γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

Hydrocarbon species mu3-CCH2-, mu3-CCH3 and mu-CHCH3 supported on Ti3O3

Treatment of the mu3-ethylidyne complex [{TiCp*(mu-O)}3(mu3-CMe)](1), (Cp*=eta5-C5Me5) with alkali metal amides leads to the oxoheterometallocubane derivatives [M(mu3-O)3{(TiCp*)3(mu3-CCH2)}] [M = Li (2), Na (3), K (4), Rb (5), Cs (6)] containing the naked carbanion mu3-CCH2-; the addition of triphenylmethanol and tert-butanol to the compounds 2-6 gives rise to the oxoderivatives [{TiCp*(mu-O)}3(mu-CHMe)(OCR3)][R = Me (7), Ph (8)] which show a mu-ethylidene bridge on the surface model Ti3O3.     

Analysis of the intermolecular interactions between CH3OCH3, CF3OCH3, CF3OCF3, and CH2F2, CHF3

The intermolecular interaction energy curves of CH(3)OCH(3)-CH(2)F(2), CF(3)OCH(3)-CH(2)F(2), CF(3)OCF(3)-CH(2)F(2), CH(3)OCH(3)-CHF(3), CF(3)OCH(3)-CHF(3), and CF(3)OCF(3)-CHF(3) complexes were calculated by the MP2 level ab initio molecular orbital method using the 6-311G** basis set augmented with diffuse polarization functions. We investigate the fluorine substitution effects of both methane and dimethyl ether on intermolecular interactions. In addition, orientation dependence of intermolecular interaction energies is also studied with utilizing eight types of orientations. Our analyses demonstrate that partial fluorinations of methane make electrostatic interaction dominant, and consequently enhance attractive interaction at several specific orientations. On the contrary, fluorine substitutions of dimethyl ether substantially decrease the electrostatic interaction between ether and CH(2)F(2) or CHF(3); thus, there is no such characteristic interaction between the C-H of fluorinated methane and ether oxygen of CF(3)OCF(3) as conventional hydrogen bonding, due to reduced polarity of fluorinated ether. The combination of different pairs of the electrostatic interaction is therefore responsible for the intermolecular interaction differences among the complexes investigated herein and also their orientations.     

Die Perthioborate RbBS3, TIBS3 und TI3B3S10

The Perthioborates RbBS₃, TIBS₃, and Tl₃B₃S₁₀ . RbBS₃ (P2₁/c, a=7.082(2) Å, b=11.863(4) Å, c=5.794(2) Å, β=106.54(2)°) was prepared as colourless, plate-shaped crystals by reaction of stoichiometric amounts of rubidium sulfide, boron, and sulfur at 600°C and subsequent annealing. TlBS₃ (P2₁/c, a=6.874(3) Å, b=11.739(3) Å, c=5.775(2) Å, β=113.08(2)°) which is isotypic with RbBS₃ was synthesized from a sample of the composition Tl₂S · 2 B₂S₃. The glassy product which was obtained after 7 h at 850°C was annealed in a two zone furnace for 400 h at 400→350°C. Yellow crystals of TlBS₃ formed at the warmer side of the furnace. Tl₃B₃S₁₀ (P1 , a=6.828(2) Å, b=7.713(2) Å, c=13.769(5) Å, α=104.32(2)°, β=94.03(3)°, γ=94.69(2)°) was prepared as yellow plates from stoichiometric amounts of thallium sulfide, boron, and sulfur at 850°C and subsequent annealing. All compounds contain tetrahedrally coordinated boron. The crystal structures consist of polymeric anion chains. In the case of RbBS₃ and TlBS₃ nonplanar five-membered B₂S₃ rings are spirocyclically connected via the boron atoms. To obtain the anionic structure of Tl₃B₃S₁₀ every third B₂S₃ ring of the polymeric chains of MBS₃ is to be substituted by a six-membered B(S₂)₂B ring.     

