Extraction of lead(II) and copper(II) from salicylate media by tributylphosphine oxide.

Tributylphosphine oxide (TBPO) is proposed as an extractant for the extraction of lead(II) and copper(II) from salicylate media. The optimum conditions were evaluated by varying the experimental parameters, such as the pH, sodium salicylate concentration, tributylphosphine oxide (TBPO) concentration, shaking period and various diluents. The probable extracted species, deduced from log-log plots were Pb(HSal)2.2TBPO and Cu(HSal)2.2TBPO. The extraction took place through a solvation mechanism. The method permits the binary separation of lead(II) and copper(II) from commonly associated elements as well as the mutual separation of lead(II) and copper(II). The method is applicable to the determination of lead(II) and copper(II) in various alloys as well as environmental and pharmaceutical samples.     

Novel ruthenium(ii) complexes containing the N-phosphorylated iminophosphorane-phosphine ligand Ph(2)PCH(2)P{[double bond, length as m-dash]NP([double bond, length as m-dash]O)(OEt)(2)}Ph(2): a new coordination mode of its methanide anion

The reactivity of complex [Ru(eta(6)-p-cymene)(kappa(3)P,N,O-Ph(2)PCH(2)P{[double bond, length as m-dash]NP([double bond, length as m-dash]O)(OEt)(2)}Ph(2))][SbF(6)](2) towards a variety of mono- and bidentate neutral ligands has been studied, allowing the high-yield synthesis of the novel half-sandwich Ru(ii) derivatives [Ru(eta(6)-p-cymene)(L)(kappa(2)P,O-Ph(2)PCH(2)P{[double bond, length as m-dash]NP([double bond, length as m-dash]O)(OEt)(2)}Ph(2))][SbF(6)](2) (L = N[triple bond, length as m-dash]CMe , N[triple bond, length as m-dash]CEt , PMe(3), PMe(2)Ph , PMePh(2), PPh(3), P(OMe)(3), P(OEt)(3), P(OPh)(3), py , kappa(1)P-dppm , kappa(1)P-dppe ), as well as the octahedral species [Ru(Ninsertion markN)(2)(kappa(2)P,O-Ph(2)PCH(2)P{[double bond, length as m-dash]NP([double bond, length as m-dash]O)(OEt)(2)}Ph(2))][SbF(6)](2) (Ninsertion markN = bipy , phen ). Deprotonation of complexes ,, upon treatment with an excess of NaOH in CH(2)Cl(2), generates the monocationic derivatives [Ru(Ninsertion markN)(2)(kappa(2)P,N-Ph(2)PC(H)[double bond, length as m-dash]P{NP([double bond, length as m-dash]O)(OEt)(2)}Ph(2))][Cl] (Ninsertion markN = bipy , phen ) in which the methanide anion adopts an unprecedented kappa(2)P,N bidentate coordination mode. The structures of compounds , and have been determined by single-crystal X-ray diffraction methods.     

Combustion synthesis and electrochemical properties of the small hydrofullerene C50H10

The hydrofullerene C(50)H(10) is synthesized by low-pressure benzene-oxygen diffusion combustion. The structure of C(50)H(10) is identified through NMR, mass spectrometry, and IR and Raman spectroscopy as a D(5h) symmetric closed-cage molecule with five pairs of fused pentagons stabilized by ten hydrogen atoms. UV/Vis and fluorescence spectrometric analyses disclose its optical properties as comparable with those of its chloride cousin (C(50)Cl(10)). Cyclic and square-wave voltammograms reveal that the first reduction potential of C(50)H(10) is more negative than that of C(50)Cl(10) as well as C(60), with implications for the utilization of C(50)H(10) as a promising electron acceptor for photovoltaic applications.     

NiN(2)S(2) complexes as metallodithiolate ligands to Rh(I), Rh(II) and Rh(III)

Three molecular structures are reported which utilize the NiN(2)S(2) ligands -, (bis(mercaptoethyl)diazacyclooctane)nickel and -', bis(mercaptoethyl)diazacycloheptane)nickel, as metallodithiolate ligands to rhodium in oxidation states i, ii and iii. For the Rh(I) complex, the NiN(2)S(2) unit behaves as a bidentate ligand to a square planar Rh(I)(CO)(PPh(3))(+) moiety with a hinge or dihedral angle (defined as the intersection of NiN(2)S(2) and S(2)Rh(C)(P) planes) of 115 degrees . Supported by -' ligands, the Rh(II) oxidation state occurs in a dirhodium C(4) paddlewheel complex wherein four NiN(2)S(2) units serve as bidentate bridging ligands to two singly-bonded Rh(II) ions at 2.893(8) A apart. A compilation of the remarkable range of M-M distances in paddlewheel complexes which use NiN(2)S(2) complexes as paddles is presented. The Rh(III) state is found as a tetrametallic [Rh(-')(3)](3+) cluster, roughly shaped like a boat propeller and structurally similar to tris(bipyridine)metal complexes.     

