Syntheses and structures of molybdenum and tungsten pentabenzylcyclopentadienyl complexes: new chlorination reactions

[M(CpBz)(CO)₃CH₃] (M=Mo, 2a, W, 2b; CpBz=C₅(CH₂Ph)₅) have been prepared and reacted with PCl₅ and PhI · Cl₂. Depending on the metal and on the chlorinating reagent used [Mo(CpBz)(η²-COCH₃)Cl₃], 3, [W(CpBz)Cl₄], 4, [Mo(CpBz)(CO)₃Cl], 5 and [Mo(CpBz)Cl₄], 6 have been obtained. The molecular structures of all compounds are reported and two conformations have been characterised for the benzyl substituents. In complexes 2a, 2b and 5 one phenyl ring bends towards the metals while in 3 and 4 the five phenyls point opposite to the metals.     

Syntheses and crystal structures of butterfly M2Te2 complexes of molybdenum and tungsten with functionalized cyclopentadienyl ligands

Reactions of singly-bonded dinuclear complexes [(η⁵-CH₃O₂CC₅H₄)₂M₂(CO)₆] (I, M?=?Mo; II, M?=?W) with the diarenylditelluride [4-CH₃C₆H₄Te]₂ in refluxing toluene for 4–6?h afforded dinuclear complexes 1 and 2 trans/ae-[(η⁵-RC₅H₄)₂M₂(CO)₄(μ-ArTe)₂] (Ar?=?4-CH₃C₆H₄Te). Complexes 1 and 2 were also synthesized by reactions of triply-bonded dinuclear complexes [(η⁵-CH₃O₂CC₅H₄)₂M₂(CO)₄] (III, M?=?Mo; IV, M?=?W) with [4-CH₃C₆H₄Te]₂ in refluxing toluene for 1?h. Both complexes have been characterized by elemental analysis, ¹H NMR, ¹³C NMR and IR spectroscopy and X-ray diffraction. Preliminary low-temperature NMR experiments on complexes 1 and 2 have revealed that in solution each complex goes through a rapid inversion of the butterfly four-membered ring M₂Te₂.     

X-ray photoelectron spectra of polyhydrido complexes of tungsten and molybdenum

X-Ray photoelectron spectroscopy has been applied to study MH₄L₄(M = or Mo, L = PHPh₂, PMePh₂, PEtPh₂, PBuPh₂, PEt₂Ph, P(OPr-i)₃ or $\text{1}\text{2}$ dppe). It has been shown that tungsten in these compounds has a negative charge whereas the charge of molybdenum is almost zero.     

Syntheses and X-ray crystal structures of organoantimony diazides

Antimony(III) complexes of the general type LSbF(2) (3: L(1) =[tBuC(NiPr)(2)]; 4: L(2) =[tBuC(NDipp)(2) , Dipp=2,6-iPr(2)C(6)H(3)) and LSb(N(3))(2) (6: L(1); 7: L(2)) were prepared in high yields and characterized by elemental analyses, NMR and IR spectroscopy and single-crystal X-ray diffraction. Moreover, the solid-state structures of [L(2)SbF(2)][L(2)Li] (5), [L(2) AlH(2)] (1), and [L'H][L'K(thf)(3)] (2; L'=HC(NDipp)(2)) are described, in which the Li (5) and K atoms (2) adopt rather unusual coordination modes.     

Syntheses and X-ray structures of some pyrrolylaldiminate metal complexes

Several pyrrolylaldiminate complexes of Group 1, 4 and 13 metals are reported. The reaction of 5-tert-butyl-2-[(2,6-diisopropylphenyl)aldimino]pyrrole (HL) with NaH produced LNa(THF) (1). In situ lithiation of HL followed by addition of one equivalent of MCl_x (M=Zr, x=4; M=Hf, x=4, M=Al, x=3) afforded the corresponding pyrrolylaldiminate complexes, MLCl₂(μ-Cl)₂Li(OEt₂)₂ (M=Zr, 3; Hf, 4) and AlLCl₂ (5). Alkylation of 5 with MeMgBr generated AlLMe₂ (6). In addition to the spectroscopic data, complexes 3-6 were characterized by X-ray crystallography.     

