QM/MM study of mechanisms for compound I formation in the catalytic cycle of cytochrome P450cam

In the catalytic cycle of cytochrome P450cam, after molecular oxygen binds as a ligand to the heme iron atom to yield a ferrous dioxygen complex, there are fast proton transfers that lead to the formation of the active species, Compound I (Cpd I), which are not well understood because they occur so rapidly. In the present work, the conversion of the ferric hydroperoxo complex (Cpd 0) to Cpd I has been investigated by combined quantum-mechanical/molecular-mechanical (QM/MM) calculations. The residues Asp(251) and Glu(366) are considered as proton sources. In mechanism I, a proton is transported to the distal oxygen atom of the hydroperoxo group via a hydrogen bonding network to form protonated Cpd 0 (prot-Cpd0: FeOOH(2)), followed by heterolytic O-O bond cleavage that generates Cpd I and water. Although a local minimum is found for prot-Cpd0 in the Glu(366) channel, it is very high in energy (more than 20 kcal/mol above Cpd 0) and the barriers for its decay are only 3-4 kcal/mol (both toward Cpd 0 and Cpd I). In mechanism II, an initial O-O bond cleavage followed by a concomitant proton and electron transfer yields Cpd I and water. The rate-limiting step in mechanism II is O-O cleavage with a barrier of about 13-14 kcal/mol. According to the QM/MM calculations, the favored low-energy pathway to Cpd I is provided by mechanism II in the Asp(251) channel. Cpd 0 and Cpd I are of similar energies, with a slight preference for Cpd I.     

Quantum mechanical/molecular mechanical study on the mechanisms of compound I formation in the catalytic cycle of chloroperoxidase: an overview on heme enzymes

The formation of Compound I (Cpd I), the active species of the enzyme chloroperoxidase (CPO), was studied using QM/MM calculation. Starting from the substrate complex with hydrogen peroxide, FeIII-HOOH, we examined two alternative mechanisms on the three lowest spin-state surfaces. The calculations showed that the preferred pathway involves heterolytic O-O cleavage that proceeds via the iron hydroperoxide species, i.e., Compound 0 (Cpd 0), on the doublet-state surface. This process is effectively concerted, with a barrier of 12.4 kcal/mol, and is catalyzed by protonation of the distal OH group of Cpd 0. By comparison, the path that involves a direct O-O cleavage from FeIII-HOOH is less favored. A proton coupled electron transfer (PCET) feature was found to play an important role in the mechanism nascent from Cpd 0. Initially, the O-O cleavage progresses in a homolytic sense, but as soon as the proton is transferred to the distal OH, it triggers an electron transfer from the heme-oxo moiety to form water and Cpd I. This study enables us to generalize the mechanisms of O-O activation, elucidated so far by QM/MM calculations, for other heme enzymes, e.g., cytochrome P450cam, horseradish peroxidase (HRP), nitric oxide synthase (NOS), and heme oxygenase (HO). Much like for CPO, in the cases of P450 and HRP, the PCET lowers the barrier below the purely homolytic cleavage alternative (in our case, the homolytic mechanism is calculated directly from FeIII-HOOH). By contrast, the absence of PCET in HO, along with the robust water cluster, prefers a homolytic cleavage mechanism.     

Proton-shuffle mechanism of O-O activation for formation of a high-valent oxo-iron species of bleomycin

