Synthesis and characterization of sulfone-containing polyesters derived from 4,4′-dicarboxydiphenyl sulfone by direct polycondensation

Several sulfone-containing polyesters having inherent viscosities 0.43-0.19 dL g^?1 were prepared by direct polycondensation of 4,4′-dicarboxydiphenyl sulfone (DCDPS) with various aromatic and aliphatic diols, by p-toluenesulfonyl chloride and N,N′-dimethylformamide in pyridine solution. The polyesters were examined by elementary analysis, IR spectra, inherent viscosity, x-ray diffraction, solubility, DSC, and TGA. The diffraction diagram showed that all polyesters were crystalline except that obtained from bisphenol-A. All polymers were soluble in sulfonic acid (18M), phenol and p-chlorophenol, but not in acetone and toluene. These polymers obtained from aromatic bisphenols lost no mass below 325°C, but 10% loss of mass was recorded above 396°C in nitrogen. DCDPS copolymerized with isophthalic acid (IPA) and bisphenol-A had inherent viscosity up to 0.49 dL g^?1, with relatively narrow distribution of molar mass . © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of aromatic poly (ether sulfone)s and poly (ether ketone)s based on methyl-substituted biphenyl-4,4′-diols

Novel methyl-substituted aromatic poly (ether sulfone)s and poly (ether ketone)s were synthesized from combinations of 3,3′,5,5′-tetramethylbipheny-4,4′-diol and 2,2′,3,3′,5,5′-hexamethylbiphenyl-4,4′-diol, and 4,4′-dichlorodiphenyl sulfone and 4,4′-difluorobenzo-phenone by nucleophilic aromatic substitution polycondensation. The polycondensations proceeded quantitatively in a N-methyl-2-pyrrolidone-toluene solvent system in the presence of anhydrous potassium carbonate to afford the polymers with inherent viscosities between 0.86 and 1.55 dL/g. The methyl-substituted poly (ether sulfone)s and poly (ether ketone)s showed good solubility in common organic solvents such as chloroform, tetrahydrofuran, pyridine, m-cresol, and N,N-dimethylacetamide. The tetramethyl- and hexamethyl-substituted aromatic polyethers had higher glass transition temperatures than the corresponding unsubstituted polymers, and did not decompose below 350°C in both air and nitrogen atmospheres. The films of the methyl-substituted poly (ether ketone)s became insoluble in chloroform by the irradiation of ultraviolet light, indicating the occurrence of photochemical crosslinking reactions. © 1994 John Wiley & Sons, Inc.     

Synthesis and thermal polymerization of aromatic 2‐oxazolines containing carboxylic groups

2‐(4‐Carboxyphenyl)‐1,3‐oxazoline ( 2 a ), 2‐(3‐carboxyphenyl)‐1,3‐oxazoline ( 2 b ), and 2‐(6‐carboxynaphthyl‐2‐yl)‐1,3‐oxazoline ( 2 c ) were synthesized by reaction of monomethyl ester chlorides of aromatic dicarboxylic acids with 2‐chloroethylamine hydrochloride in the presence of triethylamine followed by cyclization with methanolic KOH. Thermal polymerization in bulk within a few minutes at 200–220°C resulted in new linear poly(ester amide)s 3 a – 3 c without significant side reactions. The polymerization occurred in the melt phase ( 2 b ) or in the solid state ( 2 a , 2 c ) and the resulting polymers are amorphous ( 3 b ) or semi‐crystalline ( 3 a , 3 c ). The polyaddition reactions were investigated by means of differential scanning calorimetry (DSC) and ¹H NMR spectroscopy.     

Synthesis of aromatic polyethers by Scholl reaction. II. On the polymerizability of 4,4′-bis(phenoxy)diphenyl sulfones and of 4,4′-bis(phenythiol)diphenyl sulfone

4,4′-Bis(phenoxy)diphenyl sulfone ( 1 ), 4,4′-bis(phenylthio)diphenyl sulfone ( 2 ), and 1 substituted with various electron-donating groups in the phenoxy units were synthesized and polymerized under oxidative reaction conditions. The presence of methyl, tert-butyl, and methoxy groups as substituents on the phenoxy groups of 1 increases both the yield and the solubility of the resulting polymers. The structure-reactivity relationship of the monomers and of the growing species were discussed based on a radical-cation mechanism of polymerization. Monomers of high nucleophilicity and resonance stabilized radical-cation growing species are crucial to achieve polymers of high molecular weight. The structure of the polymers and in several cases of their chain ends were determined by ¹H-NMR spectroscopy. The mechanism of termination and the side reactions occuring during this polymerization process were discussed based on the structure of the resulting polymers.     

