Synthesis,spectroscopic and spectrophotometric study of BODIPY appended crown ether sensor for ion detection

A novel fluoroionophore compound was synthesized from a boron dipyrromethene (BODIPY) fluorophore and 4′-formylbenzo-15-crown-5 ionophore groups. Photophysical properties of the BODIPY-crown compound were studied with UV–Vis and fluorescence spectroscopy. The effect of metalic cations (Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Al³⁺, Fe³⁺, Cu²⁺, Co²⁺, Zn²⁺, Ag⁺, Hg²⁺, Pb²⁺) on the absorption and fluorescence spectra of compound 2 was investigated. Blue shifts were detected in UV–Vis spectra upon addition of some metal ions (Al³⁺ > Fe³⁺ > Na⁺). At the same time, the emission intensity of this complex increased due to binding of Na⁺ ion to the benzo crown cavity. Additionally, a decrease in the intensity of the 630 nm emission peak and an increase in the intensity of the 570 nm emission peak was observed in the fluorescence emission spectra following addition of Al³⁺ and Fe³⁺ ions.     

A highly selective fluorescent chemosensor for Fe (III) based on rhodamine 6G dyes derivative

A new fluorescent probe L based on the rhodamine 6G platforms for Fe³⁺ has been designed and synthesised. L showed excellent selectivity and high sensitivity for Fe³⁺ against other metal ions such as K⁺, Na⁺, Ag⁺, Cu²⁺, Co²⁺, Mg²⁺, Cd²⁺, Ni²⁺, Zn²⁺, Fe²⁺, Hg²⁺, Ce³⁺ and Y³⁺ in HEPES buffer (10 mM, pH 7.4)/CH₃CN (40:60, V/V). The distinct color change and the rapid emergence of fluorescence emission provided naked-eyes detection for Fe³⁺. The recognition mechanism of the probe toward Fe³⁺ was evaluated by Job’s plots, IR and ESI-MS. In order to further study their fluorescent properties, L + Fe³⁺ fluorescence lifetime was also measured. Moreover, the test strip results showed that these probes could act as a convenient and efficient Fe³⁺ test kit.     

Terpyridine functionalized α-cyanostilbene derivative as excellent fluorescence and naked eyes Fe<Superscript>2+</Superscript> probe in aqueous environment

A novel carbazole derivative (L) functionalized by terpyridine was designed and synthesized. Its structure was fully characterized by FT-IR, HR-MS, ¹H NMR spectra. L formed J-aggregates and possessed aggregation-induced emission enhancement property in aqueous environment. In addition, compound L showed specific response to Fe²⁺ in UV–vis spectra at 557 nm in EtOH–H₂O mixed solvent, owing to metal-to-ligand-charge-transfer (MLCT). The emission quenched much more sharply than other metal ions when adding Fe²⁺. The interaction between compound L and Fe²⁺ was analyzed by UV–vis and fluorescence spectrum titration. The limit of detection was calculated to be 1.63 μM. The stoichiometric of L and Fe²⁺ was 2:1 confirmed by Job’s plots. Competition experiment indicated that other metal ions caused little interference. In this way, L could be a fluorescent and “naked eyes” probe for Fe²⁺ detection. This dual mode Fe²⁺ sensor can be considered to have potential value in practical applications.     

A sensitive tetraphenylethene-based fluorescent probe for Zn2+ ion involving ESIPT and CHEF processes

A new tetraphenylethene-based fluorescent probe 2-(quinolin-8-yliminomethyl)-4-triphenylvinyl-phenol (HL) for detecting Zn²⁺ ion through the excited state intramolecular proton transfer (ESIPT) and chelation enhanced fluorescence (CHEF) processes has been designed and synthesized. The results show that HL emits relatively strong blue fluorescence at 460 nm without Zn²⁺ ion, however, probe HL displays highly pink fluorescent emission at 600 nm when adding Zn²⁺ ion. The fluorescent emission of HL appears an extremely large Stokes shift, which effectively reduces the interference of background signal. The limit of detection of HL for Zn²⁺ ion can reach to 9.0 × 10^–8 M.     