Bleomycins (BLMs) can utilize H2O2 to cleave DNA in the presence of ferric ions. DFT calculations were used to study the mechanism of O-O bond cleavage in the low-spin FeIII-hydroperoxo complex of BLM. The following alternative hypotheses were investigated using realistic structural models: (a) heterolytic cleavage of the O-O bond, generating a Compound I (Cpd I) like intermediate, formally BLM-FeV=O; (b) homolytic O-O cleavage, leading to a BLM-FeIV=O species and an OH* radical; and (c) a direct O-O cleavage/H-abstraction mechanism by ABLM. The calculations showed that (a) is a facile and viable mechanism; it involves acid-base proton reshuffle mediated by the side-chain linkers of BLM, causing thereby heterolytic cleavage of the O-O bond and generation of Cpd I. Formation of Cpd I is found to involve a barrier of 13.3 kcal/mol, which is lower than the barriers in the alternative mechanisms (b and c) that possess respective barriers of 31 and 17 kcal/mol. The so-formed Cpd I species with a radical on the side-chain linker, methylvalerate (V), adjacent to the BLM-FeIV=O complex, resembles the formation of the active species of cytochrome c peroxidase in the Poulos-Kraut proton-shuffle mechanism in heme peroxidases (Poulos, T. L.; Kraut, J. J. Biol. Chem. 1980, 255, 8199-8205). Experimental data are discussed and shown to be in accord with this proposal. It suggests that the high-valence Cpd I species of BLM participates in the DNA cleavage. This is an alternative mechanistic hypothesis to the exclusive reactivity scenario based on ABLM (FeIII-OOH).     

Compound I of nitric oxide synthase: the active site protonation state

A quantum mechanical/molecular mechanical (QM/MM) study of the formation of the elusive active species Compound I (Cpd I) of nitric oxide synthase (NOS) from the oxyferrous intermediate shows that two protons have to be provided to produce a reaction that is reasonably exothermic and that leads to the appearance of a radical on the tetrahydrobiopterin cofactor. Molecular dynamics and energy considerations show that a possible source of proton is the water H-bond chain formed from the surface to the active site, but that a water molecule by itself cannot be the source of the proton; an H3O+ species that is propagated along the chain is more likely. The QM/MM calculations demonstrate that Cpd I and H2O are formed from the ferric-hydrogen peroxide complex in a unique heterolytic O-O cleavage mechanism. The properties of the so-formed Cpd I are compared with those of the known species of chloroperoxidase, and the geometry and spin densities are found to be compatible. The M?ssbauer parameters are calculated and may serve as experimental probes in attempts to characterize NOS Cpd I.     

Gauging the relative oxidative powers of compound I, ferric-hydroperoxide, and the ferric-hydrogen peroxide species of cytochrome P450 toward C-H hydroxylation of a radical clock substrate

Density functional calculations were performed in response to the controversies regarding the identity of the oxidant species in cytochrome P450. The calculations were used to gauge the relative C-H hydroxylation reactivity of three potential oxidant species of the enzyme, the high-valent oxo-iron species Compound I (Cpd I), the ferric hydroperoxide Compound 0 (Cpd 0), and the ferric-hydrogen peroxide complex Fe(H(2)O(2)). The results for the hydroxylation of a radical probe substrate, 1, show the following trends: (a) Cpd I is the most reactive species; in its presence the other two reagents will be silent. (b) In the absence of Cpd I, substrate oxidation by Cpd 0 and Fe(H(2)O(2)) will take place via a stepwise mechanism that involves initial O-O homolysis followed by H-abstraction from 1. (c) Cpd 0 will undergo mostly porphyrin hydroxylation and only approximately 15% of substrate oxidation producing mostly the rearranged alcohol, 3 (Scheme 2). (d) Fe(H(2)O(2)) will generate mostly free hydrogen peroxide (uncoupling). A small fraction will perform substrate oxidation and lead mostly to 3. Reactivity probes for these reagents are kinetic isotope effect (KIE) and the product ratio of unrearranged to rearranged alcohols, [2/3]. Thus, for substrate oxidation by Cpd 0 or Fe(H(2)O(2)) KIE will be small, approximately 2, while Cpd I will have large KIE values. Typically both Cpd 0 and Fe(H(2)O(2)) will lead to a [2/3] ratio < 1, while Cpd I will lead to ratios > 1. In addition, the product isotope effect (KIE(2)/KIE(3) not equal 1) is expected from the reactivity of Cpd I.     

