Synthesis and characterization of phthalazinone containing poly(arylene ether)s via a novel N–C coupling reaction

High‐molecular‐weight poly(phthalazinone)s with very high glass‐transition temperatures (T_g's) were synthesized via a novel N–C coupling reaction. New bisphthalazinone monomers ( 7a–e ) were synthesized from 2‐(4‐chlorobenzoyl) phthalic acid in two steps. Poly(phthalazinone)s, having inherent viscosities in the range of 0.34–0.91 dL/g, were prepared by the reaction of the bis(phthalazinone) monomers with an activated aryl halide in a dipolar aprotic solvent in the presence of potassium carbonate. The poly(phthalazinone)s exhibited T_g's greater than 230 °C. polymer 8b synthesized from diphenyl biphenol and bis(4‐flurophenyl) sulfone demonstrated the highest T_g of 297 °C. Thermal stabilities of the poly(phthalazinone)s were determined by thermogravimetric analysis. All the poly(phthalazinone)s showed a similar pattern of decomposition with no weight loss below 450 °C in nitrogen. The temperatures of 5% weight loss were observed to be about 500 °C. The poly(phthalazinone)s containing 4,4′‐isopropylidenediphenol and 4,4′‐(hexafluoroisopropylidene) diphenol and diphenyl ether linkage were soluble in chlorinated solvents such as chloroform. Other poly‐(phthalazinone)s were soluble in dipolar aprotic solvents such as N,N′‐dimethylacetamide. The soluble poly(phthalazinone)s can be cast as flexible films from solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2481–2490, 2003     

Polyvinylpyrrolidone-Supported Hydroperoxide for Selective Oxidation of Aldehydes to Carboxylic Acids and Sulfides to Sulfoxides

The facile immobilization of hydroperoxide on the cross-linked poly(vinylpyrrolidone) is described by treatment of a poly(vinylpyrrolidone)-Vilsmeier adduct with (35%) hydrogen peroxide. The in situ–generated poly(vinyl pyrrolidone)-supported hydroperoxide reagent showed very good performance in chemoselective oxidation of aldehydes to carboxylic acids as well as sulfides to sulfoxides.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis and properties of novel cardo aromatic poly(ether‐benzoxazole)s

Three new bis(ether‐acyl chloride) monomers, 1,1‐bis[4‐(4‐chloroformylphenoxy)phenyl]cyclohexane ( 1a ), 5,5‐bis[4‐(4‐chloroformylphenoxy)phenyl]‐4,7‐methanohexahydroindan ( 1b ), and 9,9‐bis[4‐(4‐chloroformylphenoxy)phenyl]fluorene ( 1c ), were synthesized from readily available compounds. Aromatic polybenzoxazoles bearing ether and cardo groups were obtained by the low‐temperature solution polycondensation of the bis(ether‐acyl chloride)s with three bis(aminophenol)s and the subsequent thermal cyclodehydration of the resultant poly(o‐hydroxy amide)s. The intermediate poly(o‐hydroxy amide)s exhibited inherent viscosities in the range of 0.35–0.71 dL/g. All of the poly(o‐hydroxy amide)s were amorphous and soluble in many organic polar solvents, and most of them could afford flexible and tough films by solvent casting. The poly(o‐hydroxy amide)s exhibited glass‐transition temperatures (T_g's) in the range of 141–169 °C and could be thermally converted into the corresponding polybenzoxazoles approximately in the region of 240–350 °C, as indicated by the DSC thermograms. Flexible and tough films of polybenzoxazoles could be obtained by thermal cyclodehydration of the poly(o‐hydroxy amide) films. All the polybenzoxazoles were amorphous and showed an enhanced T_g but a dramatically decreased solubility as compared with their poly(o‐hydroxy amide) precursors. They exhibited T_g's of 215–272 °C by DSC and showed insignificant weight loss before 500 °C in nitrogen or air. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4014–4021, 2001     

Toward efficient functionalization of polystyrene backbone through ketene chemistry: Synthesis,characterization, and DFT study

