to explore the microstructure of the ACPP polymers. The properties of the three polymers with different curing procedures were investigated, which implied that the ACPP polymers exhibited excellent thermal stability, high modulus, superior glass‐transition temperature (T_g > 400 °C), and low water absorption with the increase in curing extent. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2287–2294     

An X‐shaped π‐conjugated polymer comprising of fluorene units and anthracene units with high efficiency. Synthesis and optical and electrochemical properties

A new X‐shaped π‐conjugated monomer comprising of fluorene units and anthracene units was synthesized, and it was used to fabricate the new X‐shaped π‐conjugated polymers and investigate the properties of the new polymers. Using different molar ratios between such monomer and a fluorene monomer gave three polymers that showed higher absolute PL quantum yields than the linear polyfluorene (PF) in the solid state. After thermal annealing at 200 °C for 4 h, the linear PF showed an additional bathochromic emission at about 550 nm, whereas such red‐shifted emission was fully eliminated for the X‐shaped polymers. The electroluminescent devices based on the X‐shaped polymers with a configuration of ITO/PEDOT:PSS/polymer/LiF/Ca/Al displayed blue emission with low turn‐on voltage and high brightness. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5616–5625, 2008     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Computer‐aided design and synthesis of CdTe@SiO2 core–shell molecularly imprinted polymers as a fluorescent sensor for the selective determination of sulfamethoxazole in milk and lake water

In this work, a molecular dynamics simulation method was introduced to compute the preassembled system of molecular imprinted polymers for sulfamethoxazole monomer. The results revealed that the ratio of sulfamethoxazole as template molecule to 3‐aminopropyltriethoxysilane as functional monomer to tetraethylorthosilicate as cross‐linker of 10:10:40 led to the most stable template‐functional monomer cluster. Based on the result of computational simulation, CdTe@SiO₂ core–shell imprinted polymers, a cadmium telluride quantum dots layer on the surface of aminofunctionalized SiO₂, were synthesized as the fluorescent sensor. Then, a series of measures were used to characterize the structure and morphology to get optimal sensors. The concentration range was 5.0–30.0 μmol/L between molecular imprinted polymers at CdTe at SiO₂, and sulfamethoxazole of the fluorescence intensity. To further verify the reliability and accuracy of the fluorescent sensor, the application was successfully by analyzing sulfamethoxazole in pure milk and lake water. The results showed the recoveries were above 96.89% with a relative standard deviation of 1.25–5.45%, and the fluorescence sensor with selective recognition provides an alternative solution for the determination of sulfamethoxazole.     

Nickel‐ and palladium‐catalyzed olefin polymerization under high pressures

The polymerization of 1‐hexene under high pressures (100–750 MPa) was investigated with nickel–α‐diimine complex/methylaluminoxane and palladium–α‐diimine complex/methylaluminoxane as catalyst systems. The catalytic activity of both the nickel and palladium complexes monotonously increased as pressure rose and became two to four times higher than that observed at atmospheric pressure. Palladium catalysts gave poly(1‐hexene)s with higher molecular weights under high pressure, whereas nickel‐catalyzed high‐pressure polymerizations gave polymers with higher molecular weights only at rather low monomer concentrations. The living‐like character in the palladium‐catalyzed polymerizations was somewhat enhanced under higher pressures, whereas the nickel‐catalyzed polymerizations under high pressures were not living. More branches were found in the polymers produced by nickel catalysts at higher pressures. The chain‐transfer reaction seemed to be accelerated by the high pressure in the nickel‐catalyzed reactions, although this was not apparent in the palladium‐catalyzed reactions. Dimers formed and were accompanied by high molecular weight polymers when nickel catalysts were used under high pressures and at high monomer concentrations. The possibility that very congested five‐coordinated species act as key intermediates for the dimerization is discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 293–302, 2003     

Preparation of polymer nanoparticles by self-assembling of amphiphilic poly-<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone derivatives in aqueous media

Amphiphilic N-vinylpyrrolidone polymers were prepared by a new one-step procedure consisting in radical polymerization of the monomer in the presence of long-chain monobasic saturated carboxylic acid chlorides as chain-transfer and chain-terminating agents. The behavior of the new amphiphilic polymers differing in the structure of the hydrophilic and hydrophobic moieties in aqueous media was studied. The synthesized polymers at definite concentrations undergo spontaneous aggregation with the formation of spherical nanosized micellar particles consisting of a hydrophobic core and a hydrophilic shell. The main characteristics of the polymer nanoparticles formed were determined, and the possibility of using them as promising carriers for the delivery of biologically active compounds and drugs was revealed.     