Synthesis of aromatic polyethers by Scholl reaction. I. Poly(1,1′-dinaphthyl ether phenyl sulfone)s and poly(1,1′-dinaphthyl ether phenyl ketone)s

A novel synthetic method for the preparation of high molecular weight aromatic polyethers is presented. It consists in the Scholl reaction of di(1-naphthyl) ethers of aromatic derivatives exhibiting lower nucleophilicity and higher oxidation potential than the 1-naphthoxy groups. The examples described in this paper refer to the synthesis of aromatic polyether sulfones and aromatic polyether ketones by the polymerization of 4,4′-di(1-naphthoxy)diphenyl sulfone and respectively 4,4′-di(1-naphthoxy)benzophenone. Both polymerization reactions are performed at room temperature in nitrobenzene, using anhydrous FeCl₃ as catalyst, and apparently follow a “reactive intermediate polycondensation” polymerization mechanism.     

Factors affecting H2O absorption of the epoxy tetraglycidyl-4,4′-diaminodiphenyl methane cured with diaminodiphenyl sulfone

It was found that the amount of water absorbed at room temperature in cured tetraglycidyl-4,4′-diaminodiphenyl methane/diaminodiphenyl sulfone epoxy resins increases as the curing time or temperature increases while the amount of tetrahydrofuran-soluble extractables and the room temperature density decreases. These data suggest that the free volume increases with the extent of cure and the resins become more accessible to water. While the driving force for water absorption is the electrostatic attraction between water and the functional groups in the epoxy, the results suggest that equilibrium H₂O absorption is determined primarily by unoccupied volume of the epoxy resin.     

Synthesis of 2′,3′-dihydrospiro[benzofuran-2(3H),4′(1′-H)isoquinoline]s. A novel heterocyclic ring system

The synthesis of a novel 2′,3′-dihydrospiro(benzofuran-2(3H),4′(1′H)isoquinoline] ring system ( IV ) by a nucleophilic aromatic fluoride displacement-cyclization is described. Preparation of various derivatives of IV as well as the precursor 4-(2-fluorobenzyl)-1,2,3,4-tetrahydro-4-isoquinolinols is also described.     

Synthesis of new non‐symmetrical substituted 7,7′‐bisindolizines by the direct reaction of 4,4′‐bipyridinium‐ylides with dimethyl acetylenedicarboxylate

We report here on the synthesis of some novel non‐symmetrical substituted bisindolizines by 3+2 dipolar cycloaddition reaction. New compounds were prepared by the direct reaction of isolated non‐symmetrical substituted 4,4′‐bipyridinium bisylides with dimethyl acetylenedicarboxy late (DMAD). The obtained compounds can be used as precursors of fluorescent markers in fluorometric analysis.     

4,4′‐Bipyridine‐1,1′‐diium acetylenedicarboxylate: a new member of the (H2bipy)[Cu(ox)2] (bipy is 4,4′‐bipyridine and ox is oxalate) family

4,4′‐Bipyridine‐1,1′‐diium (H₂bipy) acetylenedicarboxylate, C₁₀H₁₂N₂²⁺·C₄O₄²⁻, (1), is a new member of a family of related structures with similar unit‐cell parameters. The structures in this family reported previously [Chen et al. (2012). CrystEngComm, 14 , 6400–6403] are (H₂bipy)[Cu(ox)₂] (ox is oxalate), (2), (H₂bipy)[NaH(ox)₂], (3), and (H₂bipy)[H₂(ox)₂], (4). Compound (1) has a one‐dimensional structure, in which H₂bipy²⁺ cations and acetylenedicarboxylate (ADC²⁻) anions are linked through a typical supramolecular synthon, i.e.R₂²(7), and form linear `–cation–anion–' ribbons. Through an array of nonclassical C—H...O hydrogen bonds, adjacent ribbons interact to give two‐dimensional sheets. These sheets stack to form a layered structure viaπ–π interactions between the H₂bipy²⁺ cations of neighbouring layers. The supramolecular isostructurality of compounds (1)–(4) is ascribed to the synergistic effect of multiple interactions in these structures. The balanced strong and weak intermolecular interactions stabilizing this structure type include strong charge‐assisted N—H...O hydrogen bonds, C—H...O contacts and π–π interactions.     