In this study, polystyrene was functionalized with Meldrum's acid toward the introduction of the ketenes (CCO) system to its backbone for producing a dramatically reactive intermediate. Meldrum's acid, as a ketene source, was reacted by poly(styrene-co-p-chloromethyl styrene) through a simple nucleophilic reaction to synthesize poly(styrene-co-styryl Meldrum's acid). Then, the pendant Meldrum's acid under thermal treatment converted to ketene intermediate resulting in highly reactive polystyrenes derivatives, which rapidly reacted by nucleophilic reagents to afford ultimate organic building blocks. The polystyrene derivatives were characterized using elemental analysis, FT-IR, high-resolution solid-state NMR, thermogravimetric analysis (TGA), and differential thermogravimetric analysis (DTG). To clarify the evolutionary mechanisms of polystyrene products, density functional theory (DFT) method B3LYP with the 6–311++G(2d,p) basis set was used. We studied the preparation of polystyrene model compounds through Meldrum's acid thermolysis and nucleophilic substitution. The kinetic and thermodynamic parameters in all reactions and the structural and electronic properties of all molecules were calculated. These data exhibited that based on Gibbs Free energy values, the structure of syndiotactic polystyrene is more stable than that of isotactic polystyrene. Furthermore, it was found that the presence of an electron donor or acceptor substituent on the polystyrene structure affects the electronic bandgap.     

The synthesis and characterization of a poly(maleimide-ether) containing pendent thiophene rings

The preparation of a poly(maleimide-ether) containing pendent thiophene rings via the reaction of 2-(3-thienylmethyl)-1,3-N,N'-bis(3,4-dichloromaleimido) propane with 1,4-dihydroxybenzene is described. The novel 2-substituted-1,3-N,N'-bis(3,4-dichloromaleimido) propanes were obtained by allowing their corresponding diamine hydrochlorides to react with 3,4-dichloromaleic anhydride in acetic acid in the presence of sodium methoxide. The diamine hydrochlorides were prepared by the reduction of their respective diamides. The poly(maleimide-ether)s were fully characterized and ¹³C-NMR spectroscopy was used to confirm the microstructure of the materials. The properties of the thiophene substituted polymer are compared with model poly(maleimide-ether)s. Electrochemical studies indicated that the thiophene rings in the thiophene-substituted poly(maleimide-ether) were not electroactive. © 1992 John Wiley & Sons, Inc.     

Polymerization and copolymerization of α-alkylacrylic acids and characterization of their polymers

α-Alkylacrylic acids (RAA's) bearing n-alkyl groups were found to homopolymerize with slower rates than acrylic and methacrylic acids to number-average molecular, weight (M?_n) of 10⁴ or above. When the α-substituent was a branched alkyl group, the polymerization rate and M?_n decreased further. Reactivities of RAA's in copolymerization were interpreted by steric and resonance effects of the alkyl group using Hancock's steric substituent constant. Comparison of the reactivities of RAA's with those of methyl α-alkylacrylates revealed that replacement with the smaller carboxyl group facilitates polymerization and copolymerization. Preference of co-syndiotactic propagation in the copolymerization of methacrylic acid with styrene changed to random fashion in the copolymerization of the α-higher alkyl derivatives. After methylation with diazomethane, the homopolymers were shown to be thermally less stable than poly(methyl methacrylate). T_g's of poly(methyl α-ethylacrylate) and poly(methyl α-n-propylacrylate) were 57 and 25°C, respectively.     

A new route to semirigid poly(amide-ester)s with ordered structure

Four novel semirigid poly(amide-ester)s having the same ordered amide-amide-ester-ester (-AAEE-) and the same or the different phenyl structure were synthesized from the various combination of active acylamide of benzotriazole (HBT) such as 1,1′-(isophthaloyl)bisbenzotriazole (IPBBT) and 1,1′-(terephthaloyl)bisbenzotriazole (PBBT) with diols such as N,N'-bis(2-hydroxyethyl)isophthamide (HEIPA) and N,N'-bis(2-hydroxyethyl)terephthamide (HEPTA) which prepared from the selective N-acylation of IPBBT or PBBT with aminoethanol in excellent yield at room temperature. Before the preparation of diol monomers, a model reaction of selective N-acylation was also completed from active monoacylamide of benzotriazole, 1-benzoylbenzotriazole with aminoethanol. The ordered structure of poly(amideester)s were characterized by infrared (IR) and NMR spectra. On the bases of different reactivity between selective N-acylation and O-acylation of active acylamide of benzotriazole, poly(amide-ester)s having the ordered AAEE and the same phenyl structure were also readily synthesized from the IPBBT or PBBT with aminoethanol under mild conditions by one-bath process.     

