Melt block copolymerization of ϵ-caprolactone and L-lactide

AB block copolymers of ϵ-caprolactone and (L )-lactide could be prepared by ring-opening polymerization in the melt at 110°C using stannous octoate as a catalyst and ethanol as an initiator provided ϵ-caprolactone was polymerized first. Ethanol initiated the polymerization of ϵ-caprolactone producing a polymer with ϵ-caprolactone derived hydroxyl end groups which after addition of L -lactide in the second step of the polymerization initiated the ring-opening copolymerization of L -lactide. The number-average molecular weights of the poly(ϵ-caprolactone) blocks varied from 1.5 to 5.2 × 10³, while those of the poly(L -lactide) blocks ranged from 17.4 to 49.7 × 10³. The polydispersities of the block copolymers varied from 1.16 to 1.27. The number-average molecular weights of the polymers were controlled by the monomer/hydroxyl group ratio, and were independent on the monomer/stannous octoate ratio within the range of experimental conditions studied. When L -lactide was polymerized first, followed by copolymerization of ϵ-caprolactone, random copolymers were obtained. The formation of random copolymers was attributed to the occurrence of transesterification reactions. These side reactions were caused by the ϵ-caprolactone derived hydroxyl end groups generated during the copolymerization of ϵ-caprolactone with pre-polymers of L -lactide. The polymerization proceeds through an ester alcoholysis reaction mechanism, in which the stannous octoate activated ester groups of the monomers react with hydroxyl groups. © 1997 John Wiley & Sons, Inc.     

Lactone polymers. VIII. Dynamic mechanical properties of ϵ-caprolactone and γ-(tert-butyl)-ϵ-caprolactone copolymers

The temperature dependencies of dynamic mechanical properties have been determined with a torsional pendulum for copolymers of ?-caprolactone and γ-(tert-butyl)-?-caprolactone over the entire composition range. Copolymers containing at least 25 mol % (33 wt %) of γ-(tert-butyl)-?-caprolactone units are amorphous in nature. The experimentally obtained glass transition temperatures of the copolymers and poly(γ-(tert-butyl)-?-caprolactone) were used to calculate the glass transition temperature of amorphous of poly(?-caprolactone) according to the Fox relation. This value of ?70°C is in excellent agreement with values obtained from similar calculations based on compatible blends of poly(?-caprolactone) with other homopolymers.     

Lactone polymers. III. Polymerization of ε-caprolactone

Polymerization of ε-caprolactone catalyzed by dibutylzine and triisobutylaluminum has been examined. Monomer conversion and polymer molecular weight increase simultaneously during the polymerization suggesting a living polymer system. Also, molecular weight is proportional to the reciprocal of catalyst concentration. However, the polymer molecular weights are three to five times that which would be calculated from the catalyst concentration assuming a living polymer system. In addition, fractionation of poly-ε-caprolactone prepared with dibutylzinc revealed that the distribution is considerably broader than expected for a Poisson distribution. While no mechanistic explanation for the broad molecular weight distribution observed has been defined, examination of the metal alkyl-catalyzed polylactones shows that the molecular weight distributions can and do change with time. This change is due to an ester interchange process occurring subsequent to polymerization. This phenomenon can be used to change the molecular weight distribution from very broad to the most probable distribution.     

Microspheres by dispersion polymerization of lactides and ϵ-caprolactone

Polyester microspheres were synthesized by the ring-opening polymerization of lactides (racemate or optically active L,L-isomer) and ϵ-caprolactone. Polymerizations were carried out in the 1,4-dioxane-heptane mixed solvents in the presence of poly(dodecyl acrylate)-g-poly(ϵ-caprolactone) (poly(DA-CL)) used as surface-active agent. Polymerizations were initiated with tin(II) 2-ethylhexanoate (lactides), diethylaluminum ethoxide or sodium trimethylsilanolate (ϵ-caprolactone). In the studies of the polymerization of lactides, relations were determined between diameters, the distribution of diameters of synthesized microspheres, and the structure of poly(DA-CL). It was found that it is possible, depending on thermal treatment of microspheres after synthesis, to obtain polylactide microspheres differing in the degree of crystallinity. Kinetics of the dispersion pseudoanionic and anionic polymerizations of ϵ-caprolactone were also investigated and the results of these studies were compared with the data for the corresponding polymerizations of ϵ-caprolactone in solution.     