Synthesis and characterization of novel aromatic polyimides from 4,4‐bis(p‐aminophenoxymethyl)‐ 1‐cyclohexene

A novel diamine, 4,4‐bis(p‐aminophenoxymethyl)‐1‐cyclohexene (CHEDA), was synthesized from 4,4‐bis(hydroxymethyl)‐1‐cyclohexene and p‐chloronitrobenzene by nucleophilic aromatic substitution and subsequent catalytic reduction of the intermediate dinitro compound. A series of aromatic polyimides were prepared from CHEDA and commercial dianhydrides with varying flexibility and electronic character in two‐step direct polycondensation reactions. High molecular weight polyimides with intrinsic viscosities between 0.57 and 10.2 dL/g were obtained. Most of these polyimides, excluding those from PMDA and BPDA, were soluble in polar aprotic solvents such as NMP and DMAc, and many were also soluble in CHCl₃ and THF. DSC analysis revealed glass transitions in the range of 190 to 250°C. No significant weight losses occurred below 450°C in nitrogen and 350°C in air. Bromination and epoxidation of cyclohexene double bond in CHDEA–6FDA (3e) were investigated as examples of possible polymer modifications. Qualitative epoxidation and selective bromination of the double bond were demonstated. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1189–1197, 1999     

Synthesis and structural analysis of (E)‐2‐(2′‐nitrovinyl)indoles from the corresponding 2‐formylindole derivatives

Preparation of 2‐formylindoles was carried out from the appropriate methylindole by oxidation with selenium dioxide and by Vilsmeier formylation. The 2‐(2′‐nitrovinyl)indoles have been obtained by condensa tion of 2‐formylindoles with nitroalkanes in the presence of ammonium chloride in good yields. In this reac tion, only the (E)‐isomer of the 2‐(2′‐nitrovinyl)indoles was observed by ¹H nmr and NOE experiments. Evidence for an extended conjugation through the double bond and the nitro group can be evaluate by the deshielding effect on the olefinic protons. Moreover, the non‐Beer's law behaviour in the uv‐visible spectra suggest the existence of some sort of complex for these compounds.     

Synthesis of 4,4′‐bis (4‐oxyphenoxy)benzophenone diglycidyl ether and the thermal stability for blends with 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexanecarboxylate

We synthesized novel aromatic epoxy, 4,4′‐bis(4‐oxyphenoxy)benzophenone diglycidyl ether (DGEEK), by a three step reaction sequence and then it was blended with 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexanecarboxylate (CAE). The DGEEK structure was confirmed by FT‐IR and ¹H‐NMR measurement. Also, we investigated thermal properties of DGEEK/CAE blend epoxy by differential scanning calorimeter (DSC) and thermogravimetry analyzer (TGA). The glass transition temperature increased but initial decomposition temperature of cured epoxy decreased through the increasing amounts of ether–ether–ketone group of the epoxy network structure. By increasing the DGEEK mole fraction in the DGEEK/CAE blend epoxy matrix, the curing peak temperature decreased and the curing activation energy for DGEEK/CAE blend epoxy systems showed a considerable decrease. Copyright © 2001 John Wiley & Sons, Ltd.     

Structural Variety of Cobalt(II), Nickel(II), Zinc(II), and Cadmium(II) Complexes with 4,4′‐Azopyridine: Synthesis,Structure and Luminescence Properties

Self‐assembled bi‐ and polymetallic complexes of Co^II, Ni^II, Zn^II, and Cd^II were obtained by the reaction of 4,4′‐azopyridine (azpy) with metal tri‐tert‐butoxysilanethiolates (Co, 1 ; Cd, 2 ), acetylacetonates (Ni, 3 ; Zn, 4 ), and acetates (Cd, 5 ). All compounds were characterized by single‐crystal X‐ray structure analysis, elemental analysis, FTIR spectroscopy, and thermogravimetry. Complexes 1 , 2 and 4 , 5 exhibit diverse structural conformations: 1 is bimetallic, 2 and 4 are 1D coordination polymers, and 5 is a 2D coordination framework formed from bimetallic units. The obtained complexes contain metal atoms bridged by a molecule of azpy. The luminescent properties of 1–5 were investigated in the solid state.     