Selective extraction of gallium from aluminum and indium using tripod phenolic ligands

Solvent extraction of trivalent group 13 metal cations such as aluminum, gallium and indium with tripod quadridentate phenolic ligand, tris(2-hydroxy-3,5-dimethylbenzyl)amine (H(3)tdmba), was investigated as fundamental study for their mutual separation. Gallium was extracted almost quantitatively as Ga(tdmba) (logK(ex)=-6.66+/-0.06 on using chloroform as extraction solvent), whereas aluminum and indium were hardly extracted due to steric hindrance on complexation of them with the ligand. The extracted Ga species was estimated as trigonal bipyramidal complex with one H(2)O molecule. Furthermore, extractability of Ga was increased by changing the ligand to more acidic tris(5-chloro-2-hydroxy-3-methylbenzyl)amine (H(3)tcmba) (logK(ex)=-6.18+/-0.18 on using dichloroethane as extraction solvent).     

Synthesis of α-Bromine- Terminated Polystyrene Macroinitiator and Its Initiation of MMA Polymerization by ATRP

In the present paper the synthesis of block copolymers via the transformation from living anionic polymerization (LAP) to atom transfer radical polymerization (ATRP) was described. Α-Bromine-terminated polystyrenes(PStBr) in the LAP step was prepared by using n-BuLi as initiator, tetrahydrofuran (THF) as the activator, α-methylstyrene (α-MeSt) as the capping group and liquid bromine (Br2) as the bromating agent. The effects of reaction conditions such as the amounts of α-MeSt, THF, and Br2 as well as molecular weight of polystyrene on the bromating efficiency (BE) and coupling extent (CE) were examined. The present results show that the yield of PStBr obtained was more than 93.8% and the coupling reaction was substantially absent. PStBr was further used as the macroinitiator in the polymerization of methyl-methacrylate(MMA) in the presence of copper(Ⅰ) halogen and 2,2-bipyridine(bpy) complexes. It was found that the molecular weight of the resulted PSt-b-PMMA increased linearly with the increase of the conversion of MMA and the polydispersity was 1.2-1.6. The structures of PStBr and P(St-b-MMA) were characterized by 1H NMR spectra.     

Conformation of 2-aminomethylpyrrolidine and 2-aminomethylpiperidine in ternary platinum(II) complexes: regulation of conformation of the diamine by the coexisting ligand

Square-planar complexes with the formula [Pt(L(2))(L(1))](X)(2) x nH(2)O, where L(1) is S-2-aminomethylpyrrolidine (S-pyrda) or 2-aminomethylpiperidine (pipda) and L(2) is diammine (X=Cl), cyclobutane-1,1-dicarboxylato (cbdca) (X=none), 2,2'-bipyridine (bpy) (X=NO(3)), or 1,10-phenanthroline (phen) (X=Cl), were prepared and the nature of the coordination of L(1) was examined by (1)H-NMR spectroscopy and X-ray crystallography. These 2-aminomethylazacycloalkane derivatives form five-membered chelate rings condensed with an azacycloalkane ring in cis- or trans-configurations. The (1)H-NMR spectrum of complexes with S-pyrda as L(1) were consistent with cis-condensed rings in an S(N) conformation with any of L(2) group. However, (1)H-NMR spectra of the complexes with pipda as L(1) indicated trans-fused successive rings for the diammine and cbdca as L(2), but spectra for bpy and phen as L(2) were consistent with a conformation having cis-fused successive rings. X-Ray crystallography data for the two complexes with pipda as L(1) and cbdca (1) and bpy (2) as L(2) confirms the different coordination behavior in the solid state.     

