Porous organic polymer nanotubes as luminescent probe for highly selective and sensitive detection of Fe~(3+)

Two porous organic polymer nanotubes(PNT-2 and PNT-3) were synthesized via Ni-catalyzed Yamamoto reaction, using2,4,6-tris-(4-bromo-phenyl)-[1,3,5]-triazine(TBT) as one monomer, and 2,7-dibromopyrene(DBP) or 1,3,6,8-tetrabromopyrene(TBP) as another monomer. The scanning electron microscope(SEM) images show that both PNT-2 and PNT-3 possess clear hollow tube structures. Luminescent measurements indicate that both PNT-2 and PNT-3 can serve as luminescent probe for highly selective and sensitive detection of Fe~(3+) by luminescent quenching effect. Absorption competition quenching(ACQ) mechanism is also proposed to explain luminescent quenching behavior, i.e., the overlap of the UV-spectra between Fe~(3+) and PNTs causes the energy competition, and therefore leads to luminescent quenching. Moreover, both PNT-2 and PNT-3 still show high selectivity and sensitivity for sensing Fe~(3+) in 10% ethanol aqueous solution, which means that the two porous PNTs are promising candidates as luminescent probes for detecting Fe~(3+) in practical applications.     

Exploring fluorescent covalent organic frameworks for selective sensing of Fe<Superscript>3+</Superscript>

Covalent organic frameworks (COFs) have been widely applied in gas capture and separation, but the fluorescent property of COFs with large π-conjugated system tends to be underexplored. Here we report the fluorescent properties of several COFs including TaTa, DhaTab, TRITER-1 and TzDa and the effect of metal ions of Na⁺, Mg²⁺, K⁺, Ca²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺, Cd²⁺ and Fe³⁺ on the fluorescence of these COFs. The results show that only Fe³⁺ significantly quenched the fluorescence of the studied COFs. The possibility of the four COFs for selective sensing of Fe³⁺ was demonstrated. The possible mechanism of the effect of Fe³⁺ on the fluorescence of the COFs was based on the absorption competition quenching.     

Selective extraction of Fe<Superscript>3+</Superscript> ions from Fe<Superscript>3+</Superscript>-Zn<Superscript>2+</Superscript> mixture with phosphate sorbents

The absorption of Fe³⁺ ions from Fe³⁺-Zn²⁺ mixture with zinc and calcium phosphates was studied.     

Effect of Ca<Superscript>2+</Superscript>, Mg<Superscript>2+</Superscript>, Fe<Superscript>3+</Superscript>, and Al<Superscript>3+</Superscript> Ions on the Deposition of Electrolytic Manganese Dioxide from Chloride Solutions

The effect of Ca²⁺, Mg²⁺, Fe³⁺, and Al³⁺ ions on the deposition of electrolytic manganese dioxide from chloride solutions was studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 5, 2005, pp. 751–754.Original Russian Text Copyright © 2005 by Kolosnitsyn, Minnikhanova, Karaseva, Dmitriev, Muratov.     

Extraction of metal ions (Fe<Superscript>3+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript>, Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript>) using immobilized-polysiloxane iminobis(n-2-aminophenylacetamide) ligand system

A new insoluble solid functionalized ligand system bearing chelating ligand group of the general formula P-(CH₂)₃-N[CH₂CONH(C₆H₄)NH₂]₂, where P represents [Si–O] _n polysiloxane network, was prepared by the reaction of the immobilized diethyliminodiacetate polysiloxane ligand system, P-(CH₂)₃N(CH₂CO₂Et)₂ with 1,2-diaminobenzene in toluene. ¹³C CP-MAS NMR, XPS and FTIR results showed that most ethylacetate groups (–COOEt) were converted into the amide groups (–N–C=O). The new functionalized ligand system exhibits high capacity for extraction and removal of the metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) with efficiency of 95–97% after recovery from its primary metal complexes. This functionalized ligand system formed 1:1 metal to ligand complexes.     