Electronic state of the molecular oxygen released by catalase

In catalases, the high redox intermediate known as compound I (Cpd I) is reduced back to the resting state by means of hydrogen peroxide in a 2-electron reaction [Cpd I (Por(*+)-Fe(IV)O) + H(2)O(2) --> Enz (Por-Fe(III)) + H(2)O + O(2)]. It has been proposed that this reaction takes place via proton transfer toward the distal His and hydride transfer toward the oxoferryl oxygen (H(+)/H(-) scheme) and some authors have related it to singlet oxygen generation. Here, we consider the possible reaction schemes and qualitatively analyze the electronic state of the species involved to show that the commonly used association of the H(+)/H(-) scheme with singlet oxygen production is not justified. The analysis is complemented with density functional theory (DFT) calculations for a gas-phase active site model of the reactants and products.     

What is the active species of cytochrome P450 during camphor hydroxylation? QM/MM studies of different electronic states of compound I and of reduced and oxidized iron-oxo intermediates

We have investigated C-H hydroxylation of camphor by Compound I (Cpd I) of cytochrome P450cam in different electronic states and by its one-electron reduced and oxidized forms, using QM/MM calculations in the native protein/solvent environment. Cpd I species with five unpaired electrons (pentaradicaloids) are ca. 12 kcal/mol higher in energy than the ground state Cpd I species with three unpaired electrons (triradicaloids). The H-abstraction transition states of pentaradicaloids lie ca. 21 (9) kcal/mol above the triradicaloid (pentaradicaloid) reactants. Hydroxylation via pentaradicaloids is thus facile provided that they can react before relaxing to the ground-state triradicaloids. Excited states of Cpd I with an Fe(V)-oxo moiety lie more than 20 kcal/mol above the triradicaloid ground state in single-point gas-phase calculations, but these electronic configurations are not stable upon including the point-charge protein environment which causes SCF convergence to the triradicaloid ground state. One-electron reduced species (Cpd II) show sluggish reactivity compared with Cpd I in agreement with experimental model studies. One-electron oxidized species are more reactive than Cpd I but seem too high in energy to be accessible. The barriers to hydrogen abstraction for the various forms of Cpd I are generally not affected much by the chosen protonation states of the Asp297 and His355 residues near the propionate side chains of the heme or by the appearance of radical character at Asp297, His355, or the propionates.     

Proton-directed redox control of O-O bond activation by heme hydroperoxidase models

Hangman metalloporphyrin complexes poise an acid-base group over a redox-active metal center and in doing so allow the "pull" effect of the secondary coordination environment of the heme cofactor of hydroperoxidase enzymes to be modeled. Stopped-flow investigations have been performed to decipher the influence of a proton-donor group on O-O bond activation. Low-temperature reactions of tetramesitylporphyrin (TMP) and Hangman iron complexes containing acid (HPX-CO2H) and methyl ester (HPX-CO2Me) functional groups with peroxyacids generate high-valent Fe=O active sites. Reactions of peroxyacids with (TMP)FeIII(OH) and methyl ester Hangman (HPX-CO2Me)FeIII(OH) give both O-O heterolysis and homolysis products, Compound I (Cpd I) and Compound II (Cpd II), respectively. However, only the former is observed when the hanging group is the acid, (HPX-CO2H)FeIII(OH), because odd-electron homolytic O-O bond cleavage is inhibited. This proton-controlled, 2e- (heterolysis) vs 1e- (homolysis) redox specificity sheds light on the exceptional catalytic performance of the Hangman metalloporphyrin complexes and provides tangible benchmarks for using proton-coupled multielectron reactions to catalyze O-O bond-breaking and bond-making reactions.     