Microbial metabolism of biologically active secondary metabolites from Nerium oleander L

Ursolic acid (1) and kaempferol (3) are two major constituents of the Mediterranean plant Nerium oleander L. Microbial metabolism of (1) with Aspergillus flavus (ATCC 9170) resulted in the formation of 3-oxo-ursolic acid derivative, ursonic acid (2). On the other hand, Cunninghamella blakesleeana (ATCC 8688A) was able to convert (3) into kaempferol 3-O-beta-D-glucopyranoside (4) as well as the new natural product kaempferol 4'-sulfate (5). Incubation of kaempferol with Mucor ramannianus (ATCC 9628) led to the isolation of one metabolite identified as kaempferol 4'-O-alpha-L-rhamnopyranoside (6). Transformation of kaempferol to the new compound kaempferol 7-O-beta-D-4-O-methylglucopyranoside (7) and herbacetin 8-O-beta-D-glucopyranoside (8) was observed after fermentation with Beauveria bassiana (ATCC 13144). Cytotoxic as well as antioxidant activities of the isolated metabolites were determined.     

New Cu(II) compounds with ligands synthesized through nucleophilic addition of pyrazoles to dicyanamide. Synthesis,crystal structures and spectroscopy

Three newly synthesized ligands, i.e. (pyrazolecarbimido)-cyanoamine (abbreviated as Hdcapz), (3-methylpyrazolecarbimido)cyanoamine (abbreviated as Hdcampz) and (3,5-dimethylpyrazolecarbimido)cyanoamine (abbreviated as Hdcadmpz) are presented in this study, including the X-ray crystal structures for two of them, as well as their coordination behaviour with respect to Cu(II).     

Mesoporous Co3O4 monolayer hollow-sphere array as electrochemical pseudocapacitor material

A Co(3)O(4) monolayer hollow-sphere array with mesoporous walls exhibits high pseudocapacitances of 358 F g(-1) at 2 A g(-1) and 305 F g(-1) at 40 A g(-1), as well as excellent cycling stability for application as pseudocapacitors.     

Measurement of inclusion complex formation between cyclophane and biological relevant amino acids using electrospray ionization, cold-spray ionization and fast atom bombardment mass spectrometry

The investigation of the host-guest complex formations between cyclophane (TGDMAP) (1) as a host and L-acidic amino acids such as L-glutamic acid (Glu) and L-aspartic acid (Asp) as guests was carried out using fast atom bombardment (FAB), electrospray ionization (ESI) and cold-spray ionization (CSI) mass spectrometry (MS). The stability constant (K(s)) values obtained by the three different MS methods almost agreed. However, the complex ion peaks of a novel cyclophane (CPCn) (2) with Glu and Asp were not observed in FAB-MS. Then, these host-guest complex formations by use of CSI-MS and ESI-MS was examined, as the results, these complex ion peaks were observed clearly and the measurement values by the two MS methods are mostly in agreement. It was concluded that ESI-MS and CSI-MS are available for the determination of K(s) value as well as FAB-MS.     

Fullerenes without symmetry: crystallographic characterization of C1(30)-C90 and C1(32)-C90

Fullerenes are generally considered as highly symmetric, yet fullerene isomers with only C(1) symmetry, such as C(1)(30)-C(90) and C(1)(32)-C(90) whose structures are reported here, become increasingly numerous as fullerene size increases.     

Über neue Sulfinyl- und Carbonyl-Pseudohalogen-Verbindungen

New Sulfinyl and Carbonyl Pseudohalogen Compounds FSO(NCO) ( 1 ) is formed as well during the attempt of synthesizing fluoroformyl sulfinylimide from OCFBr and Hg(NSO)₂ by an unexpected rearrangement as from OSFCl and Hg(NCO)₂ directly. FSO(NSOF₂) ( 2 ) was obtained analogously. Trying to get OS(NCO)₂, OC(NCO) (NSO) ( 3 ) was formed again by rearrangement as well as from ClCO(NCO) and Hg(NSO)₂.     

Lewis base stabilized phosphanylborane

The abstraction of the Lewis acid from [W(CO)(5)(PH(2)BH(2)NMe(3))] (1) by an excess of P(OMe(3))(3) leads to the quantitative formation of the first Lewis base stabilized monomeric parent compound of phosphanylborane [H(2)PBH(2)NMe(3)] 2. Density functional theory (DFT) calculations have shown a low energetic difference between the crystallographically determined antiperiplanar arrangement of the lone pair and the trimethylamine group relative to the P-B core and the synperiplanar conformation. Subsequent reactions with the main-group Lewis acid BH(3) as well as with an [Fe(CO)(4)] unit as a transition-metal Lewis acid led to the formation of [(BH(3))PH(2)BH(2)NMe(3)] (3), containing a central H(3)B-PH(2)-BH(2) unit, and [Fe(CO)(4)(PH(2)BH(2)NMe(3))] (4), respectively. In oxidation processes with O(2), Me(3)NO, elemental sulfur, and selenium, the boranylphosphine chalcogenides [H(2)P(Q)BH(2)NMe(3)] (Q = S 5 b; Se 5 c) as well as the novel boranyl phosphonic acid [(HO)(2)P(O)BH(2)NMe(3)] (6 a) are formed. All products have been characterized by spectroscopic as well as by single-crystal X-ray structure analysis.     