A fluorescent chemosensor for Cu2+ ions and its application in cell imaging

A new on-off fluorescent probe 1 for Cu²⁺ based on Schiff base compound was designed and synthesized by one-step reaction. The single probe 1 exhibited strong green fluorescence emission. A fluorescence quenching effect and faint color change were observed as soon as the Cu²⁺ was added to the probe system in H₂O/EtOH (v/v = 8:2, HEPES buffer, 0.05 M, pH = 7.4) solution. Other common metal cations did not cause the changes in the fluorescence and color of the probe 1. The optical properties were studied by the fluorescence emission and UV–Vis spectra. Meanwhile, the geometry optimizations of probe 1 and the [1-Cu²⁺] coordination complexes were also carried out by DFT using the Gaussian 09 program, in which the B3LYP function was used. Based on experimental measurement and theoretical analysis, we can know that the combination ratio of the probe and Cu²⁺ is 2:1 and the limit of detection (LOD) is as low as 5.3 × 10^?9 M Besides, the probe 1 was also used to analyze the Cu²⁺ in living cells.     

A fluorescent probe based on N-butylbenzene-1,2-diamine for Cu(II) and its imaging in living cells

A fluorescent probe LZ-N with naphthalimide as fluorophore and N-butylbenzene-1,2-diamine as a new recognition moiety for copper ion was designed and synthesized. The probe LZ-N exhibits high selectivity for Cu²⁺ ion in aqueous media (CH₃CN:H₂O = 1:1) over all the other metal ions in our study, more than 20-fold fluorescence enhancement by coordinating with Cu²⁺, and the maximum emission intensity independence in the range of pH 2.06–9.25. The results of ¹H-NMR titration, time-resolved fluorescence decay measurement, and computational optimization illuminate the mechanisms of Cu²⁺ and probe LZ-N. Confocal fluorescence images and cell viability values test show the high fluorescence enhancement of probe LZ-N for exogenous Cu²⁺ in living cells.     

Highly selective fluorescence turn-on determination of fluoride ions via chromogenic aggregation of a silyloxy-functionalized salicylaldehyde azine

A novel fluorescent chemsensor TBS-protected salicylaldehyde azine (TSAA) for fluoride ion was developed based on aggregation-induced emission (AIE). The probe TSAA was prepared by the reaction of salicylaldehyde azine (SAA) with tert-butyldimethylsilyl chloride (TBS-Cl) via an unusual synthetic methodology and shows only non-emission. Upon treatment with fluoride in aqueous MeCN solution, the TBS protective group of probe TSAA was removed readily and the fluorescence of the probe was switched on, which resulted in a new fluorescence peak around 543 nm. The fluorescent intensity at 543 nm increases linearly with fluoride ion concentration in the range 1–50 μmol L^?1. This proposed probe shows excellent selectivity toward fluoride ion over other common anions and cations.     

A S2O32−‐Enhanced Fluorogenic Chemosensor for Fe3+ in Aqueous Media Based on a Boron–Fluorine Derivative

A fluorescent “turn‐on” probe for Fe³⁺ was investigated in an aqueous system based on a boron 2‐(2′‐pyridyl) imidazole complex (BOPIM‐dma). BOPIM‐dma shows weak or no fluorescence in polar solvents due to twisted intramolecular charge transfer, but the addition of Fe³⁺ to BOPIM‐dma leads to fluorescence switch‐on responses. The binding is highly selective to Fe³⁺ over other metal ions, indicating that BOPIM‐dma is a chemodosimeter for Fe³⁺. Furthermore, the existence of S₂O₃²⁻ could much enhance and stabilize the emission significantly, indicating that the BOPIM‐dma/Fe³⁺/S₂O₃²⁻ complexes are a strong fluorescence system, and can be used as a sensitive detector for Fe³⁺, with the limit of detection of 6.0 × 10⁻⁷ mol L⁻¹.     

Determination of Er3+ using a highly selective and easy-to-synthesize fluorescent probe based on Rhodamine 6G

A inducible fluorescent ligand 2-(2-(2-amino-ethylamino) ethyl)-3′,6′- bis (ethylamino)-2′, 7′-dimethy-lspiro[isoindoline-1,9′-xanthen]-3-one was synthesized and used as a fluorescent probe to detect Er³⁺. Er³⁺ could induce the structural transformation of the fluorescent ligand, resulting in a sharp fluorescence emission in a buffered solution. The fluorescence intensity of the fluorescent ligand was enhanced quantitatively with an increase in the concentration of erbium ion. The detection limit of Er³⁺ was 3.0 × 10^?10 mol L^?1 (50 ng L^?1) under optimized conditions. The method applied for the determination of Er³⁺ in four alloy samples had achieved satisfactory results.     