Intermolecular vibrational spectra of C3v CXY3 Molecular Liquids, CHCl3, CHBr3, CFBr3, and CBrCl3

We report the quality anisotropic intermolecular vibrational spectra within the frequency range 0.5-800 cm(-1) of four C(3v) CXY(3) molecular liquids, CHCl(3), CHBr(3), CFBr(3), and CBrCl(3), by means of femtosecond optical-heterodyne-detected Raman-induced Kerr effect spectroscopy. The results show that the first moment of the intermolecular vibrational spectrum is proportional to the square root of the value of the surface tension divided by the liquid density. This implies that the intermolecular vibrational spectrum reflects the bulk properties of the liquids. To understand the molecular-level aspects of the intermolecular vibrational spectra of the liquids, the spectra are compared with the molecular properties such as molecular weight, rotational constants, and bimolecular interaction energy. Overall, the first moment of the spectrum moderately correlates to the inverse square roots of both the molecular weight and the fast rotational constant. Therefore, the molecular properties are responsible for the intermolecular vibrational spectrum. Plots of the first moment of the intermolecular vibrational spectrum vs the square root of the value of the simple bimolecular interaction energy divided by the molecular surface area and the molecular weight show a linear correlation in the case of the oblate symmetric top molecular liquids, CHCl(3), CHBr(3), and CFBr(3). However, CBrCl(3), which is a prolate symmetric top molecular liquid, does not show the same correlation for the oblate molecular liquids.     

Association rate constants for reactions between resonance-stabilized radicals: C3H3 + C3H3, C3H3 + C3H5, and C3H5 + C3H5

Reactions between resonance-stabilized radicals play an important role in combustion chemistry. The theoretical prediction of rate coefficients and product distributions for such reactions is complicated by the fact that the initial complex-formation steps and some dissociation steps are barrierless. In this paper direct variable reaction coordinate transition state theory (VRC-TST) is used to predict accurately the association rate constants for the self and cross reactions of propargyl and allyl radicals. For each reaction, a set of multifaceted dividing surfaces is used to account for the multiple possible addition channels. Because of their resonant nature the geometric relaxation of the radicals is important. Here, the effect of this relaxation is explicitly calculated with the UB3LYP/cc-pvdz method for each mutual orientation encountered in the configurational integrals over the transition state dividing surfaces. The final energies are obtained from CASPT2/cc-pvdz calculations with all pi-orbitals in the active space. Evaluations along the minimum energy path suggest that basis set corrections are negligible. The VRC-TST approach was also used to calculate the association rate constant and the corresponding number of states for the C(6)H(5) + H --> C(6)H(6) exit channel of the C(3)H(3) + C(3)H(3) reaction, which is also barrierless. For this reaction, the interaction energies were evaluated with the CASPT2(2e,2o)/cc-pvdz method and a 1-D correction is included on the basis of CAS+1+2+QC/aug-cc-pvtz calculations for the CH(3) + H reference system. For the C(3)H(3) + C(3)H(3) reaction, the VRC-TST results for the energy and angular momentum resolved numbers of states in the entrance channels and in the C(6)H(5) + H exit channel are incorporated in a master equation simulation to determine the temperature and pressure dependence of the phenomenological rate coefficients. The rate constants for the C(3)H(3) + C(3)H(3) and C(3)H(5) + C(3)H(5) self-reactions compare favorably with the available experimental data. To our knowledge there are no experimental rate data for the C(3)H(3) + C(3)H(5) reaction.     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

Syntheses and Crystal Structures of the Novel Ternary Thioborates Na3BS3, K3BS3, and Rb3BS3

The orthothioborates Na₃BS₃, K₃BS₃ and Rb₃BS₃ were prepared from the metal sulfides, amorphous boron and sulfur in solid state reactions at temperatures between 923 and 973 K. In a systematic study on the structural cation influence on this type of ternary compounds, the crystal structures were determined by single crystal X‐ray diffraction experiments. Na₃BS₃ crystallizes in the monoclinic space group C2/c (No. 15) with a = 11.853(14) Å, b = 6.664(10) Å, c = 8.406(10) Å, β = 118.18(2)° and Z = 4. K₃BS₃ and Rb₃BS₃ are monoclinic, space group P2₁/c (No. 14) with a = 10.061(3) Å, b = 6.210(2) Å, c = 12.538(3) Å, β = 112.97(2) and a = 10.215(3) Å, b = 6.407(1) Å, c = 13.069(6) Å, β = 103.64(5)°, Z = 4. The potassium and rubidium compounds are not isotypic. All three compounds contain isolated [BS₃]^3– anions with boron in a trigonal‐planar coordination. The sodium cations in Na₃BS₃ are located between layers of orthothioborate anions, in the case of K₃BS₃ and Rb₃BS₃ stacks of [BS₃]^3– entities are connected via the corresponding cations. X‐ray powder patterns were measured and compared to calculated ones obtained from single crystal X‐ray structure determinations.     