Protein-templated Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> microspheres for highly sensitive amperometric detection of dopamine

The authors describe an amperometric sensor for dopamine (DA) by employing olive-like Fe₂O₃ microspheres (OFMs) as the electrocatalyst for DA oxidization. The OFMs were prepared by using a protein templated method. The structure and properties of the OFMs were characterized by scanning electron microscopy, X-ray powder diffraction, energy dispersive x-ray spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The OFMs possess excellent catalytic activity towards DA oxidization due to their unique morphology. The sensor responds to DA within less than 5 s. The sensor, best operated at a voltage of +0.2 V (vs. SCE) responds linearly in the 0.2 to 115 μM DA concentration range and has a 30 nM detection limit. The selectivity, reproducibility and long-term stability of the sensor are acceptable. It performs well when applied to spiked human urine samples.

Open image in new window

Graphical abstract Olive-like Fe₂O₃ microspheres (OFMs), synthesized using egg white as template, display excellent catalytic activity towards dopamine (DA) oxidization due to their unique morphology. They were applied for DA detection using the amperometric technique. The electrochemical sensor exhibited a high sensitivity and a 30 nM detection limit. DAQ: dopaquinone.

     

Tandem and transition metal-free synthesis of novel benzoimidazo-quinazoline as highly selective Hg<Superscript>2+</Superscript> sensors

A one-pot procedure for the synthesis of novel planar aza-heterocycles possessing good fluorescence potencies was described. These benzo-imidazopyrimido[4,5-b]quinolone derivatives came from the reaction of 2-chloroquinoline-3-carboxaldehydes and 2-aminobenzimidazole using K₂CO₃ in DMF. The fluorescence study of these conjugated systems was also considered, which revealed that they have highly selective sensing of mercury. Consequently, to investigate another aspect of the reaction, a three-component reaction was developed by adding malononitrile to the aforementioned starting materials in the presence of l-proline under reflux condition in H₂O/EtOH to provide amino-quinolin-3-yl-dihydrobenzo-imidazo-pyrimidine-3-carbonitriles in good yields.     

Formation of coordination compounds with aniline in the interlayer space of Ca<Superscript>2+</Superscript>-, Cu<Superscript>2+</Superscript>- and Fe<Superscript>3+</Superscript>-exchanged montmorillonite

The influence of Ca²⁺-, Cu²⁺- and Fe³⁺-exchanged montmorillonite (MMT) on the type of interaction with aniline in the interlayer space of MMT has been studied by means of X-ray powder diffraction and infrared spectra. Results of X-ray diffraction showed that aniline was successfully intercalated into the interlayer space of MMT. Based on IR spectra evaluation, aniline was indirectly coordinated through a water-bridge in Ca²⁺- and Fe³⁺-MMT and it was indirectly coordinated through a water-bridge as well as protonated in Cu²⁺-MMT (the spectrum of protonated aniline showed deformation and changes in the NH ₃ ⁺ absorption at approximately 1521 cm^?1). It is important to point out that Cu²⁺-MMT indirect coordination and protonation occur simultaneously.     

Water-soluble polymers as chelating agents for the deposition of Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript>:LiNbO<Subscript>3</Subscript> waveguiding films

Compared to other oxide materials, the sol-gel deposition of an optically transparent LiNbO₃ waveguiding film of sufficient thickness (approx. 1?μm) is complicated by the presence of a highly hydrolyzing Nb(V) in the starting solution. Thicker films require more concentrated solutions that are not easily achieved for such ions. This problem may be solved using strong chelating agents such as water-soluble polymers. To prepare a stable Er(III)/Yb(III)/Li(I)/Nb(V)/2-methoxyethanol solution with high metal concentration, we tested three such polymers: polyethylene glycol (PEG), polyacrylic acid (PAA) and polyvinyl alcohol (PVA), and compared them with already used polyvinylpyrrolidone (PVP). The solutions were spin-coated on crystalline sapphire substrates under a multi-step heating-deposition regime. Apart from Er³⁺/Yb³⁺ photoluminescence properties, we evaluated the influence of the film microstructure (SEM, AFM) on optical transparency and waveguiding ability in the UV/Vis/NIR region (transmission and m-line spectroscopy). Among the newly tested polymers, only PEG was able to prevent Nb(V) hydrolysis up to a maximum metal concentration of 0.6?mol/L. For PEG and PVP, the crystallization temperature of the deposited films (between 700?°C and 1000?°C) was compared. After further optimization of the heating-deposition process, we were able to prepare a transparent Er³⁺/Yb³⁺:LiNbO₃ film thick enough to guide an optical signal in the NIR region. Thus, the use of PEG results is one of the very few non-hydrolytic sol-gel methods suitable for the preparation of not only luminescent, but also waveguiding Er³⁺/Yb³⁺:LiNbO₃ structures.