Proton assisted oxygen-oxygen bond splitting in cytochrome p450

Proton assisted O-O bond splitting of cytochromes' P450 hydroperoxo Compound 0 has been investigated by density functional theory, showing a barrier for the slightly endothermic formation of the iron-oxo Compound I. The barrier and the endothermicity increase with decreasing acidity of the distal proton source. Protonation of the proximal iron heme ligand favors the O-O bond scission and provides an important regulatory component in the catalytic cycle. The Compound 0 --> I conversion is slightly exothermic for the peroxidase and catalase models. Implications of the energetic relationship between the two reactive intermediates are discussed in terms of possible oxidative pathways.     

Probing the oxyferrous and catalytically active ferryl states of Amphitrite ornata dehaloperoxidase by cryoreduction and EPR/ENDOR spectroscopy. Detection of compound I

Dehaloperoxidase (DHP) from Amphitrite ornata is a heme protein that can function both as a hemoglobin and as a peroxidase. This report describes the use of 77 K cryoreduction EPR/ENDOR techniques to study both functions of DHP. Cryoreduced oxyferrous [Fe(II)-O(2)] DHP exhibits two EPR signals characteristic of a peroxoferric [Fe(III)-O(2)(2-)] heme species, reflecting the presence of conformational substates in the oxyferrous precursor. (1)H ENDOR spectroscopy of the cryogenerated substates shows that H-bonding interactions between His N(ε)H and heme-bound O(2) in these conformers are similar to those in the β-chain of oxyferrous hemoglobin A (HbA) and oxyferrous myoglobin, respectively. Decay of cryogenerated peroxoferric heme DHP intermediates upon annealing at temperatures above 180 K is accompanied by the appearance of a new paramagnetic species with an axial EPR signal with g(⊥) = 3.75 and g(∥) = 1.96, characteristic of an S = 3/2 spin state. This species is assigned to Compound I (Cpd I), in which a porphyrin π-cation radical is ferromagnetically coupled with an S = 1 ferryl [Fe(IV)═O] ion. This species was also trapped by rapid freeze-quench of the ambient-temperature reaction mixture of ferric [Fe(III)] DHP and H(2)O(2). However, in the latter case Cpd I is reduced very rapidly by a nearby tyrosine to form Cpd ES [(Fe(IV)═O)(porphyrin)/Tyr(?)]. Addition of the substrate analogue 2,4,6-trifluorophenol (F(3)PhOH) suppresses formation of the Cpd I intermediate during annealing of cryoreduced oxyferrous DHP at 190 K but has no effect on the spectroscopic properties of the remaining cryoreduced oxyferrous DHP intermediates and kinetics of their decay. These observations indicate that substrate (i) binds to oxyferrous DHP outside of the distal pocket and (ii) can reduce Cpd I to Cpd II [Fe(IV)═O]. These assumptions are also supported by the observation that F(3)PhOH has only a small effect on the EPR properties of radiolytically cryooxidized and cryoreduced ferrous [Fe(II)] DHP. EPR spectra of cryoreduced ferrous DHP disclose the multiconformational nature of the ferrous DHP precursor. The observation and characterization of Cpds I, II, and ES in the absence and in the presence of F(3)PhOH provides definitive evidence of a mechanism involving consecutive one-electron steps and clarifies the role of all intermediates formed during turnover.     

New features in the catalytic cycle of cytochrome P450 during the formation of compound I from compound 0

Density functional theory (DFT) is applied to the dark section of the catalytic cycle of the enzyme cytochrome P450, namely, the formation of the active species, Compound I (Cpd I), from the ferric-hydroperoxide species (Cpd 0) by a protonation-assisted mechanism. The chosen 96-atom model includes the key functionalities deduced from experiment: Asp(251), Thr(252), Glu(366), and the water channels that relay the protons. The DFT model calculations show that (a) Cpd I is not formed spontaneously from Cpd 0 by direct protonation, nor is the process very exothermic. The process is virtually thermoneutral and involves a significant barrier such that formation of Cpd I is not facile on this route. (b) Along the protonation pathway, there exists an intermediate, a protonated Cpd 0, which is a potent oxidant since it is a ferric complex of water oxide. Preliminary quantum mechanical/molecular mechanical calculations confirm that Cpd 0 and Cpd I are of similar energy for the chosen model and that protonated Cpd 0 may exist as an unstable intermediate. The paper also addresses the essential role of Thr(252) as a hydrogen-bond acceptor (in accord with mutation studies of the OH group to OMe).     

