Intercalation-etching of graphene on Pt(111) in H_2 and O_2 observed by in-situ low energy electron microscopy

Graphene layers are often exposed to gaseous environments in their synthesis and application processes, and interactions of graphene surfaces with molecules particularly H_2 and O_2 are of great importance in their physico-chemical properties. In this work, etching of graphene overlayers on Pt(111) in H_2 and O_2 atmospheres were investigated by in-situ low energy electron microscopy. Significant graphene etching was observed in 10~(-5) Torr H_2 above 1023 K, which occurs simultaneously at graphene island edges and interiors with a determined reaction barrier at 5.7 eV. The similar etching phenomena were found in 10.7 Torr O_2 above 973 K, while only island edges were reacted between 823 and 923 K. We suggest that etching of graphene edges is facilitated by Pt-aided hydrogenation or oxidation of edge carbon atoms while intercalation-etching is attributed to etching at the interiors at high temperatures. The different findings with etching in O_2 and H_2 depend on competitive adsorption, desorption, and diffusion processes of O and H atoms on Pt surface, as well as intercalation at the graphene/Pt interface.     

X-ray photoelectron study of the interaction of H<Subscript>2</Subscript> and H<Subscript>2</Subscript>+O<Subscript>2</Subscript> mixtures on the Pt/MoO<Subscript>3</Subscript> model catalyst

The effects of H₂ and H₂ + O₂ gas mixtures of varying composition on the state of the surface of the Pt/MoO₃ model catalyst prepared by vacuum deposition of platinum on oxidized molybdenum foil were investigated by X-ray photoelectron spectroscopy (XPS) at room temperature and a pressure of 5–150 Torr. For samples with a large Pt/Mo ratio, the XP spectrum of large platinum particles showed that the effect of hydrogen-containing mixtures on the catalyst was accompanied by the reduction of molybdenum oxide. This effect results from the activation of molecular hydrogen due to the dissociation on platinum particles and subsequent spill-over of hydrogen atoms on the support. The effect was not observed at low platinum contents in the model catalyst (i.e., for small Pt particles). It is assumed for the catalyst that the loss of its hydrogen-activating ability is a consequence of the formation of platinum hydride. Possible participation of platinum hydride as intermediate in hydrogen oxidation to H₂O₂ is discussed.     

Kinetics of processes occurring at a H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>/Pt,H<Subscript>2</Subscript> interface depending on the platinum content on the electrode

Kinetics of processes occurring at H⁺/solid electrolyte/Pt, H₂ three-phase interface are studied subject to the platinum content on the electrode. The study was performed with model electrochemical cells PbO₂/H₃PW₁₂O₄₀/Pt with different platinum content at the working electrode that consisted of platinum deposited onto the E-Tek LT1200-N carbon-nanotubes paper. On the basis of the obtained results, the occurring processes were practically fully separated. It is shown by the analyzing of relaxation curves that there exist at least two processes in the system: the faster one corresponds to the hydrogen reaction; the slower, to the oxygen one. The rates of both processes depend on the platinum content at the working electrode; they have an extreme at the platinum concentration of 0.5 mg/cm². Impedance data allowed revealing the processes’ limiting stages. The experimental data allowed suggesting that at low platinum content the relaxation time is determined by the electrochemical reaction rate; at higher content, by gas diffusion through the platinum dense layer.     

Thermal analysis on C<Subscript>6</Subscript>H<Subscript>10</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript>-doped MgB<Subscript>2</Subscript>

Additives to MgB₂ can improve the superconducting functional characteristics, such as critical current density (J _c) and irreversibility field (H _irr). Recently, we have shown that repagermanium (C₆H₁₀Ge₂O₇) is an effective additive, enhancing both J _c and H _irr. To look into details of the processes taking place during the reactive sintering, a thermal analysis study (0.167 K s^?1, in Ar) is reported. We used differential scanning calorimetry between 298 and 863 K and simultaneous thermogravimetric—differential thermal analysis between 298 and 1233 K. Samples were mixtures of powders with composition 97 mol% MgB₂ and 3 mol% C₆H₁₀Ge₂O₇. Up to 863 K, repagermanium decomposes by multiple steps and forms amorphous phases. A reaction with MgB₂ is not observed. Above this temperature, partial decomposition of MgB₂ occurs. Crystalline Ge and MgO are detected before formation of Mg₂Ge and MgB₄, when temperature approaches the melting point of Ge (1211 K). Carbon substitution for boron in the crystal lattice of MgB₂ is observed for samples heated above 863 K. The amount of substitutional C does not significantly change with temperature.     