Controlled polymerization of ϵ-caprolactone -from macromolecules to microspheres

Pseudoanionic polymerization of ϵ-caprolactone (CL), initiated with dialkylaluminum alkoxides, was used for the tailored synthesis of poly(CL) with M̄_n ≤ 100 000 and M̄_w /M̄_n < 1. 20. Macromolecules with functional groups at one or at both ends were obtained in this way. Controlled polymerization of CL allowed to prepare poly(dodecyl acrylate)-g-poly(ϵ-caprolactone) (poly(DAC)-g-poly(CL)) with well defined poly(CL) grafts. These copolymers were used as the surface active agents for the direct synthesis of poly(CL) microspheres. The number average diameter (D̄_n ) of poly(CL) microspheres varied from 0.628 μm to 0.94 μm and the diameter polydispersity (D̄_v /D̄_n ) varied from 1.038 to 1.26, depending on the composition of poly(DAC)-g-poly(CL). Human serum albumin (HSA) and human gamma globulins (_γ G) were attached to the poly(CL) microspheres. The maximal surface concentrations of HSA and _γ G adsorbed onto the microspheres were equal to 9·10⁻⁴ g/m² and 2.0·10⁻³ g/m² respectively.     

Polymerization of glycolide promoted by ω-Al-alkoxide poly(ϵ-caprolactone) macro-initiators and formation of stable colloidal dispersions

Block polymerization of glycolide (GA) and ϵ-caprolactone (ϵ-CL) has been initiated with aluminum alkoxides, such as Al(OⁱPr)₃ and Et₂AlOCH₂X (where X = -CH₂-Br and -CH₂O-C(O)-C(Me)=CH₂), in THF at 40°C. Structure and composition of block copolyesters have been characterized with respect to the molecular weight by NMR spectroscopy and thermal analysis. Copolymerization is typically living, so that block copolyesters have been synthesized with predictable molecular weight and composition. The inherent insolubility of polyglycolide block is responsible for the heterogeneity of the polymerization medium and formation of stable, non-aqueous colloidal dispersions. This effect is especially pronounced at high GA/ϵ-CL molar ratios. Colloidal dispersions have been analyzed by transmission electron microscopy (TEM) and photocorrelation spectroscopy (PCS).     

Hydrogen bonded complexes of ϵ-caprolactam

The ultraviolet absorption band of a complex between 9-ethyladenine and ∈-caprolactam has been observed at a wavelength longer than that of the absorption band for the 9-ethyladenine monomer. Absorbance values (at 277.5 mμ) of solutions that contained 9-ethyladenine and different concentrations of ∈-caprolactam in cyclohexane were determined at different temperatures. Linear plots were utilized to determine the apparent association constant (K′ ) of the 9-ethyladenine-caprolactam complex over the range of 25° to 60°. The K′ values for the complex of 4-aminopyrimidine and ∈-caprolactam were determined for the same temperature range from the absorbance of cyclohexane solutions at 282.5 mμ. The K' values of the two complexes are the same at 25°, but ∈-caprolactam is more strongly bonded to 9-ethyladenine than to 4-aminopyrimidine at elevated temperatures. The synthesis of 4-amino-1-ethylbenzimidazole hydro-chloride was performed. An attempt to detect a complex between ∈-caprolactam and 4-amino-1-ethylbenzimidazole in a cyclohexane solution was not successful.     

Anionic polymerization of lactones initiated by alkali graphitides. I. Polymerization of ϵ-caprolactone initiated by KC24

The influence of the reaction conditions (time, temperature, concentrations of the monomer, and the initiator) on the amount and composition of the oligomers and high molecular products formed during the heterogeneous anionic polymerization of ?-caprolactone was investigated. The polymerization was initiated by KC₂₄ in xylene or tetrahydrofuran. Conditions were found under which intra- and intermolecular transesterification was strongly suppressed, thus providing the opportunity for the formation of polyesters with viscometric molecular masses of more than 300,000 and good yields (80% and higher). The total quantity of products with a viscometric molecular mass below 2500 did not exceed 15%; that of the cyclic dimer was not in excess of 5%. Peculiar features of the KC₂₄ initiated polymerization are the insignificant rise in the number of oligomers and the formation of high polymers even in strongly diluted solutions of ?-caprolactone (0.2 mol/L and lower). The quantity and molecular mass of the polymers obtained decreased as the temperature increased. It was also established that the polymerization of the cyclic dimer of ?-caprolactone is not initiated by KC₂₄.     