Synthesis and crystal structures of supramolecular adducts of molybdenum and tungsten selenide aqua complexes with macrocyclic cavitand cucurbituril

The supramolecular compounds {[W₃Se₄Cl₃(H₂O)₆]₂[PyHC₃₆H₃₆N₂₄O₁₂]}Cl₃·18H₂O (1) and {[Cl₃SnMo₃Se₄Cl₃(H₂O)₆][Cl₃SnMo₃Se₄Cl₂(H₂O)₇](C₃₆H₃₆N₂₄O₁₂)}Cl·26H₂O (2) were isolated from solutions of the selenium-containing tungsten and molybdenum clusters [W₃Se₄(H₂O)₉]⁴⁺ and [Cl₃SnMo₃Se₄(H₂O)₉]³⁺, respectively, and organic cavitand cucurbituril. X-ray diffraction analysis demonstrated that the macrocylcic cucurbituril molecule is coordinated on both sides by the cluster cations through the formation of complementary hydrogen bonds. Compound 1 has a chain structure stabilized by Se...Se interactions between the adjacent cluster cores. In compound 2, the bridging ₂-selenium atoms of the cluster fragment Mo₃Se₄ are coordinated to the tin atom of the SnCl₃ ^– ligand, thus losing the ability to be involved in Se...Se interactions.     

Syntheses and structures of layered compounds based on lanthanides(iii) and cubane molybdenum and tungsten telluride cyano complexes

Eight isostructural polymeric coordination compounds of the general formula [Ln(DMF)(H₂O)₄][Ln(DMF)₂(H₂O)₄][M₄Te₄(CN)₁₂]·DMF·nH₂O (Ln = Er, Ho, Gd, or Sm; M = W or Mo) were prepared for the first time by evaporation in air of aqueous solutions containing the cuboidal telluride anionic complex of tungsten [W₄Te₄(CN)₁₂]^6– or molybdenum [Mo₄Te₄(CN)₁₂]^7–, lanthanide chlorides, and dimethylformamide. The resulting polymeric coordination complexes with layered structures were characterized by X-ray diffraction analysis and IR spectra. The magnetic susceptibilities of the gadolinium complexes were measured.     

Syntheses and crystal structures of two lead complexes containing tricyanomethanide

Two lead complexes [Pb(2,2′-bipy)₂(H₂O)₂(tcm)]₂·(tcm)₂·2H₂O, 1, and [Pb(phen)₂(tcm)₂], 2, have been prepared by reacting Pb(NO₃)₂, potassium tricyanomethanide (Ktcm) and 2,2-bipyridine or 10-phenanthroline, respectively. X-ray crystallography studies show that 1 is a dimer formed by two eight-coordinate [Pb(bipy)₂(H₂O)₂] units bridged by tricyanomethanide while 2 is a mononuclear six-coordinate compound with the lead atom surrounded by two phen ligands and two tricyanomethanide ions.     

Synthesis and X-ray crystal structures of some isothiosemicarbazone complexes

Transition Metal Chemistry - Four complexes of a new isothiosemicarbazone ligand have been prepared and characterized as μ2-pip-(NiL)2 (1), MnL2 (2), UO2L(BrSal)BuOH (3) and (μ2-MoO2L)2...     

Syntheses and crystal structures of ruthenium carbonyl complexes containing pyridine-alkoxide ligands

Transition Metal Chemistry - The reactions of pyridine alcohols PyCH2C(R1R2)OH [R1?=?H, R2?=?4-BrC6H4 (1); R1?=?H, R2?=?4-CF3C6H4 (2);...     

多(三甲硅基)取代环戊二烯基二羰基钼环卡宾配合物的合成和结构

三(三甲基硅基)环戊二烯在一缩二乙二醇二甲醚或四氢呋喃中经n-BuLi处理后, 随之与Mo(CO)6加热, 生成相应的环戊二烯基羰基钼负离子锂盐[η^5-{(Me3Si)3C5H5-n}Mo^-(CO)3]Li^+(n=2, 3)(1), 同时观察到有脱硅基现象发生。1与X(CH2)3X在一缩二乙二醇二甲醚中反应, 无论X=I或Br, 均生成标题化合物[X=I: n=3(2), n=2(3); X=Br: n=3(4), n=2(5)]。1与X(CH2)3X的反应如在THF中进行, 则只有当X=I时才能生成环卡宾钼配合物。以元素分析, IR, 1H NMR和13C NMR表征了2-5的结构, 并用X射线衍射测定了4的晶体结构。晶体属单斜晶系,空间群为P21/n, 晶胞参数a=1.2611(3), b=1.2434(2),c=1.7095(6)nm, β=91.07(2)°, V=2.680(2)nm^3,Dc=1.563g.cm^-^3, Z=4, 最终偏差因子R=0.062, Rw=0.054.     