A novel turn-on fluorescent probe for Hg2+ detection based on rhodamine B spirolactam derivative

ABSTRACT

In this work, a new turn-on fluorescent probe 1 for Hg²⁺ ions detection based on rhodamine B spirolactam was reported. Among tested metal ions, probe 1 shows high selectivity towards Hg²⁺ in the the mixture solution of methanol and 0.02 M HEPES buffer (V/V = 9:1, pH = 7.2). No absorption and emission band of probe 1 was observed in the range from 450 to 700 nm. While only addition of Hg²⁺ to probe 1 could lead to appearance of a new absorption band centered at 553 nm and a fluorescence emission band around 577 nm upon excitation at 520 nm. Moreover, it exhibits excellent linear relationship (R² = 0.9993) between fluorescence intensity at 577 nm and the concentration of Hg²⁺ from 1.6 to 32 μM. The sensing mechanism was proven to be spirolactam ring open induced by Hg²⁺ through ¹H NMR, MS, absorption and fluorescence spectra. In addition, probe 1 could detect Hg²⁺ in real water samples and on filter paper, which demonstrates its application in environment science.     

2-Aminopyridine derivative as fluorescence ‘On–Off’ molecular switch for selective detection of Fe3+/Hg2+

2-Amino-6-methyl-4-phenyl-nicotinonitrile 1, a 2-aminopyridine-based fluorescent compound, was found to be a fluorescent chemosensor for the detection of Fe³⁺ and Hg²⁺ ions over a number of other metal ions. Compound 1 was synthesized in one step using a multicomponent reaction, and characterized using common spectroscopic tools. During Fe³⁺/Hg²⁺ sensing the compound 1 followed a ‘switch-off’ mechanism. Further, compound 1 could sense Fe³⁺ over Hg²⁺ by its distinct absorption and fluorescence quenching behaviors. 1:1 complex formation of 1 with Fe³⁺ and Hg²⁺ was clearly understood from Job’s plot. The present work brings additional evidence on the importance of multicomponent reactions which could lead to the development of fluorescence chemosensor in one step for the selective detection of biologically important metal ions.     

Anthrone-spirolactam and quinoline hybrid based sensor for selective fluorescent detection of Fe3+ ions

The synthesis of a novel, and highly selective Fe³⁺ ion sensor based on anthrone-spirolactam and its quinoline hybrid ligand is reported. The designed ligand displayed selective detection of Fe³⁺ ions with enhanced fluorescence emission. The complexation of Fe³⁺ ion led to a red shift of 32 nm from 420 nm to 452 nm, and a several fold increase in intensity with fluorescent green emission. The complexation (detection) of Fe³⁺ ions with ligand resulted in chelation enhanced fluorescence and intramolecular charge transfer through the inhibition of C=N isomerization. This hybrid sensor shows high sensitivity and selectivity, spontaneous response, and works on a wide pH range a minimum detection limit of 6.83 × 10⁻⁸ M. Importantly, the sensor works through the fluorescence turn-on mechanism that overcomes the paramagnetic effect of Fe³⁺ ions. The binding mechanism between the ligand and the Fe³⁺ ions was established from the Job's plot method, optical studies, Fourier transfor infrared spectroscopy, NMR titration, fluorescence life-time studies, and density functional theory optimization. The sensor displayed excellent results in the quantification of Fe³⁺ ions from real water samples. Furthermore, due to its biocompatibility nature, fluorescent spotting of Fe³⁺ ions in live cells revealed its bioimaging applications.     