On the syntheses and some reactions of bis- and tris(methylthio)thiophenes

Reaction between various thienyllithium derivatives and dimethyl disulfide has been used for the preparation of 2,5-, 2,3-, and 3,4-bis(methylthio)thiophenes, as well as 2,3,4- and 2,3,5-tris(methylthio)thiophenes. Bromination of (methylthio)thiophenes with N-bromosuccinimide was found to be most convenient for the preparation of brominated (methylthio)thiophenes such as 3-bromo-2,5-bis(methylthio)- and 5-bromo-2,3-bis(methylthio)thiophene, 3,4-dibromo-2,5-bis(methylthio)-, 2,5-dibromo-3,4-bis(methylthio)- and 2,3-dibromo-4,5-bis(methylthio)thiophene as well as 3-bromo-2,4,5-tris(methylthio)thiophene. The reaction of methylthio substituted thienyllithium derivatives with methyl chloroformate was used for the syntheses of methyl methylthio substituted thiophenecarboxylates and using 1/3 of an equivalent for the direct preparation of methylthio substituted 3-thienylcarbinols as tris[2,4,5-tris(methylthio)-3-thienyl]carbinol.     

A highly selective and sensitive thorium(IV) PVC membrane electrode based on a dithio-tetraaza macrocyclic compound.

A poly(vinyl chloride)-based membrane composed of dithio-tetraaza macrocyclic compound as a neutral carrier with sodium tetraphenylborate (NaTPB) as an anion excluder and nitrobenzene (NB) as plasticizer was prepared and investigated as a Th(IV)-selective electrode. The electrode exhibits a Nernstian slope of 14.2 +/- 0.3 mV per decade over a wide concentration range (1.0 x 10(-6) to 1.0 x 10(-1) M) with a detection limit of 8.0 x 10(-7) M between pH 3.5 and 9.5. The response time of the sensor is about 10 s and it can be used over a period of 5 months without any divergence in potential. The proposed membrane sensor revealed a good selectivity for Th(IV) over a wide variety of other metal ions and proved to be a better electrode in many respects than those reported in the literature. It was successfully applied as an electrode indicator as well as in the direct determination of thorium ions in standard and real samples.     

Iron tris(dibenzoylmethane)-centered polylactide stars: multiple roles for the metal complex in lactide ring-opening polymerization

Poly(lactic acid) (PLA)-supported dibenzoylmethane (dbm) and corresponding metal complexes have potential applications as biomaterials and catalysts. Using hydroxyl-functionalized dbm (i.e., dbmOH) as the initiator and Sn(oct)2 as the catalyst, lactide ring-opening polymerizations were unexpectedly slow (6 h), and PDIs broadened when molecular weights >10 000 were targeted. Because interactions between the dbm ligand and Sn(oct)2 may be responsible for the diminished catalyst activity and molecular weight control, iron(III) was employed as a protecting group to form Fe(dbmOH)3. Shorter reaction times (10 min) were noted with this trifunctional metalloinitiator and Sn(oct)2, and higher molecular weights were achievable. Moreover, it was discovered that Fe(dbmOH)3 serves not only as an initiator but also as a catalyst and activating group for the polymerization. Even without the tin catalyst, iron-centered polymers with low PDIs (<1.1) were obtained within 10 min ( approximately 70% monomer conversion). The resulting Fe(dbmPLA)3 stars were demetalated by acid treatment to generate dbmPLA for subsequent coordination to other metals. To explore the scope of iron beta-diketonate complexes as catalysts, additional studies were performed with dbmOH and benzyl alcohol initiators using either iron tris(dbm) or iron tris(acac) (acac = acetylacetonate) as the catalyst. Here too, PLA products were obtained, and the iron catalysts were readily separated by treatment with aqueous HCl.     