Syntheses, spectroscopies and structures of molybdenum(VI) complexes with homocitrate

Initial investigations into the possible role of homocitric acid in iron molybdenum cofactor (FeMo-co) of nitrogenase lead us to isolate and characterize two tetrameric molybdate(VI) species. The complexes K2(NH4)2[(MoO2)4O3(R,S-Hhomocit)2].6H2O (1) and K5[(MoO2)4O3(R,S-Hhomocit)2]Cl.5H2O (2) (homocitric acid = H4homocit, C7H10O7) are prepared from the reactions of acyclic homocitric acid and molybdates, which represent the first synthetic structural examples of molybdenum homocitrate complexes. The homocitrate ligand trapped by tetranuclear molybdate coordinates to the molybdenum(VI) atom through alpha-alkoxy and alpha-, beta-carboxy groups. The physical properties, structural parameters, and their possible biological relevances are discussed.     

Some organoperoxo complexes of molybdenum and tungsten

Several new peroxo complexes of molybdenum and tungsten containing different organic ligands have been prepared. The complexes have the compositions [Mo(O)(O₂)L₂], [Mo(O)₂(O₂)L(H₃O)]⁺, [Mo(O)(O₂)L′] and [W(O)(O₂)L₂] [L = oxoquinolino, aniline-2- carboxylate, 2-aminophenoxide, picolinato or 2-carboxylatoquinolino ligand; L′ = N-(2- oxophenyl)salicylidenimino ligand], respectively. The complexes were found to oxidize allyl alcohol, and also PPh₃ and AsPh₃, to their oxides. The IR spectra of the complexes indicate that the frequency of the v₁-mode of the M(O₂) grouping, which is essentially an OO stretch, decreases with the increase in atomic number of metals in a particular group.     

Potassium carbazolyl complexes with coordinating solvents: Syntheses and crystal structures

The reaction of carbazole with KOH in dimethylformamide (DMF) at 75°C for 1.5 h affords CarbK(DMF) (CarbH is carbazole) in 90% yield. The crystallization of the compound from DME, CH₃CN, and CD₃CN gives complexes CarbK(DME)₂, CarbK(DMF)(CH₃CN), and CarbK(DMF)(CD₃CN), respectively, whose structures are determined by X-ray diffraction analyses. The dissolution of CarbK(DMF)(CH₃CN) in CD₃CN results in the deuterium exchange in the bound solvent to form complex CarbK(DMF)_0.5(CD₂HCN)_1.5, whose structure is also established by X-ray diffraction analysis.     

Syntheses and crystal structures of gadolinium and europium complexes of AAZTA analogues

Modified 6-amino-6-methylperhydro-1,4-diazepinetetraacetic acid (AAZTA) ligands with a hydroxyl arm have been synthesized and characterized. The crystal structures of its lanthanide complexes, determined by single crystal X-ray crystallography, show centrosymmetric nonacoordinated dimeric M₂L₂ forms where one carboxylate group from each ligand forms a bridge between two metal centers. Each metal center is coordinated with one inner sphere water molecule. The hydroxyl arm does not interfere in the coordination environment of the metal and therefore acts as a good anchor for attaching other functional motifs.     