Synthesis and copolymerization of oligo(lactic acid) derived norbornene macromonomers with amino acid derived norbornene monomer: Formation of the 3D macroporous scaffold

Norbornene macromonomers 2 and 3 bearing 10‐ and 20‐mers of lactide were synthesized by ring‐opening polymerization of lactide using 5‐norbornene‐2, 3‐exo‐exo‐dimethanol as an initiator and DBU as a catalyst. Macromonomers 2 and 3 were copolymerized with amino acid derived norbornene monomer 1 , using the Grubbs 2nd generation ruthenium catalyst. The random and block copolymers with M_n's ranging from 28,000 to 180,000 were obtained almost quantitatively where the M_n's of the block copolymers were higher than those of the random ones. Three‐dimensional macroporous structure polymers with average pore size of 10 µm could be found in poly( 1 ) and the block co‐polymer of 1 and 2 or 1 and 3 at the high ratio of 1 . Meanwhile, poly( 2 ) and poly( 3 ) along with block and random copolymers with low ratio of 1 exhibit much larger pores in the range of 50–300 µm. The porosity increased with increase in the unit ratio of 1 . The compressive strength of the porous structure of poly( 2 ) and poly( 3 ) was improved by the copolymerization with 1 . © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1660–1670     

Living ring-opening metathesis polymerization of norbornenes bay-functionalized perylene diimides

Ring-opening metathesis polymerization (ROMP)-derived poly(oxanorbornene imide)s bearing bay-linked mono - alkoxy -M1 and 1,7-di-alkoxy M2 functionalized perylene diimides (PDIs) were synthesized using Grubb's third ( G3 ) and Hoveyda-Grubbs second generation ( HG2 ) ruthenium-alkylidene metathesis initiators. The mono-alkoxy-derived PDI-based non-ladderphane polymer poly M1 displayed 67% to 77% of the trans olefin content in the polymer chain depending on the initiator used for the polymerization. When using the symmetrical 1,7-di-alkoxy-derived PDI-based polymer poly M2 having the ladderphane type-structure, this displayed a significant amount of cis and trans olefin contents in the polymer chains, irrespective of the type of initiators used for the polymerization. ROMP of both monomers M1 and M2 proceeded in a well-controlled manner with a linear dependence of molecular weight on the monomer/initiator ratio using G3 as initiator. Optical properties of the ladderphane-based poly M2 and non-ladderphane-based poly M1 were characterized in both solution and the film state. X-ray diffraction (XRD) analysis for all the polymers showed significant π-stacking in the thin film state with ordered molecular packing and closer values of d-spacing for both poly M1 and poly M2 . Film morphology examined by AFM elucidated homogenous smooth polymer surface for both polymers in general, but with some irregularities observed for poly M1 . In addition, CV analysis revealed both polymers could be good candidates as electron-accepting materials, with excellent film-forming ability, and thermal stability.     

Studies on the thermotropic liquid crystalline polymer. VI. Synthesis and properties of homo- and co-poly(amide-azomethine-ether)

Two series of poly(amide-azomethine-ether)s and poly(ester-azomethine-ether)s were prepared by the condensation of dialdehydes with N,N'-bis(aminobenzamide)s and 4,4′-bis(p-aminophenyl)terephthalester, respectively. The thermotropic liquid crystalline properties were examined by DSC microscopic observations. Almost half of the synthesized polymers exhibit thermotropic liquid crystalline properties which are in the nematic phase since threaded and/or Schlieren textures are observed under polarizing microscope. The effects of the number of amide group and the nature of the nonlinear bibenzamide moiety, which link in the rigid segment, on the thermotropic liquid crystalline properties of the homo- and co-poly(amide-azomethine-ether)s were also investigated.     

Synthesis and characterization of novel poly(amide urea)s,materials with outstanding mechanical properties

Four novel A‐B condensation monomers containing an amine and a carboxylic acid function are described, along with their polymerization to give main chain aromatic poly(amide urea)s. The monomers, and the polymer structural unit, are N,N′‐diphenylurea derivatives. When comparing wholly aromatic polyamides, or aramids, with the poly(amide urea)s described herein, we find that the chemical resistance to hydrolysis of the later polymers increases and their thermal resistance is diminished due to the main chain urea groups, whereas their water uptake is not greatly modified. The most striking result of the new poly(amide urea)s is their outstanding mechanical resistance: their Young's modulus rises as high as 5.5 GPa and their tensile strengths as high as 170 MPa for unoriented films prepared at laboratory scale by casting. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5398–5407, 2007     

Measuring the Elasticity of Poly‐l‐Proline Helices with Terahertz Spectroscopy

The rigidity of poly‐l ‐proline is an important contributor to the stability of many protein secondary structures, where it has been shown to strongly influence bulk flexibility. The experimental Young's moduli of two known poly‐l ‐proline helical forms, right‐handed all‐cis (Form I) and left‐handed all‐trans (Form II), were determined in the crystalline state by using an approach that combines terahertz time‐domain spectroscopy, X‐ray diffraction, and solid‐state density functional theory. Contrary to expectations, the helices were found to be considerably less rigid than many other natural and synthetic polymers, as well as differing greatly from each other, with Young's moduli of 4.9 and 9.6 GPa for Forms I and II, respectively.     