Open image in new window

     

Colorimetric chemosensor for Fe<Superscript>2+</Superscript> and Fe<Superscript>3+</Superscript> based on a ternary mixture of an anionic dye,a cationic polyelectrolyte,and a metal chelator in aqueous solution

A new colorimetric chemosensor based on a simple ternary mixture of an anionic dye, pyrogallol red (PR), a cationic polyelectrolyte, poly(diallyldimethylammonium chloride) (PDADMAC), and a metal chelator, N-(2-hydroxyethyl) ethylenediaminetriacetic acid (HEDTA) for the colorimetric detection of Fe²⁺ and Fe³⁺ has been developed in an aqueous solution buffered at pH 5. Upon addition of Fe²⁺ or Fe³⁺ to the mixture, the absorption spectra showed a bathochromic shift; correspondingly, the solution color changed from red to blue, whereas other metal ions basically resulted in insignificant spectral and color changes. From the competitive experiments, no obvious interferences for the colorimetric detection of Fe²⁺ and Fe³⁺ were observed in the presence other metal ions. The results indicated that the mixture could be used as a potential Fe²⁺ and Fe³⁺ colorimetric and naked eye chemosensor in aqueous media. This research demonstrates that the ternary ensemble consisted of an organic dye, an oppositely charged polyelectrolyte, and a metal chelator is a versatile and convenient tool for the facile preparation of a novel chemosensor system.     

Indirect detection of protein-Metal binding: Interaction of serum transferrin with In<Superscript>3+</Superscript> and Bi<Superscript>3+</Superscript>

Transferrins comprise a class of monomeric glycoproteins found in all vertebrates, whose function is iron sequestration and transport. In addition to iron, serum transferrin also binds a variety of other metals and is believed to provide a route for the in vivo delivery of such metals to cells. In the present study, ESI MS is used to investigate interactions between human serum transferrin and two nonferrous metals, indium (a commonly used imaging agent) and bismuth (a component of many antiulcer drugs). While the UV-Vis absorption spectroscopy measurements clearly indicate that both metals bind strongly to transferrin in solution, the metal-protein complex can be detected by ESI MS only for indium, but not for bismuth. Despite the apparently low stability of the transferrin-bismuth complex in the gas phase, presence of such complex in solution can be established by ESI MS indirectly. This is done by monitoring the evolution of charge state distributions of transferrin ions upon acid-induced protein unfolding in the presence and in the absence of the metal in solution. The anomalous instability of the transferrin-bismuth complex in the gas phase is rationalized in terms of conformational differences between this form of transferrin and the holo-forms of this protein produced by binding of metals with smaller ionic radii (e.g., Fe3+ and In3+). The large size of Bi3+ ion is likely to prevent formation of a closed conformation (canonical structure of the holo-protein), resulting in a non-native metal coordination. It is suggested that transferrin retains the open conformation (characteristic of the apo-form) upon binding Bi3+, with only two ligands in the metal coordination sphere provided by the protein itself. This suggestion is corroborated by the results of circular dichroism measurements in the near-UV range. Since the cellular consumption of metals in the transferrin cycle critically depends upon recognition of the holo-protein complex by the transferrin receptor, the noncanonical conformation of the transferrin-bismuth complex may explain very inefficient delivery of bismuth to cells even when a high dosage of bismuth-containing drugs is administered for prolonged periods of time.     

Two novel coordination polymers: Synthesis,structure, luminescent properties,and selective sensing of Cu<Superscript>2+</Superscript> and Mn<Superscript>2+</Superscript> ions

Two novel coordination polymers, namely {[Co(Ttac)_0.5(1,4-Bib)(H₂O)] · H₂O}_n (I) and {[La(HTtac)₂(2H₂O)] · H₂O}n (II) (H4Ttac = 4,5-di(3'-carboxylphenyl)-phthalic acid, 1,4-Bib = 1,4-bis(1-imidazoly) benzene), have been designed and successfully prepared via hydrothermal process, and characterized by elemental analyses, IR spectroscopy, and single crystal X-ray diffraction (CIF files CCDC nos. 1039298 (I), 1039300 (II)). Structural analysis reveals that the H₄Ttac ligands adopt different coordination modes in the as-synthesized I and II, and thus give rise to the targeted coordination polymers with different configurations. It is worth mentioning that, coordination polymer I is assembled from low-dimensional structures into three-dimensional (3D) via π···π stacking interactions, while three-dimensional coordination polymer II is formed by covalent bonds. Luminescent properties of coordination polymer II have been studied at ambient temperature. Significantly, luminescent measurement indicates that coordination polymer II may be acted as potential luminescent recognition sensors towards Cu²⁺ and Mn²⁺ ions.     