The effects of anion variation and ligand derivatization on silver coordination networks based upon weaker interactions

This article presents a series of silver(I) coordination networks based upon nonchelating bidentate thioether ligands. Frameworks using AgOTs as the silver(I) starting material form two-dimensional frameworks and are quite stable as shown by differential scanning calorimetry/thermogravimetric analysis (DSC/TGA) data. The networks are sufficiently robust as to maintain the same layered motif when the basic skeleton of the ligand is sequentially derivatized with -OEt, OBu, and OHex groups. Crystal structures of the AgOTs complexes of the underivatized and bis(hexoxy) derivatives, compounds 5 and 8, respectively, are presented as well as powder X-ray diffraction (PXRD) data of the other complexes. For 5, C20H20S3O3Ag, crystal data are as follows: monoclinic, space group P2(1)/n, a = 11.8117(5) A, b = 7.8813(5) A, c = 22.3316(10) A, beta = 102.245(5) degrees, V = 2031.6(2) A(3), Z = 4. For 8, C30H44S3O6Ag, crystal data are as follows: triclinic, space group Ponebar a = 8.445(4) A, b = 10.855(5) A, c = 19.308(9) A, alpha = 84.53(1) degrees, beta = 78.76(1) degrees, gamma = 68.43(1) degrees V = 1613.9(13) A(3), Z = 2. Changing the silver(I) starting material to AgPF6 results in a shift to a one-dimensional structure, 9, as shown by X-ray crystallography and in highly compromised stability. For 9, C14H16S2N2PF6Ag, crystal data are as follows: monoclinic, space group P2/n, a = 11.9658(11) A, b = 3.9056(4) A, c = 19.6400(18) A, beta = 92.87(1) degrees, V = 916.70(15) A(3), Z = 4.     

Symmetrical and unsymmetrical pincer complexes with group 10 metals: synthesis via aryl C-H activation and some catalytic applications

Aryl-based pincer metal complexes with anionic terdentate ligands have been widely applied in organic synthesis, organometallic catalysis and other related areas. Synthetically, the most simple and convenient method for the construction of these complexes is the direct metal-induced C(aryl)-H bond activation, which can be fulfilled by choosing the appropriate functional donor groups in the two side arms of the aryl-based pincer preligands. In this perspective, we wish to summarize some results achieved by our group in this context. Successful examples include symmetrical chiral bis(imidazoline) NCN pincer complexes with Ni(II), Pd(II) and Pt(II), bis(phosphinite) and bis(phosphoramidite) PCP pincer Pd(II) complexes, unsymmetrical (pyrazolyl)phosphinite, (amino)phosphinite and (imino)phosphinite PCN pincer Pd(II) complexes, chiral (imidazolinyl)phosphinite and (imidazolinyl)phosphoramidite PCN pincer complexes with Ni(II) and Pd(II) as well as unsymmetrical (oxazolinyl)amine and (oxazolinyl)pyrazole NCN' pincer Pd(II) complexes. Among them, the P-donor containing complexes are efficiently synthesized by the "one-pot phosphorylation/metalation" method. The obtained symmetrical and unsymmetrical pincer complexes have been used as catalysts in Suzuki-Miyaura reaction (Pd), asymmetric Friedel-Crafts alkylation of indole with trans-β-nitrostyrene (Pt) as well as in asymmetric allylation of aldehyde and sulfonimine (Pd). In the Suzuki couplings conducted at 40-50 °C, some unsymmetrical Pd complexes exhibit much higher activity than the related symmetrical ones which can be attributed to their faster release of active Pd(0) species resulting from the hemilabile coordination of the ligands. Literature results on the synthesis of some related pincer complexes as well as their activities in the above catalytic reactions are also presented.     

温敏性嵌段共聚物纳米胶束的制备及其稳定性

通过N-异丙基丙烯酰胺(NIPAAm)和N,N-二甲基丙烯酰胺(DMAAm)在链转移剂巯基乙醇存在下的自由基共聚,制备了具有端羟基的共聚物P(NIPAAm-co-DMAAm).利用其端羟基在异辛酸亚锡催化下引发己内酯开环聚合,得到了两亲性嵌段共聚物P(NIPAAm-co-DMAAm)-b-PCL,并在聚己内酯(PCL)链末端引入可光催化反应的不饱和双键.通过1H-NMR、GPC和相转变温度(LCST)等方法对聚合物进行了结构表征,测定了嵌段共聚物形成胶束的临界胶束浓度和胶束粒径,比较了核交联前后胶束的粒径和稳定性.结果表明:通过调节共聚物的组成,可获得LCST在40℃附近的胶束,胶束经核交联后,粒径有所减小,但稳定性明显提高,可用于对药物的温敏控制释放.