Liquefaction of solid-state BH3NH3 by gaseous NH3

This paper reports for the first time that under ammonia atmosphere, ammonia borane (AB) reversibly absorbs up to at least 6 equiv of NH(3), forming liquid AB(NH(3))(n) (n = 1-6) complexes at 0 °C. Reasonable structures for AB(NH(3))(n) were identified via density functional theory calculations, which indicate that the strong classical hydrogen bond formed between the lone pair of NH(3) and the -NH(3) of AB is the driving force for the absorption of ammonia by AB. By use of the van't Hoff equation, the enthalpy change (ΔH) for AB to absorb one NH(3) was determined to be -2.24 kcal/mol, which is in good agreement with the theoretical calculations. Other organic amines were screened to further confirm the role of the N lone pair; only 1,4-diazabicyclo[2.2.2]octane (DABCO) formed a stable adduct, which X-ray structural analysis showed was the DABCO-BH(3) species. Finally, Raman spectra of AB(NH(3))(n) were collected, and its unique spectral features are also discussed.     

Facile synthesis and multicolor luminescent properties of uniform Lu2O3:Ln (Ln=Eu3+, Tb3+, Yb3+/Er3+, Yb3+/Tm3+, and Yb3+/Ho3+) nanospheres

Multicolor Lu(2)O(3):Ln (Ln=Eu(3+), Tb(3+), Yb(3+)/Er(3+), Yb(3+)/Tm(3+), and Yb(3+)/Ho(3+)) nanocrystals (NCs) with uniform spherical morphology were prepared through a facile urea-assisted homogeneous precipitation method followed by a subsequent calcination process. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectrum (EDS), Fourier transformed infrared (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), and photoluminescence (PL) spectra as well as kinetic decays were employed to characterize these samples. The XRD results reveal that the as-prepared nanospheres can be well indexed to cubic Lu(2)O(3) phase with high purity. The SEM images show the obtained Lu(2)O(3):Ln samples consist of regular nanospheres with the mean diameter of 95 nm. And the possible formation mechanism is also proposed. Upon ultraviolet (UV) excitation, Lu(2)O(3):Ln (Ln=Eu(3+) and Tb(3+)) NCs exhibit bright red (Eu(3+), (5)D(0)→(7)F(2)), and green (Tb(3+), (5)D(4)→(7)F(5)) down-conversion (DC) emissions. Under 980 nm NIR irradiation, Lu(2)O(3):Ln (Ln=Yb(3+)/Er(3+), Yb(3+)/Tm(3+), and Yb(3+)/Ho(3+)) NCs display the typical up-conversion (UC) emissions of green (Er(3+), (4)S(3/2),(2)H(11/2)→(4)I(15/2)), blue (Tm(3+), (1)G(4)→(3)H(6)) and yellow-green (Ho(3+), (5)F(4), (5)S(2)→(5)I(8)), respectively.     

The system KPO3-Y(PO3)3

The previously unknown binary system KPO₃-Y(PO₃)₃ has been examined by thermal, X-ray and microscopic analysis and its phase diagram provided. The existence of the compound KY(PO₃)₄ has been confirmed. Its melting point (700°, incongruent) and basic parameters of the unit cell (monoclinic system, space group P2_1/n, lattice parameters: a=7.36, b=8.36, c=14.39 Å, =96.1°) have been determined. The new, so far unknown, compound has been discovered and assigned the formula K₂Y(PO₃)₅. It has been found that it forms peritectoidally (in the solid phase) at 642°.

