Thermodynamics of Pb2+ and Ni2+ adsorption onto natural bentonite from aqueous solutions

Removal of Pb2+ and Ni2+ from aqueous solutions by sorption onto natural bentonite was investigated. Experiments were carried out as a function of particle size, the amount of bentonite, pH, concentration of metals, contact time, and temperature. The adsorption patterns of metal ions onto followed the Langmuir, Freundlich, and Dubinin-Radushkevich isotherms. This included adsorption isotherms of single-metal solutions at 303 K by batch experiments. The thermodynamic parameters (DeltaH,DeltaS,DeltaG) for Pb2+ and Ni2+ sorption onto bentonite were also determined from the temperature dependence. The adsorptions were endothermic reactions. The results suggested that natural bentonite is suitable as a sorbent material for recovery and adsorption of metal ions from aqueous solutions.     

Enrichment of Pb(II) ions using phthalic acid functionalized XAD-16 resin as a sorbent

A simple and reliable method has been developed using polymeric material containing phthalic acid as a chelating agent to concentrate ultratrace amounts of lead ions in aqueous solutions. After characterization by CHN, IR, and thermal studies, the static and dynamic sorption behavior of Pb(II) ions onto new synthetic resin has been investigated. The sorption has been optimized with respect to pH, shaking speed, and contact time between the two phases. Maximum sorption is achieved from solution of pH 5-8 after 10 min agitation time. The lowest concentration for quantitative recovery is 5.8 ng cm(-3) with a preconcentration factor of approximately 850. The kinetics of sorption follows the first-order rate equation with the rate constant k=0.58+/-0.04 min(-1). The variation of the equilibrium constant K(c) with temperature between 10 and 50 degrees C yields values of DeltaH, 52.4+/-1.65 kJmol(-1), DeltaS, 186+/-5.21 Jmol(-1)K(-1), and DeltaG(303K), -4.15+/-0.002 kJmol(-1). The sorption data of Pb(II) ions in the concentration range from 2.41x10(-6) to 1.44x10(-4) molL(-1) follows the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherms at all temperatures investigated. The sorption of Pb(II) ions onto synthesized resin in the presence of common anions and cations has also been measured. The possible sorption mechanism of Pb(II) ions onto phthalic acid modified XAD-16 is also discussed. The sorption procedure is utilized to preconcentrate Pb(II) ions prior to their determination in automobile exhaust particulates by atomic absorption spectrometry using direct and standard addition methods.     

Adsorption and thermodynamic characteristics of Hg(II)-SCN complex onto polyurethane foam

The sorption of Hg(II) in the presence of sodium thiocyanate solution onto polyurethane (PUR) foam, an excellent sorbent, has been investigated in detail. Maximum sorption of Hg(II) is achieved from 0.1 M hydrochloric acid solution containing 7.5x10(-2) M sodium thiocyanate in 5 min. The sorption data followed both Freundlich and Langmuir adsorption isotherms. The Freundlich constants 1/n and sorption capacity, C(m), are evaluated to be 0.44+/-0.02 and (3.86+/-0.89)x10(-3) mol g(-1). The saturation capacity and adsorption constant derived from Langmuir isotherm are (6.88+/-0.28)x10(-5) mol g(-1) and (5.6+/-0.37)x10(4) dm(3) mol(-1) respectively. The mean free energy (E) of Hg(II)-SCN sorption onto PUR foam computed from D-R isotherm is 12.4+/-0.3 kJ mol(-1) indicating ion-exchange type mechanism of chemisorption. The variation of sorption with temperature yields thermodynamic parameters of DeltaH=-30.7+/-1.2 kJ mol(-1), DeltaS=-70.1+/-4.1 J mol(-1) K(-1) and DeltaG=-9.86+/-0.77 kJ mol(-1) at 298 K. The negative value of enthalpy and free energy reflects the exothermic and spontaneous nature of sorption. On the basis of the sorption data, sorption mechanism has been proposed.     