Synthesis of homopolymers bearing novel chromophore 4‐oxy‐4′‐(vinylbarbituratephenyl)azobenzene for nonlinear optical applications

The synthesis of new acrylate, methacrylate, and styrene with 4‐(oxyethoxy)‐4′‐vinylbarbituratephenyl azobenzene chromophore are described. The monomers were well characterized (NMR, UV, and IR) for the structure. These were then homopolymerized and characterized for spectral responses and thermal properties. The stronger acceptor barbiturate would result in more effective second harmonic generation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 962–971, 2000     

Synthesis of autophotosensitive hyperbranched polyimides based on 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride and 1,3,5‐tris(4‐aminophenoxy)benzene via end capping of the terminal anhydride groups by ortho‐alkyl aniline

Benzophenone‐containing, anhydride‐terminated hyperbranched poly(amic acid)s were end‐capped by ortho‐alkyl aniline in situ and then chemically imidized, yielding autophotosensitive hyperbranched polyimides. The polyimides were soluble in strong polar solvents, such as N‐methyl‐2‐pyrrolidone, N‐dimethylformamide, dimethylacetamide, and dimethyl sulfoxide. Thermogravimetric analysis revealed their excellent thermal stability, with a 5 wt % thermal loss temperature in the range of 527–548 °C and a10 wt % thermal loss temperature in the range of 562–583 °C. The strong absorption of the polyimide films in ultraviolet–visible spectra at 365 nm indicated that the hyperbranched polyimides were patternable. Highly resolved images with a line width of 6 μm were developed by ultraviolet exposure of the polymer films. A well‐defined image with lines as thin as 3 μm was also patterned, but the lines were rounded at the edges. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2026–2035, 2003     

A three‐dimensional supramolecular framework of silver(I), 2‐phenylquinoline‐4‐carboxylate and 4,4′‐bipyridine

A novel supramolecular framework, catena‐poly[[[aqua(2‐phenylquinoline‐4‐carboxylato‐κO)silver(I)]‐μ‐4,4′‐bipyridine‐κ²N:N′] dihydrate], {[Ag(C₁₆H₁₀NO₂)(C₁₀H₈N₂)(H₂O)]·2H₂O}_n, has been synthesized and structurally characterized. The Ag^I centres are four‐coordinated and bridged by 4,4′‐bipyridine (4,4′‐bipy) ligands to form a one‐dimensional Ag–bipy chain. The Ag–bipy chains are further linked together by intermolecular O—H...O and O—H...N hydrogen‐bonding interactions between adjacent chains, resulting in a three‐dimensional framework.     

Synthesis of N,N,N-4,4＂-Di-（4-methylphenyl）-2,2＇：6＇,2＂- terpyridine-N,N,N-tris（isothiocyanato） Ruthenium（Ⅱ） and Application to Colorimetric Hg^2＋ Sensor

A terpyridine derivative DPTP [di-（4-methylphenyl）-2,2＇：6＇,2＂-terpyridine] was conveniently synthesized from 2-bromopyridine via halogen-dance reaction, Kharash coupling and Stille coupling reaction. Then its corresponding ruthenium complex Ru-DPTP [N,N,N-4,4＇＇-di-（4-methy,phenyl）-2,2＇：6＇,2＂-terpyridine-N,N,N-tris（is,-thi,cyanat,）- ruthenium（H） ammonium] was obtained and fully characterized by IR, UV-Vis, ESI MS and elemental analysis. The MLCT absorption band of Ru-DPTP was blue-shifted from 570 to 500 nm upon addition of Hg^2＋. Among a series of surveyed metal ions, the complex showed a unique recognition to Hg^2＋, indicating that it can be used as a selective colorimetric sensor for Hg^2＋.