---

Zusammenfassung Das zuvor unbekannte binäre System KPO₃-Y(PO₃)₃ wurde mittels Thermo-, Röntgendiffraktions- und mikroskopischer Analyse untersucht und das Phasendiagramm aufgestellt. Die Existenz der Verbindung KY(PO₃)₄ wurde dabei bekräftigt. Ihr Schmelzpunkt (700°, inkongruent) und die grundlegenden Parameter der Elementarzellen (monoklines System, Raumgruppe P2_1/n, Gitterkonstanten: a=7.36, b=8.36, c=14.39 Å, =96.1°) wurden ermittelt. Weiterhin wurde eine neue, bislang unbekannte Verbindung mit der Formel K₂Y(PO₃)₅ entdeckt. Sie verfügt (in fester Phase) über ein Peritektikum bei 642°.

---

---

This paper was included in the CPBP-01.18 problem and was financially supported by the Ministry of National Education.     

3, 3, 3-Trifluoropropyl(methyl)cyclosiloxanes

The influence of the number of 3, 3, 3-trifluoropropyl(methyl)siloxane links (Φ/Φ) in the cyclotetrasiloxanes Φ_mD_4-m, where D represents the dimethylsiloxane link and m=0–4, on the rearrangement of these compounds in acetone solution under the action of sodium siloxanolate has been studied. The rearrangement takes place with the formation of a linear polysiloxane the degradation of which yields, in addition to the initial ring, cyclosiloxanes with a different structure. The rate of rearrangement of Φ_mD_4-m and of the formation of a linear polysiloxane rises with an increase in m from 0 to 3. The equilibrium concentration of the linear polysiloxane formed from Φ_mD_4-m is inversely proportional to m. Results have been obtained on the kinetics of the formation of the cyclosiloxanes Φ_mD_n, where m=0–5, n=0–5, and m+n=3–6, in the rearrangement of the rings ΦD₃, Φ₂D₂, Φ₃D, and Φ₄. The reactivity of the siloxane links rises in the sequence ～ (CH₃)₂Si-O-Si(CH₃)₂ ～<～ (CF₃CH₂CH₂)-(CH₃) Si-O-Si(CH₃)₂ ～<(CF₃CH₂CH₂) (CH₃)Si-O-Si(CH₃) (CH₂CH₂CF₃) ～. Because of the negative inductive effect transferred through the siloxane links, the 3, 3, 3-trifluoropropyl groups strongly activate the siloxane ring with respect to nucleophiiic reagents.     

An improved synthesis of 3-deazaeytosine, 3-deazauracil, 3-deazacytidine,and 3-deazauridine

3-Dcazacytosine (4-amino-2-pyridone, 3 ), 3-doazauracil (4-hydroxy-2-pyridone, 5 ), 3-deaza-cytidine (4-amino-1-β-D-ribofuranosyl-2-pyridonc, 9 ), and 3-deazauridine (4-hydroxy-1-β-D-ribo-furanosyl-2-pyridone, 11 ) were prepared in high overall yields from 1-methoxy-1-buten-3-yne ( 1 ). Ethyl 3,5,5-triethoxy-3-pentenoate ( 2 ), obtained from acylatioti of 1 with diethyl carbonate and subsequent in situ conjugate addition of ethoxide, was cyelized with ammonia to provide 3 . Diazotization of 3 and subsequent in situ hydroxydediazotization afforded 5 . Nucleoside 9 was obtained from the stannic chloride-catalyzed condensation of bis-trimethylsilylated 3 and 1-O-acetyl-2,3,5-tri-O-benzoyl-β-D-ribofuranose ( 7 ), followed by ammonolysis of the blocking groups. Diazotization of 9 and subsequent in situ hydroxydediazotization afforded nucleosidc 11 .     

Shock tube investigation of CH3 + CH3OCH3

The title reaction has been investigated in a diaphragmless shock tube by laser schlieren densitometry over the temperature range 1163-1629 K and pressures of 60, 120, and 240 Torr. Methyl radicals were produced by dissociation of 2,3-butanedione in the presence of an excess of dimethyl ether. Rate coefficients for CH(3) + CH(3)OCH(3) were obtained from simulations of the experimental data yielding the following expression which is valid over the range 1100-1700 K: k = (10.19 ± 3.0)T(3.78)?exp((-4878/T)) cm(3) mol(-1)s(-1). The experimental results are in good agreement with estimates by Curran and co-workers [Fischer, S. L.; Dryer, F. L.; Curran, H. J. Int. J. Chem. Kinet.2000, 32 (12), 713-740. Curran, H. J.; Fischer, S. L.; Dryer, F. L. Int. J. Chem. Kinet.2000, 32 (12), 741-759] but about a factor of 2.6 lower than those of Zhao et al. [Zhao, Z.; Chaos, M.; Kazakov, A.; Dryer, F. L. Int. J. Chem. Kinet.2008, 40 (1), 1-18].     