Mechanism of reaction of hydrogen peroxide with horseradish peroxidase: identification of intermediates in the catalytic cycle.

The mechanism of the reaction of horseradish peroxidase isoenzyme C (HRPC) with hydrogen peroxide to form the reactive enzyme intermediate compound I has been studied using electronic absorbance, rapid-scan stopped-flow, and electron paramagnetic resonance (EPR) spectroscopies at both acid and basic pH. The roles of the active site residues His42 and Arg38 in controlling heterolytic cleavage of the H(2)O(2) oxygen-oxygen bond have been probed with site-directed mutant enzymes His42 --> Leu (H42L), Arg38 --> Leu (R38L), and Arg38 --> Gly (R38G). The biphasic reaction kinetics of H42L with H(2)O(2) suggested the presence of an intermediate species and, at acid pH, a reversible second step, probably due to a neutral enzyme-H(2)O(2) complex and the ferric-peroxoanion-containing compound 0. EPR also indicated the formation of a protein radical situated more than approximately 10 A from the heme iron. The stoichiometry of the reaction of the H42L/H(2)O(2) reaction product and 2,2'-azinobis(3-ethylbenzothiazolinesulfonic acid) (ABTS) was concentration dependent and fell from a value of 2 to 1 above 0.7 mM ABTS. These data can be explained if H(2)O(2) undergoes homolytic cleavage in H42L. The apparent rate of compound I formation by H42L, while low, was pH independent in contrast to wild-type HRPC where the rate falls at acid pH, indicating the involvement of an ionizable group with pK(a) approximately 4. In R38L and R38G, the apparent pK(a) was shifted to approximately 8 but there is no evidence that homolytic cleavage of H(2)O(2) occurs. These data suggest that His42 acts initially as a proton acceptor (base catalyst) and then as a donor (acid catalyst) at neutral pH and predict the observed slower rate and lower efficiency of heterolytic cleavage observed at acid pH. Arg38 is influential in lowering the pK(a) of His42 and additionally in aligning H(2)O(2) in the active site, but it does not play a direct role in proton transfer.     

Theoretical modeling of enzyme reactions: the thermodynamics of formation of compound 0 in horseradish peroxidase

In this paper, by using the perturbed matrix method (PMM) in combination with basic statistical mechanical relations both based on nanosecond time-scale molecular dynamics (MD) simulations, we quantitatively address the thermodynamics of compound 0 (Cpd 0) formation in horseradish peroxidase (HRP) enzyme. Our results, in the same trend of low-temperature experimental data, obtained in cryoenzymology studies indicate that such a reaction can be described essentially as a stepwise spontaneous process: a first step mechanically constrained, strongly exothermic proton transfer from the heme-H2O2 complex to the conserved His42, followed by a solvent-protein relaxation involving a large entropy increase. Critical evaluation of PMM/MD data also reveals the crucial role played by specific residues in the reaction pocket and, more in general, by the conformational fluctuations of the overall environment in physiological conditions.     

1H NMR study of the magnetic properties and electronic structure of the hydroxide complex of substrate-bound heme oxygenase from Neisseria meningitidis: influence of the axial water deprotonation on the distal H-bond network