Synthesis and electrical conductivity of polymers containing trans-1,2-bis(9-carbazolyl)cyclobutane units

Novel poly-Schiff bases (PSB's) that contain trans-1,2-bis(9-carbazolyl)cyclobutane(DCZB) units were synthesized by the direct polycondensation of trans-1,2-bis(3-formyl-9-carbazolyl)cyclobutane with aromatic diamines in n-amyl alcohol at 160°C. Complexation of these PSB's and of poly(vinyl DCZB) (PVDCZB) with iodine produced cation-radical salts which resulted form the transfer of an electron from DCZB moieties to iodine. All the undoped polymers were insulators having electrical conductivity of the order of 10^?10–10^?12 S cm^?1 depending on the structure of polymers. By doping with iodine, the electrical conductivity increased by several orders of magnitude and reached a value of 10^?3 S cm^?1 in the case of PVDCZB and 10^?5–10^?6 S cm^?1 in the case of PSB's. The electrical conductivity of doped PSB's increased with decreasing diamine length. PVDCZB having the same iodine content per carbazole unit as poly(9-vinyl-carbazole) (PVK) has a greater electrical conductivity than PVK.     

Synthesis of novel oligoester‐block‐polyacrylate‐block‐oligoester ABA triblock copolymers by coupling methods

An original approach based on coupling methodology was used to prepare novel well‐defined ABA triblock copolymers, made of polyester‐type chain ends (A) associated with a polyacrylate midblock (B). Poly(ethylene terephthalate)‐block‐poly(lauryl acrylate)‐block‐poly(ethylene terephthalate) (PET‐b‐PLAc‐b‐PET) copolymers were achieved from poly(ethylene terephthalate)‐b‐poly(lauryl acrylate) (PET‐b‐PLAc) diblock ones. The first step consisted in the synthesis of diblock copolymers by atom transfer radical polymerization of lauryl acrylate starting from PET segment as a macroinitiator. In the second step, the coupling of diblock copolymers was achieved using four different methods, which were evaluated and compared: atom transfer radical coupling, “click” chemistry using the Huisgen's reaction, and coupling via a dithiol reagent or a diisocyanate molecule. Coupling using the Huisgen's reaction or a diisocyanate spacer proved to be the most efficient techniques. Even if these methods showed limitation and were only adapted for copolymers with low molecular weights, we managed to successfully prepare ABA triblock copolymers involving a polyester segment as end blocks and a polyacrylate moiety as midblock. To our knowledge, such kind of chemical structure has never been reported before and would be useful, possibly affording physical networks leading to rheological modification, for instance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Miscibility and interactions in blends of two proton‐donating polymers: Poly(acrylic acid)/poly(p‐vinylphenol) blends

Blends of poly(acrylic acid) (PAA) and poly(p‐vinylphenol) (PVPh) were prepared from N,N‐dimethylformamide (DMF) and ethanol solutions. The DMF‐cast blends exhibited single T_g's, as shown by modulated differential scanning calorimetry, whereas the ethanol‐cast blends had double T_g's. Fourier transform infrared spectroscopy showed that there was a specific interaction between PAA and PVPh in the DMF‐cast blends. The single‐T_g blends cast from DMF showed single‐exponential decay behavior for the proton spin–lattice relaxation in both the laboratory frame and the rotating frame, indicating that the two polymers mixed intimately on a scale of 2–3 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 789–796, 2003     

Preparation and properties of polybenzoxazine/poly(imide‐siloxane) alloys: In situ ring‐opening polymerization of benzoxazine in the presence of soluble poly(imide‐siloxane)s