Dimethylarsenazid (CH3)2AsN3, Dimethylwismutazid (CH3)2BiN3 und Dimethylthalliumzid (CH3)2TiN3

The reaction of (CH₃)₂AsJ and AgN₃ yields (CH₃)₂AsN₃; a colourless liquid (b. p. 136°C) which dissolves as a monomeric in benzene. (CH₃)₂BiN₃ is precipitated in form of colourless needles (dec. temp. 150°C) from an etherical solution of Bi(CH₃)₃ and HN₃. According to its vibrational and mass spectra the molecules are not associated although the (CH₃)₂BiN₃ is not soluble; dipole association of this polar molecules is assumed for the crystal structure. (CH₃)₂TlN₃ can be obtained from TI(CH₃)₃ and ClN₃ as well as from (CH₃)₂TlOH and HN₃ in form of colourless needles and leaves (dec. temp. 245°C). According to its vibrational spectra it has an ionic structure, (CH₃? Tl? CH₃)⁺N^?₃.     

CCSD(T) study of CD3-O-CD3 and CH3-O-CD3 far-infrared spectra

From a vibrationally corrected 3D potential energy surface determined with highly correlated ab initio calculations (CCSD(T)), the lowest vibrational energies of two dimethyl-ether isotopologues, (12)CH(3)-(16)O-(12)CD(3) (DME-d(3)) and (12)CD(3)-(16)O-(12)CD(3) (DME-d(6)), are computed variationally. The levels that can be populated at very low temperatures correspond to the COC-bending and the two methyl torsional modes. Molecular symmetry groups are used for the classification of levels and torsional splittings. DME-d(6) belongs to the G(36) group, as the most abundant isotopologue (12)CH(3)-(16)O-(12)CH(3) (DME-h(6)), while DME-d(3) is a G(18) species. Previous assignments of experimental Raman and far-infrared spectra are discussed from an effective Hamiltonian obtained after refining the ab initio parameters. Because a good agreement between calculated and experimental transition frequencies is reached, new assignments are proposed for various combination bands corresponding to the two deuterated isotopologues and for the 020 → 030 transition of DME-d(6). Vibrationally corrected potential energy barriers, structural parameters, and anharmonic spectroscopic parameters are provided. For the 3N - 9 neglected vibrational modes, harmonic and anharmonic fundamental frequencies are obtained using second-order perturbation theory by means of CCSD and MP2 force fields. Fermi resonances between the COC-bending and the torsional modes modify DME-d(3) intensities and the band positions of the torsional overtones.     

K3BiSe3, Rb3BiSe3 und Cs3BiSe3 – Substitutionsvarianten des Th3P4-Typs

K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ – Derivatives of the Th₃P₄ Structure Type The compounds K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ were synthesized by heating mixtures of Bi₂O₃ and the respective alkalicarbonate in a stream of hydrogen saturated by selenium at 850°C. Thin crystals of the compounds appear red in transmitted light. They crystallize isostructural with Na₃AsS₃, space group P2₁3, lattice constants a = 9.771(5) Å, a = 10.161(3) Å, and a = 10.587(5) Å for K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃, respectively. The Na₃AsS₃ structure type is a derivative of the Th₃P₄ structure type.     

3-oxo-3-phosphapentopyranoses

Addition of methyl phosphinate to 2(R)-methoxy 3-oxapentanedial gives all eight possible diastereoisomeric 3-phosphapentopyranoses in very poor yield. Structures and stereochemistry are assigned on the basis of ¹H, ³¹P, NMR, and mass spectroscopy of their acetates. © 1996 John Wiley & Sons, Inc.     