The substrate and active site residues of the low-spin hydroxide complex of the protohemin complex of Neisseria meningitidis heme oxygenase (NmHO) have been assigned by saturation transfer between the hydroxide and previously characterized aquo complex. The available dipolar shifts allowed the quantitation of both the orientation and anisotropy of the paramagnetic susceptibility tensor. The resulting positive sign, and reduced magnitude of the axial anisotropy relative to the cyanide complex, dictate that the orbital ground state is the conventional "d(pi)" (d(2)(xy)(d(xz), d(yz))(3)); and not the unusual "d(xy)" (d(2)(xz)d(2)(yz)d(xy)) orbital ground state reported for the hydroxide complex of the homologous heme oxygenase (HO) from Pseudomonas aeruginosa (Caignan, G.; Deshmukh, R.; Zeng, Y.; Wilks, A.; Bunce, R. A.; Rivera, M. J. Am. Chem. Soc. 2003, 125, 11842-11852) and proposed as a signature of the HO distal cavity. The conservation of slow labile proton exchange with solvent from pH 7.0 to 10.8 confirms the extraordinary dynamic stability of NmHO complexes. Comparison of the diamagnetic contribution to the labile proton chemical shifts in the aquo and hydroxide complexes reveals strongly conserved bond strengths in the distal H-bond network, with the exception of the distal His53 N(epsilon)(1)H. The iron-ligated water is linked to His53 primarily by a pair of nonligated, ordered water molecules that transmit the conversion of the ligated H-bond donor (H(2)O) to a H-bond acceptor (OH(-)), thereby increasing the H-bond donor strength of the His53 side chain.     

Theoretical study of N-demethylation of substituted N,N-dimethylanilines by cytochrome P450: the mechanistic significance of kinetic isotope effect profiles

The mechanism of N-demethylation of N,N-dimethylanilines (DMAs) by cytochrome P450, a highly debated topic in mechanistic bioinorganic chemistry (Karki, S. B.; Dinnocenczo, J. P.; Jones, J. P.; Korzekwa, K. R. J. Am. Chem. Soc. 1995, 117, 3657), is studied here using DFT calculations of the reactions of the active species of the enzyme, Compound I (Cpd I), with four para-(H, Cl, CN, NO2) substituted DMAs. The calculations resolve mechanistic controversies, offer a consistent mechanistic view, and reveal the following features: (a) the reaction pathways involve C-H hydroxylation by Cpd I followed by a nonenzymatic carbinolamine decomposition. (b) C-H hydroxylation is initiated by a hydrogen atom transfer (HAT) step that possesses a "polar" character. As such, the HAT energy barriers correlate with the energy level of the HOMO of the DMAs. (c) The series exhibits a switch from spin-selective reactivity for DMA and p-Cl-DMA to two-state reactivity, with low- and high-spin states, for p-CN-DMA and p-NO2-DMA. (d) The computed kinetic isotope effect profiles (KIEPs) for these scenarios match the experimentally determined KIEPs. Theory further shows that the KIEs and TS structures vary in a manner predicted by the Melander-Westheimer postulate: as the substituent becomes more electron withdrawing, the TS is shifted to a later position along the H-transfer coordinate and the corresponding KIEs increases. (e) The generated carbinolaniline can readily dissociate from the heme and decomposes in a nonenzymatic environment, which involves water assisted proton shift.     

An efficient proton-coupled electron-transfer process during oxidation of ferulic acid by horseradish peroxidase: coming full cycle

Quantum mechanics/molecular mechanics calculations were utilized to study the process of oxidation of a native substrate (ferulic acid) by the active species of horseradish peroxidase (Dunford, H. B. Heme Peroxidases; Wiley-VCH: New York, 1999), Compound I and Compound II, and the manner by which the enzyme returns to its resting state. The results match experimental findings and reveal additional novel features. The calculations demonstrate that both oxidation processes are initiated by a proton-coupled electron-transfer (PCET) step, in which the active species of the enzyme participate only as electron-transfer partners, while the entire proton-transfer event is being relayed from the substrate to and from the His42 residue by a water molecule (W402). The reason for the observed (Henriksen, A; Smith, A. T.; Gajhede, M. J. Biol. Chem. 1999, 274, 35005-35011) similar reactivities of Compound I and Compound II toward ferulic acid is that the reactive isomer of Compound II is the, hitherto unobserved, Por(*)(+)Fe(III)OH isomer that resembles Compound I. The PCET mechanism reveals that His42 and W402 are crucial moieties and they determine the function of the HRP enzyme and account for its ability to perform substrate oxidation (Poulos, T. L. Peroxidases and Cytochrome P450. In The Porphyrin Handbook; Kadish, K. M., Smith, K. M., Guilard, R., Eds.; Academic Press: New York, 2000; Vol. 4, pp 189). In view of the results, the possibility of manipulating substrate oxidation by magnetic fields is an intriguing possibility.     