Synthesis and mesopore-micropore structure characterization of nanodisperse Fe<Superscript>3+</Superscript> hydrogels (xerogels)

A preparation procedure was developed, and samples of nanodisperse Fe³⁺ hydroxide with a narrow particle-size distribution (2.5–3.5 nm) were synthesized. The occurrence of a substructure in the bulk of Fe³⁺ hydroxide nanoparticles was detected for the first time using light-field and dark-field transmission electron microscopy. It was found that structurally ordered regions with sizes of ～1.0 nm, which were disoriented with respect to each other at angles of a few degrees, occurred in the bulk of the nanoparticles. The empirical formula of nanodisperse iron hydroxide was ～Fe₂O₃ · 1.8H₂O; the structure of this hydroxide contained crystal water, OH^?, and O^2?. The coordination number of Fe³⁺ cations with respect to oxygen was 6. It was found that both structural and nonstructural water can be removed almost completely from the bulk of nanoparticles in the course of sample heating to 150–250°C in a vacuum with the retention of their amorphous character and observed sizes. In the course of dehydration, the mutual mobility of nanoparticles within aggregates was retained in Fe³⁺ xerogels; this resulted in a decrease in the total pore volume, whereas the volume of mesopores with diameters of 3.4–3.5 nm progressively increased. The micropore structure of the samples of nanodisperse iron hydroxides was studied by the molecular probe method using the low-temperature (77 K) sorption of nitrogen and molecular hydrogen. It was found that, along with micropores of volume ～0.02 cm³/g, which are accessible to both of the sorbates, the sorption of H₂ exhibited an additional specific absorption of 1.0–1.7 cm³(STP)/g, which can be interpreted as an additional ultramicropore volume accessible to only hydrogen molecules.     

Electrochemical properties of <Emphasis Type="Italic">n</Emphasis>-sulfonatothiacalyx[4]arene complexes with Fe<Superscript>3+</Superscript> and [Co(dipy)<Subscript>3</Subscript>]<Superscript>3+</Superscript> ions

The electrochemical properties of n-sulfonatothiacalyx[4]arene (H₄XNa₄) complexes with [Co(dipy)₃]³⁺ and Fe³⁺ ions were studied by means of cyclic voltammetry in aqueous solution at pH 2.5. The observed single-electron reduction of [Co(dipy)₃]³⁺ bound extraspherically to the upper rim and Fe³⁺ ion bound intraspherically to the lower rim of n-sulfonatothiacalyx[4]arene in binary [Co(dipy)₃]³⁺ · H₃X^5?, H₃X^5? · Fe³⁺, and ternary [Co(dipy)₃]³⁺ · H₃X^5? · Fe³⁺ heterometal complexes was more difficult than in the free state. The reversible single-electron transfer to the metal ion results in lower binding energy ([Co(dipy)₃]³⁺, ΔΔG ₀ = 3.9 kJ/mol) or in full fast dissociation of the complex (Fe³⁺). The ternary complex in the solution forms the aggregates, in which inner encapsulated Fe(III) and Co(III) ions are not reduced on the electrode. Their quantitative reduction takes place by the relay mechanism of intra- and intermolecular electron transfer through electrochemically generated [Co(dipy)₃]²⁺ outer ions.     