A Selective Colorimetric and Fluorescent Chemodosimeter for Fe(III) Ion Based on Hydrolysis of Schiff Base

An efficient colorimetric and fluorescent chemodosimeter for Fe³⁺ ions has been developed. The visual and fluorescent behaviors of the receptor toward various metal ions were investigated. The receptor shows exclusive response toward Fe³⁺ ions and also distinguishes Fe³⁺ from other cations by color change and unusual fluorescence enhancement in aqueous solution (DMSO/H₂O = 4/1, v/v). Thus, the receptor can be used as a colorimetric and fluorescent sensor for the determination of Fe³⁺ ion. The visual color detection limit and the fluorescence detection limit of the receptor towards Fe³⁺ are (1.42 ± 0.01) × 10^‐6 M and (7.57 ± 0.04) × 10^‐8 M, respectively. The fluorescence microscopy experiments showed that the receptor is efficient for detection of Fe³⁺ in vitro, developing a good image of the biological organelles. The sensing mechanism is proven to be a hydrolysis process     

A Logic Fluorescent Chemosensor Based on Eu3+ Functionalized Cd-MOFs for Sensing Fe3+ and Cu2+ Synchronously

One of the most critical and yet unsolved issues is the effective monitoring of multiple heavy metal ions in complex systems through their specific function in fluorescence detection. In this work, luminescence-active cadmium base metal-organic frameworks (Cd-MOFs) based on the planar and rigid π-conjugated structure ligand benzo-(1,2;3,4;5,6)-tris (thiophene-2’-carboxylic acid) (H₃BTTC) was chosen. A series of sensing experiments demonstrated that the Cd-MOFs exhibits selective and sensitive response for Fe³⁺ and Eu³⁺ through fluorescence “turn off” and “antenna effect” respectively. In addition, the encapsulation of Eu³⁺ inside the Cd-MOFs (Eu³⁺@Cd-MOFs) led to an excellent probe with dual emission. To this end, a programmable fluorescence platform was developed to detect Fe³⁺ and Cu²⁺, in which the emission peaks of both the ligand and Eu³⁺ are completely quenched by Fe³⁺. The ratiometric detection of Cu²⁺ leads to a decrease in Eu³⁺ emission, while the ligand emission remains stable. To demonstrate the strategy, the fluorescence (Output) of Cd-MOFs, Eu³⁺@Cd-MOFs, and the analytes (Eu³⁺, Fe³⁺, and Cu²⁺, input) achieved elementary Boolean logic operations (OR, NOR, AND) and they constitute a logic fluorescent chemosensor to analyze Fe³⁺ and Cu²⁺ synchronously.     

A new Schiff base fluorescent indicator for the detection of Mg<Superscript>2+</Superscript> and its application to real samples

A new Schiff base fluorescence probe, 3-Allylsalicylaldehyde salicylhydrazone (L), for Mg²⁺ was designed and synthesized. The fluorescence of the sensor L was enhanced remarkably by Mg²⁺ with 2:1 binding ratio, and the binding constant was determined to be 1.02 × 10⁷ M^?1. Probe L had high sensitivity for Mg²⁺ in a solution of DMF/water (4:1, v/v, pH 7.5), and the detection limit was 4.88 × 10^?8 mol/L. Common coexistent metal ions, such as K⁺, Na⁺, Ag⁺, Ca²⁺, Zn²⁺, Ba²⁺, Bi²⁺, Cu²⁺, Ni²⁺, Hg²⁺, Fe³⁺ , and Al³⁺, showed little or no interference on the detection of Mg²⁺ in solution. The fluorescence probe L, which was successfully used for the determination of trace Mg(II) in real samples, was shown to be promising for liquid-phase extraction coupled with fluorescence spectra.     

A functional applied material on recognition of metal ion zinc based on the double azine compound

A colorimetric and fluorescent probe L has been designed and synthesized, which bearing the double azine moiety and showing a detection limit of 2.725 × 10^?7 M towards Zn²⁺. Based on the basic recognition mechanism of ESIPT and CHEF effect, the L has high selectivity and sensitivity to only Zn²⁺ (not Fe³⁺, Hg²⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Cr³⁺, and Mg²⁺) within the physiological pH range (pH = 7.0–8.4) and showed a fluorescence switch. Moreover, this detection progress occured in the DMSO/H₂O ～ HEPES buffer (80/20, v/v; pH 7.23) solution which can conveniently used on test strip.     