Benzoxazine monomer (Ba) was blended with soluble poly(imide‐siloxane)s in various weight ratios. The soluble poly(imide‐siloxane)s with and without pendent phenolic groups were prepared from the reaction of 2,2′‐bis(3,4‐dicarboxylphenyl)hexafluoropropane dianhydride with α,ω‐bis(aminopropyl)dimethylsiloxane oligomer (PDMS; molecular weight = 5000) and 3,3′‐dihydroxybenzidine (with OH group) or 4,4′‐diaminodiphenyl ether (without OH group). The onset and maximum of the exotherm due to the ring‐opening polymerization for the pristine Ba appeared on differential scanning calorimetry curves around 200 and 240 °C, respectively. In the presence of poly(imide‐siloxane)s, the exothermic temperatures were lowered: the onset to 130–140 °C and the maximum to 210–220 °C. The exotherm due to the benzoxazine polymerization disappeared after curing at 240 °C for 1 h. Viscoelastic measurements of the cured blends containing poly(imide‐siloxane) with OH functionality showed two glass‐transition temperatures (T_g's), at a low temperature around ?55 °C and at a high temperature around 250–300 °C, displaying phase separation between PDMS and the combined phase consisting of polyimide and polybenzoxazine (PBa) components due to the formation of AB‐crosslinked polymer. For the blends containing poly(imide‐siloxane) without OH functionalities, however, in addition to the T_g due to PDMS, two T_g's were observed in high‐temperature ranges, 230–260 and 300–350 °C, indicating further phase separation between the polyimide and PBa components due to the formation of semi‐interpenetrating networks. In both cases, T_g increased with increasing poly(imide‐siloxane) content. Tensile measurements showed that the toughness of PBa was enhanced by the addition of poly(imide‐siloxane). Thermogravimetric analysis showed that the thermal stability of PBa also was enhanced by the addition of poly(imide‐siloxane). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2633–2641, 2001     

Electrical conductivity of N-substituted polyamides

The electrical volume and surface resistivity of some poly(N-chloroalkoxylmethyl caproamides) were measured as a function of voltage at 39% R. H. and under vacuum. The results were compared with non-N-substituted polycaproamide. Polarization and depolarization phenomena were observed. The mechanism of conduction is discussed, and important deviations from Ohm's law, observed in dry samples, suggest that charge carriers are injected from the electrodes and that the current–voltage characteristics may be interpreted on the assumption of space-charge-limited current theory.     

Structure,Properties and Biodegradation of Some Bacterial Copoly(hydroxyalkanoate)s

This article describes the relationships between not only comonomer-unit compositions but also their distributions and structures as well as properties for bacterial copoly(hydroxyalkanoate)s, including poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3-hydroxybutyrate-co-3-hydroxy-propionate), poly(3-hydroxybutyrate-co-3-hydroxyhexanoate), poly(3-hydroxy-butyrate-co-4-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-mercapto-propionate). It was found that as-produced copoly(hydroxy-alkanoate)s have broad comonomer-unit compositional distributions, which we can control to some degree. The structure and properties of copoly(hydroxy-alkanoate)s depend not only on the chemical structure and the comonomer-unit composition but also on the comonomer-unit compositional distribution.     

LC polyimides. XXVII. Cholesteric poly(ester-imide)s derived from chiral i-pentyloxyterephthalic acids

(S)-Pentyloxyterephthalic acid was prepared by alkylation of dimethyl trimethylsiloxyterephthalate with (S)-2-methylbutan-1-ol tosylate. (S,S)-2,5-bis-i-pentyloxyterephthalic acid was prepared analogously by alkylation of diethyl-2,5-bis(trimethylsiloxy)terephthalate. A series of cholesteric poly(ester-imide)s was synthesized from (S)-pentyloxyterephthalic acid and N-(4'-hydroxyphenyl)-4-hydroxyphthalimide. 2-(4'-Chlorophenoxy)terephthalic acid was used as comonomer. The 1 : 1 copolyester of both terephthalic acids forms a Grandjean texture in the shearing of the cholesteric melt. A second series of cholesteric poly(ester-imide)s was prepared from (S,S)-2,5-bispentyloxyterephthalic acid and the aforementioned imide diphenol. In this case 2,5-bis(dodecyloxy)terephthalic acid was used as comonomer to lower the melting point. The cholesteric phases of the resulting copoly(ester-imide)s did not form a Grandjean texture. © 1996 John Wiley & Sons, Inc.     

Correlation between the mechanical properties and the homogeneity of some photopolymerized acrylic/methacrylic networks1

Proton T_1ρ data obtained by CP/MAS solid-state ¹³C NMR at 100.56 MHz for different polyacrylate networks were correlated with their mechanical properties in order to determine the best mixture in terms of stress-at-break (σ), Young's modulus of elasticity (Y), and homogeneity of the monomers that are forming the solid network. The mixtures were formed by the photopolymerization of 40% trimethylolpropane triacrylate (TMPTA), 40% dipentaerythritol pentaacrylate (DPHPA), and 20% of a monomer from a series of poly(ethylene glycol) and poly(ethylene) dimethacrylate. Proton T_1ρ's in networks were not quite averaged to a single value by spin diffusion as in polymer blends, indicating extensive intermixing of TMPTA and DPHPA in forming the network, but with phase separation between the dimethacrylate homopolymer and the rest of the network that is dependent on the laser power. The stress-at-break and the Young's modulus of elasticity were determined for each of the mixtures at different values of the laser power used for the polymerization. © 1996 John Wiley & Sons, Inc.