Scalar-relativistic 5f-in-core pseudopotentials and core-polarization potentials for trivalent actinides: calibration calculations for Ac<Superscript>3+</Superscript>, Cm<Superscript>3+</Superscript> and Lr<Superscript>3+</Superscript> complexes

The performance of recently proposed 5f-in-core pseudopotentials for the trivalent actinides was investigated in calculations for model complexes An³⁺L ⁿ⁻ for three selected actinides (An³⁺ = Ac³⁺, Cm³⁺, Lr³⁺) and eight simple ligands with atoms from the first three periods of the table of elements (L ⁿ⁻ = F⁻, Cl⁻, OH⁻, SH⁻, CO, NH₂⁻, H₂O, H₂S, NH₃). Results of Hartree-Fock and Coupled Cluster with singles, doubles and perturbative triples calculations using basis sets of quadruple-zeta quality are compared to corresponding reference data obtained with scalar-relativistic energy-adjusted 5f-in-valence small-core pseudopotentials. The inclusion of core-polarization potentials in the 5f-in-core pseudopotential calculations and corrections of the basis set superposition error by the counterpoise correction leads to very good agreement between the 5f-in-valence and 5f-in-core pseudopotential results for bond lengths, bond angles and binding energies. Results from 5f-in-core pseudopotential calculations using different density functionals also show reasonable agreement with the more rigorous Coupled Cluster results. It is argued that the An 5f rather than the An f population is a useful criterion for the applicability of a specific An 5f-in-core pseudopotential.     

Hydrolytic Behavior of La<Superscript>3+</Superscript> and Sm<Superscript>3+</Superscript> at Various Temperatures

The hydrolytic species of lanthanide ions, La³⁺ and Sm³⁺, in water at I = 0.1 mol·dm^?3 KCl ionic strength and temperatures of 298.15, 310.15 and 318.15 K were investigated by potentiometry. The hydrolytic species were modeled by the HySS simulation program. From the results, the hydrolytic species of each metal ion at different temperatures were calculated using the program HYPERQUAD2013. The hydrolysis constants (log₁₀ β) of [La(OH)]²⁺ and La(OH)₃ were calculated as ?8.52 ± 0.46, ?26.84 ± 0.48, and log₁₀ β values of [Sm(OH)]²⁺, [Sm(OH)₂]⁺, Sm(OH)₃ were calculated as ?7.11 ± 0.21, ?15.84 ± 0.25 and ?23.44 ± 0.52 in aqueous media at 298.15 K, respectively. The dependence of the hydrolysis constants on the temperature allowed us to calculate the enthalpy, entropy, and Gibbs energy of hydrolysis values of each species.     

Photoluminescence in Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript>-doped silica-titania inverse opal structures

Er³⁺ photoluminescence (PL) and Yb³⁺ → Er³⁺ energy transfer (ET) phenomena in the near infrared (NIR) have been studied in three-dimensional (3-D) inverse opal (IO) structures synthesized by a colloidal/sol–gel route, starting with the deposition of polystyrene microsphere (235 nm and 460 nm diameter) direct opal templates by convective self-assembly, followed by infiltration of the interstices with Er³⁺/Yb³⁺-doped silica, titania and silica-titania sols and heat-removal of the polymeric template material. The crystalline quality of the IOs has been optimized through suitable substrate treatments, plus the control of temperature and humidity during deposition of the templates. The structural and optical properties of the 3-D opal and IO structures have been studied by field emission scanning electron microscopy and visible-NIR reflection spectroscopy, in order to assess the relationship between microstructure and the photonic properties obtained. Photonic bandgaps have been evidenced by the corresponding stop bands in the reflection spectra. The shape and the intensity of the Er^{3+ 4}I_13/2 → ⁴I_15/2 transition at ~1.5 μm were modified in most IOs relatively to similar matrix deposits without a photonic crystal structure, particularly in the case of pure silica and titania IOs, where the PL peak narrowed and intensified. It was not possible at this stage to detect Yb³⁺ → Er³⁺ ET phenomena in the IOs structures.     

Synthesis of Fe<Superscript>3+</Superscript> doped ordered mesoporous TiO<Subscript>2</Subscript> with enhanced visible light photocatalytic activity and highly crystallized anatase wall

Fe³⁺ doped mesoporous TiO₂ with ordered mesoporous structure were successfully prepared by the solvent evaporation-induced self-assembly process using P123 as soft template. The properties and structure of Fe³⁺ doped mesoporous TiO₂ were characterized by means of XRD, EPR, BET, TEM, and UV–vis absorption spectra. The characteristic results clearly show that the amount of Fe³⁺ dopant affects the mesoporous structure as well as the visible light absorption of the catalysts. The photocatalytic activity of the prepared mesoporous TiO₂ was evaluated from an analysis of the photodegradation of methyl orange under visible light irradiation. The results indicate that the sample of 0.50%Fe–MTiO₂ exhibits the highest visible light photocatalytic activity compared with other catalysts.