A Novel Uranyl Complex with Dimeric Lacunary Polyoxoanion: [(A-α-SiW<Subscript>9</Subscript>O<Subscript>33</Subscript>)<Subscript>2</Subscript>K{UO<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)}<Subscript>2</Subscript>]<Superscript>11−</Superscript>

A novel uranyl complex with dimeric lacunary polyoxoanion like open-mouthed clam, Na₅[(A-α-SiW₉O₃₃H₃)₂K{UO₂(H₂O)}₂], was prepared and characterized by elemental analysis, infrared and ultraviolet–visible spectroscopy and single crystal X-ray diffraction. In the anion, two A-α-SiW₉O₃₄¹⁰⁻ groups share two terminal oxygen atoms O_d′ derived from removal of three corner-shared W atoms from saturated α-Keggin anion, forming a dimeric anion with an open mouth in which potassium ion and uranyl ions are coordinated. Uranium atom adopts a pentagonal bipyramidal geometry. The coordinating anions are linked by sodium ions via coordination of terminal or bridging oxygen atoms, forming two-dimensional layer arrangement. Between the layers are the hydrogen bonds from which a supramolecular architecture is created. UV–VIS spectrum gives W–O and U–O charge transfer transitions at 230–265 and 432 nm, showing the change of geometry of the polyanion and weakening of the U–O bonds of the uranyl cation. Electronic supplementary material The online version of this article () contains supplementary material, which is available to authorized users.     

Catalytic properties of Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts in the aqueous-phase reforming of ethylene glycol: Effect of the alumina support

The influence of the alumina support on the catalytic activity of Pt/Al₂O₃ catalysts in aqueous phase reforming of ethylene glycol to hydrogen was studied. The catalysts were prepared by impregnation of γ-, δ-, and α-alumina with H₂PtCl₆. The highest rate of hydrogen production (452 μmol min⁻¹ g⁻¹) obtained with the Pt/α-Al₂O₃ catalyst can be related to the highest extent of dispersion of Pt on α-Al₂O₃. XPS, TEM-EDX and TPR-H₂ measurements showed the absence of chloride-containing surface complexes in the Pt/α-Al₂O₃ catalyst. However, chloride-containing entities were found on the surface of Pt/γ-Al₂O₃ and Pr/δ-Al₂O₃ catalysts. When chloride ions are removed chlorinated Pt species facilitate the sintering of Pt crystallites and in this way affect the extent of Pt dispersion. Moreover, depending upon the particular crystalline form, alumina atoms have different coordination and alumina surfaces contain varying amounts of OH groups of different nature which affect the interaction between Pt and the support.     

Synthesis of peroxy-radical condensates from mixtures of H<Subscript>2</Subscript>+O<Subscript>2</Subscript>

One of the methods for the synthesis of peroxy-radical condensates is the condensation at liquid nitrogen temperature of an H₂+O₂ mixture dissociated in an electrical discharge at low pressure. Peroxy-radical condensates are thought to contain substantial quantities of higher hydrogen peroxides H₂O₃ and H₂O₄. The present work investigates the influence of experimental parameters on the synthesis of peroxy-radical condensates from an H₂+O₂ mixture, analyses the relevant literature, and recommends the optimal experimental conditions for the synthesis. The synthesis is carried out in a U-tube electrical discharge reactor (inner diameter ∼15 mm), immersed in liquid nitrogen, at rather low pressure (0.5–1 Torr). The maximum conversion of initial O₂ into higher hydrogen peroxides was observed at a composition of initial gas mixture of 66.7% H₂ + 33.3% O₂.     

Study on chemisorption of H<Subscript>2</Subscript>, O<Subscript>2</Subscript>, CO and C<Subscript>2</Subscript>H<Subscript>4</Subscript>on Pt-Ag/SiO<Subscript>2</Subscript>catalysts by microcalorimetry and FTIR

Adsorption microcalorimetry has been employed to study the interaction of ethylene with the reduced and oxidized Pt-Ag/SiO₂catalysts with different Ag contents to elucidate the modified effect of Ag towards the hydrocarbon processing on platinum catalysts. In addition, microcalorimetric adsorption of H₂, O₂, CO and FTIR of CO adsorption were conducted to investigate the influence of Ag on the surface structure of Pt catalyst. It is found from the microcalorimetric results of H₂and O₂adsorption that the addition of Ag to Pt/SiO₂leads to the enrichment of Ag on the catalyst surface which decreases the size of Pt surface ensembles of Pt-Ag/SiO₂catalysts. The microcalorimetry and FTIR of CO adsorption indicates that there still exist sites for linear and bridged CO adsorption on the surface of platinum catalysts simultaneously although Ag was incorporated into Pt/SiO₂. The ethylene microcalorimetric results show that the decrease of ensemble size of Pt surface sites suppresses the formation of dissociative species (ethylidyne) upon the chemisorption of C₂H₄on Pt-Ag/SiO₂. The differential heat vs. uptake plots for C₂H₄adsorption on the oxygen-preadsorbed Pt/SiO₂and Pt-Ag/SiO₂catalysts suggest that the incorporation of Ag to Pt/SiO₂could decrease the ability for the oxidation of C₂H₄.     