Cationic polymerization of ϵ-caprolactone in the presence of diols via activated monomer mechanism

The kinetics of noncatalytic and catalytic interaction of ϵ-caprolactone (ϵ-CL) with a variety of diols in the presence of onium-type catalysts as well as the resulting products structure were investigated. The phenomenon of the direction change of the lactone ring opening during the interaction with hydroxyl-containing compounds of different functionality was discovered. The features of the reactions investigated were discussed and their kinetic parameters were determined.     

Synthesis and characterization of highly random copolymer of ϵ-caprolactone and D,L-lactide using rare earth catalyst

Highly random copolymers of ϵ-caprolactone (CL) and D ,L -lactide (LA) were synthesized by a new catalyst system, rare earth chloride–propylene oxide (PO) system. In the presence of propylene oxide, all rare earth chlorides tested are highly effective for the copolymerization. The influences of reaction conditions on the copolymerization catalyzed by the NdCl₃-5PO system have been investigated in detail. The reactivity ratios of ϵ-caprolactone and D ,L -lactide were determined and show that the copolymerization with this new rare earth catalyst is closer to ideal copolymerization than reported for other catalysts. The microstructure of copolymer analyzed by ¹³C-NMR shows that the monomer units in the copolymer is near to completely random distribution with a short average monomer sequence length. The DSC measurement confirms the high randomness of the chain structure. The mechanism studied by NMR indicates that the rare earth alkoxide generated by the reaction of rare earth chloride with propylene oxide initiates the copolymerization, and then proceeds via a “coordination-insertion” mechanism with acyl-oxygen bond cleavage of CL and LA. © 1996 John Wiley & Sons, Inc.     

Kinetics of ε-caprolactone polymerization on dialkylaluminum alkoxides

Polymerization of ε-caprolactone initiated with dialkylaluminum alkoxides is a living system; formation of macrocyclics is fully depressed. Polymerization initiated with diethylaluminum alkoxide and diisobutylaluminum alkoxide proceeds on monomeric (deaggregated) active species, reversibly aggregating into trimers for the former and into dimers for the latter initiator. Kinetic treatment of this system allowed to determine simultaneously the aggregation-deaggregation equilibrium constant and the rate constant of propagation. Propagation most probably proceeds with insertion (pseudoanionically). Application of amines, complexing the growing species, allowed to break down the aggregates; polymerization became firstorder in initiator. Only secondary amines complexed strongly enough with growing species, the tertiary ones did not affect polymerization, at least up to the ratio 2:1 ([amine]/[initiator]^o). Rate constants of propagation in all of the studied^o systems, whether aggregated or not, have been found to be the same and equal to 0, 04 1·mol⁻¹·s⁻¹ at 25° in THF solvent. This value is approx. 10² times lower than for ion-pairs at these conditions. Moreover, rate constants are almost the same for the growing species …-OAl(C₂H₅)₂ and …-OAl(i-C₄H₉)₂, although aggregation is very much influenced by the size of the alkyl groups.     

Binary and ternary poly(lactic acid)/poly(ϵ-caprolactone) blends: The effects of oligo-ϵ-caprolactones upon mechanical properties

Oligo-ε-caprolactones(o-CL) have been utilized as principle secondary components within poly(lactic acid)[PLA]-based blends as well as additives within larger-sized PCL/PLA blends in an effort to fully complement the mechanical attributes of the respective polyesters. Dynamic mechanical thermal analysis(DMTA) shows that the presence of o-CL plasticizes the PLA non-crystalline phase with a more pronounced effect seen as the size of o-CL is reduced. Moreover, it appears that the size of o-CL could also affect the static mechanical properties of the ternary systems as material stiffness and strength reside between those properties measured for high molecular weight PCL/PLA binary blends and the PLA homopolyester. Future work will examine the ability of these blends to sustain these properties during hydrolytic exposure.     