Sorption of traces of silver ions onto polyurethane foam from acidic solution

The sorption of traces of silver ions onto polyurethane foam (PUF) has been investigated in detail. Maximum sorption of silver (K(d)=6109 cm(3) g(-1), %sorption>97.5%) has been achieved from 1 M nitric acid solution after equilibrating silver ions with approximately 29 mg PUF for 20 min. The kinetics and thermodynamics of the sorption of silver ions onto PUF have also been studied. The sorption of silver ions onto PUF follows a first-order rate equation, which results as 0.177 min(-1). The variation of sorption with temperature yields the values of DeltaH=-56.1+/-3.2 kJ mol(-1), DeltaS=-159.7+/-10.5 J mol(-1) K(-1) and DeltaG=-8.68+/-0.09 kJ mol(-1) at 298 K with a correlation factor gamma=0.9919. The sorption data were subjected to different sorption isotherms. The sorption follows Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherms. The values of Langmuir isotherms Q=65.4+/-1.5 mumol g(-1) and b=(4.79+/-1.16)x10(4) dm(3) mol(-1) have been evaluated for Langmuir sorption constants, whereas the Freundlich sorption isotherm gives the value 1/n=0.12+/-0.02 and A=0.15+/-0.03 mmol g(-1). The D-R parameters computed were beta=-0.000817+/-0.000206 mol(2) kJ(-2), X(m)=76.8+/-8.7 mumol g(-1) and E=24.7+/-3.2 kJ mol(-1). The influence of common ions on the sorption was also examined. It is observed that Hg(II), thiourea, Al(III), thiocyanate and thiosulphate reduce the sorption, whereas Cu(II), citrate and acetate ions enhance the sorption significantly. It can be concluded that PUF may be used to remove traces of silver ions from its very dilute solutions or for its preconcentration from aqueous acidic solutions.     

Preparation and properties of silica gel with immobilized formazan group

A new sorption material, silica gel with covalently immobilized formazan group, was suggested and characterized. The material was prepared by coupling the immobilized aryldiazonium salt with benzaldehyde phenylhydrazone. The equilibrium and kinetic characteristics of the sorption of Cu(II), Co(II), Ni(II), and Cd(II) from solutions onto the modified silica gel were determined. The material proved to efficiently concentrate Cu(II) from multicomponent solutions. The coordination surrounding of Cu(II) in the complex on the sorbent surface was determined by ESR.     

Kinetics and thermodynamics of sorption of nitroaromatic compounds to as-grown and oxidized multiwalled carbon nanotubes

The sorption kinetics and thermodynamics of 1,3-dinitrobenzene (DNB), m-nitrotoluene (mNT), p-nitrophenol (pNP), and nitrobenzene (NB) on as-grown and nitric acid-oxidized multiwalled carbon nanotubes (MWCNTs) were investigated. The sorption kinetics was well described by a pseudo-second-order rate model, while both Langmuir and Freundlich models described the sorption isotherms well and the sorption thermodynamic parameters of equilibrium constant (K(0)), standard free energy (DeltaG), standard enthalpy (DeltaH), and standard entropy changes (DeltaS) were measured. The values of DeltaH and DeltaG suggested that the sorption of nitroaromatics (NACs) onto MWCNTs was exothermic and spontaneous. The structure, number, and position of nitro groups of NACs were the main factors affecting the sorption rate and capacity. Treatment of the MWCNTs with nitric acid increased both the surface area and the pore volume and introduced oxygen-containing functional groups to the MWCNTs, which depressed the sorption of NACs onto MWCNTs.     

Thermodynamic and kinetic investigations of PO3-4 adsorption on blast furnace slag

The kinetics of adsorption of PO(3-)(4) by blast furnace slag were found to be fast, reaching equilibrium in 20 min and following a pseudo-second-order rate equation. The adsorption behavior of PO(3-)(4) on blast furnace slag has been studied as a function of the solution agitation speed, pH, and temperature. Results have been analyzed by Freundlich, Langmuir, BET, and Dubinin-Radushkevich (D-R) adsorption isotherms. The mean energy of adsorption, 10.31 kJ mol(-1), was calculated from the D-R adsorption isotherm. The rate constants were calculated for 293, 298, 303, and 308 K using a pseudo-second-order rate equation and the activation energy (E(a)) was derived using the Arrhenius equation. Thermodynamic parameters such as DeltaH(0), DeltaS(0), and DeltaG(0) were calculated from the slope and intercept of linear plot of lnK(D) against 1/T. The DeltaH(0) and DeltaG(0) values of PO(3-)(4) adsorption on the blast furnace slag show endothermic heat of adsorption. But there is a negative free energy value, indicating that the process of PO(3-)(4) adsorption is favored at high temperatures.     