Synthesis,crystallization, and morphology of star‐shaped poly(ε‐caprolactone)

Six‐arm star‐shaped poly(ε‐caprolactone) (sPCL) was successfully synthesized via the ring‐opening polymerization of ε‐caprolactone with a commercial dipentaerythritol as the initiator and stannous octoate (SnOct₂) as the catalyst in bulk at 120 °C. The effects of the molar ratios of both the monomer to the initiator and the monomer to the catalyst on the molecular weight of the polymer were investigated in detail. The molecular weight of the polymer linearly increased with the molar ratio of the monomer to the initiator, and the molecular weight distribution was very low (weight‐average molecular weight/number‐average molecular weight = 1.05–1.24). However, the molar ratio of the monomer to the catalyst had no apparent influence on the molecular weight of the polymer. Differential scanning calorimetry analysis indicated that the maximal melting point, cold crystallization temperature, and degree of crystallinity of the sPCL polymers increased with increasing molecular weight, and crystallinities of different sizes and imperfect crystallization possibly did not exist in the sPCL polymers. Furthermore, polarized optical microscopy analysis indicated that the crystallization rate of the polymers was in the order of linear poly(ε‐caprolactone) (LPCL) > sPCL5 > sPCL1 (sPCL5 had a higher molecular weight than both sPCL1 and LPCL, which had similar molecular weights). Both LPCL and sPCL5 exhibited a good spherulitic morphology with apparent Maltese cross patterns, whereas sPCL1 showed a poor spherulitic morphology. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5449–5457, 2005     

Sequence‐Controlled Polymers with Furan‐Protected Maleimide as a Latent Monomer

Herein, a novel methodology for preparing sequence‐controlled polymers is illustrated by using a latent monomer, furan protected maleimide (FMI). At 110 °C, FMI is deprotected by retro Diels–Alder (rDA) reaction, and the released MI is immediately involved in the cross‐polymerization with styrene (St) to deliver heterosegments. At 40 °C the rDA reaction does not proceed, therefore homo‐poly(styrene) segments are produced. By implementing programmable temperature changes during polymerization of St and FMI, “living” polymers with tailored a sequence are created. A ternary copolymerization produces complex sequences as designed. Alkynyl‐functionalized FMI, used as a latent monomer, leads to the desirable placement of functional groups along the polymer chain. This latent‐monomer‐based strategy opens a new avenue for fabricating sequence‐controlled polymers.     

Enantiomer-selective Living Polymerization of <Emphasis Type="Italic">rac</Emphasis>-Phenyl Isocyanide Using Chiral Palladium Catalyst

We report the polymerization of phenyl isocyanides with the chiral palladium(II) initiating system. The resulting polymers with optically active properties were obtained by polymerization of the racemic isocyanide monomer (rac-1), and enantiomerically unbalanced polymerization of the monomer was found, providing substantial evidence for the enantiomer-selective polymerization of rac-1 mediated through chiral catalyst. A comparison between the enantiomerically pure monomers, 4-isocyanobenzoyl-L-alanine decyl ester (1s) and 4-isocyanobenzoyl-D-alanine decyl ester (1r), revealed a drastic discrepancy in the reactivity ratio of their homopolymerizations. It turned out that the monomer reactivity ratio of 1s was higher than that of 1r with chiral ligands. The results clearly demonstrated the inclination for incorporation of the 1s enantiomer during the polymerization process and thus resulted in the enantiomer-selective polymerization in this system. The effects of the catalyst chirality on the optically active properties of polymerization were investigated, and it was concluded that the formation of higher-ordered conformation with a handed helicity might be attributed to the chiral induction of chiral palladium(II) catalyst. Moreover, the polymers obtained through the enantiomer-selective polymerization of the enantiomerically pure monomer were with a significant improvement of the optical activity if the chirality of the monomer and the catalyst matched with each other.