DFT Calculations Suggest a New Type of Self-Protection and Self-Inhibition Mechanism in the Mammalian Heme Enzyme Myeloperoxidase: Nucleophilic Addition of a Functional Water rather than One-Electron Reduction

The mammalian heme enzyme myeloperoxidase (MPO) catalyzes the reaction of Cl(-) to the antimicrobial-effective molecule HOCl. During the catalytic cycle, a reactive intermediate "Compound?I" (Cpd?I) is generated. Cpd?I has the ability to destroy the enzyme. Indeed, in the absence of any substrate, Cpd?I decays with a half-life of 100?ms to an intermediate called Compound?II (Cpd?II), which is typically the one-electron reduced Cpd?I. However, the nature of Cpd?II, its spectroscopic properties, and the source of the additional electron are only poorly understood. On the basis of DFT and time-dependent (TD)-DFT quantum chemical calculations at the PBE0/6-31G* level, we propose an extended mechanism involving a new intermediate, which allows MPO to protect itself from self-oxidation or self-destruction during the catalytic cycle. Because of its similarity in electronic structure to Cpd?II, we named this intermediate Cpd?II'. However, the suggested mechanism and our proposed functional structure of Cpd?II' are based on the hypothesis that the heme is reduced by charge separation caused by reaction with a water molecule, and not, as is normally assumed, by the transfer of an electron. In the course of this investigation, we found a second intermediate, the reduced enzyme, towards which the new mechanism is equally transferable. In analogy to Cpd?II', we named it Fe(II') . The proposed new intermediates Cpd?II' and Fe(II') allow the experimental findings, which have been well documented in the literature for decades but not so far understood, to be explained for the first time. These encompass a)?the spontaneous decay of Cpd?I, b)?the unusual (chlorin-like) UV/Vis, circular dichroism (CD), and resonance Raman spectra, c)?the inability of reduced MPO to bind CO, d)?the fact that MPO-Cpd?II reduces SCN(-) but not Cl(-) , and e)?the experimentally observed auto-oxidation/auto-reduction features of the enzyme. Our new mechanism is also transferable to cytochromes, and could well be viable for heme enzymes in general.     

On the functional role of a water molecule in clade 3 catalases: a proposal for the mechanism by which NADPH prevents the formation of compound II

X-ray structures of the 13 different monofunctional heme catalases published to date were scrutinized in order to gain insight in the mechanism by which NADPH in Clade 3 catalases may protect the reactive ferryloxo intermediate Compound I (Cpd I; por (*+)Fe (IV)O) against deactivation to the catalytically inactive intermediate Compound II (Cpd II; porFe (IV)O). Striking similarities in the molecular network of the protein subunits encompassing the heme center and the surface-bound NADPH were found for all of the Clade 3 catalases. Unique features in this region are the presence of a water molecule (W1) adjacent to the 4-vinyl group of heme and a serine residue or a second water molecule hydrogen-bonded to both W1 and the carbonyl group of a threonine-proline linkage, with the proline in van der Waals contact with the dihydronicotinamide group of NADPH. A mechanism is proposed in which a hydroxyl anion released from W1 undergoes reversible nucleophilic addition to the terminal carbon of the 4-vinyl group of Cpd I, thereby producing a neutral porphyrin pi-radical ferryloxo (HO-por (*)Fe (IV)O) species of reduced reactivity. This structure is suggested to be the elusive Cpd II' intermediate proposed in previous studies. An accompanying proton-shifting process along the hydrogen-bonded network is believed to facilitate the NADPH-mediated reduction of Cpd I to ferricatalase and to serve as a funnel for electron transfer from NADPH to the heme center to restore the catalase Fe (III) resting state. The proposed reaction paths were fully supported as chemically reasonable and energetically feasible by means of density functional theory calculations at the (U)B3LYP/6-31G* level. A particularly attractive feature of the present mechanism is that the previously discussed formation of protein-derived radicals is avoided.     