Photocatalytic intercalated material based on HLaNb<Subscript>2</Subscript>O<Subscript>7</Subscript> as host and Cd<Subscript>0.8</Subscript>Zn<Subscript>0.2</Subscript>S as guest

A novel photocatalytic material (Pt,Cd0.8Zn0.2S)/HLaNb2O7 was fabricated by successive intercalation and exchange reactions. The (Pt,Cd0.8Zn0.2S)/HLaNb2O7 possessed a gallery height less than 0.5 nm and showed a broad absorption with wavelength over 370-500 nm. Using (Pt,Cd0.8Zn0.2S)/HLaNb2O7 as catalyst, the photocatalytic H2 evolution was more than 160 cm3·h-1·g-1 in the presence of Na2S as a sacrificial agent under irradiation with wavelength more than 290 nm from a 100-W mercury lamp. Furthermore, the catalyst showed photocatalytic activity even under visible light irradiation.     

A New Molybdophosphate Constructed From {Mo<Stack><Subscript>2</Subscript><Superscript>V</Superscript></Stack>O<Subscript>4</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>}<Superscript>2+</Superscript> and 1-Hydroxyethylidenediphosphonate

A new molybdophosphate (NH₄)₈{Mo₂^VO₄[(Mo₂^VIO₆)CH₃C(O)(PO₃)₂]₂}·14H₂O (1), has been synthesized by the reaction of {Mo₂^VO₄(H₂O)₆}²⁺ fragments with 1-hydroxyethylidenediphosphonate (hedp HOC(CH₃)(PO₃H₂)₂), and it is characterized by ³¹P NMR, IR, UV, element analysis, TG and single-crystal X-ray analysis. The structure analysis reveals that the polyoxoanion can be described as two {(Mo₂^VIO₆)(CH₃C(O)(PO₃)₂} units connected by a {Mo₂^VO₄}²⁺ moiety. In the structure, the six Mo atoms are arranged into a new “W-shaped” structure, which represents a new kind of molybdophosphate.     

Effect of the basic surface sites of carbons on the degree of dispersion of platinum catalysts prepared by H<Subscript>2</Subscript>PtCl<Subscript>6</Subscript> adsorption

In the synthesis of Pt/C catalysts via H₂PtCl₆ adsorption onto a carbon support, NH₄Cl can be formed catalytically during the reduction of the precursor with H₂ at 250°C. This compound favors the sintering of metal particles. This effect is likely due to the weakening of metal-support bonding because of NH₄Cl adsorption on the Pt surface. The sources of nitrogen and chlorine atoms are basic surface sites of the support, which contain nitrogen atoms in their structure and adsorb Cl^? ions from the precursor solution. This effect is typical of active carbons, whose surface contains chemically bound nitrogen as amino groups, and weakens as the Pt/N atomic ratio in the supported catalyst precursors is increased.     

Study on the non-isothermal kinetics of decomposition of 4Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>·2H<Subscript>2</Subscript>O<Subscript>2</Subscript>·NaCl

The non-isothermal decomposition kinetics of 4Na₂SO₄·2H₂O₂·NaCl have been investigated by simultaneous TG-DSC in nitrogen atmosphere and in air. The decomposition processes undergo a single step reaction. The multivariate nonlinear regression technique is used to distinguish kinetic model of 4Na₂SO₄·2H₂O₂·NaCl. Results indicate that the reaction type Cn can well describe the decomposition process, the decomposition mechanism is n-dimensional autocatalysis. The kinetic parameters, n, A and E are obtained via multivariate nonlinear regression. The n ^th-order with autocatalysis model is used to simulate the thermal decomposition of 4Na₂SO₄·2H₂O₂·NaCl under isothermal conditions at various temperatures. The flow rate of gas has little effect on the decomposition of 4Na₂SO₄·2H₂O₂·NaCl.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.     

Sm<Subscript>2</Subscript>S<Subscript>3</Subscript>-Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> phase diagram

The Sm₂S₃-Sm₂O₃ phase diagram was studied by physicochemical methods of analysis from 800 K up to melting. Two oxysulfides are formed in the system: Sm₁₀S₁₄O with tetragonal crystal structure (space group I41/acd; unit cell parameters: a = 1.4860 nm, c = 1.9740 nm; microhardness: H = 4700 MPa; solid decomposition temperature: 1500 K) and Sm₂O₂S with hexagonal structure (space group P-3m1; a = 0.3893 nm, c = 0.6717 nm; H = 4500 MPa; congruent melting temperature: 2370 K). Within the extent of the Sm₂O₂S-based solid solution (61–70 mol % Sm₂O₃) at 1070 K, a singular point appears at the compound composition on property-composition curves. The eutectic coordinates: 23 mol % Sm₂O₃ and 1850 K; 80 mol % Sm₂O₃ and 2290 K.     