Identification of selective ion-exchange resin for fluoride sorption

The defluoridation capacity (DC) of a chelating resin, namely Indion FR 10 (IND), and Ceralite IRA 400 (CER), an anion-exchange resin, were compared under various equilibrating conditions for the identification of selective sorbent. The results showed that chelating resin is more selective than an anion-exchange resin for fluoride removal. The fluoride sorption was reasonably explained using Freundlich and Langmuir isotherms. The surface morphology of resins before and after fluoride sorption was observed using scanning electron microscopy (SEM). Fourier transform infrared spectroscopy (FTIR) was used for the determination of functional groups responsible for fluoride sorption. Various thermodynamic parameters such as DeltaG0, DeltaH0, DeltaS0, and Ea have been calculated to understand the nature of sorption. The sorption kinetic mechanism was studied with reaction-based and diffusion-based models. The sorption process was found to be controlled by pseudo-second-order and particle diffusion models. The performance of the resins studied has been tested with field samples collected from a fluoride-endemic area.     

Adsorption behavior of Hg(II), Pb(II), and Cd(II) from aqueous solution on Duolite C-433: a synthetic resin

The adsorption behavior of Hg(II), Pb(II), and Cd(II) on Duolite C-433 synthetic resin has been determined at different temperatures by batch process. The various thermodynamic parameters, such as equilibrium constant K0, free energy DeltaG0, entropy DeltaS0, and enthalpy DeltaH0, have been calculated in order to predict the nature of sorption.     

Silica gel surface modified with sulfanilamide for selective solid-phase extraction of Cu(II), Zn(II) and Ni(II)

A new chelating matrix has been prepared by immobilising sulfanilamide (SA) on silica gel (SG) surface modified with 3-chloropropyltrimethoxysilane as a sorbent for the solid-phase extraction (SPE) Cu(II), Zn(II) and Ni(II). The determination of metal ions in aqueous solutions was carried out by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective sorption of trace levels of Cu(II), Zn(II) and Ni(II) were optimised with respect to different experimental parameters using the batch and column procedures. The presence of common coexisting ions does not affect the sorption capacities. The maximum sorption capacity of the sorbent at optimum conditions was found to be 34.91, 19.07 and 23.62 mg g^?1 for Cu(II), Zn(II) and Ni(II), respectively. The detection limit of the method defined by IUPAC was found to be 1.60, 0.50 and 0.61 µg L^?1 for Cu(II), Zn(II) and Ni(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 4.0% (n = 8). The method was applied to the recovery of Cu(II), Zn(II) and Ni(II) from the certified reference material (GBW 08301, river sediment) and to the simultaneous determination of these cations in different water samples with satisfactory results.     

Sorption of Cu(II) onto silica gel immobilized calix[4]arene derivative with tripodal structure

This study contains the synthesis of silica gel-immobilized calix[4]arene derivative (TR-CL[4]P) as a new sorbent and its sorption studies towards Cu (II) ion in aqueous solution. The aldehyde pointed calix[4]arene derivative 5 was synthesized and then it was immobilized onto 3-aminopropilsilica gel (APS). In batch sorption experiments, the experimental results showed that TR-CL[4]P is effective sorbent towards Cu (II) ion. Therefore, the effect of solution pH, sorption time, temperature and initial metal ion concentration onto Cu (II) sorption was investigated. Maximum Cu(II) removal was obtained at 30?°C, 30?min and pH 6.0 for TR-CL[4]P and the batch sorption capacity was found as 17.8?mg/g. The characteristics of the sorption process for Cu (II) ion were evaluated by using the Langmuir, Freundlich and Dubinin–Radushkevich (D–R) adsorption isotherms. Also, thermodynamic parameters, i.e., ΔG, ΔS, and ΔH were calculated for the system.     

The sorption of divalent metal ions on AlPO4

The sorption of Cu(2+), Pb(2+), Ni(2+), and Cd(2+) ions on the aluminum(III) phosphate was observed to increase with increases in the concentration, temperature, and pH of the system. The apparent dissociation (pK(a)), binding (pK(b)) and exchange (pK(ex)) constants of aluminum(III) phosphate were evaluated and found to be dependent upon the temperature and nature of the metal cations. The values of the dissociation constants (pK(a)) followed the order Pb(2+)相似文献   

Spectrophotometric and conductometric study of complexation of salophen and some transition metal ions in nonaqueous polar solvents