Salicylaldimine‐functionalized poly(m‐phenyleneethynylene) as turn‐on chemosensor for ferric ion

A new turn on fluorescent probe for ferric ion based on poly(m‐phenyleneethynylene salicylaldimine) ( PPE‐IM ) has been developed. The preparation of PPE‐IM involves post‐polymerization functionalization of the corresponding polymeric amine, PPE‐AM , via the condensation with salicylaldehyde. The degree of polymerization of both PPE‐IM and PPE‐IM is 17 with polydispersity index of 1.5. In aqueous solution, the polymeric PPE‐IM is highly stable unlike its small molecule analog which is gradually hydrolyzed. The weak fluorescence of initial PPE ‐ IM (λ_em = 470) is greatly enhanced by 300 folds upon the addition of Fe³⁺. The ¹H NMR reveals that the fluorescence enhancement is caused by Fe³⁺‐induced hydrolysis of the imine group. The sensing system shows a detection limit of 0.14 μM of Fe³⁺. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1155–1161     

Novel naphthalene-based fluorescent chemosensors for Cu2+ and Fe3+ in aqueous media

Three novel compounds bearing 2,7-dihydroxylnaphthalene capable of detecting Cu²⁺ or Fe³⁺ have been synthesised based on photoinduced electron transfer. The ability of these compounds for complex transition metal ions has been studied, and complex stoichiometry for Cu²⁺ and Fe³⁺ complex has been determined in the Tris–HCl (0.01 M DMSO/H₂O (v/v) 1:1, buffer, pH 7.4) solution system by fluorescence titration experiments. These chemosensors form a 1:1 complex with Cu²⁺ or Fe³⁺ and show a fluorescent quenching with a binding constant of (4.46 ± 0.29) × 10³ and (8.04 ± 0.26) × 10⁴, respectively.     

Carbazole‐based conjugated polymer covalently coated Fe3O4 nanoparticle as efficient and reversible Hg2+ optical probe

A type of fluorescent–magnetic dual‐function nanocomposite, Fe₃O₄@SiO₂@P‐2, was successfully obtained by Cu⁺‐catalyzed click reaction between acetylene (C?C? H)‐substituted carbazole‐based conjugated polymer ( P‐2) and azide‐terminated silica‐coated magnetic iron oxide nanoparticles (Fe₃O₄@SiO₂–N₃). Optical and magnetization analyses indicate that Fe₃O₄@SiO₂@P‐2 exhibits stable fluorescence and rapid magnetic response. The fluorescence of Fe₃O₄@SiO₂@P‐2 was quenched significantly in the presence of I^? and gave a detection limit (DL) of ～8.85 × 10^?7 M. Given the high binding constant and matching ratio between Hg²⁺ and I^?, the fluorescence of Fe₃O₄@SiO₂@P‐2/I^? complex recovered efficiently with the addition of Hg²⁺. A DL of ～4.17 × 10^?7 M was obtained by this probing system. Recycling of Fe₃O₄@SiO₂@P‐2 probe was readily achieved by simple magnetic separation. Results indicate that Fe₃O₄@SiO₂@P‐2 can be used as an “on–off–on” fluorescent switchable and recyclable Hg²⁺ probe. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3636–3645     

Novel fluorescent supramolecular polymer metallogel based on Al3+ coordinated cross-linking of quinoline functionalized- pillar[5]arene act as multi-stimuli-responsive materials

A novel supramolecular polymer metallogel ( QP5-AlG ) has been constructed by cross-linking of bis-8-hydroxyquinoline functionalized pillar[5]arene with Al³⁺. The metallogel QP5-AlG shows light blue aggregation induced emission (AIE) in DMSO/H₂O binary solution. Interestingly, the QP5-AlG shown multiple external stimuli-responsive behaviors such as temperature, guest compounds, acid, base and so on. The QP5-AlG can be used as a fluorescent material for detection of Fe³⁺, F^-, trifluoroacetic acid (TFA) and triethylamine (TEA) by different fluorescence states (“on” or “off”). The (limits of lowest detection) LOQs of the QP5-AlG for Fe³⁺, F^-, TFA and TEA are in the range of 4.39 × 10^-9-1.82 × 10^-7 M. More interestingly, a QP5-AlG -based rewritable and erasable fluorescent platform was demonstrated, which offers a potential testbed for performing “write-erase-write” cycles multiple times. This study provides insight into the development of novel multifunctional supramolecular materials.