Synthesis and structure of the polymeric complex [Ag<Subscript>2</Subscript>(Ph<Subscript>3</Subscript>P)<Subscript>2</Subscript>B<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

A method for the synthesis of the silver(I) complex with the closo-decaborate anion and triphenylphosphine [Ag₂(Ph₃P)₂B₁₀H₁₀] _n was developed and the structure of this complex was studied. The polymeric chain of the complex is formed with participation of Ag(I) atoms, which coordinate the B₁₀H₁₀²⁻ anions through the apical (B(1)–B(2), B(9)–B(10)) and equatorial (B(3)–B(6), B(5)–B(8)) edges, the metalligand bonding occurring through three-center two-electron bonds (MHB). The P atoms of two triphenylphosphine molecules are also incorporated in the inner coordination sphere of the metal: the CN of the silver atom is 4 + 1.     

Crystal structure of fluorosulfate complex compounds of indium(III) M<Subscript>2</Subscript>[InF<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)H<Subscript>2</Subscript>O] (M = K,NH<Subscript>4</Subscript>)

The crystal structures of isostructural mixed-ligand fluorosulfate complex compounds of indium(III) M₂[InF₃(SO₄)H₂O] (M = K, NH₄), formed of K⁺ cations, NH₄ ⁺ respectively, and complex [InF₃(SO₄)H₂O]^2– anions are determined. In the complex anion, the indium atom surrounded by three F atoms, the oxygen atom of the coordinated H₂O molecule, and two oxygen atoms of the bridging sulfate group forms a slightly distorted octahedron (CN 6). Via alternating bridging SO₄ groups, the polyhedra of In(III) atoms are arranged in polymer chains. The O–H???F hydrogen bonds organize the chains in a three-dimensional network. The K⁺ and NH₄ ⁺ cations are located in the structure framework and additionally strengthen it.     

Hydrothermal synthesis and crystal structure of [Ni(Bptc)<Subscript>2</Subscript>(Bimb)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>]

In the compound [Ni(Bptc)₂(Bimb)₂(H₂O)₂] (I), where H₄Bptc is 3,3′,4,4′-biphenyltetracarboxylic acid; Bimb is 4,4′-bis(1-imidazolyl)biphenyl), Ni(II) has a distorted octahedral coordination geometry, which was bonded with two N atoms from two Bimb ligands, two O atoms from two H₂Bptc²⁻ ligands and two water O atoms. The crystal structure of compound I is stabilized by the π-π-stacking and hydrogen bonds interaction.     

Adsorption of NO,NH<Subscript>3</Subscript> and H<Subscript>2</Subscript>O on V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> catalysts

The adsorption of small molecules NO, NH₃ and H₂O on V₂O₅/TiO₂ catalysts is studied with the semiempirical SCF MO method MSINDO as pre-stage for the selective catalytic reduction of NO. The mixed catalyst is represented by hydrogen-terminated cluster models. The local arrangement of the cluster atoms is in accordance with available experimental information. Partial relaxation of cluster atoms near the adsorption sites is taken into account. Calculated adsorption energies are compared with experimental literature data. Rapid convergence of computed properties with cluster size is observed. A possible reaction mechanism for the catalytic reduction of NO with NH₃ and O₂ is outlined.     

Supramolecular 2D structure of [Co(2-Me-Pyz)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>4</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

The complex [Co(2-Me-Pyz)₂(H₂O)₄](NO₃)₂ is synthesized and its structure is determined. The crystals are monoclinic: space group P2₁/n, a = 10.685(2) Å, b = 6.837(1), c = 12.515(3) Å, β = 91.84(3)°, V = 913.8(3) ų, ρ_calcd = 1.042 g/cm ³, Z = 2. The Co²⁺ ion (in the inversion center) is coordinated at the vertices of the distorted octahedron by two nitrogen atoms of methylpyrazine and four oxygen atoms of the water molecules (Co(1)–N(1) 2.180(3), average Co(1)–O(w) 2.079(3) Å, angles at the Co atom 87.9(1)–92.1(1)°). Supramolecular pseudometallocycles are formed in the structure through the O(w)–H…N(1) hydrogen bonds between the coordinated H₂O molecules and the terminal nitrogen atoms of the 2-methylpyrazine molecules. Their interaction results in the formation of supramolecular layers joined by the NO₃ groups into a three-dimensional framework.