Formation of the active species of cytochrome p450 by using iodosylbenzene: a case for spin-selective reactivity

The generation of the active species for the enzyme cytochrome P450 by using the highly versatile oxygen surrogate iodosylbenzene (PhIO) often produces different results compared with the native route, in which the active species is generated through O(2) uptake and reduction by NADPH. One of these differences that is addressed here is the deuterium kinetic isotope effect (KIE) jump observed during N-dealkylation of N,N-dimethylaniline (DMA) by P450, when the reaction conditions change from the native to the PhIO route. The paper presents a theoretical analysis targeted to elucidate the mechanism of the reaction of PhIO with heme, to form the high-valent iron-oxo species Compound I (Cpd I), and define the origins of the KIE jump in the reaction of Cpd I with DMA. It is concluded that the likely origin of the KIE jump is the spin-selective chemistry of the enzyme cytochrome P450 under different preparation procedures. In the native route, the reaction proceeds via the doublet spin state of Cpd I and leads to a low KIE value. PhIO, however, diverts the reaction to the quartet spin state of Cpd I, which leads to the observed high KIE values. The KIE jump is reproduced here experimentally for the dealkylation of N,N-dimethyl-4-(methylthio)aniline, by using intra-molecular KIE measurements that avoid kinetic complexities. The effect of PhIO is compared with N,N-dimethylaniline-N-oxide (DMAO), which acts both as the oxygen donor and the substrate and leads to the same KIE values as the native route.     

Influence of the distal his in imparting imidazolate character to the proximal his in heme peroxidase: (1)h NMR spectroscopic study of cyanide-inhibited his42-->ala horseradish peroxidase

The functional higher oxidation states of heme peroxidases have been proposed to be stabilized by the significant imidazolate character of the proximal His. This is induced by a "push-pull" combination effect produced by the proximal Asp that abstracts ("pulls") the axial His ring N(delta)H, along with the distal protonated His that contributes ("pushes") a strong hydrogen bond to the distal ligand. The molecular and electronic structure of the distal His mutant of cyanide-inhibited horseradish peroxidase, H42A-HRPCN, has been investigated by NMR. This complex is a valid model for the active site hydrogen-bonding network of HRP compound II. The (1)H and (15)N NMR spectral parameters characterize the relative roles of the distal His42 and proximal Asp247 in imparting imidazolate character to the axial His. 1D/2D spectra reveal a heme pocket molecular structure that is highly conserved in the mutant, except for residues in the immediate proximity of the mutation. This conserved structure, together with the observed dipolar shifts of numerous active site residue protons, allowed a quantitative determination of the orientation and anisotropies of the paramagnetic susceptibility tensor, both of which are only minimally perturbed relative to wild-type HRPCN. The quantitated dipolar shifts allowed the factoring of the hyperfine shifts to reveal that the significant changes in hyperfine shifts for the axial His and ligated (15)N-cyanide result primarily from changes in contact shifts that reflect an approximately one-third reduction in the axial His imidazolate character upon abolishing the distal hydrogen-bond to the ligated cyanide. Significant changes in side chain orientation were found for the distal Arg38, whose terminus reorients to partially fill the void left by the substituted His42 side chain. It is concluded that 1D/2D NMR can quantitate both molecular and electronic structural changes in cyanide-inhibited heme peroxidase and that, while both residues contribute, the proximal Asp247 is more important than the distal His42 in imparting imidazole character to the axial His 170.