The complexation reaction between Cu(2+), Co(2+) and Ni(2+) metal cations with N,N'-bis(salicylidene)-1,2-phenylenediamine (salophen), in three nonaqueous polar solvents such as: acetonitrile (AN), dimethyl sulfoxide (DMSO), methanol (MeOH) and two binary mixtures of AN:DMSO and AN:MeOH at 25 degrees C were studied by spectrophotometric and conductometric methods. All investigated metal ions form 1:1 ML complex which their stability constants were determined and increase as Irving-Williams stability order of Co(2+)相似文献   

Sorption of Cobalt on Modified Silica Gel Materials

Various silica gel materials were chemically modified with imidazole, diaza-18-crown-6 (DA18C6) and dibenzod-18-crown-6 (DB18C6). The degree of functionalization of the covalently attached molecule was calculated from C, H, N analysis and ranged between 0.270 and 0.552 mmol/g (for sorbents with imidazole) and between 0.043 and 0.062 mmol/g (for sorbents with DA18C6 and DB18C6). The degree of functionalization depends on the reflux time and silica gel matrix used. Experimental sorption capacity ranged between 0.038 and 0.228 mmol/g (for sorbents with imidazole) and between 0.019 and 0.050 mmol/g (for sorbents with DA18C6 and DB18C6). Synthesized hexagonal mesoporous silica matrix MCM-41 with uniform pore diameter <40 Å was used too. Change of pore diameters of silica gel support to larger pores should have a positive influence on access of cobalt ion to sorption centers to increase of sorption capacity of sorbents. The sorption kinetics of cobalt and the influence of cobalt concentration, pH of various kinds of silica gel matrix with immobilized imidazole group in static conditions on sorption were measured. The sorption of cobalt in various conditions (pH, contact time of phases) with constant liquid-solid ratio (V/m = 50 ml/g) was studied. The distribution coefficients ranged between 200 and 50 000 ml/g (for imidazole), 85 and 120 ml/g (for DB18C6) and between 230 and 500 ml/g (for DA18C6) according to silica gel matrix used and according to the method of sorbent preparation. pH plays important role in the sorption of cobalt on prepared sorbents with immobilized crown ethers due to protonization of crown ethers. Protons significantly competes to sorption of cobalt in acidic solutions. The influence of presence of other heavy or toxic metals (Hg(II), Cd(II), Mn(II), Zn(II), Cu(II), Fe(III), Cr(III), Al(III) and the influence of sodium and potassium on sorption Co(II) from aqueous solutions was investigated. Sorption of cobalt decreases in order Hg > Cu > Cd > Zn, Fe > Mn > Al, Cr. The presence of sodium and potassium ions at concentration 0.05 mol/l significantly influences on the sorption of cobalt with sorbent with immobilized DB18C6 functional group.     

Effect of quaternary ammonium cations on dye sorption to fly ash from aqueous media

The efficacy of the surface modification of fly ash by quarternary ammonium cations in the removal of dyes from aqueous solution is demonstrated. A series of organo-fly ash materials were synthesized by treating fly ash with quarternary ammonium cations such as tetraethylammonium, hexadecyltrimethylammonium, and benzyldimethyltetradecylammonium (TEA, HDTMA, and BDTDA). Two types of dyes were used for the investigation, disperse and anionic dyes. The effects of initial dye concentration, contact time, temperature, and the mechanism of dye sorption were investigated. The sorption was found to be affected by the structure and size of the quaternary ammonium cations as well as that of the dyes. Sorption of dyes was considerably enhanced by the surface modification. Thermodynamic parameters such as free energy (DeltaG0), enthalpy (DeltaH0), and entropy (DeltaS0) for the sorption process were also calculated.     

Formation of nickel, cobalt, manganese and cadmium ferrocyanides

Potentiometric and solubility studies have been made of the ferrocyanides of nickel, cobalt, manganese(II) and cadmium both in the presence and absence of potassium. The K(3p),DeltaG degrees , DeltaH degrees and DeltaS degrees values are reported.     