Phosphine-ligated induced formation of thallium(I) full Pt3TlPt3 sandwich versus "open-face" TlPt3 sandwich with triangular Pt3(mu2-CO)3(PR3)3 units: synthesis and structural/spectroscopic analysis of triphenylphosphine [(mu3-Tl)Pt3(mu2-CO)3(PPh3)3]+ and its (mu3-AuPPh3)Pt3 analogue

This research constitutes an operational test to assess the influence of platinum-attached phosphine ligands in the formation process of "open-face" TlPt3 or "full" Pt3TlPt3 sandwich clusters. Accordingly, the reaction of TlPF6 with triphenylphosphine Pt4(mu2-CO)5(PPh3)4, under essentially identical boundary conditions originally used to prepare (90% yield) the triethylphosphine "full" Pt3TlPt3 sandwich, [(mu6-Tl)Pt6(mu2-CO)6(PEt3)6]+ (3) ([PF6]- salt), from Pt4(mu2-CO)5(PEt3)4 was carried out to see whether it would likewise afford the unknown triphenylphosphine Pt3TlPt3 sandwich analogue of or whether the change of phosphine ligands from sterically smaller, more basic PEt3 to PPh3 would cause the product to be the corresponding unknown triphenylphosphine "open-face" TlPt3 sandwich that would geometrically resemble the known bulky tricyclohexylphosphine [(mu3-Tl)Pt3(mu2-CO)3(PCy3)3]+ sandwich (2a). Both the structure and composition of the resulting "open-face" sandwich product, [(mu3-Tl)Pt3(mu2-CO)3(PPh3)3]+ (1a) ([PF6]- salt), were unequivocally established from a low-temperature CCD X-ray crystallographic determination. The calculated Pt/Tl atom ratio (3/1) of 75%/25% is in excellent agreement with that of 72(3)%/28(5)% obtained from energy-resolved measurements on a single crystal with a scanning electron microscope. Crystals (80% yield) of the orange-red were characterized by solid-state/solution IR and variable temperature 205Tl and 31P{1H} NMR spectra; the 31P{1H} spectra provide convincing evidence that is exhibiting dynamic behavior at room temperature in CDCl3 solution. The corresponding new "open-face" (mu3-AuPPh3)Pt3 sandwich, [(mu3-AuPPh3)Pt3(mu2-CO)3(PPh3)3]+ (1b) ([PF6]- salt), was quantitatively obtained from by reaction with AuPPh3Cl and spectroscopically characterized by IR and 31P{1H} NMR spectra. A comparative geometrical evaluation of the observed steric dispositions of the platinum-attached PR3 ligands in the "open-face" (mu3-Tl)Pt3 sandwiches of (with PPh3) and the known (with PCy3) and in the known "full" Pt3TlPt3 sandwich of (with PEt3) along with the considerably different observed steric dispositions of the PR(3) ligands in the known "open-face" (mu3-AuPCy3)Pt3 sandwich of (with PCy3) and in the known "full" Pt3AuPt3 sandwich of (with PPh(3)) has been performed. The results clearly indicate that, in contradistinction to the known triphenylphosphine Pt3AuPt3 sandwich of , PPh3 and bulkier PCy3 ligands of Pt3(mu2-CO)3(PR3)3 units are sterically too large to form "full" Pt3TlPt3 sandwiches. In other words, the nature of the thallium(I) sandwich-product in these reactions is sterically controlled by size effects of the phosphine ligands. Comparative examination of bridging carbonyl IR frequencies of and with those of closely related "open-face" and "full" sandwiches provides better insight concerning the relative electrophilic capacities of Tl+, Au+, and [AuPR3]+ components in forming sandwich adducts with Pt3(mu2-CO)3(PR3)3 nucleophiles.     

Synthesis of 3-functionalized 3-methylazetidines

1-t-Butyl- and 1-(4-methylbenzyl)-3-bromo-3-methylazetidines were prepared from the corresponding N-(2,3-dibromo-2-methylpropylidene)alkylamines and their propensity to undergo nucleophilic substitution at the 3-position by different nucleophiles was assessed, providing a convenient access to novel 3-alkoxy-, 3-aryloxy-, 3-hydroxy-, 3-cyano-, 3-carboxy-, 3-(aminomethyl)- and 3-(hydroxymethyl)azetidines.