Syntheses, X-ray structures and AACVD studies of group 11 ditelluroimidodiphosphinate complexes

Reactions of Na(tmeda)[N((i)Pr(2)PTe)(2)] with CuCl, AgI or AuCl (in the presence of PPh(3)) in THF produced the coinage metal ditelluroimidodiphosphinate complexes {Cu[N((i)Pr(2)PTe)(2)]}(3), (5), {Ag[N((i)Pr(2)PTe)(2)]}(6) (6) and Au(PPh(3))[N((i)Pr(2)PTe)(2)] (7), respectively. Complexes 5, 6 and 7 were characterized in the solid state by X-ray crystallography. Complex 5 is trimeric and exhibits a highly distorted Cu(3)Te(3) ring. In contrast, the Ag(I) complex 6 is a hexamer, and forms a twelve-membered Ag(6)Te(6) ring. The replacement of the (i)Pr groups on phosphorus by Ph results in an intriguing structural change to a tetramer with a boat-shaped Ag(4)Te(4) ring in {Ag[N(Ph(2)PTe)(2)}(4).2THF (8). The gold(I) complex 7 is monomeric. Aerosol-assisted chemical vapour deposition (AACVD) of compounds 5, 6 and 7 yields CuTe, Ag(7)Te(4), AuTe(2) and Au films, respectively. The films were grown at temperatures of 300-500 degrees C and characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive analysis of X-rays (EDAX).     

Preparation and properties of molybdenum and tungsten dinitrogen complexes : `XVI. Electrochemical properties of tungsten and molybdenum diazoalkane complexes

Diazoalkane complexes of type [MF(NNCRR′)(dpe)₂][BF₄] (M = Mo or W; dpe = Ph₂PCH₂CH₂PPh₂), which are easily derived from bis(dinitrogen) complexes [M(N₂)₂(dpe)₂], undergo consecutive one- and two-electron oxidations and reductions under voltammetric conditions at a platinum electrode. The ESR spectra of the species generated by the controlled potential electrolysis show that primary oxidation occurred on the metal atom (M = Mo) and reduction on the two nitrogen atoms in the diazoalkane ligands (M = Mo or W).     

Copper(II) and molybdenum(VI) complexes with 5-bromosalicylaldehyde S-allylisothiosemicarbazone: Syntheses,characterizations and crystal structures

A new tridentate Schiff base, 5-bromosalicylaldehyde S-allylisothiosemicarbazone hydrobromide (H₂L), and several new mononuclear complexes of copper(II) and molybdenum(VI) of this ligand with general formulas ([Cu(L)Im] (1)), ([Cu(L)NH₃]·4H₂O (2)), and ([MoO₂(L)1-MeIm] (3), Imidazole: Im, 1-methylimidazole: 1-MeIm) were prepared and characterized by elemental analyses, IR, proton magnetic resonance Spectroscopy, and ultraviolet–visible techniques. The physico-chemical results suggested that the H₂L coordinates in the dianionic tridentate form. Crystal structures of the Cu(II) complexes reveal a square planar configuration surrounded by the dianionic tridentate isothiosemicarbazone (ONN) and Im and NH₃ for 1 and 2, respectively. The L^2-, two oxo, and 1-methylimidazole are coordinated to molybdenum(VI) in a distorted octahedral geometry in 3. Formation of pure metal oxide residues was confirmed by thermal degradation of the complexes.     

Syntheses,structures and catalytic activities of molybdenum carbonyl complexes based on pyridine-imine ligands

Thermal treatment of pyridine imines [C₅H₄N-2-C(H)=N-C₆H₄-R] [R = H (1), CH₃ (2), OMe (3), CF₃ (4), Cl (5), Br (6)] with Mo(CO)₆ in refluxing toluene provided six novel mononuclear molybdenum carbonyl complexes of the type [(η²-2-C₅H₄N)CH=N(C₆H₄-4-R)]Mo(CO)₄ [R = H (7); CH₃ (8); OMe (9); CF₃ (10); Cl (11); Br (12)]. All of these complexes were separated by chromatography and fully characterized by elemental analysis, IR, and NMR spectroscopy. The crystal structures of complexes 7, 8 and 10 were determined by X-ray crystal diffraction analysis. In addition, the catalytic performance of these complexes was also tested, and it was found that these complexes had obvious catalytic activity on Friedel–Crafts reactions of aromatic compounds with a variety of acylation reagents.     

Arene derivatives of molybdenum and tungsten Communication 1. Anisole tricarbonyl complexes of molybdenum and tungsten

Conclusions The reaction of anisole with the molybdenum and tungsten hexacarbonyls gave the previously unknown antsole complexes (C₆H₅OCH₃)M(CO)₃.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2090–2091, September, 1973.The authors express their gratitude to P. V. Petrovskii for assistance in taking and discussing the NMR spectra.