Spectroscopic, and thermal studies of some new binuclear transition metal(II) complexes with hydrazone ligands containing acetoacetanilide and isoxazole

A new chelating ligand, 2-(2-(5-tert-butylisoxazol-3-yl)hydrazono)-N-(2,4-dimethylphenyl)-3-oxobutanamide (HL), and its four binuclear transition metal complexes, M(2)(L)(2) (micro-OCH(3))(2) [M=Ni(II), Co(II), Cu(II), Zn(II)], were synthesized using the procedure of diazotization, coupling and metallization. Their structures were postulated based on elemental analysis, (1)H NMR, MALDI-MS, FT-IR spectra and UV-vis electronic absorption spectra. Smooth films of these complexes on K9 glass substrates were prepared using the spin-coating method and their absorption properties were evaluated. The thermal properties of the metal(II) complexes were investigated by thermogravimetry (TG) and differential scanning calorimetry (DSC). Different thermodynamic and kinetic parameters namely activation energy (E*), enthalpy of activation (DeltaH*), entropy of activation (DeltaS*) and free energy change of activation (DeltaG*) are calculated using Coats-Redfern (CR) equation.     

The sorption behavior of a nickel-insolubilized humic acid system in a column arrangement

The sorption characteristics of insolubilized humic acid (IHA) were investigated for Ni (II) in a column arrangement. The sodium form of the IHA (INaA) was used as a solid phase. Column operations were performed with five steps and all of them were monitored continuously by a flowthrough cell-adapted UV-Vis spectrophotometer. Thus, all solid-phase extraction (SPE) steps were visualized by breakthrough curves and analyses progress were evaluated. However, all calculations and evaluations were focused on the atomic absorption spectrophotometric (AAS) analyses of the solutions collected during the stripping steps. There was a high correlation (r(2), 0.972) between peak area and AAS data of stripping steps. The effect of concentration and pH of the loading solution onto sorption of Ni (II) by INaA was investigated. Sorption characteristics were evaluated by using Freundlich, Langmuir, and Dubinin-Radushkevich (D-R) adsorption isotherms, as well as by Scatchard plot analysis. Multilayer sorption was found to be agreeable for Ni (II). From the D-R isotherm the mean free energy of sorption (E) was calculated (6.65 kJ mol(-1)) and attributed to the multilayer sorption. Finally, the sorption characteristic of the INaA-Ni (II) system was compared with that of the INaA-Cu (II) system, and possible separation of two ions in a binary mixture system is discussed.     

Adsorption studies of cerium on lead dioxide from aqueous solutions

The adsorption of cerium from aqueous solutions on lead dioxide has been investigated and optimized as a function of pH, equilibration time, sorbate and sorbent concentrations. The effect of other anions and cations on its adsorption has also been studied. Citrate, EDTA, tartrate, oxalate, U(VI), Th(IV), Pb(II), Cr(III) and Al(III) drastically reduce the adsorption. Adsorption of other metal ions on the same oxide has been measured under identical conditions. The distribution coefficient indicates that cerium can be separated from Fe(III), Tc(VII), In(III), Ag(I), Hg(II) and Ta(V). The data fitted very well to Freundlich as well as Dubinin-Raduskevich (D-R) isotherms. A mean free energy of sorption 11.62±0.2 kJ·mol^–1 was calculated, using the D-R equation and corresponds to an ion exchange reaction.     

Synthesis, characterization and structure effects on selectivity properties of silica gel covalently bonded diethylenetriamine mono- and bis-salicyaldehyde and naphthaldehyde Schiff(,)s bases towards some heavy metal ions

Four silica gel-immobilized new metal chelate Schiff(,)s bases were synthesized (I-IV). Silica gel chemically bonded diethylenetriamine mono-naphthaldehyde and mono-salicyaldehyde Schiff's bases (phases I and III) were produced via the interaction of silica gel-modified diethylenetriamine with naphthaldehyde and salicylaldehyde, respectively. However, phases II and IV arose through the interaction of bis-naphthaldehyde and bis-salicylaldehyde Schiff(,)s bases of diethylenetriamine with 3-chloropropyltrimethoxysilane modified silica gel. The characterization of such new phases, their capabilities towards selective extraction or separation of Fe(III), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) ions were studied and evaluated by both batch and column techniques as a function of pH and time of contact. Phases III and I showed high performance towards Cu(II) extraction, where their Cu(II) sorption determined to be 0.957 and 0.940 mmol g(-1), respectively. However, for phases IV and II, the great affinity was devoted to Fe(III) extraction followed by Cu(II) ions. The reactivity of metal ion sorption was discussed in the light of effects of bulkiness as well as orientation of immobilized chelate on sorbent reactivity. Donor sites of phases III and I (diethylenetriamine and azomethene nitrogens along with phenolic hydroxyl group oxygen) are fully active, whereas phases IV and II are partially active with only participation of oxygen and azomethene nitrogen. The order of increasing thermal stability (IV相似文献