Polymerization in the crystalline state. VIII. Polymerization in N-carboxy anhydrides of γ-benzyl glutamate, γ-methyl glutamate,and ϵ-carbobenzoxylysine

The kinetics of the solid-state polymerization of the N-carboxy anhydrides (NCA) of the L - and racemic forms of γ-benzyl glutamate (BG), γ-methyl glutamate (MG), and ?-carbobenzoxylysine (CL) were studied as a function of temperature and aqueous vapor pressure. The reaction of the L -forms of BG and MG was characterized by an induction period, while the CL derivative reached its maximum polymerization rate at the outset of the reaction. Water vapor had only a minor effect in accelerating the reaction and reducing the chain length of the polypeptides formed. The racemic monomers were found to have different crystal structures from those of the L -isomers and the racemic MG and CL derivatives polymerized much more slowly than the corresponding optically active crystals. All polymers gave diffuse x-ray diffraction patterns. Infrared spectra of the L -polypeptides showed that they were largely in the α-helical form. The polymer derived from the racemic BG–NCA had a content of α-helical material which suggested that it consisted of polypeptides with long blocks of D and L residues.     

Synthesis and characterization of poly(ϵ-caprolactone)-poly(ethylene glycol) block copolymer

Poly(ϵ-caprolactone)–poly(ethylene glycol)–poly(ϵ-caprolactone) triblock copolymers (PECL) covering a wide range of poly(ethylene glycol) (PEG) lengths were synthesized with alkali metal alkoxide derivatives of poly(ethylene glycol). The effects of various factors, such as amount of the initiator, reaction time and temperature, polarity of solvent, length of PEG segment, and counterion on the polymerization were investigated. The copolymers were characterized by ¹H-NMR, IR, GPC, and DSC. It was found that THF system is superior to toluene system. The conversion of the monomer increased with increase of the initiator concentration. High molecular weight of the copolymer and high conversion of the monomer was obtained at below 30°C within 5 min. The polymerization process was studied by GPC and the coexistence of propagation and transesterification reaction was found, which leaded to relatively broad molecular weight distribution of the copolymers. © 1997 John Wiley & Sons, Inc.     

Proton NMR characterization of chain structure in butylene terephthalate-ϵ-caprolactone copolyesters

A series of butylene terephthalate-ϵ-caprolactone copolyesters (BCL) with different hard-segment content were synthesized and their chain structures were carefully investigated by high resolution ¹H-NMR spectroscopy. The analysis from ¹H-NMR spectra of samples reveals that BCL chain chemical and sequence structure is specific and complicated because of the unavoidable transesterification between BT and CL segments during synthesis process and so BCL copolyesters are segmented copolyesters with certain random property as confirmed by DSC measurements. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3770–3777, 1999     

Ring‐opening polymerization of ϵ‐caprolactam and ϵ‐caprolactone via microwave irradiation

A novel process for synthesizing nylon‐6 and poly(?‐caprolactone) by microwave irradiation of the respective monomers, ?‐caprolactam and ?‐caprolactone, is described. The ring opening of ?‐caprolactam to produce nylon‐6 was performed in a microwave oven by the forward power being controlled to about 90–135 W in the presence of an ω‐aminocaproic acid catalyst (10 mol %) and for periods of 1–3 h at temperatures varying from 250 to 280 °C. The ring opening of ?‐caprolactone to produce poly(?‐caprolactone) was performed in a microwave oven by the forward power being controlled to about 70–100 W for a period of 2 h in the presence of stannous octoate with and without 1,4‐butanediol over a temperature range of 150–200 °C. The yields, conditions of the reactions, and properties of the products generated relative to the thermal processes are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2264–2275, 2002     

Aliphatic polyesters. III. Molecular weight and molecular weight distribution in alcohol-initiated polymerizations of ϵ-caprolactone

The effect of initiation of ?-caprolactone polymerization with mono- and polyfunctional alcohols was investigated. The resulting linear and starshaped polymers were characterized by measurement of the molecular weight and molecular weight distribution. The polymerizations were characterized by (1) rapid initiation, (2) invariance of the number of growing chains corresponding to the amount of initiator, and (3) a dominant role played by ester interchange reactions.